Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publication Contribución de congreso (ConferenceOutput)

Estado del arte en robots de asistencia en hospitales, en entornos infecciosos (COVID-19), Autonomous Assistance Robot

  • Tirado-Bou, Amparo
  • Marín-Prades, Raúl
  • Sanz, Pedro J.
  • Martí, José Vicente
[Resumen] En el presente artículo mostramos el estado del arte de los sistemas robóticos que están siendo desarrollados (algunos de los cuales ya en uso), para trabajar en entornos infecciosos, por ejemplo áreas de riesgo asociadas a COVID-19. Los sistemas permiten que el personal sanitario trabaje con mayor seguridad, e incrementan la seguridad también de los propios pacientes, permitiendo el seguimiento de los mismos, así como la desinfección de áreas expuestas al virus, entre otras potenciales aplicaciones. El trabajo futuro, mostrará el resultado de entrevistas con personal sanitario, los cuales han presentado requisitos para un potencial futuro sistema robótico asistencial en este ámbito., [Abstract] In this article we show the state-of-the-art robotic systems that are under development (some of which are already in use), to operate in infectious environments, for example, risk areas associated with COVID-19. The systems allow healthcare professionals to work more safely, and also increase the safety of the patients themselves, allowing patient monitoring, as well as disinfection of areas exposed to the virus, among other potential applications. Future work will show the results of interviews with healthcare personnel, who have presented requirements for a potential future robotic healthcare system in this field., Universitad Jaume I; UJI-B2018-34, Generalitat Valenciana; IDIFEDER/2018/013, Este trabajo ha sido realizado por el equipo del CIRTESU, ”Centro de Investigación en Robótica y Tecnologías Subacuáticas” de la Universidad Jaume I, y financiado por los proyectos DPI2017- 86372-C3 (TWINBOT), IDIFEDER/2018/013 (GV), UJI-B2018-34 (NEPTUNO), y el proyecto H2020-Peacetolero-NFRP-2019-2020-04., https://doi.org/10.17979/spudc.9788497498043
RUC. Repositorio da Universidade da Coruña
Publication Contribución de congreso (ConferenceOutput)

Hacia simulaciones realistas de agarre robótico submarino en el contexto del proyecto TWINBOT, Towards Realistic Simulations of Underwater Robotic Graspings in the Context of the TWINBOT Project

  • Ávila, Mario
  • Solís, Alejandro
  • Marín, Raúl
  • Sanz, Pedro J.
  • Martí, José Vicente
[Resumen] El uso de tecnologías de videojuegos en las aplicaciones robóticas está siendo de gran ayuda tanto en el diseño de interfaces de usuario como en la implementación de servidores de simulación, que permitan un mayor realismo en las imágenes generadas por computador. Así mismo, cuando se procura realizar una simulación donde existe contacto de un brazo manipulador, como por ejemplo en tareas de peg-in-hole, estas tecnologías no están todavía suficientemente avanzadas. En este artículo describimos el estado actual de uno de los experimentos de simulación del proyecto TWINBOT, donde se procura realizar tareas de manipulación con tuberías, incluyendo recuperación, transporte e inserción. El sistema utiliza la nueva versión de la física de Unity, a través del objeto Articulation Body, el cual da un mayor grado de precisión en el cálculo de fuerzas tras una interacción robótica con un objeto. El escenario de la simulación es submarino, pudiendo apreciar el nivel actual alcanzado con este tipo de sistemas., [Abstract] The use of video game technologies in robotic applications is being of great help both in the design of user interfaces and in the implementation of simulation servers, which allow greater realism in computergenerated images. Likewise, when trying to perform a simulation where there is contact of a manipulator arm, such as in pegin-hole tasks, these technologies are not yet sufficiently advanced. In this article we describe the current state of one of the simulation experiments of the TWINBOT project, which attempts to carry out handling tasks with pipes, including recovery, transport and insertion. The system uses the new version of Unity physics, through the Articulation Body object, which gives a greater degree of precision in the calculation of forces after a robotic interaction with an object. The simulation scenario is underwater, being able to appreciate the current level reached with this type of system., Universitat Jaume I; UJI-B2018-34, Generalitat de Valencia; IDIFEDER/2018/013, Este trabajo ha sido realizado por el equipo del CIRTESU, ”Centro de Investigación en Robótica y Tecnologías Subacuáticas” de la Universidad Jaume I, y financiado por los proyectos DPI2017-86372-C3 (TWINBOT), IDIFEDER/2018/013 (GV), UJI-B2018-34 (NEPTUNO), PID2020-115332RB-C31 (COOPERAMOS), y el proyecto H2020-Peacetolero-NFRP-2019-2020-04, https://doi.org/10.17979/spudc.9788497498043
RUC. Repositorio da Universidade da Coruña
Publication Contribución de congreso (ConferenceOutput)

Desarrollo de una interfaz para el prototipado y validación de un robot móvil autónomo de uso hospitalario, Development of an interface for the prototyping and testing of a antonomous mobile robot

  • Tirado-Bou, Amparo
  • Marín-Prades, Raúl
  • Baiguera Tambutti, Laura
  • Sanz, Pedro J.
  • Martí, José Vicente
[Resumen] El objetivo final del proyecto es la creación de un robot autónomo de soporte para el personal sanitario, en tareas relacionadas con la asistencia a pacientes infecciosos en aislamiento, como por ejemplo pacientes de COVID-19. La Metodología utilizada se basa en el Diseño de Prototipos, actualmente nos encontramos en la fase de diseño de la interfaz y desarrollo del prototipo experimental, que nos permite por una parte ir evaluando las características necesarias que ha de cumplir nuestra interfaz, así como evaluar a un bajo coste los componentes que formarán parte del producto final. En el presente artículo presentamos nuestro proceso de desarrollo., [Abstract] The final objective of the project is the creation of an autonomous support robot for health personnel, in tasks related to the care of infectious patients in isolation, such as COVID-19 patients. The Methodology used is based on the Design of Prototypes, we are currently in the design phase of the interface and development of the experimental prototype, which allows us, on the one hand, to evaluate the necessary characteristics that our interface must meet, as well as to evaluate a low cost the components that will form part of the final product. In this article we present our development process., Este trabajo ha sido realizado por el equipo del CIRTESU, ”Centro de Investigación en Robótica y Tecnologías Subacuáticas” de la Universidad Jaume I, grupo IRS-Lab (Interactive and Robotic systems Lab), y financiado por los proyectos PID2020-115332RB-C31 (COOPERAMOS), IDIFEDER/2018/013 (GV), UJI-B2021-30(AUDAZ), y el proyecto H2020-Peacetolero-NFRP-2019-2020-04.
RUC. Repositorio da Universidade da Coruña
Publication Contribución de congreso (ConferenceOutput)

State of the Art in Control Systems for Cooperative Distributed Mobile Robots in a Healthcare Environment

  • Baiguera Tambutti, Laura
  • Marín, Raúl
  • Tirado-Bou, Amparo
  • Sanz, Pedro J.
  • Martí, José Vicente
[Abstract] In this article we are presenting the state of the art in robotic control systems for healthcare environments. First, we identify the motivation and needs for healthcare robots in the state of the art, then we present an analysis of the challenges for their implementation, the existing solutions presented in literature and their limitations, and finally, our motivation and proposed future contribution in the field. The future work will involve the design of a robust robotic control system architecture for cooperative distributed systems of mobile manipulators used in hospital environments, as well as the validation of the control strategies in a simulated environment. The most promising solutions will be deployed on prototype mobile manipulators and validated in testing environments and, if possible, in real environments., Financed by PID2020-115332RBC31 (COOPERAMOS), IDIFEDER/2018/013 (GV), UJI-AUDAZ, and H2020-Peacetolero-NFRP-2019-2020-04 projects, https://doi.org/10.17979/spudc.9788497498418
RUC. Repositorio da Universidade da Coruña
Publication Contribución de congreso (ConferenceOutput)

POSEIDON Project: Objectives and Preliminary Results

  • Solís, Alejandro
  • Ávila, Mario
  • Sanz, Pedro J.
  • Marín, Raúl
  • Martí, José Vicente
  • Molina, Fernando
  • Pino, Andrea
  • De la Cruz, Marcos
  • Echagüe, Juan
[Abstract] This paper is presenting preliminary results dealing with the ongoing three-year project POSEIDON (imProving underwater cOoperative manipulation by meanS of lEarnIng, augmenteD reality and wIreless cOmmunicatioNs). In fact, this Project is a sub-project inside of a bigger one, COOPERAMOS (COOPErative Resident Robots for Autonomous ManipulatiOn Subsea). The aim and specific objectives of this project are presented, as well as some preliminary results on Simulation, HRI, and communications., [Resumen] Este documento presenta los resultados preliminares relacionados con el proyecto POSEIDON (mejora de la manipulación cooperativa subacuática mediante el aprendizaje, la realidad aumentada y las comunicaciones inalámbricas), que tiene una duración de tres años y está en curso. De hecho, este Proyecto es un subproyecto dentro de uno más grande, COOPERAMOS (COOPerativos Residentes de robots para la Manipulación Autónoma Submarina). Se presentan los objetivos de este proyecto, así como algunos resultados preliminares sobre Simulación, HRI y comunicaciones., Funded by PID2020-115332RBC31 (COOPERAMOS), IDIFEDER/2018/013 (GV), UJI-B2021-30 (AUDAZ) and EU H2020-Peacetolero-NFRP-2019-2020-04 projects., https://doi.org/10.17979/spudc.9788497498418