Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards Sustainability of Manufacturing Processes by Multiobjective Optimization: A Case Study on a Submerged Arc Welding Process

  • Rivas, Daniel
  • Quiza, Ramón
  • Rivas, Marcelino
  • Haber Guerra, Rodolfo E.
Optimization on the basis of sustainability brings important benefits to manufacturing process as sustainable productions constitute a crucial aspect in modern manufacturing. This paper presents a new formalized framework for optimizing the sustainability of manufacturing processes. Unlike previous approaches, the proposed technique combines a methodology for selecting the sustainability indicators and a multi-objective optimization for improving the three sustainability pillars (economy, environment and society). While selecting the significant sustainability indicators in the considered manufacturing process relies on the ABC judgment method, the Saaty's method enables weighting the chosen indicators in order to combine them into suitable economic, environmental and social sustainability indexes. Other technological aspects, usually taken as objectives in previous works, are considered constraints in the proposed approach. The optimization is performed by using nature inspired heuristics, which return the set of non-dominated solutions (also known as Pareto front), from which the most convenient alternative is chosen by the decision maker, depending on the specific conditions of the process. For illustrating the usage of the proposed framework, it is applied to the optimization of a submerged arc welding process. Compared with currently used welding parameters, the computed optimal solution outperforms the economic and environmental sustainability while keeps equal the social impact. The results show not only the effectiveness of the proposed approach, but also its flexibility by giving a set of possible solutions which can be chosen depending on how are ranked the sustainability pillars., This work was supported in part by the project Power2Power: Providing Next-Generation Silicon-Based Power Solutions in Transport and Machinery for Significant Decarbonisation in the Next Decade, funded by the Electronic Component Systems for European Leadership (ECSEL-JU) Joint Undertaking and MICINN under Grant 826417, in part by the European Commission through the Project H2020 Platform enable KITs of Artificial Intelligence for an Easy Uptake of SMEs (KITT4SME) under Grant 952119, and in part by the Cuban National Program on Basic Sciences through the Project Multi-Objectives Optimization Heuristics for Industrial Applications, under Grant P223LH001-068., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ensemble of convolutional neural networks based on an evolutionary algorithm applied to an industrial welding process

  • Cruz, Yarens J.
  • Rivas, Marcelino
  • Quiza, Ramón
  • Villalonga, Alberto
  • Haber Guerra, Rodolfo E.
  • Beruvides, Gerardo
This paper presents an approach for image classification based on an ensemble of convolutional neural networks and the application to a real case study of an industrial welding process. The ensemble consists of five convolutional neural networks, whose outputs are combined through a voting policy. In order to select appropriate network parameters (i.e., the number of convolutional layers and layers hyperparameters) and voting policy, an efficient search process was carried out by using an evolutionary algorithm. The proposed method is applied and validated in a case study focused on detecting misalignment of metal sheets to be joined through submerged arc welding process. After selecting the most convenient setup, the ensemble outperforms other seven strategies considered in a comparison in several metrics, while maintaining an adequate computational cost., This work was partially supported by the H2020 projects "Platform enable KITs of Artificial Intelligence for an Easy Uptake of SMEs (KITT4SME)" [grant number 952119]; and “Power2Power: Providing next-generation silicon-based power solutions in transport and machinery for significant decarbonisation in the next decade (Power2Power)” funded by ECSEL-JU and MICINN [grant agreement No. 826417]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Artificial Intelligence for Quality Control of manufacturing operations: Macro-mechanical milling in the Pilot Line GAMHE 5.0

  • Haber Guerra, Rodolfo E.
  • Castaño, Fernando
  • Armada, Manuel
  • Villalonga, Alberto
Quality is defined as the extent to which a product conforms to the design specifications and how it complies with the requirements of component functionality. For some industries, such as automotive and aeronautical, the quality of their parts is very important given the high requirements to which they are subject. However, difficulties arise from the fact that a measure of quality can only be evaluated ‘‘out-of-process”, resulting in losses because there is no alternative to removing defective parts from the production line. Therefore, it is necessary to apply Artificial Intelligence-based kits/solutions that provide in-process estimation to predict quality from some measured variables. The main goal of these datasets is to monitor the final quality of the manufactured components or parts by estimating surface roughness from vibration signals and cutting parameters information using Artificial Intelligence-based solutions. Surface roughness is an essential feature in quality control defined by the deviation in the direction of the normal vector of a real surface from its ideal form. Because the roughness measurement is an offline and post process procedure, being able to estimate this value online brings a series of benefits in terms of time and cost reduction in manufacturing lines, energy efficiency, unnecessary wear of tools and machines, etc. Once a part has been detected with a surface quality below what is desired, a series of corrective measures can be applied for the following operations, such as: reducing the feed rate percentage, increasing the percentage of spindle speed or reducing the axial depth per pass, etc., European Commission: KITT4SME - platform-enabled KITs of arTificial intelligence FOR an easy uptake by SMEs (952119)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Predictive modelling framework on the basis of artificial neural network: A case of nano-powder mixed electric discharge machining

  • Sana, Muhammad
  • Farooq, Muhammad Umar
  • Anwar, Saqib
  • Haber Guerra, Rodolfo E.
In this modern era where Industry 4.0, plays a crucial role in enhancing productivity, quality, and resource utilization by digitalizing and providing smart operation to industrial systems. Therefore, there is a need to establish a framework that enhances productivity and quality of work to achieve the net-zero from industry. In this study, a comprehensive and generic analytical framework has been established to mitigate or lessen the research and technological gap in the manufacturing sector. In addition to that, the key stages involved in artificial intelligence (AI) based modelling and optimization analysis for manufacturing systems have also been incorporated. To assess the proposed AI framework, electric discharge machining (EDM) as a case study has been selected. The focus enlightens the emergence of optimizing the material removal rate (MRR) and surface roughness (SR) for Inconel 617 (IN617) material. A full factorial design of the experiment was carried out for experimentation. After that, an artificial neural network (ANN) as a modelling framework is selected, and fine-tuning of hyperparameters during training has been carried out. To validate the predictive performance of the trained models, an external validation (Valext) test has been conducted. Through sensitivity analysis (SA) on the developed AI framework, the most influential factors affecting MRR and SR in EDM have been identified. Specifically, powder concentration (Cp) contributes the most to the percentage significance, accounting for 79.00 % towards MRR, followed by treatment (16.35 %) and 4.67 % surfactant concentration (Sc). However, the highest % significance in SR is given by Sc (36.86 %), followed by Cp (33.23 %), and then treatment (29.90 %), respectively. Furthermore, a parametric optimization has been performed using the framework and found that MRR and SR are 93.75 % and 58.90 % better than experimental data. This successful performance optimization proposed by the framework has the potential for application to other manufacturing systems., The authors appreciate the support from Researchers Supporting Project number (RSPD2023R702), King Saud University, Riyadh, Saudi Arabia. Authors wish also to thank projects H2020 KITT4SME GA 952119, and MICINN and NextGenerationEU/PRTR SELFRECO grant ID PID2021-127763OB-100., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Self-reconfiguration for smart manufacturing based on artificial intelligence: A review and case study

  • Cruz, Yarens J.
  • Castaño, Fernando
  • Haber Guerra, Rodolfo E.
  • Villalonga, Alberto
  • Ejsmont, Krzysztof
  • Gladysz, Bartlomiej
  • Flores, Álvaro
  • Alemany, Patricio
Editor: John Soldatos., Self-reconfiguration in manufacturing systems refers to the ability to autonomously execute changes in the production process to deal with variations in demand and production requirements while ensuring a high responsiveness level. Some advantages of these systems are their improved efficiency, flexibility, adaptability, and cost-effectiveness. Different approaches can be used for designing self-reconfigurable manufacturing systems, including computer simulation, data-driven methods, and artificial intelligence-based methods. To assess an artificial intelligence-based solution focused on self-reconfiguration of manufacturing enterprises, a pilot line was selected for implementing an automated machine learning method for finding and setting optimal parametrizations and a fuzzy system-inspired reconfigurator for improving the performance of the pilot line. Additionally, a deep learning segmentation model was integrated into the pilot line as part of a visual inspection module, enabling a more efficient management of the production line workflow. The results obtained demonstrate the potential of self-reconfigurable manufacturing systems to improve the efficiency and effectiveness of production processes., This work was partially supported by the H2020 project “platform-enabled KITs of arTificial intelligence FOR an easy uptake by SMEs (KITT4SME),” grant ID 952119. The work is also funded by the project “Self-reconfiguration for Industrial Cyber-Physical Systems based on digital twins and Artificial Intelligence. Methods and application in Industry 4.0 pilot line,” Spain, grant ID PID2021-127763OB-100, and supported by MICINN and NextGenerationEU/PRTR. This result is also part of the TED2021-131921A-I00 project, funded by MCIN/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU/PRTR.”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interoperable software platforms for introducing artificial intelligence components in manufacturing: A meta-framework for security and privacy

  • Alonso, Rubén
  • Haber Guerra, Rodolfo E.
  • Castaño, Fernando
  • Reforgiato Recupero, Diego
This work is based on defining, applying, and evaluating a framework for security and privacy analysis of software platforms for AI in the industry. New datasets were not generated. The used datasets were analyzed at a high level without the need to go deep into the details of the individual data. The specific content of these datasets is not necessary to replicate the content of the article., The irruption of advanced technologies and the limited knowledge of software architectures are making it difficult for many small and medium-sized manufacturing companies to keep up with what is being called the fourth industrial revolution (Industry 4.0, Industry of the Future). Container orchestration platforms provide layers of simplification for key requirements such as interoperability, security, and privacy, and provide mechanisms that allow companies and technology providers to focus on their specific functionalities and goals, instead of investing considerable time and effort in the underlying platform on which the solution will operate. This article focuses on these platforms and the issues when developing them, and proposes a risk- and goal-oriented hybrid meta-framework for security and privacy analysis. The meta-framework uses well-known security and privacy standards and frameworks as a reference and can be used to understand assets and requirements and, in particular, to select and configure countermeasures. For practical evaluation of the meta-framework, it was applied to a real case. This case shows how the needs of the KITT4SME project platform were analyzed to support, among others, four manufacturing pilot cases and to define the key security and privacy features that should be introduced when implementing a software platform for easy uptake by small and medium enterprises., This work was supported by the H2020 project “Platform enable KITs of Artificial Intelligence for an Easy Uptake of SMEs (KITT4SME)”, GA 952119 and by the project “Self-reconfiguration for Industrial Cyber-Physical Systems based on Digital Twins and Artificial Intelligence. Methods and application in Industry 4.0 pilot line”, Spain, grant ID PID2021-127763OB-100 supported by MICINN and NextGenerationEU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Extending Asset Lifespan Through Data Augmentation-Assisted Quality Control

  • Alonso, Rubén
  • Noce, Guido
  • Cutrona, Vincenzo
  • Recupero, Diego Reforgiato
Virtual constraints are relations imposed on a control system which insure invariance via feedback control, as opposed to physical constraints acting on the system. In this work, we introduce the notion of virtual constraints on Riemannian homogeneous spaces in a geometric framework which is a generalization of the classical controlled invariant distribution setting and we show the existence and uniqueness of a control law preserving the invariant distribution., This work was supported by the European Project H2020 “platform-enabled KITs of arTificial intelligence FOR an easy uptake by SMEs (KITT4SME)” under Grant Agreement 952119., Peer reviewed
Archivo Digital UPM
Publication Tesis doctoral (DoctoralThesis)

Reconfiguración y supervisión automática de sistemas ciberfísicos basada en gemelos digitales e Inteligencia Artificial. Aplicación a una línea piloto de Industria 4.0