Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Correlation between structure and mechanical properties in α-quartz single crystal by nanoindentation, AFM and confocal Raman microscopy

  • Enríquez Pérez, Esther
  • Campo, Ángel Adolfo del
  • Jiménez Reinosa, Julián
  • Konstantopoulos, G.
  • Charitidis, C.
  • Fernández Lozano, José Francisco
[EN] Quartz constitutes a very useful material due to its variety of applications, highlighting solid-state physics for material science with applications for devices and sensors, as piezoelectric for microbalances or oscillators for watches, computers, etc. These applications are very sensible to local pressures and stresses, however, there is not much information in the literature about the effect of high local pressures on the structure and their correlation with mechanical properties. In order to provide more information and clarity on this type of stress-structure-mechanical properties correlation, in this work, nanoindentation combined with Raman Confocal microscopy was carried out since it offers a powerful method to obtain information about the structural deformation and mechanical properties produced by high local pressures in α-quartz single crystal. The information obtained by nanoindentation (pile-up, pop-out, hardness and Υoung modulus) has been correlated with the structural data extracted from Raman spectroscopy, concluding that a permanent plastic deformation occurs under the indentation footprint, sharply appearing a new denser phase, which contribution increases with the applied load., This research was funded by the EU H2020 Project “Harmonisation of EU-wide nanomechanics protocols and relevant data exchange procedures, across representative cases; standardisation, interoperability, data workflow” (NanoMECommons) under Grant Agreement No. 952869., Supplementary data to this article can be found online at https://doi.org/10.1016/j.jmrt.2023.08.041, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Materials characterisation and software tools as key enablers in Industry 5.0 and wider acceptance of new methods and products

  • Konstantopoulos, G.
  • Charitidis, C.A.
  • Bañares, Miguel A.
  • Portela, Raquel
  • Zangenberg, N.
  • Capria, E.
  • Sebastiani, M.
  • Goldbeck, G.
  • Koumoulos, E.
  • Boskovic, B.
  • Diplas, S.
  • Konchakova, N.
  • Todorov, I.
  • Dykeman, D.
  • Avataneo, S.G.
  • Falzetti, M.
  • Diz, E.L.
  • Reinosa, Julián J.
  • Burov, E.
  • Škrelić, D.
  • Jeliazkova, N.
  • Barton, Bastian
  • Masotti, G.
  • Tamarozzi, T.
  • Alcón, I.M.
Recently, the NMBP-35 Horizon 2020 projects - NanoMECommons, CHARISMA, and Easi-stress - organised a collaborative workshop to increase awareness of their contributions to the industry “commons” in terms of characterisation and digital transformation. They have established interoperability standards for knowledge management in characterisation and introduced new solutions for materials testing, aided by the standardisation of faster and more accurate assessment methods. The lessons learned from these projects and the discussions during the joint workshop emphasised the impact of recent developments and emerging needs in the field of characterisation. Specifically, the focus was on enhancing data quality through harmonisation and standardisation, as well as making advanced technologies and instruments accessible to a broader community with the goal of fostering increased trust in new products and a more skilled society. Experts also highlighted how characterisation and the corresponding experimental data can drive future innovation agendas towards technological breakthroughs. The focus of the discussion revolved around the characterisation and standardisation processes, along with the collection of modelling and characterisation tools, as well as protocols for data exchange. The broader context of materials characterisation and modelling within the materials community was explored, drawing insights from the Materials 2030 Roadmap and the experiences gained from NMBP-35 projects. This whitepaper has the objective of addressing common challenges encountered by the materials community, illuminating emerging trends and evolving techniques, and presenting the industry's perspective on emerging requirements and past success stories. It accomplishes this by providing specific examples and highlighting how these experiences can create fresh opportunities and strategies for newcomers entering the market. These advancements are anticipated to facilitate a more efficient transition from Industry 4.0 to 5.0 during the industrial revolution. © 2023, The Workshop was supported by EU H2020 project NanoMECommons, GA 952869, CHARISMA, GA 952921, EASI-STRESS, GA 953219, and EsSENce COST ACTION CA19118. This article/publication is based upon work from COST Action EsSENce COST ACTION CA19118, supported by COST (European Cooperation in Science and Technology). Miguel A. Bañares, Raquel Portela, Nina Jeliazkova, Enrique Lozano, Bastian Barton and Iván Moya have received financial support from the EU H2020 project CHARISMA, GA n. 952921, Bojan Boskovic, Ennio Capria, Costas Charitidis, Donna Dykeman, Spyros Diplas, Gerhard Goldbeck, Marco Sebastiani, Elias Koumoulos, Silvia Giovanna Avataneo, Miguel A. Bañares, Raquel Portela, Anastasia Alexandratou, Athanasios Katsavrias, Fotis Mystakopoulos have received financial support from the EU H2020 project NanoMECommons, GA n. 952869, Nikolaj Zangernberg and Ennio Capria have received financial support from the EU H2020 project EASI-STRESS, GA n. 953219, Natalia Konchakova has received financial support from the EU H2020 project VIPCOAT, GA n. 952903, Costas Charitidis, Elias Koumoulos, and Spyros Diplas have received financial support from the EsSENce COST ACTION CA19118. All authors would like to specially acknowledge Anastasia Alexandratou, Athanasios Katsavrias and Fotis Mystakopoulos for their support in NMBP-35 joint Workshop organisation and documentation, and Steffen Neumann for his insights during the NMBP-35 joint Workshop discussions., Peer reviewed