Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Considerations in the Search for Epistasis

  • Balvert, Marleen
  • Cooper-Knock, Johnathan
  • Stamp, Julian
  • Byrne, Ross P.
  • Mourragui, Soufiane
  • van Gils, Juami
  • Benonisdottir, Stefania
  • Schlüter, Johannes
  • Kenna, Kevin
  • González-Domínguez, Jorge
The code for the simulated data is available at Github and Zenodo under an MIT license. - Balvert M, Cooper-Knock J, Stamp J, Byrne RP, Mourragui S, van Gils J et al. Population structure confounds regression-based epistasis detection. 2024. Github https://github.com/jdstamp/leiden_paper. - Balvert M, Cooper-Knock J, Stamp J, Byrne RP, Mourragui S, van Gils J, et al. Population structure confounds regression-based epistasis detection. 2024. Zenodo. https://doi.org/10.5281/zenodo.13940750. A Correction to this paper has been published: https://doi.org/10.1186/s13059-025-03477-x (20 January 2025), [Abstract]: Epistasis refers to changes in the effect on phenotype of a unit of genetic information, such as a single nucleotide polymorphism or a gene, dependent on the context of other genetic units. Such interactions are both biologically plausible and good candidates to explain observations which are not fully explained by an additive heritability model. However, the search for epistasis has so far largely failed to recover this missing heritability. We identify key challenges and propose that future works need to leverage idealized systems, known biology and even previously identified epistatic interactions, in order to guide the search for new interactions., We also thank the Artificial Intelligence Journal, the Company of Biologists, the Netherlands Organization for Scientific Research (Veni grant VI.Veni.192.043), Bielefeld University, Ronin, and funding from the European Union’s Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreements No 956229 (ALPACA) and No 872539 (PANGAIA) for providing funding for the workshop. R.P.B. is supported by funding from the Motor Neurone Disease Association (Byrne/Oct22/979–799). J.C.K. was supported by the Wellcome Trust (216596/Z/19/Z). C.H./J.C.K. are supported by the MNDA (899–792). M.B. is supported by the Netherlands Organization for Scientific Research (Veni grant VI.Veni.192.043). M.P.S. is supported by the National Institutes of Health (CEGS 5P50HG00773504, 1P50HL083800, 1R01HL101388, 1R01-HL122939, S10OD025212, P30DK116074, and UM1HG009442)., Netherlands. Nederlandse Organisatie voor Wetenschappelijk Onderzoek; VI.Veni.192.043, United Kingdom. Motor Neurone Disease Association; Byrne/Oct22/979–799, United Kingdom. Motor Neurone Disease Association; 899–792, Wellcome Trust; 216596/Z/19/Z, United States. National Institutes of Health; 5P50HG00773504, United States. National Institutes of Health; 1P50HL083800, United States. National Institutes of Health; 1R01HL101388, United States. National Institutes of Health; 1R01-HL122939, United States. National Institutes of Health; S10OD025212, United States. National Institutes of Health; P30DK116074, United States. National Institutes of Health; UM1HG009442, https://doi.org/10.1186/s13059-025-03477-x
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Test data set for comparative evaluation of transposable element curation in eukaryotic species

  • Orozco-Arias, Simón
  • Sierra, Pío
  • Durbin, Richard
  • González Pérez, Josefa
[Description of methods used for collection/generation of data] We generated raw TE libraries, or used the ones already available, for the six species analyzed, with three de novo tools, namely RepeatModeler2 (RM2; Flynn et al., 2020), EDTA (Ou et al., 2019) and TEdenovo from REPET (Flutre et al., 2011). To generate the libraries the following assemblies were used: GCA_002050065.1 for D. melanogaster, GCF_000738735.6 for C. cornix, and GCA_000002035.4 for D. rerio, the RGAP assembly version 7 for O. sativa (available at https://phytozome-next.jgi.doe.gov/info/Osativa_v7_0; Ouyang et al., 2007), and the T2T assemblies GCA_022117705.1 for Z. mays, and GCF_009914755 for H. sapiens. For the for C. cornix, Z. mays and H. sapiens RM2 raw libraries, we generated them using the TEtools Docker image available at https://github.com/Dfam-consortium/TETools. For for D. melanogaster, O. sativa and D. rerio we used the raw libraries available at: https://github.com/jmf422/TE_annotation/tree/master/benchmark_libraries/RM2. For EDTA libraries, we generated them for the six species using the EDTA pipeline v.2.0 with --anno 0 and the other parameters by default. Regarding the REPET libraries, for the D. melanogaster genome, we ran the TEdenovo pipeline using default parameters and followed the recommended steps in the user's guideline (https://urgi.versailles.inra.fr/Tools/REPET/TEdenovo-tuto). For the D. rerio genome, we created a subset of 300 Mb using the PreProcess.py script available with the REPET package and then we ran TEdenovo pipeline using default parameters as for the D. melanogaster genome (Jamilloux et al., 2016). The REPET group kindly provided us with the output generated with the O. sativa genome available in the RepetDB database (Amselem et al., 2019). They also provide us with the libraries for C. cornix and Z. mays. As the reference libraries, we used the Berkeley Drosophila Genome Project (BDGP) dataset (Kaminker et al., 2002) and the Manual Curated TE library (MCTE) provided in Rech, et al., (2022) for D. melanogaster, the library published by Ou et al. (2019) for O. sativa (referred to as "standard library" by the authors), the MClibrary available at Weissensteiner et al., (2020) for C. cornix, the manual curated TE models available in Dfam release 3.7 (J. Storer et al., 2021) and in Repbase version 20181026 for D. rerio, MTEC curated by Ou et al (https://github.com/oushujun/MTEC) for Z. mays, and curated TE models in Dfam 3.7 for H. sapiens. For the rice "standard library”, Dfam and Repbase libraries, we unified the LTR sequences with their corresponding internal part before performing further analysis, using in-house scripts. MCHelper v.1.7.0 was executed with default parameters (to see customizable parameters see Github: https://github.com/GonzalezLab/MCHelper). In the False positive filtering step, MCHelper requires a gene set to detect homology between the consensus sequences and multicopy gene families. We used the following BUSCO gene sets: for D. melanogaster, we used the diptera set (diptera_odb10), for O. sativa and Z. mays, the viriplantae set (viriplantae_odb10), for C. cornix, the aves set (aves_odb10), for D. rerio, the actinopterygii set (actinopterygii_odb10), and for H. sapiens, the mammalian set (mammalia_odb10). To accommodate MCHelper's expectation of a single file with all the hidden Markov models (HMMs), we concatenated all the available HMM files into a single file for each species. For the annotation we ran RepeatMasker v.4.1.2-p1 (Smit et al., 2015) on each of the three genomes with the raw, reference and MCHelper libraries using the -lib parameter, and the following additional parameters: -gff -nolow -no_is -norna. We then used the OneCodeToFindThemAll script (Bailly-Bechet et al., 2014) in each genome annotation to defragment the copies, and we used the “--strict” parameter for D. melanogaster, D. rerio, and C. cornix. [File List] this dataset is composed of six folders, each one corresponding to a species. The species are: D. melanogaster (fruit fly), O. sativa (rice), C. cornix (crow), D. rerio (zebrafish), Z. mays (corn) and H. sapiens (human). The folder for each species contains the assembly used, the BUSCO gene dataset (except for Z. mays because the BUSCO dataset is the same as for O. sativa), a folder for each the de novo program used to generate the TE library (RM2 (RepeatModeler2), EDTA and REPET), plus a folder with the files for the reference library. Each de novo program folder contains the raw library (produced by that program), a CSV containing the length by order of the TE consensus sequences, the output data of the MCHelper execution (in the folder curation_ite16), as well as the annotation (in the folder RM_annot). The REPET folder has an extra file describing the classification and structural features (ending in denovoLubTEs_PC.classif). Note that REPET was not run for the H. sapiens genome., This work was supported by grant PID2020-115874GB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by grant 2021 SGR 00417 funded by Departament de Recerca i Universitats, Generalitat de Catalunya awarded to J.G. P.S. is funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 956229. R.D. acknowledges funding from Wellcome grant 207492., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

MCHelper automatically curates transposable element libraries across species

  • Orozco-Arias, Simón
  • Sierra, Pío
  • Durbin, Richard
  • González Pérez, Josefa
The number of species with high quality genome sequences continues to increase, in part due to scaling up of multiple large scale biodiversity sequencing projects. While the need to annotate genic sequences in these genomes is widely acknowledged, the parallel need to annotate transposable element sequences that have been shown to alter genome architecture, rewire gene regulatory networks, and contribute to the evolution of host traits is becoming ever more evident. However, accurate genome-wide annotation of transposable element sequences is still technically challenging. Several de novo transposable element identification tools are now available, but manual curation of the libraries produced by these tools is needed to generate high quality genome annotations. Manual curation is time-consuming, and thus impractical for large-scale genomic studies, and lacks reproducibility. In this work, we present the Manual Curator Helper tool MCHelper, which automates the TE library curation process. By leveraging MCHelper’s fully automated mode with the outputs from two de novo transposable element identification tools, RepeatModeler2 and REPET, in fruit fly, rice, and zebrafish, we show a substantial improvement in the quality of the transposable element libraries and genome annotations. MCHelper libraries are less redundant, with up to 54% reduction in the number of consensus sequences, have up to 11.4% fewer false positive sequences, and also have up to ∼45% fewer “unclassified/unknown” transposable element consensus sequences. Genome-wide transposable element annotations were also improved, including larger unfragmented insertions. MCHelper is a fast, easy to install, and easy to use tool and is available at https://github.com/GonzalezLab/MCHelper., [Significant statement] The number and quality of genome sequences available is rapidly increasing across the tree of life. Transposable elements, DNA fragments with the ability to move within the genome often generating copies of themselves in the process, constitute significant proportions of the total genome content across species. Although transposable elements are a major source of genome variation, they are often ignored as it is still challenging to accurately annotate them. We have developed MCHelper, an automatic tool to curate transposable element libraries that allows for high quality, fast, and replicable transposable elements annotations., This project is funded by by MCIN/AEI/ 10.13039/501100011033 (grant number PID2020-115874GB-I00) awarded to J.G. P.S. is funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 956229. R.D. acknowledges funding from Wellcome grant 207492., No