Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Nano3P-seq: transcriptome-wide analysis of gene expression and tail dynamics using end-capture nanopore cDNA sequencing

  • Begik, Oguzhan
  • Diensthuber, Gregor
  • Liu, Huanle
  • Delgado-Tejedor, Anna
  • Kontur, Cassandra
  • Niazi, Adnan Muhammad
  • Valen, Eivind
  • Giraldez, Antonio J.
  • Beaudoin, Jean-Denis
  • Mattick, John S.
  • Novoa, Eva Maria
RNA polyadenylation plays a central role in RNA maturation, fate, and stability. In response to developmental cues, polyA tail lengths can vary, affecting the translation efficiency and stability of mRNAs. Here we develop Nanopore 3' end-capture sequencing (Nano3P-seq), a method that relies on nanopore cDNA sequencing to simultaneously quantify RNA abundance, tail composition, and tail length dynamics at per-read resolution. By employing a template-switching-based sequencing protocol, Nano3P-seq can sequence RNA molecule from its 3' end, regardless of its polyadenylation status, without the need for PCR amplification or ligation of RNA adapters. We demonstrate that Nano3P-seq provides quantitative estimates of RNA abundance and tail lengths, and captures a wide diversity of RNA biotypes. We find that, in addition to mRNA and long non-coding RNA, polyA tails can be identified in 16S mitochondrial ribosomal RNA in both mouse and zebrafish models. Moreover, we show that mRNA tail lengths are dynamically regulated during vertebrate embryogenesis at an isoform-specific level, correlating with mRNA decay. Finally, we demonstrate the ability of Nano3P-seq in capturing non-A bases within polyA tails of various lengths, and reveal their distribution during vertebrate embryogenesis. Overall, Nano3P-seq is a simple and robust method for accurately estimating transcript levels, tail lengths, and tail composition heterogeneity in individual reads, with minimal library preparation biases, both in the coding and non-coding transcriptome., We thank all the members of the Novoa lab for their valuable insights and discussion. O.B. is supported by a UNSW International PhD fellowship and Australian Government Research Training Program Scholarship. G.D. is part of the ROPES ITN, which received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement number 956810. A.D.-T. is supported by an FPI-SO fellowship (PRE2019-088498). This work was supported by the Australian Research Council (DP180103571 to E.M.N.), the Spanish Ministry of Economy, Industry and Competitiveness (MEIC) (PGC2018-098152-A-100 to E.M.N.), the European Research Council (ERC-StG-2021 No 101042103 to E.M.N.) and the NIH (R35GM122580 and RO1HD00035 to A.J.G). We acknowledge the support of the MEIC to the EMBL partnership, Centro de Excelencia Severo Ochoa and CERCA Programme/Generalitat de Catalunya. We thank T. Mercer (Garvan Institute, Australia) for providing us with the sequins used as spike-ins in Nano3P-seq zebrafish runs. We thank the Sdelci lab (CRG, Spain) for providing us with HeLa cell lines pellets used in this work.
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Enhanced detection of RNA modifications and read mapping with high-accuracy nanopore RNA basecalling models

  • Diensthuber, Gregor
  • Pryszcz, Leszek Piotr, 1985-
  • Llovera Nadal, Laia
  • Lucas, Morghan C.
  • Delgado-Tejedor, Anna
  • Cruciani, Sonia
  • Roignant, Jean-Yves
  • Begik, Oguzhan
  • Novoa, Eva Maria
In recent years, nanopore direct RNA sequencing (DRS) became a valuable tool for studying the epitranscriptome, due to its ability to detect multiple modifications within the same full-length native RNA molecules. While RNA modifications can be identified in the form of systematic basecalling 'errors' in DRS datasets, N6-methyladenosine (m6A) modifications produce relatively low 'errors' compared to other RNA modifications, limiting the applicability of this approach to m6A sites that are modified at high stoichiometries. Here, we demonstrate that the use of alternative RNA basecalling models, trained with fully unmodified sequences, increases the 'error'signal of m6A, leading to enhanced detection and improved sensitivity even at low stoichiometries. Moreover, we find that high-accuracy alternative RNA basecalling models can show up to 97% median basecalling accuracy, outperforming currently available RNA basecalling models, which show 91% median basecalling accuracy. Notably, the use of high-accuracy basecalling models is accompanied by a significant increase in the number of mapped reads -especially in shorter RNA fractions- and increased basecalling error signatures at pseudouridine (Ψ) and N1-methylpseudouridine (m1Ψ) modified sites. Overall, our work demonstrates that alternative RNA basecalling models can be used to improve the detection of RNA modifications, read mappability, and basecalling accuracy in nanopore DRS datasets., GD is part of the ROPES ITN which received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 956810. OB is supported by funds from Merck Innovation 2020. LPP was supported by funding from the European Union’s H2020 research and innovation programme under Marie Sklodowska-Curie grant agreement No. 754422, and is currently supported by ERC funds (ERC-StG-2021 No 101042103 to EMN). JYR is supported by funds from the Swiss National Science Foundation (310030_197906) and the Deutsche Forschungsgemeinschaft (RO 4681/4-2, RO 4681/6-1, and RO 4681/12-1, TRR319 RMaP). This work was supported by funds from the Spanish Ministry of Economy, Industry and Competitiveness (MEIC) (PID2021-128193NB-100 to EMN) and the European Research Council (ERC-StG-2021 No 101042103 to EMN). We acknowledge the support of the MEIC to the EMBL partnership, Centro de Excelencia Severo Ochoa and CERCA Programme / Generalitat de Catalunya.
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Rapid and accurate demultiplexing of direct RNA nanopore sequencing data with SeqTagger

  • Pryszcz, Leszek Piotr, 1985-
  • Diensthuber, Gregor
  • Llovera Nadal, Laia
  • Medina, Rebeca
  • Delgado-Tejedor, Anna
  • Cozzuto, Luca
  • Ponomarenko, Julia
  • Novoa, Eva Maria
Nanopore direct RNA sequencing (DRS) enables direct measurement of RNA molecules, including their native RNA modifications, without prior conversion to cDNA. However, commercial methods for molecular barcoding of multiple DRS samples are lacking, and community-driven efforts, such as DeePlexiCon, are not compatible with newer RNA chemistry flowcells and the latest generation of graphics processing units (GPUs). To overcome these limitations, we introduce SeqTagger, a rapid and robust method that can demultiplex DRS data sets with 99% precision and 95% recall. We demonstrate the applicability of SeqTagger in both RNA002/R9.4 and RNA004/RNA chemistries and show its robust performance both for long and short RNA libraries, including custom libraries that do not contain standard poly(A) tails, such as Nano-tRNAseq libraries. Finally, we demonstrate that increasing the multiplexing up to 96 barcodes yields highly accurate demultiplexing models. SeqTagger can be executed in a standalone manner or through the MasterOfPores NextFlow workflow. The availability of an efficient and simple multiplexing strategy improves the cost-effectiveness of this technology and facilitates the analysis of low-input biological samples., This project has received funding from the European Union's Horizon 2020 Research and Innovation programme under the Marie Sklodowska-Curie grant agreement no. 754422 (L.P.P.) and 956810 (G.D.). A.D.-T. is supported by an FPI fellowship from the Spanish Ministry of Science and Innovation (MCIU PE 2017-2020 FPI FSE). We acknowledge the support of the Spanish Ministry of Science and Innovation through the Centro de Excelencia Severo Ochoa (CEX2020-001049-S, MCIN/AEI/10.13039/501100011033), the Generalitat de Catalunya through the CERCA programme and to the EMBL partnership. This work was supported by project PID2021-128193NB-100 funded by MCIN/AEI/10.13039/501100011033/FEDER, UE, and it has received funding from the European Union's Horizon Europe (ERC Starting Grant) under the grant agreement no. 101042103 (E.M.N.). This work was funded by the European Union. Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authority can be held responsible for them.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Nano3P-seq: transcriptome-wide analysis of gene expression and tail dynamics using end-capture nanopore cDNA sequencing

  • Begik, Oguzhan
  • Diensthuber, Gregor
  • Liu, Huanle
  • Delgado-Tejedor, Anna
  • Kontur, Cassandra
  • Niazi, Adnan Muhammad
  • Valen, Eivind
  • Giraldez, Antonio J.
  • Beaudoin, Jean-Denis
  • Mattick, John S.
  • Novoa, Eva Maria
RNA polyadenylation plays a central role in RNA maturation, fate, and stability. In response to developmental cues, polyA tail lengths can vary, affecting the translation efficiency and stability of mRNAs. Here we develop Nanopore 3' end-capture sequencing (Nano3P-seq), a method that relies on nanopore cDNA sequencing to simultaneously quantify RNA abundance, tail composition, and tail length dynamics at per-read resolution. By employing a template-switching-based sequencing protocol, Nano3P-seq can sequence RNA molecule from its 3' end, regardless of its polyadenylation status, without the need for PCR amplification or ligation of RNA adapters. We demonstrate that Nano3P-seq provides quantitative estimates of RNA abundance and tail lengths, and captures a wide diversity of RNA biotypes. We find that, in addition to mRNA and long non-coding RNA, polyA tails can be identified in 16S mitochondrial ribosomal RNA in both mouse and zebrafish models. Moreover, we show that mRNA tail lengths are dynamically regulated during vertebrate embryogenesis at an isoform-specific level, correlating with mRNA decay. Finally, we demonstrate the ability of Nano3P-seq in capturing non-A bases within polyA tails of various lengths, and reveal their distribution during vertebrate embryogenesis. Overall, Nano3P-seq is a simple and robust method for accurately estimating transcript levels, tail lengths, and tail composition heterogeneity in individual reads, with minimal library preparation biases, both in the coding and non-coding transcriptome., We thank all the members of the Novoa lab for their valuable insights and discussion. O.B. is supported by a UNSW International PhD fellowship and Australian Government Research Training Program Scholarship. G.D. is part of the ROPES ITN, which received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement number 956810. A.D.-T. is supported by an FPI-SO fellowship (PRE2019-088498). This work was supported by the Australian Research Council (DP180103571 to E.M.N.), the Spanish Ministry of Economy, Industry and Competitiveness (MEIC) (PGC2018-098152-A-100 to E.M.N.), the European Research Council (ERC-StG-2021 No 101042103 to E.M.N.) and the NIH (R35GM122580 and RO1HD00035 to A.J.G). We acknowledge the support of the MEIC to the EMBL partnership, Centro de Excelencia Severo Ochoa and CERCA Programme/Generalitat de Catalunya. We thank T. Mercer (Garvan Institute, Australia) for providing us with the sequins used as spike-ins in Nano3P-seq zebrafish runs. We thank the Sdelci lab (CRG, Spain) for providing us with HeLa cell lines pellets used in this work.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Enhanced detection of RNA modifications and read mapping with high-accuracy nanopore RNA basecalling models

  • Diensthuber, Gregor
  • Pryszcz, Leszek Piotr, 1985-
  • Llovera Nadal, Laia
  • Lucas, Morghan C.
  • Delgado-Tejedor, Anna
  • Cruciani, Sonia
  • Roignant, Jean-Yves
  • Begik, Oguzhan
  • Novoa, Eva Maria
In recent years, nanopore direct RNA sequencing (DRS) became a valuable tool for studying the epitranscriptome, due to its ability to detect multiple modifications within the same full-length native RNA molecules. While RNA modifications can be identified in the form of systematic basecalling 'errors' in DRS datasets, N6-methyladenosine (m6A) modifications produce relatively low 'errors' compared to other RNA modifications, limiting the applicability of this approach to m6A sites that are modified at high stoichiometries. Here, we demonstrate that the use of alternative RNA basecalling models, trained with fully unmodified sequences, increases the 'error'signal of m6A, leading to enhanced detection and improved sensitivity even at low stoichiometries. Moreover, we find that high-accuracy alternative RNA basecalling models can show up to 97% median basecalling accuracy, outperforming currently available RNA basecalling models, which show 91% median basecalling accuracy. Notably, the use of high-accuracy basecalling models is accompanied by a significant increase in the number of mapped reads -especially in shorter RNA fractions- and increased basecalling error signatures at pseudouridine (Ψ) and N1-methylpseudouridine (m1Ψ) modified sites. Overall, our work demonstrates that alternative RNA basecalling models can be used to improve the detection of RNA modifications, read mappability, and basecalling accuracy in nanopore DRS datasets., GD is part of the ROPES ITN which received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 956810. OB is supported by funds from Merck Innovation 2020. LPP was supported by funding from the European Union’s H2020 research and innovation programme under Marie Sklodowska-Curie grant agreement No. 754422, and is currently supported by ERC funds (ERC-StG-2021 No 101042103 to EMN). JYR is supported by funds from the Swiss National Science Foundation (310030_197906) and the Deutsche Forschungsgemeinschaft (RO 4681/4-2, RO 4681/6-1, and RO 4681/12-1, TRR319 RMaP). This work was supported by funds from the Spanish Ministry of Economy, Industry and Competitiveness (MEIC) (PID2021-128193NB-100 to EMN) and the European Research Council (ERC-StG-2021 No 101042103 to EMN). We acknowledge the support of the MEIC to the EMBL partnership, Centro de Excelencia Severo Ochoa and CERCA Programme / Generalitat de Catalunya.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Rapid and accurate demultiplexing of direct RNA nanopore sequencing data with SeqTagger

  • Pryszcz, Leszek Piotr, 1985-
  • Diensthuber, Gregor
  • Llovera Nadal, Laia
  • Medina, Rebeca
  • Delgado-Tejedor, Anna
  • Cozzuto, Luca
  • Ponomarenko, Julia
  • Novoa, Eva Maria
Nanopore direct RNA sequencing (DRS) enables direct measurement of RNA molecules, including their native RNA modifications, without prior conversion to cDNA. However, commercial methods for molecular barcoding of multiple DRS samples are lacking, and community-driven efforts, such as DeePlexiCon, are not compatible with newer RNA chemistry flowcells and the latest generation of graphics processing units (GPUs). To overcome these limitations, we introduce SeqTagger, a rapid and robust method that can demultiplex DRS data sets with 99% precision and 95% recall. We demonstrate the applicability of SeqTagger in both RNA002/R9.4 and RNA004/RNA chemistries and show its robust performance both for long and short RNA libraries, including custom libraries that do not contain standard poly(A) tails, such as Nano-tRNAseq libraries. Finally, we demonstrate that increasing the multiplexing up to 96 barcodes yields highly accurate demultiplexing models. SeqTagger can be executed in a standalone manner or through the MasterOfPores NextFlow workflow. The availability of an efficient and simple multiplexing strategy improves the cost-effectiveness of this technology and facilitates the analysis of low-input biological samples., This project has received funding from the European Union's Horizon 2020 Research and Innovation programme under the Marie Sklodowska-Curie grant agreement no. 754422 (L.P.P.) and 956810 (G.D.). A.D.-T. is supported by an FPI fellowship from the Spanish Ministry of Science and Innovation (MCIU PE 2017-2020 FPI FSE). We acknowledge the support of the Spanish Ministry of Science and Innovation through the Centro de Excelencia Severo Ochoa (CEX2020-001049-S, MCIN/AEI/10.13039/501100011033), the Generalitat de Catalunya through the CERCA programme and to the EMBL partnership. This work was supported by project PID2021-128193NB-100 funded by MCIN/AEI/10.13039/501100011033/FEDER, UE, and it has received funding from the European Union's Horizon Europe (ERC Starting Grant) under the grant agreement no. 101042103 (E.M.N.). This work was funded by the European Union. Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authority can be held responsible for them.