Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Improved Mn4+/Mn2+ Contribution in High-Voltage Zn-MnO2 Batteries Enabled by an Al3+-Ion Electrolyte

  • Chang, Xingqi|||0000-0002-2604-0233
  • Chacón Borrero, Jesús|||0000-0001-9792-6720
  • Shang, Jian
  • Xiao, Ke
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Mejia-Centeno, Karol V.|||0000-0002-6353-4769
  • Lu, Xuan|||0000-0003-2453-2805
  • Yu, Ao
  • Yu, Jing|||0000-0002-7620-745X
  • Zhou, Xiaolong|||0000-0002-3763-4133
  • Tunmee, Sarayut
  • Kidkhunthod, Pinit
  • Cui, Changcai|||0000-0002-8023-7934
  • Li, Junshan|||0000-0002-1482-1972
  • Tang, Yongbing|||0000-0003-2705-4618
  • Martínez-Alanis, Paulina R.|||0000-0003-3675-4472
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Rechargeable aqueous Zn-MnO2 batteries are attracting attention as a cost-effective and safe energy storage solution, but their commercialization faces challenges due to limited stability, output voltage, and energy density. Herein, a hybrid-ion Zn-MnO2 system with enhanced Mn4+/Mn2+ electrochemical contribution is introduced using an Al3+-based electrolyte. Compared with conventional Zn2+ electrolytes, the hybrid Al3+/Zn2+ cell offers higher output voltage of 1.75 V, capacities up to 469 mAh g-1, and outstanding energy densities up to ≈730 Wh kg-1 at 0.3 A g-1. Besides, the Al3+-enabled Zn-MnO2 battery shows 100% capacity and energy density retention after 10,000 cycles at 2 A g-1. Even at a high mass-loading of 6.2 mg cm-2, a capacity of ≈200 mAh g-1 is maintained for over 100 cycles. This outstanding performance is related to the contribution of different intercalation and reaction mechanisms, as proved by the combination of electrochemical analysis and ex-situ x-ray diffraction characterization of the cells at different discharge stages. Al3+ ions, as Lewis strong acid, contribute to capacity in two significant ways: through a highly reversible intercalation/de-intercalation that substantially boosts capacitance at low current rates, and promoting the Mn4+/Mn2+ reaction aided by H+ that dominates the capacitance at higher current rates. Overall, this work demonstrates a practical Zn-MnO2 battery with a high potential for low-cost stationary energy storage habilitated by multiple ion co-intercalation.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Boosting high-loading zinc-ion battery performance: Zn-Doped δ-MnO2 cathodes to promote Zn2+ storage

  • Chacón-Borrero, Jesús
  • Chang, Xingqi
  • Min, Zhiwen
  • Yu, Jing
  • Montaña-Mora, Guillem
  • Mejia-Centeno, Karol V.
  • Sun, Yuanmiao
  • Zhou, Xiaolong
  • Tunmee, Sarayut
  • Kidkhunthod, Pinit
  • Li, Junshan
  • Llorca, Jordi
  • Arbiol, Jordi
  • Cabot, Andreu
Rechargeable aqueous zinc-ion batteries (AZIBs) have emerged as a leading contender for stationary energy storage systems due to their low cost, safety, and environmental sustainability. However, their widespread practical application is hindered by the limited stability and capacity of current AZIB cathodes, such as manganese oxide (MnO<inf>2</inf>), which affects their long-term cost-effectiveness. To overcome this limitation, we introduce zinc (Zn) doping in δ-MnO<inf>2</inf>, which modulates the electronic states of Mn atoms, suppresses Jahn–Teller distortion, and enhances structural stability. Additionally, the use of a binder-free, self-supported porous electrode without current collectors facilitates three-dimensional ion diffusion, further improving electrochemical performance. As a result, the assembled AZIBs demonstrate outstanding rate capability, delivering 440 mAh∙g<sup>-1</sup> at 0.2 A∙g<sup>-1</sup> and retaining 118 mAh∙g<sup>-1</sup> at 24 A∙g<sup>-1</sup> for Zn-doped δ-MnO<inf>2</inf>, outperforming the bare δ-MnO<inf>2</inf> with 356 mAh∙g<sup>-1</sup> at 0.2 A∙g<sup>-1</sup> and 80 mAh∙g<sup>-1</sup> at 24 A∙g<sup>-1</sup>. Additionally, the Zn-doped δ-MnO<inf>2</inf> exhibits excellent cycling performance with ∼100 % capacity retention after 6000 cycles at 150 mAh∙g<sup>-1</sup> at 10 A∙g<sup>-1</sup>. Furthermore, Zn-doped MnO<inf>2</inf> electrodes integrated with carbon nanotubes achieve a high capacity of ∼210 mAh∙g<sup>-1</sup>, even at an ultrahigh mass loading (∼20 mg∙cm<sup>-2</sup>) at 0.6 mA∙g<sup>-1</sup>. While energy storage in MnO<inf>2</inf> involves the reaction and insertion of H<sup>+</sup>, Mn<sup>2+</sup>, and Zn<sup>2+</sup> cations, density functional theory calculations reveal that Zn intercalation is the dominant storage mechanism in these cells. Overall, this study highlights the potential of Zn-doped MnO<inf>2</inf> cathodes as a promising strategy for advancing the stability, capacity, and rate performance of next-generation AZIBs., This work was supported by the project SyDECat (PID2022–136883OB-C22), financed by the Spanish MCIN/AEI, EHAWEDRY (964524), financed by European EXCELLENT SCIENCE – Further and Emerging Technologies, the National Natural Science Foundation of China (52272054, 52125105, 52061160484, 51972329), Natural Science Foundation of Guangdong Province (2019TX05L389, 2022A1515011365), Shenzhen Science and Technology Planning Project (GJHZ20220913142809019, JCYJ20200109115624923), and the Foundation of the National Research Council of Thailand (N42A650253). Thanks to the China Scholarship Council (CSC) for the scholarship support. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023–149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. Grant RED2022–134508-T (CAT&SCALE) funded by MCIN/AEI /10.13039/501100011033. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021–001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16–014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM. [59] J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and projects MCIN/FEDER PID2021–124572OB-C31, CEX2023–001300-M, and GC 2021 SGR 01061., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021–001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023–001300-M), Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Characterization of electrokinetic and membrane properties of nanoporous polyimide films via measurements of time-resolved pressure-induced potential

  • Bondarenko, Mykola
  • Koter, Stanislaw
  • Yaroshchuk, Andriy|||0000-0002-6364-6840
Charged nanoporous films have interesting ion-separation properties essentially controlled by pore-surface charge density. This (or a related zeta-potential) is often estimated from the so-called streaming potential. However, with nanoporous membranes in sufficiently dilute electrolyte solutions, the pressure-induced electrical response is due not only to streaming potential but also to an electrical response to concentration gradients arising because of a partial salt rejection by charged nanopores. In this study, we refine the methodology of interpretation of measurements of transient filtration potential developed by us previously and apply it to the determination of electrokinetic and membrane properties (in particular, diffusion permeance) of nanoporous polyimide films developed for uses as battery/supercapacitor separators. Diffusion permeance is directly related to electrical conductance, which is an important property of battery/supercapacitor separators. We observe that in dilute electrolyte solutions (<2 mM KCl), the electrical response to an applied pressure difference is dominated by the concentration potential and not by the classical streaming potential contrary to what is often tacitly assumed. The development of concentration gradients across and around the film takes some time, which enables separate determination of instantaneous (streaming potential) and time-delayed (concentration potential) components. An improved interpretation procedure developed in this study enables estimates of impact of non-linear and osmotic corrections and makes the interpretation more reliable. The results of this study are important for the identification and optimization of novel innovative applications for nanoporous films., Tokyo Ohka Kogyo (TOK) Company is acknowledged for the supply of the samples of nanoporous PI films. The authors are grateful to T. Yokoyama (New Business Development Dept. Of TOK) for information on the film properties. A.Y. and M.B. acknowledge funding from the European Union through Project H2020-FETOPEN-2018-2019-2020-01- 964524 “Energy harvesting via wetting/drying cycles with nanoporous electrodes (EHAWEDRY)”. S.K. thanks for the funds for fundamental research from Nicolaus Copernicus University in Torun, Poland (Faculty of Chemistry – “Membranes and membrane separation processes - fundamental and applied research”)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Characterization of electrokinetic and membrane properties of nanoporous polyimide films via measurements of time-resolved pressure-induced potential

  • Bondarenko, Mykola
  • Koter, Stanislaw
  • Yaroshchuk, Andriy
Charged nanoporous films have interesting ion-separation properties essentially controlled by pore-surface charge density. This (or a related zeta-potential) is often estimated from the so-called streaming potential. However, with nanoporous membranes in sufficiently dilute electrolyte solutions, the pressure-induced electrical response is due not only to streaming potential but also to an electrical response to concentration gradients arising because of a partial salt rejection by charged nanopores. In this study, we refine the methodology of interpretation of measurements of transient filtration potential developed by us previously and apply it to the determination of electrokinetic and membrane properties (in particular, diffusion permeance) of nanoporous polyimide films developed for uses as battery/supercapacitor separators. Diffusion permeance is directly related to electrical conductance, which is an important property of battery/supercapacitor separators. We observe that in dilute electrolyte solutions (<2 mM KCl), the electrical response to an applied pressure difference is dominated by the concentration potential and not by the classical streaming potential contrary to what is often tacitly assumed. The development of concentration gradients across and around the film takes some time, which enables separate determination of instantaneous (streaming potential) and time-delayed (concentration potential) components. An improved interpretation procedure developed in this study enables estimates of impact of non-linear and osmotic corrections and makes the interpretation more reliable. The results of this study are important for the identification and optimization of novel innovative applications for nanoporous films., Tokyo Ohka Kogyo (TOK) Company is acknowledged for the supply of the samples of nanoporous PI films. The authors are grateful to T. Yokoyama (New Business Development Dept. Of TOK) for information on the film properties. A.Y. and M.B. acknowledge funding from the European Union through Project H2020-FETOPEN-2018-2019-2020-01- 964524 “Energy harvesting via wetting/drying cycles with nanoporous electrodes (EHAWEDRY)”. S.K. thanks for the funds for fundamental research from Nicolaus Copernicus University in Torun, Poland (Faculty of Chemistry – “Membranes and membrane separation processes - fundamental and applied research”)., Peer Reviewed, Postprint (published version)