Skip to main content

DESARROLLO DE RECUBRIMIENTOS COMESTIBLES NANOESTRUCTURADOS PARA EL TRANSPORTE DE COMPUESTOS ACTIVOS

AGL2009-11475

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2009
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSIDAD DE LLEIDA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Layer-by-layer assembly of food-grade alginate/chitosan nanolaminates: formation and physicochemical characterization

  • Acevedo Fani, Alejandra
  • Salvia Trujillo, Laura
  • Soliva-Fortuny, Robert
  • Martín Belloso, Olga
The alternate deposition of oppositely charged materials (layer-by-layer technique) is an effective approach to functionalize materials. Biopolymer-based nanolaminates obtained by the layer-by-layer technique can also be used to change the surface properties of food products or food contact materials. However, the final properties of nanolaminates may be affected by the conditions of the adsorbing solutions. The objective of this study was to form and characterize the physicochemical properties of nanolaminates assembled from alginate and chitosan solutions. The effect of pH, ionic strength and polysaccharide concentration on the properties of the adsorbing solutions was also evaluated. The ζ-potential, viscosity and whiteness index of the solutions were assessed before the assembly. Alginate/chitosan nanolaminates were characterized in terms of UV-visible spectroscopy, surface ζ-potential, contact angle, DSC analysis and SEM. The absorbance increased as a function of the number of polysaccharide layers on the substrate, suggesting an increase in the mass adsorbed. The surface ζ-potential of nanolaminates changed depending on the last polysaccharide deposited. Alginate layers were negatively charged, whereas chitosan layers were positively charged. Contact angles obtained in alginate layers were ≈ 10°, being mostly hydrophilic. Chitosan layers showed higher contact angle values (80°), indicating a more hydrophobic behavior. Microscopic examinations revealed the presence densely packed structures that corresponded to alginate/chitosan nanolaminates, having an estimated thickness of 700 nm. The results obtained in this work lay the basis for the rational design of polysaccharide-based nanolaminates in the food sector., This research was supported by the Ministerio de Ciencia e Innovación (Spain) (project AGL2009-11475). Author Acevedo-Fani also thanks to the University of Lleida for the pre-doctoral grant.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Formation, stability and antioxidant activity of food-grade multilayer emulsions containing resveratrol

  • Acevedo Fani, Alejandra
  • Silva, Hélder Daniel
  • Soliva-Fortuny, Robert
  • Martín Belloso, Olga
  • Vicente, António Augusto
Interfacial deposition of biopolymer layers on oil droplets may be a suitable strategy for increasing the emulsion stability and protection of functional ingredients. Resveratrol is a naturally occurring phenolic compound with numerous health-promoting properties, but its usage is still restricted due to its poor water solubility and high chemical instability. The aim of this study was to formulate single-layer (lactoferrin) and multilayer (lactoferrin/alginate and lactoferrin/alginate/ε-poly-l-lysine) emulsions containing resveratrol and to study the emulsions stability and antioxidant activity during storage. All primary (single-layer) emulsions had average droplet diameters below 300 nm and ζ-potentials strongly positive, allowing the electrostatic deposition of another layer of anionic biopolymer, such as alginate. Secondary (multilayer) emulsions were highly unstable at low alginate concentrations, which was attributed to the bridging flocculation. At higher alginate concentrations, secondary emulsions were rather stable. Tertiary emulsions containing either low or high ε-poly-l-lysine concentrations presented flocculation, but formulations with 0.0036% (w/w) were fairly stable. The antioxidant activity of all resveratrol-loaded emulsions did not significantly change during storage, whereas it decreased in non-encapsulated resveratrol oil from the third week onwards. This study provides useful information for the design of delivery systems for resveratrol with relevance in food applications., This research was supported by the Ministerio de Ciencia e Innovación (Spain) throughout the projects AGL2009-11475 and ALG2012-35635, and by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/04469/2013 unit and COMPETE 2020 (POCI-01-0145-FEDER-006684), Project RECI/BBB-EBI/0179/2012 (FCOMP-01-0124-FEDER-027462) and FCT Strategic Project of UID/BIO/04469/2013 unit. The authors also thank the Project “BioInd - Biotechnology and Bioengineering for improved Industrial and Agro-Food processes, REF. NORTE-07-0124-FEDER-000028” Co-funded by the Programa Operacional Regional do Norte (ON.2 – O Novo Norte), QREN, FEDER. The author A. Acevedo-Fani thanks the University of Lleida for the pre-doctoral grant. The author H. D. Silva, (SFRH/BD/81288/2011) is the recipient of a fellowship from the Fundação para a Ciência e Tecnologia (FCT, Portugal).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Photo-protection and controlled release of folic acid using edible alginate/chitosan nanolaminates

  • Acevedo Fani, Alejandra
  • Soliva-Fortuny, Robert
  • Martín Belloso, Olga
The formation, characterization, photo-protective properties and release profiles of folic acid-loaded nanolaminated films were investigated by UV-visible spectroscopy, FTIR, Raman and SEM microscopy. Food-grade alginate/chitosan nanolaminates were obtained by the layer-by-layer technique and folic acid (FA) was incorporated by post-diffusion. The FA concentration of loading solutions and immersion time significantly affected the FA content in nanolaminates. The maximum FA loading was reached using FA solutions at 10 mg/mL for 30 min (54.4 μg/cm2), or 12.5 mg/mL for 120 min (≈70 μg/cm2). Nanolaminates containing FA were more stable under ultraviolet light exposure than non-encapsulated FA. The rate and concentration of FA released from nanolaminates were greater at buffer pH 7 than at pH 3, which might play a key role in the delivery and bioavailability of nutraceuticals. These results provide important information for the design of nanolaminates containing hydrophilic active compounds for food applications., This research was supported by the Ministerio de Ciencia e Innovación throughout the projects AGL2009-11475 and MINECO ALG2012-35635. Author Acevedo-Fani also thanks to the University of Lleida for the pre-doctoral grant.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Building bridges: an integrated strategy for sustainable food production throughout the value chain

  • Albajes Garcia, Ramon
  • Cantero-Martínez, Carlos
  • Capell Capell, Teresa
  • Christou, Paul
  • Farré Martinez, Alba
  • Galceran i Nogués, Josep
  • López Gatius, Fernando
  • Marín Sillué, Sònia
  • Martín Belloso, Olga
  • Motilva Casado, Mª José
  • Nogareda, Carmina
  • Pemán García, Jesús
  • Puy Llorens, Jaume
  • Recasens i Guinjuan, Jordi
  • Romagosa Clariana, Ignacio
  • Romero Fabregat, Mª Paz
  • Sanchís Almenar, Vicente
  • Savin, Roxana
  • Slafer, Gustavo A.
  • Soliva-Fortuny, Robert
  • Viñas Almenar, Inmaculada
  • Voltas Velasco, Jordi
The food production and processing value chain is under pressure from all sides-increasing demand driven by a growing and more affluent population; dwindling resources caused by urbanization, land erosion, pollution and competing agriculture such as biofuels; and increasing constraints on production methods driven by consumers and regulators demanding higher quality, reduced chemical use, and most of all environmentally beneficial practices 'from farm to fork'. This pressure can only be addressed by developing efficient and sustainable agricultural practices that are harmonized throughout the value chain, so that renewable resources can be exploited without damaging the environment. Bridges must, therefore, be built between the diverse areas within the food production and processing value chain, including bridges between different stages of production, between currently unlinked agronomic practices, and between the different levels and areas of research to achieve joined-up thinking within the industry, so that the wider impact of different technologies, practices and materials on productivity and sustainability is understood at the local, regional, national and global scales. In this article, we consider the challenges at different stages and levels of the value chain and how new technologies and strategies could be used to build bridges and achieve more sustainable food/feed production in the future., Research at the University of Lleida is supported by MINECO, Spain (AGL2009-11006; AGL2009-11475; AGL2009-11964; AGL2009-13517-C03-02; AGL2010-21572; AGL-22050-C03-01; AGL2010-22084-CO2-O1; AGL2010-22182; AGL2011-23996; AGL2011-24862; AGL2011-30529-C02-02; AGL2012-35300; AGL2012-40144-C03-03; BIO2011-22525; BIO2011-23324; BIO2007-61413; CTQ2009-07831; CTM2009-14612 and PIM2010PKB-00746); EU FP7 Integrated Project 222716 SmartCell; EU FP7 European Research Council IDEAS Advanced Grant (to PC) Program-BIOFORCE; EU FP7 Large-scale integrated project KBBE 222738 Selection and improving of fit-for-purpose sampling procedures for specific foods and risks (BASELINE); EU FP7 Program-SICA project KBBE 222690; COST Action FA0804: Molecular farming: plants as a production platform for high value proteins; COST Action FA 1006: Plant Engine; COST Action TD1104: Development of electroporation-based technologies; Centre CONSOLIDER on Agrigenomics funded by MICINN, Spain; the HENUFOOD project (CEN-20101016) as part of the CENIT program and the INCOMES project as part of the INNPRONTA 2011.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Layer-by-layer assembly of food-grade alginate/chitosan nanolaminates: formation and physicochemical characterization

  • Acevedo Fani, Alejandra
  • Salvia Trujillo, Laura
  • Soliva-Fortuny, Robert
  • Martín Belloso, Olga
The alternate deposition of oppositely charged materials (layer-by-layer technique) is an effective approach to functionalize materials. Biopolymer-based nanolaminates obtained by the layer-by-layer technique can also be used to change the surface properties of food products or food contact materials. However, the final properties of nanolaminates may be affected by the conditions of the adsorbing solutions. The objective of this study was to form and characterize the physicochemical properties of nanolaminates assembled from alginate and chitosan solutions. The effect of pH, ionic strength and polysaccharide concentration on the properties of the adsorbing solutions was also evaluated. The ζ-potential, viscosity and whiteness index of the solutions were assessed before the assembly. Alginate/chitosan nanolaminates were characterized in terms of UV-visible spectroscopy, surface ζ-potential, contact angle, DSC analysis and SEM. The absorbance increased as a function of the number of polysaccharide layers on the substrate, suggesting an increase in the mass adsorbed. The surface ζ-potential of nanolaminates changed depending on the last polysaccharide deposited. Alginate layers were negatively charged, whereas chitosan layers were positively charged. Contact angles obtained in alginate layers were ≈ 10°, being mostly hydrophilic. Chitosan layers showed higher contact angle values (80°), indicating a more hydrophobic behavior. Microscopic examinations revealed the presence densely packed structures that corresponded to alginate/chitosan nanolaminates, having an estimated thickness of 700 nm. The results obtained in this work lay the basis for the rational design of polysaccharide-based nanolaminates in the food sector., This research was supported by the Ministerio de Ciencia e Innovación (Spain) (project AGL2009-11475). Author Acevedo-Fani also thanks to the University of Lleida for the pre-doctoral grant.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Photo-protection and controlled release of folic acid using edible alginate/chitosan nanolaminates

  • Acevedo Fani, Alejandra
  • Soliva-Fortuny, Robert
  • Martín Belloso, Olga
The formation, characterization, photo-protective properties and release profiles of folic acid-loaded nanolaminated films were investigated by UV-visible spectroscopy, FTIR, Raman and SEM microscopy. Food-grade alginate/chitosan nanolaminates were obtained by the layer-by-layer technique and folic acid (FA) was incorporated by post-diffusion. The FA concentration of loading solutions and immersion time significantly affected the FA content in nanolaminates. The maximum FA loading was reached using FA solutions at 10 mg/mL for 30 min (54.4 μg/cm2), or 12.5 mg/mL for 120 min (≈70 μg/cm2). Nanolaminates containing FA were more stable under ultraviolet light exposure than non-encapsulated FA. The rate and concentration of FA released from nanolaminates were greater at buffer pH 7 than at pH 3, which might play a key role in the delivery and bioavailability of nutraceuticals. These results provide important information for the design of nanolaminates containing hydrophilic active compounds for food applications., This research was supported by the Ministerio de Ciencia e Innovación throughout the projects AGL2009-11475 and MINECO ALG2012-35635. Author Acevedo-Fani also thanks to the University of Lleida for the pre-doctoral grant.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Building bridges: an integrated strategy for sustainable food production throughout the value chain

  • Albajes Garcia, Ramon
  • Cantero-Martínez, Carlos
  • Capell Capell, Teresa
  • Christou, Paul
  • Farré Martinez, Alba
  • Galceran i Nogués, Josep
  • López Gatius, Fernando
  • Marín Sillué, Sònia
  • Martín Belloso, Olga
  • Motilva Casado, Mª José
  • Nogareda, Carmina
  • Pemán García, Jesús
  • Puy Llorens, Jaume
  • Recasens i Guinjuan, Jordi
  • Romagosa Clariana, Ignacio
  • Romero Fabregat, Mª Paz
  • Sanchís Almenar, Vicente
  • Savin, Roxana
  • Slafer, Gustavo A.
  • Soliva-Fortuny, Robert
  • Viñas Almenar, Inmaculada
  • Voltas Velasco, Jordi
The food production and processing value chain is under pressure from all sides-increasing demand driven by a growing and more affluent population; dwindling resources caused by urbanization, land erosion, pollution and competing agriculture such as biofuels; and increasing constraints on production methods driven by consumers and regulators demanding higher quality, reduced chemical use, and most of all environmentally beneficial practices 'from farm to fork'. This pressure can only be addressed by developing efficient and sustainable agricultural practices that are harmonized throughout the value chain, so that renewable resources can be exploited without damaging the environment. Bridges must, therefore, be built between the diverse areas within the food production and processing value chain, including bridges between different stages of production, between currently unlinked agronomic practices, and between the different levels and areas of research to achieve joined-up thinking within the industry, so that the wider impact of different technologies, practices and materials on productivity and sustainability is understood at the local, regional, national and global scales. In this article, we consider the challenges at different stages and levels of the value chain and how new technologies and strategies could be used to build bridges and achieve more sustainable food/feed production in the future., Research at the University of Lleida is supported by MINECO, Spain (AGL2009-11006; AGL2009-11475; AGL2009-11964; AGL2009-13517-C03-02; AGL2010-21572; AGL-22050-C03-01; AGL2010-22084-CO2-O1; AGL2010-22182; AGL2011-23996; AGL2011-24862; AGL2011-30529-C02-02; AGL2012-35300; AGL2012-40144-C03-03; BIO2011-22525; BIO2011-23324; BIO2007-61413; CTQ2009-07831; CTM2009-14612 and PIM2010PKB-00746); EU FP7 Integrated Project 222716 SmartCell; EU FP7 European Research Council IDEAS Advanced Grant (to PC) Program-BIOFORCE; EU FP7 Large-scale integrated project KBBE 222738 Selection and improving of fit-for-purpose sampling procedures for specific foods and risks (BASELINE); EU FP7 Program-SICA project KBBE 222690; COST Action FA0804: Molecular farming: plants as a production platform for high value proteins; COST Action FA 1006: Plant Engine; COST Action TD1104: Development of electroporation-based technologies; Centre CONSOLIDER on Agrigenomics funded by MICINN, Spain; the HENUFOOD project (CEN-20101016) as part of the CENIT program and the INCOMES project as part of the INNPRONTA 2011.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Formation, stability and antioxidant activity of food-grade multilayer emulsions containing resveratrol

  • Acevedo Fani, Alejandra
  • Silva, Hélder Daniel
  • Soliva-Fortuny, Robert
  • Martín Belloso, Olga
  • Vicente, António Augusto
Interfacial deposition of biopolymer layers on oil droplets may be a suitable strategy for increasing the emulsion stability and protection of functional ingredients. Resveratrol is a naturally occurring phenolic compound with numerous health-promoting properties, but its usage is still restricted due to its poor water solubility and high chemical instability. The aim of this study was to formulate single-layer (lactoferrin) and multilayer (lactoferrin/alginate and lactoferrin/alginate/ε-poly-l-lysine) emulsions containing resveratrol and to study the emulsions stability and antioxidant activity during storage. All primary (single-layer) emulsions had average droplet diameters below 300 nm and ζ-potentials strongly positive, allowing the electrostatic deposition of another layer of anionic biopolymer, such as alginate. Secondary (multilayer) emulsions were highly unstable at low alginate concentrations, which was attributed to the bridging flocculation. At higher alginate concentrations, secondary emulsions were rather stable. Tertiary emulsions containing either low or high ε-poly-l-lysine concentrations presented flocculation, but formulations with 0.0036% (w/w) were fairly stable. The antioxidant activity of all resveratrol-loaded emulsions did not significantly change during storage, whereas it decreased in non-encapsulated resveratrol oil from the third week onwards. This study provides useful information for the design of delivery systems for resveratrol with relevance in food applications., This research was supported by the Ministerio de Ciencia e Innovación (Spain) throughout the projects AGL2009-11475 and ALG2012-35635, and by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/04469/2013 unit and COMPETE 2020 (POCI-01-0145-FEDER-006684), Project RECI/BBB-EBI/0179/2012 (FCOMP-01-0124-FEDER-027462) and FCT Strategic Project of UID/BIO/04469/2013 unit. The authors also thank the Project “BioInd - Biotechnology and Bioengineering for improved Industrial and Agro-Food processes, REF. NORTE-07-0124-FEDER-000028” Co-funded by the Programa Operacional Regional do Norte (ON.2 – O Novo Norte), QREN, FEDER. The author A. Acevedo-Fani thanks the University of Lleida for the pre-doctoral grant. The author H. D. Silva, (SFRH/BD/81288/2011) is the recipient of a fellowship from the Fundação para a Ciência e Tecnologia (FCT, Portugal).