Skip to main content

DESARROLLO DE UN SISTEMA NO DESTRUCTIVO DE CONTROL DE CALIDAD Y SEGURIDAD EN CARNE Y PRODUCTOS CARNICOS MEDIANTE ESPECTROSCOPIA DIELECTRICA.

AGL2011-30096

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2011
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A thermodynamic model for hot air microwave drying of orange peel

  • Talens Vila, Clara
  • Castro Giraldez, Marta|||0000-0001-9360-6869
  • Fito, Pedro J.|||0000-0001-9666-276X
[EN] The citrus juice industry produces a great amount of waste that needs innovation and development to become products. There is a continuous demand to develop innovative approaches for the valorization of citrus by-products by applying environmentally and economically sustainable processes. One of the critical steps for by-products stabilization is the drying operation. The aim of this work was to develop a thermodynamic model for understanding internal heating and water transport mechanisms occurring from the inside to the outside of orange peels during hot air-microwave drying, and to predict the chemical and structural transformations. Different microwave energies (2, 4 and 6 W/g) combined with hot air (HAD) at 55 degrees C were used for drying citrus peels (5,15, 40, 60 and 120 min). Mass, volume, surface, water activity, moisture, and permittivity were measured in fresh and dried samples. A thermodynamic model was developed to explain the mechanisms involved in mass and energy transports throughout the combined drying by hot air and microwave. This model allows optimizing the traditional hot air drying, by coupling microwave, of orange peel waste as a novel process for citrus by-products valorization, reducing the process time and therefore process costs. (C) 2015 Elsevier Ltd. All rights reserved., The authors would like to acknowledge the Basque Government for the financial support of the project (LasaiFood). The author Marta Castro-Giraldez wants to thanks to the UPV Postdoctoral Program (PAID-10-14) from Universidad Politecnica de Valencia for their support. The authors acknowledge the financial support from the Spanish Ministerio de Ciencia e Innovacion throughout the project AGL2011-30096.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of the application of dielectric spectroscopy to predict the water activity of meat during drying process

  • Traffano Schiffo, María Victoria
  • Castro Giraldez, Marta|||0000-0001-9360-6869
  • Colom Palero, Ricardo José|||0000-0003-0704-4906
  • Fito, Pedro J.|||0000-0001-9666-276X
Drying is considered the most expensive operation because of the time and control required; therefore, it is necessary to optimize this stage of the production process. The measurement of dielectric properties appears to be a promising method for on-line monitoring of the drying process in the meat industry. Permittivity was measured for raw and dried Longissimus dorsi pork samples. The dielectric spectra were measured with an Agilent 85070E open-ended coaxial probe connected to an Agilent E8362B Vector Network Analyser in the frequency range of 500 MHz to 20 GHz. With this technique it was possible to conclude that there is a direct relationship between the dielectric loss factor at 20 GHz, considering the number of water molecules on the surface of sample. It was possible to determine the point of water activity at which the surface temperature reaches the air drying temperature, by using the loss angle at 20 GHz. At this point of water activity, the liquid phase disappears and internal transport controls the drying process. As a result, it was possible to develop a useful tool to predict the surface water activity by using the loss angle at 20 GHz., The authors acknowledge the financial support of the Spanish Ministerio de Ciencia e Innovacion through the project AGL2011-30096 and also for the financial support from ERASMUS MUNDUS (Eurotango II Programme) for a scholarship to support Maria Victoria Traffano Schiffo's PhD studies at Universidad Politecnica de Valencia, Espana. The author Marta Castro-Giraldez wishes to thank the UPV Postdoctoral Program (PAID-10-14) of Universidad Politecnica de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Application of infrared thermography and dielectric spectroscopy for controlling freezing process of raw potato

  • Cuibus, Lucian
  • Fabbri, Angelo
  • Castro Giraldez, Marta|||0000-0001-9360-6869
  • Fito, Pedro J.|||0000-0001-9666-276X
[EN] Freezing technique is a very useful method for food preservation, although it sometimes produces damages in the product. The distribution of temperatures of raw potato was measured during the freezing operation by using an infrared thermographic camera Thermal Imager Optris PI160. Moreover, volume, moisture and water activity were measured before and after the freezing process. Cryo-SEM was also used to analyze the microstructure of fresh, frozen and thawed potato. The dielectric spectra of potato samples were measured before freezing and after defreeze, using an Agilent 85070E Open-ended Coaxial Probe connected to a network analyzer Agilent E8362B in the frequency range from 500 MHz to 20 GHz. The aim of this work was to monitor the temperature of potato surface during the freezing operation and to determine the water chemical potential and the structural changes of potato during this process, in order to determine the water motion throughout the freezing. The results showed important relations between the heat flux, water chemical potential gradients and structural changes. The paper demonstrated that infrared thermography and dielectric properties can be considered very important nondestructive tools for monitoring the freezing process of potato. Industrial relevance: The results of this research article are demonstrated to be useful for describing the freezing process of raw potato. Thus, the industrial relevance is clear because two nondestructive techniques have been used for this purpose: infrared thermography and dielectric properties. On the other hand, a microstructural study of fresh, frozen and thawed potato has been made. For all these reasons we are sending to this journal "Innovative Food Science and Emerging Technologies" our results. (C) 2013 Elsevier Ltd. All rights reserved., The authors acknowledge the financial support from the Spanish Ministerio de Ciencia e Innovacion throughout the project AGL2011-30096. Author Marta Castro-Giraldez thanks the Campus de Excelencia Internacional VLC/CAMPUS for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermodynamic approach of meat freezing process

  • Castro Giraldez, Marta|||0000-0001-9360-6869
  • Fito, Pedro J.|||0000-0001-9666-276X
  • Balaguer-Cuenca, Nuria
  • Hinarejos, E.
[EN] Frozen storage is a method widely implemented in meat industry in order to maintain the nutritional value and sensorial characteristics of meat products. The aim of this research was to implement and validate the use of the infrared technique as a non-destructive control tool to monitor the physicochemical phenomena that occurred during the freezing stage. This enables to evaluate the final impact of this operation in a complex system such as meat To do this, the evolution of the freezing process in pork loin (Longissimus dorsi) was followed by a thermographic camera Optris PI (R) 160 thermal imager (Optris GmbH, Berlin, Germany), whose spectral infrared range of wavelength is comprised between 7.5 and 13 mu m. The results obtained have demonstrated the existence of a chemical potential gradient which caused an internal flux of water. In turn, as a result of nucleation phenomena and the influence of the surface tension existent, a new water chemical potential gradient appeared, leading to the displacement of water molecules towards the ice agglomerates. This provoked the progressive dehydration of the tissue areas immediately close to the ice crystals. Micrographs obtained in different positions of the meat tissue confirm this theory. Industrial relevance: Currently, there is a significant gap in the knowledge of the complex phenomena that occurred during food freezing. This research develops a thermodynamic model which provides an accurate explanation and a new insight of the main mechanisms involved in the meat freezing process. Moreover, this model enables to leave a proof of the real structural impact that occurred in the muscular tissues, as a consequence of the generation of ice crystals and agglomerates. In order to carry out this research, the thermal imaging (TI) technique has been used. This is an innovative and emergent technology whose popularity and use at the food industry has experienced a significant growth in recent years. The results obtained represent a starting point for the future development of on-line cold chain monitoring systems in the food industry. The aim is no other than to provide the necessary basis to meet current demands for food quality and safety. (C) 2014 Elsevier Ltd. All rights reserved., The authors acknowledge the financial support from the Spanish Ministerio de Ciencia e Innovacion throughout the project AGL2011-30096.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermodynamic model of meat drying by infrarred thermography

  • Traffano-Schiffo, Maria Victoria
  • Balaguer-Cuenca, Nuria
  • Castro Giraldez, Marta|||0000-0001-9360-6869
  • Fito, Pedro J.|||0000-0001-9666-276X
[EN] Drying operation is one of the most important unit operations used to preserve meat products. Drying process involves a lot of mechanisms coupled together, and traditional kinetic theory of drying explains part of them, covering up the most important behaviors in the falling drying period. Therefore, it is necessary to determine the critical points of each transformation throughout the drying, and to analyse and quantify all of them. In this sense, an irreversible thermodynamic model has been developed, focusing on the falling drying period. In this work, infrared thermography has been used in order to obtain the evolution of meat surface temperature during drying operation. Infrared measurements were made with an Optris PI (R) 160 thermal imager (Optris GmbH, Berlin, Germany), with a spectral infrared range of wavelength from 7.5 to 13 mu m. Surface water activity, volume, mass and moisture were obtained at different drying times. Drying analysis shows five stages, the traditional induction and the constant kinetic drying period (wet temperature of 22 degrees C) and three more stages in the falling drying period, shared out by the evolution of the surface internal energy and the vitreous transition. (C) 2013 Elsevier Ltd. All rights reserved., Author Marta Castro-Giraldez thanks the Campus de Excelencia Internacional VLC/CAMPUS for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Control of the brewing process by using microwaves dielectric spectroscopy

  • Velazquez-Varela, Jose
  • Castro Giraldez, Marta|||0000-0001-9360-6869
  • Fito, Pedro J.|||0000-0001-9666-276X
[EN] Dielectric spectroscopy in microwave and radiofrequency region is an emerging control technique used to obtain information about the transformation of biological systems. In microwave region, the main interaction is produced with different food constituents and water molecule. In this context, the dielectric properties were analyzed during beer production in order to improve beer quality. There were also analyzed the most important physical and chemical properties of beer through the process. Good correlations were found between loss tangent at 10 GHz and the ethanol and sugars concentration. Therefore, this technique can be used as a fast, accurate and non-destructive control method of beer production. (C) 2013 Elsevier Ltd. All rights reserved., The authors acknowledge the financial support from the Spanish Ministerio de Ciencia e Innovacion throughout the project AGL2011-30096. Author M. Castro-Giraldez thanks the Campus de Excelencia Internacional VLC/CAMPUS for their support. Author J. Velazquez-Varela thanks the Consejo Nacional de Ciencia y Tecnologia (CONACyT) of Mexico for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of the effect of microwave power coupled with hot air drying on orange peel by dielectric spectroscopy

  • Talens Vila, Clara
  • Castro Giraldez, Marta|||0000-0001-9360-6869
  • Fito, Pedro J.|||0000-0001-9666-276X
[EN] Monitoring moisture and water activity during drying is crucial for process optimization, avoiding inadequate uses of energy. The main objective of this work was to study the dielectric properties of orange peel during hot air drying at 55 °C (HAD) and microwave power coupled with hot air drying at different power intensities (2 W/g, 4 W/g and 6 W/g). At 5, 15, 40, 60 and 120 min mass, aw, moisture, and permittivity were measured in fresh and dried samples. Results allowed developing a dielectric isotherm technique by adapting the GAB model to predict aw in dried orange peel by using ε'ε' (20 GHz). The physical meaning of the dielectric isotherm parameters (View the MathML sourceε0' and Cd) was studied. The value of View the MathML sourceε0' at 20 GHz (γ-dispersion) represents the induction effect of the minimum quantity of adsorbed water or the monomolecular moisture layer. The parameter Cd is related with isosteric heat, as well as the C parameter of the GAB model. The application of MW power produced an increase of isosteric heat or adsorption energy of the monomolecular layer, improving surface tension of samples and thus the hygroscopicity, explaining the reduction of the View the MathML sourceε0' independently of the quantity of the water molecules adsorbed., The authors would like to acknowledge the Basque Government for the financial support of the project (LasaiFood). The author Marta Castro-Giraldez wants to thanks to the UPV Postdoctoral Program (PAID-10-14) from Universidad Politecnica de Valencia for their support. The authors acknowledge the financial support from the Spanish Ministerio de Ciencia e Innovacion throughout the project AGL2011-30096.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermodynamic analysis of salting cheese process

  • Velazquez-Varela, Jose
  • Fito, Pedro J.|||0000-0001-9666-276X
  • Castro Giraldez, Marta|||0000-0001-9360-6869
[EN] The manufacture of cheese is a complex process which involves several phases and biochemical transformations. All these variables have important influence over the performance, composition and quality of cheese. Therefore, the optimization of the manufacturing process of this product is difficult. Salting process involves complex phenomena which are hardly to explain, and one of its main problems is the difficulty to control de simultaneous water and salt fluxes into the product and to control the proteins transformations throughout process. Water and salt transport during osmotic treatment of cheese in saturated brine, were investigated by using a thermodynamic approach. Moisture, water activity, dielectric properties and volume were measured in treated and reposed samples. A nonlinear irreversible thermodynamic model has been developed to determine the transport of water and ions through the structure of cheese, obtaining a phenomenological coefficient of 1.8 . 10(-5) mol(2) s(-1) m(-2). This model describes various phenomena that occur in salting cheese process, including the different driving forces. (C) 2014 Elsevier Ltd. All rights reserved., Author J. Velazquez-Varela thanks the Consejo Nacional de Ciencia y Tecnologia (CONACyT) of Mexico for their support.