Skip to main content

DISEÑO DE UN BIOSENSOR DE ADN BASADO EN TECNOLOGIA HFF-QCM PARA LA DETECCION DE SUSTANCIAS ADULTERANTES EN MIEL

AGL2016-77702-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Monitoring honey adulteration with sugar syrups using an automatic pulse voltammetric electronic tongue

  • Sobrino-Gregorio, Lara
  • Bataller Prats, Román
  • Soto Camino, Juan
  • Escriche Roberto, Mª Isabel|||0000-0003-0180-0360
[EN] The new tendency to detect adulterated honey is the development of affordable analytical equipment that is in-line and manageable, enabling rapid on site screening. Therefore, the aim of this work was to apply an electronic tongue based on potential multistep pulse voltammetry, in combination with multivariate statistical techniques to detect and quantify syrup in honey. Pure monofloral honey (heather, orange blossom and sunflower), syrup (rice, barley and corn), and samples simulating adulterated honey with different percentages of syrup (2.5, 5, 10, 20 and 40) were evaluated. An automatic, electrochemical system for cleaning and polishing the electronic tongue sensors (Ir, Rh, Pt, Au) significantly improved the repeatability and accuracy of the measurements. PCA analysis showed that the proposed methodology is able to distinguish between types of pure honey and syrup, and their different levels of adulterants. A subsequent PLS analysis successfully predicted the level of the adulterants in each honey, achieving good correlations considering the adjusting parameters. The best results being for sunflower honey adulterated with corn syrup and heather honey with barley syrup (r2 ¿ 0.997), and heather with corn (r2 ¿ 0.994) whereas the weakest was found for heather honey adulterated with brown rice syrup (r2 ¿ 0.763) and orange blossom honey with corn syrup (r2 ¿ 0.879). The measurement system here proposed could be a very quick and effective option for the honey packaging sector with the finality of providing information about a characteristic as important as the adulteration of honey., This study forms part of the projects funded by the "Agencia Estatal de Investigacion" (AGL2016-77702-R) and by the "Generalitat Valenciana" (AICO/2015/104) of Spain, for which the authors are grateful.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Proyecto fin de carrera (BachelorThesis)

IMPLEMENTACIÓN DE UN SISTEMA DE DISPENSACIÓN AUTOMÁTICA DE MUESTRA PARA APLICACIONES DE SEGURIDAD Y CALIDAD ALIMENTARIA

  • Valcárcel Manzano, Patricia
[ES] El presente TFG tiene como objetivo la implementación y puesta en marcha de un sistema de dispensación automática de muestra para aplicaciones de seguridad y calidad alimentaria. El sistema de dispensación de muestra y sistema de fluídica que se pretende implementar se enmarca dentro de las tareas del objetivo 3 del proyecto AGL2016-77702-R ¿Diseño de un biosensor de ADN basado en tecnología HFF-QCM para la detección de sustancias adulterantes en miel¿. Las diferentes tareas que comprenderá el proyecto son las siguientes: (1) Evaluación de los diferentes módulos que forman el sistema de fluídica y el sistema muestreador (autosampler). (2) Uso del software proporcionado por el fabricante para implementar el control de los diferentes bloques que forman que el sistema. Fundamentalmente, la bomba microfluídica de presión, el controlador de presión, las válvulas de selección del medio y de cierre del canal y el autosampler. (3) Implementación de una librería API de control de todo el sistema. Como lenguaje de programación se utilizará preferentemente JAVA Netbeens, aunque se podrían utilizar otros lenguajes como Python o C. (4) Tareas experimentales de testeo consistentes en la inyección de medios líquidos coloreados que permitan una comprobación visual del sistema implementado. El trabajo será codirigido por los profesores Yolanda Jiménez (ETSIT) y Román Fernández (ETSID). Contará también con la directora experimental María Calero., [EN] The objective of this TFG is the implementation and implementation of an automatic sample dispensing system for food safety and quality applications. The sample dispensing system and fluidics system to be implemented is part of the tasks of objective 3 of the AGL2016-77702-R project "Design of a DNA biosensor based on HFF-QCM technology for the detection of adulterating substances in honey". The different tasks to be covered by the project are as follows: (1) Evaluation of the different modules that form the fluidics system and the sampling system (autosampler). (2) Use the software provided by the manufacturer to implement the control of the different blocks that form the system.Essentially, the microfluidic pressure pump, the pressure controller, the medium selection and channel closing valves and the autosampler. (3) Implementation of a system-wide control API library. JAVA Netbeens will preferably be used as a programming language, although other languages such as Python or C could be used. (4) Experimental testing tasks consisting of the injection of colored liquid media that allow a visual check of the implemented system. The work will be co-directed by Professors Yolanda Jiménez (ETSIT) and Román Fernández (ETSID). It will also feature experimental director María Calero.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A fast method for monitoring the shifts in resonance frequency and dissipation of the QCM sensors of a Monolithic array in biosensing applications

  • FERNÁNDEZ DÍAZ, ROMÁN|||0000-0002-8883-4653
  • García Narbón, José Vicente|||0000-0001-6303-8258
  • Arnau Vives, Antonio|||0000-0002-5709-1690
  • Jiménez Jiménez, Yolanda|||0000-0003-4835-9007
  • Calero-Alcarria, María Del Señor
  • Reiviakine, Ilya
[EN] Improvement of data acquisition rate remains as an important challenge in applications with Quartz Crystal Microbalance (QCM) technology where high throughput is required. To address this challenge, we developed a fast method capable of measuring the response of a large number of sensors and/or overtones, with a high time resolution. Our method, which can be implemented in a low-cost readout electronic circuit, is based on the estimation of fr (frequency shift) and D (dissipation shift) from measurements of the sensor response obtained at a single driving frequency. By replacing slow fitting procedures with a direct calculation, the time resolution is only limited by the physical characteristics of the sensor (resonance frequency and quality factor), but not by the method itself. Capabilities of the method are demonstrated by monitoring multiple overtones with a single 5 MHz sensor and a Monolithic QCM array comprising 24 50MHz-sensors. Accuracy of the method is validated and compared with the state-of-the-art, as well as with a reference method based on impedance analysis., This work was supported in part by the Ministerio de Economía, Industria y Competitividad de España-Agencia Estatal de Investigación with Fondo Europeo de Desarrollo Regional (FEDER) Funds under Grant AGL2016-77702-R and in part by the European Commission Horizon 2020 Programme (Capturing non-amplified tumor circulating DNA with ultrasound hydrodynamics) under Agreement H2020-FETOPEN-2016-2017/737212-CATCH-UDNA. The work of María Calero was supported by the Spanish Ministry of Economy, Industry and Competitiveness, Madrid, Spain, under Grant BES-2017-080246.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Avances en el esclarecimiento de la autenticidad de la miel

  • Sobrino Gregorio, Lara
[EN] Honey is currently one of the foodstuffs with the highest risk of fraud. Guaranteeing the authenticity of honey, both in terms of botanical/geographical origin and adulteration by the addition of syrups, is a matter of great concern in the EU. Therefore, the objective of this doctoral thesis has been to advance in clarifying the authenticity of honey by applying emerging analytical techniques specifically in this field. The characterization of the compounds that make up the volatile fraction of honey, by gas chromatography-mass spectrometry, can be considered a complementary method to the pollen analysis to ensure the correct labelling of the monofloral honeys that are marketed. The information of the constituent compounds of this fraction correlates well with the sensory perception of honey, therefore, this methodology is especially useful in those varieties whose pollen is under-represented (as is the case with lavender honey). In this work it has been shown that the information on the label of honey marketed as monofloral of this variety does not correspond to the usual commercial requirement; despite having the expected volatile compounds and sensory perception characteristics. However, the information on the label of honeys marketed as thyme (whose pollen is not under-represented) was correct considering the pollen content, as well as its olfactory-gustatory characteristics and volatile profile typical of this honey variety. A pulse voltammetric electronic tongue in combination with statistical analysis of main components (PCA), allows discriminating honey from different geographical origins (Mozambique, Honduras and Spain), as well as honey from different botanical origins (sunflower, orange blossom and heather monofloral). In addition, the electronic tongue is able to differentiate the addition of syrups (barley, corn or brown rice) to these honeys when this addition is over 2.5%. Applying partial least squares regressions it has been shown that the data provided by this electronic tongue adequately predicts certain physicochemical parameters such as conductivity. With regard to adulterations, the best predictions have been obtained for sunflower and heather honey with the incorporation of corn syrup and for heather honey with barley syrup. The thermal properties evaluated by differential scanning calorimetry (DSC) in combination with PCA has allowed differentiating levels of adulteration in honey (5, 10 and 20%) by adding syrups (agave, maple, cane, barley, corn and different types of rice). The addition of syrups to pure honey provoked significant changes in the thermal properties of adulterated honey, in proportion to the level of adulteration, and the type of syrup, especially due to differences in their sugar composition. The PCR technique has allowed detecting for the first time the adulteration by adding rice molasses in orange blossom honey, managing to identify adulteration percentages lower than those of other more expensive and laborious methodologies. The greatest obstacle in the application of this technique was found in the previous stage of DNA extraction, due to the difficulty in obtaining sufficient quantity and quality of the DNA for subsequent PCR amplification. Real-time PCR, by constructing a standard curve of serial dilutions of different rice DNA concentrations, allowed detecting different percentages of rice molasses addition with an accuracy of between 2 to 5%. In short, the characterisation of the volatile fraction of honeys by GC-MS and the electronic voltammetric tongue are promising techniques for the classification of monofloral honeys and the techniques of DSC and PCR are offering promising evidence of its usefulness to identify adulteration in honey by adding syrups., [ES] La miel es uno de los alimentos con mayor riesgo de sufrir fraude alimentario. Garantizar su autenticidad, tanto en lo referente al origen botánico/geográfico como a la adulteración por adición de jarabes, es un tema de gran inquietud en la Unión Europea. Por todo ello, el objetivo de esta tesis doctoral ha sido avanzar en el esclarecimiento de la autenticidad de la miel aplicando técnicas analíticas emergentes en este campo. La caracterización de los compuestos integrantes de la fracción volátil de las mieles, mediante cromatografía de gases-espectrometría de masas, se puede considerar un método complementario al polínico para garantizar el correcto etiquetado de las mieles monoflorales que se comercializan. La información de los compuestos constituyentes de dicha fracción se correlaciona bien con la percepción sensorial de las mieles, por ello, esta metodología resulta especialmente útil en aquellas variedades cuyo polen está infra-representado, como es el caso de la miel de lavanda. En este sentido, se ha puesto en evidencia que la información que se muestra en la etiqueta de mieles que se comercializan como monoflorales de esta variedad, no se corresponde con el requisito comercial habitual; a pesar de poseer compuestos volátiles y percepción sensorial característicos de la misma. Sin embargo, la información de la etiqueta de mieles comercializadas como tomillo (cuyo polen no está infra-representado) era correcta considerando el contenido de polen, así como sus características olfato-gustativas y perfil volátil típicas de esta variedad de miel. Una lengua electrónica voltamétrica de pulsos en combinación con análisis estadísticos de componentes principales (PCA), permite discriminar mieles procedentes de diferentes orígenes geográficos (Mozambique, Honduras y España), así como mieles de diferentes orígenes botánicos (monoflorales de girasol, azahar y brezo). Además, la lengua electrónica es capaz de diferenciar la adición de jarabes (cebada, maíz o arroz integral) a dichas mieles cuando ésta tiene lugar por encima de un 2.5%. Aplicando regresiones de mínimos cuadrados parciales se ha demostrado que los datos proporcionados por dicha lengua electrónica predicen adecuadamente ciertos parámetros fisicoquímicos como la conductividad. Con relación a las adulteraciones, las mejores predicciones se han obtenido para la miel de girasol y de brezo con incorporación de jarabe de maíz y para la miel de brezo con jarabe de cebada. Las propiedades térmicas evaluadas mediante calorimetría diferencial de barrido (DSC) en combinación con PCA ha permitido diferenciar niveles de adulteración en la miel (5, 10 y 20%) por adición de jarabes (agave, arce, caña, cebada, maíz y diferentes tipos de arroz). La adición de jarabes a la miel pura promovió cambios significativos en las propiedades térmicas de las mieles adulteradas, en proporción al nivel de adulteración y al tipo de jarabe, especialmente debido a las diferencias en su composición de azúcares. La técnica de PCR ha permitido por primera vez identificar la adulteración por adición de melaza de arroz en miel de azahar, logrando detectar porcentajes de adulteración menores a los de otras metodologías más costosas y laboriosas. El mayor obstáculo en la aplicación de esta técnica se encontró en la etapa previa de extracción de ADN, debido a la dificultad en la obtención de cantidad y calidad suficiente del mismo para su posterior amplificación por PCR. La PCR en tiempo real, mediante la construcción de una curva estándar de diluciones seriadas de distintas concentraciones de ADN de arroz, permitió detectar diferentes porcentajes de adición de melaza de arroz con una exactitud de hasta 2-5%. En definitiva, la GC-MS y la lengua electrónica voltamétrica son técnicas prometedoras para la clasificación de las mieles monoflorales. La primera presenta la ventaja de poder determinar compuestos volátiles característicos específicos de determinadas variedades de miel, relacionados con el origen botánico de las plantas en las que pecorean las abejas; por lo que su presencia y abundancia específica puede inequívocamente relacionarse con una determinada miel monofloral. Sin embargo, tiene la desventaja de ser una técnica cara y que requiere de personal altamente cualificado. Por el contrario, la lengua electrónica voltamétrica (construida con sensores metálicos, en combinación con un apropiado análisis estadístico), de forma rápida y sencilla, está dando resultados fiables en la discriminación de mieles por monofloralidad, procedencia geográfica y adulteración. Las técnicas de DSC y PCR están siendo efectivas para identificar adulteración de la miel por adición de jarabes, aunque para ser concluyentes con ellas se debería considerar un mayor número de tipos de mieles y jarabes a los analizados en la presente tesis doctoral. Una vez que se haya resuelto el factor limitante de la etapa de extracción de ADN, la PCR será una técnica idónea para identificar otras melazas y jarabes., [CA] La mel en l'actualitat és un dels aliments amb major risc de patir frau alimentari. Garantir l'autenticitat de la mel, tan referent a l'origen botànic/geogràfic com a l'adulteració per addició de xarops, és un tema de gran inquietud a la Unió Europea. L' objectiu d'aquesta tesi doctoral ha estat avançar en l'aclariment de l'autenticitat de la mel aplicant tècniques analítiques emergents en aquest camp. La caracterització dels compostos integrants de la fracció volàtil de les mels, mitjançant cromatografia de gasos-espectrometria de masses, es pot considerar un mètode complementari al pol¿línic per a garantir el correcte etiquetatge de les mels monoflorals que es comercialitzen. La informació dels compostos constituents d'aquesta fracció es correlaciona bé amb la percepció sensorial de les mels, per això, aquesta metodologia resulta especialment útil en aquelles varietats on el pol¿len està infra-representat, com és el cas de la mel de lavanda. En aquest sentit, s'ha posat en evidència que la informació que es mostra en l'etiqueta de mels que es comercialitzen com monoflorals d'aquesta varietat, no es correspon amb el requisit comercial habitual; malgrat posseir compostos volàtils i percepció sensorial característics d'aquesta. No obstant això, la informació de l'etiqueta de mels comercialitzades com a farigola (el pol¿len de la qual no està infra-representat) era correcta considerant el contingut de pol¿len, així com les seues característiques olfacte-gustatives i perfil volàtil típics d'aquesta varietat de mel. Una llengua electrònica voltamètrica de polsos en combinació amb anàlisis estadístiques de components principals (PCA), permet discriminar mels procedents de diferents orígens geogràfics (Moçambic, Hondures i Espanya), així com mels de diferents orígens botànics (monoflorals de gira-sol, flor del taronger i bruc). A més, la llengua electrònica és capaç de diferenciar l'addició de xarops (ordi, blat de moro o arròs integral) a aquestes mels quan aquesta té lloc per sobre d'un 2.5%. Aplicant regressions de mínims quadrats parcials s'ha demostrat que les dades proporcionades per aquesta llengua electrònica prediuen adequadament certs paràmetres fisicoquímics com la conductivitat. En relació amb les adulteracions, les millors prediccions s'han obtingut per la mel de gira-sol i de bruc amb incorporació de xarop de blat de moro i per a la mel de bruc amb xarop d'ordi. Les propietats tèrmiques avaluades mitjançant calorimetria diferencial de Flux (DSC) en combinació amb PCA ha permés diferenciar nivells d'adulteració en la mel (5, 10 i 20%) per addició de xarops (àgave, auró, canya, ordi, blat de moro i diferents tipus d'arròs). L'addició de xarops a la mel pura va promoure canvis significatius en les propietats tèrmiques de les mels adulterades, en proporció al nivell d'adulteració i a la mena de xarop, especialment a causa de les diferències en la seva composició de sucres. La tècnica de PCR ha permés per primera vegada identificar l'adulteració per addició de melassa d'arròs en mel de flor del taronger, aconseguint identificar percentatges d'adulteració menors als d'altres metodologies més costoses i laborioses. El major obstacle en l'aplicació d'aquesta tècnica es va trobar en l'etapa prèvia d'extracció d'ADN, a causa de la dificultat en l'obtenció de quantitat i qualitat suficient del mateix per a la seva posterior amplificació per PCR. La PCR en temps real, mitjançant la construcció d'una corba estàndard de dilucions seriades de diferents concentracions d'ADN d'arròs, va permetre detectar diferents percentatges d'addició de melassa d'arròs amb una exactitud de fins a 2-5%. En definitiva, la GC-MS i la llengua electrònica voltamètrica són tècniques prometedores per a la classificació de les mels monoflorals. La primera presenta l'avantatge de poder determinar compostos volàtils característics específics de determinades varietats de mel, relacionats amb l'origen botànic de les plantes en les quals picoregen les abelles; pel que la seva presència i abundància específica pot inequívocament relacionar-se amb una determinada mel monofloral. No obstant això, té el desavantatge de ser una tècnica cara i que requereix de personal altament qualificat. Per contra, la llengua electrònica, encara que inespecíficament, està donant resultats convincents de manera ràpida i senzilla en la discriminació de mels per procedència geogràfica i per adulteració. Les tècniques de DSC i PCR estan oferint evidències convincents de la seva utilitat per a identificar adulteració en la mel per addició de xarops, encara que per a ser concloents amb elles s'hauria de considerar un major nombre de tipus de mels i xarops als analitzats en la present tesi doctoral. Una vegada que s'hagi resolt el factor limitant de l'etapa d'extracció d'ADN, la PCR serà una tècnica idònia per a identificar altres melasses i xarops., Gracias a la Universitat Politècnica de València por el apoyo económico a través del programa ADSIDEO-Cooperación 2016 (Asesoramiento en la gestión de calidad y seguridad de los productos apícolas de las comunidades lencas de Honduras. Modelo de promoción social, ambiental y económico de las poblaciones rurales de Centroamérica) y por el apoyo al contrato de Marisol Juan Borrás en el marco de PAID10-17 (Ayuda para la contratación de acceso al Sistema Español de Ciencia, Tecnología e Innovación en Estructuras de Investigación). También agradecer a la Generalitat Valenciana por el proyecto AICO/2015/104 (Desarrollo de una metodología basada en el análisis de ADN, para la detección de adulteraciones en miel; Prueba de concepto aplicada a la adición de jarabes de maíz) y a la Agencia estatal de Investigación por el proyecto AGL2016-77702-R (Diseño de un biosensor de ADN basado en tecnología HFFQCM para la detección de sustancias adulterantes en miel).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High Fundamental Frequency (HFF) Monolithic Quartz Crystal Microbalance with Dissipation Array for the Simultaneous Detection of Pesticides and Antibiotics in Complex Food

  • Calero-Alcarria, María Del Señor
  • García, María
  • Montoya, Ángel
  • FERNÁNDEZ DÍAZ, ROMÁN|||0000-0002-8883-4653
  • Juan-Borras, María del Sol|||0000-0003-4774-9484
  • Escriche Roberto, Mª Isabel|||0000-0003-0180-0360
  • Arnau Vives, Antonio|||0000-0002-5709-1690
  • Jiménez Jiménez, Yolanda|||0000-0003-4835-9007
[EN] As in the case of the food industry in general, there is a global concern about safety and quality in complex food matrices, such as honey, which is driving the demand for fast, sensitive and affordable analytical techniques across the honey-packaging industry. Although excellent techniques such as liquid chromatography-tandem mass spectrometry (LC-MS/MS) are available, these are located in centralized laboratories and are still lacking in speed, simplicity and cost-effectiveness. Here, a new approach is presented where a competitive immunoassay is combined with a novel High Fundamental Frequency Quartz Crystal Microbalance with Dissipation (HFF-QCMD) array biosensor for the simultaneous detection of antibiotics and pesticides in honey. Concretely, thiabendazole and sulfathiazole residues were monitored in spiked honey samples. Results revealed that HFF-QCMD arrays provide a complementary and reliable tool to LC-MS/MS for the analysis of contaminants in these kinds of complex matrices, while avoiding elaborate sample pre-treatment. The good sensitivity achieved (I50 values in the 70¿720 µg/kg range) and the short analysis time (60 min for 24 individual assays), together with the ability for multiple analyte detection (24 sensor array) and its cost-effectiveness, pave the way for the implementation of a fast on-line, in situ routine control of potentially hazardous chemical residues in honey., This work was supported by Ministerio de Economía, Industria y Competitividad de España-Agencia Estatal de Investigación with FEDER (Fondo Europeo de Desarrollo Regional) funds under Grants AGL2016-77702-R and AGL2013-48646-R. M. Calero is the recipient of the doctoral fellowship BES-2017-080246 from the Ministerio de Economía, Industria y Competitividad de España.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Multichannel Microfluidic Sensing Cartridge for Bioanalytical Applications of Monolithic Quartz Crystal Microbalance

  • Calero-Alcarria, María Del Señor
  • GARCIA MOLLA, PABLO
  • García, María
  • Gamero-Sandemetrio, Esther
  • Reviakine, Ilya
  • FERNÁNDEZ DÍAZ, ROMÁN|||0000-0002-8883-4653
  • García Narbón, José Vicente|||0000-0001-6303-8258
  • Arnau Vives, Antonio|||0000-0002-5709-1690
  • Jiménez Jiménez, Yolanda|||0000-0003-4835-9007
[EN] Integrating acoustic wave sensors into lab-on-a-chip (LoC) devices is a well-known challenge. We address this challenge by designing a microfluidic device housing a monolithic array of 24 high-fundamental frequency quartz crystal microbalance with dissipation (HFF-QCMD) sensors. The device features six 6-µL channels of four sensors each for low-volume parallel measurements, a sealing mechanism that provides appropriate pressure control while assuring liquid confinement and maintaining good stability, and provides a mechanical, electrical, and thermal interface with the characterization electronics. We validate the device by measuring the response of the HFF-QCMD sensors to the air-to-liquid transition, for which the robust Kanazawa¿Gordon¿Mason theory exists, and then by studying the adsorption of model bioanalytes (neutravidin and biotinylated albumin). With these experiments, we show how the effects of the protein¿surface interactions propagate within adsorbed protein multilayers, offering essentially new insight into the design of affinity-based bioanalytical sensors, This work was supported in part by Ministerio de Economía, Industria y Competitividad de España Agencia Estatal de Investigación with FEDER (Fondo Europeo de Desarrollo Regional) funds under Project AGL2016-77702-R and in part by the European Commission Horizon 2020 Programme, Capturing non-Amplified Tumor Circulating DA with Ultrasound Hidrodynamics, under Grant H2020-FETOPEN-2016-2017/737212-CATCH-U-DNA. M. Calero is the recipient of the doctoral fellowship BES-2017-080246 from the Ministerio de Economía, Industria y Competitividad de España.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Development of a novel high resolution and high throughput biosensing technology based on a Monolithic High Fundamental Frequency Quartz Crystal Microbalance (MHFF-QCM). Validation in food control

  • Calero Alcarria, María del Señor
[ES] La sociedad actual demanda un mayor control en la seguridad y calidad de los alimentos que se consumen. Esta preocupación se ve reflejada en los diferentes planes estatales y europeos de investigación científica, los cuales, plantean la necesidad de innovar y desarrollar nuevas técnicas analíticas que cubran los requerimientos actuales. En el presente documento se aborda el problema de la presencia de residuos químicos en la miel. El origen de los mismos se debe, fundamentalmente, a los tramientos veterinarios con los que se tratan enfermedades y parásitos en las abejas, y a los tratamientos agrícolas con los que las abejas se ponen en contacto cuando recolectan el néctar en cultivos próximos a las colmenas. La Agencia Europea de Seguridad Alimentaria (EFSA) confirma esta realidad al notificar numerosas alertas sanitarias en la miel. En los últimos años, los métodos de análisis basados en inmunosensores piezoeléctricos se han posicionado como la base de una técnica de cribado muy prometedora, la cual puede ser empleada como técnica complementaria a las clásicas de cromatografía, gracias a su sencillez, rapidez y bajo coste. La tecnología de resonadores High-Fundamental Frequency Quartz Crystal Microbalance with Dissipation (HFF-QCMD) combina la detección directa en tiempo real, alta sensibilidad y selectividad con un fácil manejo y coste reducido en comparación con otras técnicas. Además, está tecnología permite aumentar el rendimiento del análisis mediante el diseño de arrays de resonadores en un mismo sustrato (Monolithic HFF-QCMD). En este documento se presenta el diseño de un array de 24 sensores HFF-QCMD, junto con un cartucho de micro-fluídica que traza diversos microcanales sobre los diferentes elementos sensores, a los que hace llegar la muestra de miel diluida a analizar. El cartucho actúa también como interfaz para realizar la conexión entre el array de resonadores y el instrumento de caracterización de los mismos. Para obtener el máximo partido del array diseñado, se desarrolla un método de medida robusto y fiable que permite elevar la tasa de adquisición de datos para facilitar la toma de registros eléctricos de un elevado número de resonadores de forma simultánea, e incluso en varios armónicos del modo fundamental de resonancia. La gran sensibilidad de la tecnología HFF-QCMD a los eventos bioquímicos a caracterizar se extiende también a otro tipo eventos externos, como son los cambios de temperatura o presión, lo que es necesario minimizar con el fin de reducir el impacto que estas perturbaciones no deseadas provocan en la estabilidad y fiabilidad de la medida. Con este fin, se desarrolla un algoritmo de procesado de señal basado en la Discrete Transform Wavelet (DTW). Finalmente, todos los desarrollos tecnológicos realizados se validan mediante la implementación de un inmunoensayo para la detección simultánea, en muestras de mieles reales, de residuos químicos de naturaleza química muy diferente, a saber, el fungicida tiabendazol y el antibiótico sulfatiazol., [CA] La societat actual demanda un major control en la seguretat i qualitat dels aliments que es consumeixen. Aquesta preocupació es veu reflectida en els diferents plans estatals i europeus d'investigació científica, els quals, plantegen la necessitat d'innovar i desenvolupar noves tècniques analítiques que cobrisquen els requeriments actuals. En el present document s'aborda el problema de la presència de residus químics en la mel. L'origen dels mateixos es deu, fonamentalment, als tractaments veterinaris amb els quals es tracten malalties i paràsits en les abelles, i als tractaments agrícoles amb els quals les abelles es posen en contacte quan recol·lecten el nèctar en cultius pròxims als ruscos. L'Agència Europea de Seguretat Alimentària (EFSA) confirma aquesta realitat notificant nombroses alertes sanitàries en la mel. En els últims anys, els mètodes d'anàlisis basades en immunosensors piezoelèctrics s'han posicionat com la base d'una tècnica de garbellat molt prometedora, la qual pot ser emprada com a tècnica complementària a les clàssiques de cromatografia, gràcies a la seua senzillesa, rapidesa i baix cost. La tecnologia de ressonadors High-Fundamental Frequency Quartz Crystal Microbalance with Dissipation (HFF-QCMD) combina la detecció directa en temps real, alta sensibilitat i selectivitat amb un fàcil maneig i cost reduït en comparació amb altres tècniques. A més, està tecnologia permet augmentar el rendiment del anàlisi mitjançant el disseny d'arrays de ressonadors en un mateix substrat (Monolithic HFF-QCMD). En aquest document es presenta el disseny d'un array de 24 sensors HFF-QCMD, juntament amb un cartutx de microfluídica que estableix diversos microcanals sobre els diferents elements sensors, als quals fa arribar la mostra de mel diluïda a analitzar. El cartutx actua també com a interfície per a realitzar la connexió entre l'array de ressonadors i l'instrument de caracterització d'aquests. Per a traure el màxim partit a l'array dissenyat, es desenvolupa un mètode de mesura robust i fiable que permet elevar la taxa d'adquisició de dades per a facilitar la presa de registres elèctrics d'un elevat nombre de ressonadors de manera simultània, i fins i tot en diversos harmònics del mode fonamental de ressonància. La gran sensibilitat de la tecnologia HFF-QCMD als esdeveniments bioquímics a caracteritzar s'estén també a un altre tipus esdeveniments externs, com són els canvis de temperatura o pressió, la qual cosa és necessari minimitzar amb la finalitat de reduir l'impacte que aquestes pertorbacions no desitjades provoquen en l'estabilitat i fiabilitat de la mesura. A aquest efecte, es desenvolupa un algorisme de processament de senyal basat en la Discrete Transform Wavelet (DTW). Finalment, tots els desenvolupaments tecnològics realitzats es validen mitjançant la implementació d'un immunoassaig per a la detecció simultània, en mostres de mel reals, de residus químics de naturalesa química molt diferent, a saber, el fungicida tiabendazol i l'antibiòtic sulfatiazol., [EN] Currently, society demands greater control over the safety and quality of the food consumed. This concern is reflected in the different states and European plans for scientific research, which establish the necessity to innovate and develop new analytical techniques that meet current requirements. This document addresses the problem of the presence of chemical residues in honey. Its origin is fundamentally due to the veterinary treatments against diseases and parasites in bees, and also to the agricultural treatments with which the bees come into contact when they collect the nectar in crops close to the hives. The European Food Safety Agency (EFSA) confirms this reality by notifying numerous health alerts in honey. In recent years, analysis methods based on piezoelectric immunosensors have been positioned as the basis of a very promising screening technique, which can be used as a complementary technique to the classic chromatography, thanks to its simplicity, speed and low cost. High-Fundamental Frequency Quartz Crystal Microbalance with Dissipation (HFF-QCMD) resonator technology combines direct real-time detection, high sensitivity and selectivity with easy handling and low cost compared to other techniques. In addition, this technology allows increasing the performance of the analysis through the design of resonator arrays on the same substrate (Monolithic HFF-QCMD). This document presents the design of an array of 24 HFF-QCMD sensors, together with a microfluidic cartridge that establish various microchannels on the different sensor elements, to provide them the diluted honey sample to be analyzed. The cartridge also acts as an interface to make the connection between the array of resonators and the characterization instrument. To get the most out of the designed array, a robust and reliable measurement method has been developed that allows increasing the data acquisition rate to facilitate electrical parameters readout from a high number of resonators simultaneously, and even in several harmonics of the fundamental resonance mode. The great sensitivity of the HFF-QCMD technology to the biochemical events to be characterized also is extended to other types of external events, such as changes in temperature or pressure, which must be minimized in order to reduce the impact that these unwanted disturbances cause in the stability and reliability of the measurement. To this end, a signal processing algorithm based on the Discrete Transform Wavelet (DTW) is developed. Finally, all the technological developments carried out are validated through the implementation of an immunoassay for the simultaneous detection, in real honey samples, of chemical residues of very different chemical nature, namely, the fungicide thiabendazole and the antibiotic sulfathiazole., The authors would also like to thank Jorge Martínez from the Laboratory of High Frequency Circuits (LCAF) of the Universitat Politècnica de València (UPV) for assistance with profilometry, and Manuel Planes, José Luis Moya, Mercedes Tabernero, Alicia Nuez and Joaquin Fayos from the Electron Microscopy Services of the UPV for helping with the AFM, and SEM measurements. M.Calero is the recipient of the doctoral fellowship BES-2017-080246 from the Spanish Ministry of Economy, Industry and Competitiveness (Madrid, Spain). This research was funded by Spanish Ministry of Economy and Competitiveness with FEDER funds (AGL 2016-77702-R) and European Commission Horizon 2020 Programme (Grant Agreement number H2020-FETOPEN-2016-2017/737212-CATCH-U-DNA - Capturing non-Amplified Tumor Circulating DNA with Ultrasound Hydrodynamics) for which the authors are grateful. Román Fernández is with the Center for Research and Innovation in Bioengineering (Ci2B), Universitat Politècnica de València, València, Spain and with Advanced Wave Sensors S.L., Paterna, València, Spain. (e-mail: rfernandez@awsensors.com); Yolanda Jiménez, Antonio Arnau and María Calero are with the Center for Research and Innovation in Bioengineering (Ci2B), Universitat Politècnica de València, València, Spain; Ilya Reiviakine is with Advanced Wave Sensors S.L., Paterna, Valencia, Spain and with the Department of Bioengineering, University of Washington, Seattle, WA, 98150 USA; María Isabel Rocha-Gaso and José Vicente García are with Advanced Wave Sensors S.L., Paterna, València, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High Fundamental Frequency (HFF) Monolithic Resonator Arrays for Biosensing Applications: Design, Simulations, Experimental, Characterization

  • FERNÁNDEZ DÍAZ, ROMÁN|||0000-0002-8883-4653
  • García Narbón, José Vicente|||0000-0001-6303-8258
  • ROCHA GASO, MARÍA ISABEL|||0000-0003-2949-4457
  • Arnau Vives, Antonio|||0000-0002-5709-1690
  • Jiménez Jiménez, Yolanda|||0000-0003-4835-9007
  • Calero-Alcarria, María Del Señor
  • Reviakine, Ilya
[EN] Miniaturized, high-throughput, cost-effective sensing devices are needed to advance lab-on-a-chip technologies for healthcare, security, environmental monitoring, food safety, and research applications. Quartz crystal microbalance with dissipation (QCMD) is a promising technology for the design of such sensing devices, but its applications have been limited, until now, by low throughput and significant costs. In this work, we present the design and characterization of 24-element monolithic QCMD arrays for high-throughput and low-volume sensing applications in liquid. Physical properties such as geometry and roughness, and electrical properties such as resonance frequency, quality factor, spurious mode suppression, and interactions between array elements (crosstalk), are investigated in detail. In particular, we show that the scattering parameter, S 21 , commonly measured experimentally to investigate crosstalk, contains contributions from the parasitic grounding effects associated with the acquisition circuitry. Finite element method simulations do not take grounding effects into account explicitly. However, these effects can be effectively modelled with appropriate equivalent circuit models, providing clear physical interpretation of the different contributions. We show that our array design avoids unwanted interactions between elements and discuss in detail aspects of measuring these interactions that are often-overlooked., The authors would also like to thank Jorge Martínez from the Laboratory of High Frequency Circuits (LCAF) of the Universitat Politècnica de València (UPV) for assistance with profilometry, and Manuel Planes, José Luis Moya, Mercedes Tabernero, Alicia Nuez, and Joaquin Fayos from the Electron Microscopy Services of the UPV for helping with the AFM, and SEM measurements. M. Calero is the recipient of the doctoral fellowship BES-2017-080246 from the Spanish Ministry of Economy, Industry and Competitiveness, Madrid, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Detection of honey adulteration by conventional and real-time PCR

  • Sobrino-Gregorio, Lara
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Escriche Roberto, Mª Isabel|||0000-0003-0180-0360
[EN] This work applies both conventional and real-time PCR DNA amplification techniques for detecting and quantifying rice molasses in honey. Different levels of adulteration were simulated (1, 2, 5, 10, 20, 50%) using commercial rice molasses. Among the different specific genes of rice tested by PCR, the PLD1 primer was the most effective. This allowed the visualization in agarose gel of this type of adulterant up to 5-20%. Moreover, by means of real-time PCR it was possible to distinguish the different levels of rice DNA, and therefore the percentage of adulteration (1-50%). A standard curve built with the DNA serial dilutions of rice genomic DNA concentrations showed that the quantification level was between 2-5%. These results offer compelling evidence that DNA techniques could be useful not only for the detection of adulterations of honey with rice molasses but also for the quantification of levels lower than those of conventional techniques., This study is part of part of the projects funded by the "Agencia Estatal de Investigacion" (AGL2016-77702-R) and by the "Generalitat Valenciana" (AICO/2015/104) of Spain, for which the authors are grateful.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Using an automatic pulse voltammetric electronic tongue to verify the origin of honey from Spain, Honduras, and Mozambique

  • Sobrino-Gregorio, Lara
  • Tanleque-Alberto, Fernando
  • Bataller Prats, Román
  • Soto Camino, Juan
  • Escriche Roberto, Mª Isabel|||0000-0003-0180-0360
[EN] BACKGROUND: The growing need to classify the origin of honey in a simple way is leading to the development of affordable analytical equipment that is in-line and manageable, enabling rapid on-site screening. The aim of this work was therefore to evaluate whether an electronic tongue (made of four metallic electrodes: Ir, Rh, Pt, Au), based on potential multistep pulse voltammetry with electrochemical polishing, is able to differentiate between honey samples from Spain, Honduras, and Mozambique. RESULTS: It was demonstrated, for the first time, that automatic pulse voltammetry, in combination with principal component analysis (PCA) statistical analysis, was able to differentiate honey samples from these three countries. A partial least squares (PLS) analysis predicted the level of certain physicochemical parameters, the best results being for conductivity and moisture with correlation coefficients of 0.948 and 0.879, whereas the weakest correlation was for the sugars. CONCLUSION: The tool proposed in this study could be applied to identify the country origin of the three types of multifloral honey considered here. It also offers promising perspectives for expanding knowledge of the provenance of honey. All of this could be achieved when a comprehensive database with the information generated by this electronic tongue has been created. © 2019 Society of Chemical Industry, This study forms part of the projects funded by the Ministerio de Economía y Competitividad, the Agencia Estatal de Investigación, and the Fondo Europeo de Desarrollo Regional (AGL2016-77702-R) and by the Programa ADSIDEO-cooperación 2016 of the Centro de Cooperación al Desarrollo de la Universitat Politècnica de València, Spain, for which the authors are grateful.