Skip to main content

OPTIMIZACION DEL USO DEL AGUA Y DE LA ENERGIA Y CONTROL DEL MEJILLON CEBRA EN SISTEMAS DE RIEGO PRESURIZADO POR ASPERSION

AGL2017-89407-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication

Characterization and Simulation of a Low-Pressure Rotator Spray Plate Sprinkler Used in Center Pivot Irrigation Systems

  • Robles Rovelo, Octavio
  • Zapata Ruiz, Nery
  • Burguete Tolosa, Javier
  • Félix Félix, Jesús Ramiro
  • Latorre Garcés, Borja
Spray sprinklers enable to operate at low pressures (<103 kPa) in self-propelled irrigation machines. A number of experiments were performed to characterize the water distribution pattern of an isolated rotator spray plate sprinkler operating at very low pressure under different experimental conditions. The experiments were performed under two pressures (69 kPa and 103 kPa) and in calm and windy conditions. The energy losses due to the impact of the out-going jet with the sprinkler plate were measured using an optical technique. The adequacy to reproduce the measured water distribution pattern under calm conditions of two drop size distribution models was evaluated. A ballistic model was used to simulate the water distribution pattern under wind conditions evaluating three different drag models: (1) considering solid spherical drops; (2) a conventional model based on wind velocity and direction distortion pattern, and (3) a new drag coefficient model independent of wind speed. The energy losses measured with the optical method range from 20% to 60% from higher to lower nozzle sizes, respectively, for both evaluated working pressures analyzing over 16,500 droplets. For the drop size distribution selected, Weibull accurately reproduced the water application with a maximum root mean square error (RMSE) of 19%. Up to 28% of the RMSE could be decreased using the wind-independent drag coefficient model with respect to the conventional model; the difference with respect to the spherical model was 4%., This research was funded by MICINN of the Government of Spain through the grants AGL2013-48728-C2-1-R and AGL2017-89407-R. Octavio Robles received a scholarship granted by the Minister of Economy and Competitiveness of the Spanish Government.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Self-calibrated ballistic model for sprinkler irrigation with a field experiments data base

  • Robles Rovelo, Octavio
  • Latorre Garcés, Borja
  • Zapata Ruiz, Nery
  • Burguete Tolosa, Javier
56 Pags.- 5 Tabls.- 8 Figs. The definitive version is available at: https://www.sciencedirect.com/science/journal/03783774, Simulation models of sprinkler irrigation are a valuable tool to improve the irrigation water management at plot scale. Ballistic theory has been commonly used to simulate drop dynamics in sprinkler irrigation models. A number of experiments on sprinkler irrigation performed in previous studies in the Ebro Valley Spain were analyzed and integrated in a data base. The evaluations were performed on six sprinkler types with different nozzle sizes, operating pressures under different meteorological conditions and spacings. The data base includes 40 isolated and 167 solid-set experiments that were processed with a self-calibrated model to calibrate and validate the ballistic parameters. The ballistic model used in this research was improved with respect to a previous model, moreover some novelties were added. These modifications were done in the phases of: the numerical solution, a wind drift and evaporation losses model, simulations considering slope in the terrain, drop generation (using regular and random methods), the size of the terrain cells where the drops are simulated and considering two drop size distributions, upper limit lognormal and Weibull. The results indicated larger and significant differences of Christiansen´s Uniformity Coefficient measured and simulated when considering a constant wind velocity (9%) and no differences when the wind velocity is defined for intervals equal to or less than 30 min (6%). Regarding the effect of the slope in the terrain, differences between both uniformity coefficients are relevant (11%) when the wind velocity is larger than 4 m s−1. Both drop size distributions were similar in accuracy however, the upper limit lognormal was more suitable to simulate a sprinkler especially designed to operate under low pressure. The predictive ability of the model once calibrated and validated was satisfactory (99% and 75%, respectively). The new model improves the accuracy with respect to previous research and minimizes the computing time for the calibration and validation processes using the cluster Trueno-CSIC., This research was funded by MICINN of the Government of Spain through grant AGL2013-48728-C2-1-R and AGL2017-89407-R. Octavio Robles received a scholarship granted by the Minister of Economy and Competitiveness of the Spanish Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of a growing maize canopy on solid-set sprinkler irrigation: kinetic energy dissipation and water partitioning

  • Zapata Ruiz, Nery
  • Salvador Esteban, Raquel
  • Latorre Garcés, Borja
  • Paniagua Antón, Pilar
  • Medina Pueyo, Eva Teresa
  • Playán Jubillar, Enrique
48 Pags./ 3 Tabls./ 10 Figs. The definitive version is available at https://link.springer.com/journal/271, The energy of sprinkler irrigation drops splashing on the soil surface or the crop canopy depends on their size and velocity. The kinetic energy of sprinkler irrigation drops is a major factor degrading the soil surface. The effect of a growing maize canopy on sprinkler drop energy dissipation and water partitioning was analyzed. A field experiment was performed on a solid-set sprinkler irrigated plot cropped with maize. Measurements were performed at different locations and heights into the sprinkler layout. Tests were performed at five maize heights. At each maize height, drop population characteristics and pluviometry were measured above and below the maize canopy. Drop population was measured with an optical disdrometer. Catch-can devices were used to measure pluviometry. Solid-set sprinkler irrigation distributes water quite homogeneously, but drop characteristics largely differ between layout locations. The effect of the crop on drop characteristics intensified as the canopy height increased. The canopy cover reduced drop diameter more than it reduced drop velocity. As the canopy grew, its capacity to intercept and derive irrigation water to stemflow increased. The largest part of energy dissipation by the maize canopy took place in the top 1.5 m. A fully developed maize canopy reduced the drop kinetic energy reaching the soil to 13.6% of that reaching bare soil. As a management practice, in sensitive soils or in sprinkler systems applying water with high specific kinetic power, irrigation of bare soils should be avoided., State Research Agency of the Government of Spain (Agencia Estatal de Investigación) through grant AGL2017-89407-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Normalized pressure: a key variable to assess zebra mussel infestation in pressurized irrigation networks

  • Morales-Hernández, Mario
  • Playán Jubillar, Enrique
  • Latorre Garcés, Borja
  • Montoya Sevilla, Francisco
  • Madurga, Cristina
  • Sánchez de Rivera, Alejandro
  • Zapata Ruiz, Nery
45 Pags.- 12 Figs.- 4 Tabls. The definitive version is available at: https://www.sciencedirect.com/science/journal/03783774, he impact of zebra mussel (Dreissena polymorpha) colonization on pressurized irrigation systems is becoming important in many areas of the world. If the infestation is not controlled, the conveyance capacity of the network reduces and mussels can completely block the system, preventing irrigation. A methodology to assess zebra mussel infestation in collective pressurized networks based on monitorization and hydraulic simulation is developed in this research. Normalized pressure, defined as the difference between simulated and measured pressure, is an indicator of the presence of zebra mussels (Morales-Hernández et al., 2018). When this variable is combined with the distributed discharge of the irrigation network, it is possible to use an optimization procedure to produce a roughness map of network pipelines. Roughness in excess of that characteristic of the pipeline material can be directly associated zebra mussel infestation. Different objective functions, optimization algorithms and strategies are proposed in this work, with the aim of attaining constant discharge-independent normalized pressure at each observation point in the network. Roughness values under different pipe conditions, reproducing levels of zebra mussel infestation, were experimentally obtained at a reference laboratory. The limitations and uncertainties of the proposed methodology are discussed. Normalized pressure was validated in an irrigation network belonging to a water users association, using continuous data recorded at different observation points during a complete irrigation campaign. The non-invasive hydraulic method has been designed to identify infested areas in real time and to optimize the chemical treatments controlling mussel development, This work was supported by the State Agency of Research of the Government of Spain (Agencia Estatal de Investigación) through grant AGL2017-89407-R and by the European Agricultural Fund for Rural Development (EAFRD) and the Government of Aragón. Both institutions funded the IRRIZEB II (Programa integral para el control y mitigación del impacto de la plaga de Mejillón Cebra en sistemas de regadío II) grant of the Plan de Desarrollo Rural (PDR)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A simulation tool to optimize the management of modernized infrastructures in collective and on-farm irrigation systems

  • Zapata Ruiz, Nery
  • Bahddou, Sophia
  • Latorre Garcés, Borja
  • Playán Jubillar, Enrique
9 Pags.- 11 Figs.- 4 Tabls. Data availability: Data will be made available on request. © 2023 The Author(s). Published by Elsevier B. V. This is an open access article under the CC BY-NC-ND license., Irrigated areas face new, pressing challenges due to escalating energy costs for pumping, increasing cost of seeds, fertilizers and agrochemicals, volatility of agricultural commodities, pressure of environmental regulations, water scarcity and mounting cost of irrigation infrastructure investments. At the same time, from the technical standpoint, farmers can chose from a wide array of irrigation design and operation alternatives for collective and on-farm systems, with variable effects on crop yield and profitability. These factors are often subjected to quick changes, complicating decision making. Simulation models have proven useful to support decision making in irrigation infrastructure, water / energy use, crop agronomy and soil management. In this research, new capacities of the Ador-Simulation software are reported, targeting comprehensive analyses of irrigation modernization. The model implements additional on-farm irrigation methods (low-pressure solid-set, center-pivot and drip irrigation); crop intensification (double cropping in the same season); and crop response to different on-farm irrigation management options (timing and frequency). Model performance was verified using a set of theoretical case studies. Finally, the model was applied to the optimization of irrigation design and management (water and energy) in the Bardenas XI project of northeastern Spain. Water application in center-pivot and drip irrigation were simulated using a normal distribution characterized by a user-defined Distribution Uniformity. In center-pivot, the application depth was randomized in every irrigation event, reproducing the random nature of wind disturbances. In drip irrigation, the application depth followed the same random distribution in all irrigation events, reproducing the deterministic effect of manufacturing and hydraulic variability. According to the literature, the effect of irrigation timing was treated differently for two key sprinkler irrigated crops: corn and alfalfa. Differences in water application and crop yield between on-farm methods resulted in different gross and net income. In the Bardenas XI project, irrigation performance indicators showed different patterns of inter-annual variability. Deep percolation was strongly affected by the amount of seasonal precipitation and by Distribution Uniformity. Indicators at the plot level were strongly determined by the on-farm irrigation method, the soil type, and the crop. In the conditions of Bardenas XI, the design option without pumping station was the most adequate. Natural pressure proved sufficient for a combination of low-pressure sprinkler irrigation, pivot and drip irrigation methods, distributed throughout the irrigated area. Escalating energy costs emphasize the need for careful assessment of pumping requirements at the design phase of irrigation projects., This work was supported by the State Research Agency of the Government of Spain (Agencia Estatal de Investigación, Gobierno de España) through grants AGL2017–89407-R and PID2021–124095OB-I00. The International Center for Advanced Mediterranean Agronomic Studies of Zaragoza (CIHEAM-Zaragoza) provided a M. Sc. scholarship to Ms. Sophia Bahddou., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sprinkler irrigation machines: effect of a growing maize canopy on water partitioning, drop characteristics, and energy dissipation

  • Salvador Esteban, Raquel
  • Playán Jubillar, Enrique
  • Guillén, Mónica
  • Paniagua Antón, Pilar
  • Zapata Ruiz, Nery
37 Pags.- 9 Figs.- 4 Tabls. All the data presented in the manuscript have been obtained from authors’ experiments. © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2023, The self-propelled sprinkler irrigation machine is an extended irrigation system that has reduced its energy dependency in the last twenty years by replacing impact sprinklers with low-pressure emitters. The reduction in pressure operation changes the characteristics of the drop population and its impact on the soil. The crop canopy can also modify the energy reaching the soil. This study aims to contribute to the understanding of water partitioning, drop characteristics and energy impacting the soil in a growing maize canopy irrigated with a sprinkler machine. The results may provide valuable insights for optimizing irrigation practices and managing potential soil erosion risks in sprinkler irrigated maize felds. Measurements were performed in a feld experiment, above and below the canopy at diferent maize heights. All measurements were taken at two points with two nozzle sizes (4.58 and 6.75 mm). Water partitioning and drop characteristics change as the canopy grows. The amount of throughfall decreases as the maize grows. An increase in the proportion of the smallest (<1 mm) and largest (3–4 mm) drop diameters was measured as one moved deeper into the canopy. For a completely developed canopy, a reduction in specifc power reaching the soil was observed for the 6.75 mm nozzle, but both a decrease and an increase were measured for the 4.58 mm nozzle, depending on the measurement location. The highest percentage of stem fow associated with the largest nozzle resulted in a greater protective efect of the canopy compared to the smallest nozzle. The balance between throughfall reduction, dripping, and splashing determines the ability of the canopy to mitigate soil impact energy. This study advances previous works on sprinkler irrigation by adding the variation of drop population characteristics not only as a function of canopy height but also as a function of irrigation time. In addition, this study incorporates the characterization of water application with irrigation machine emitters, which produce diferent drop populations than sprinkler solid-sets, allowing for a comparison between both systems., State Research Agency of the Government of Spain (Agencia Estatal de Investigación) through grant AGL2017-89407-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ador-Solid-Set: A coupled simulation model for commercial solid-set irrigated fields

  • Playán Jubillar, Enrique
  • Zapata Ruiz, Nery
  • Latorre Garcés, Borja
  • Cavero Campo, José
  • Paniagua Antón, Pilar
  • Medina Pueyo, Eva Teresa
  • Lorenzo, María Ángeles
  • Burguete Tolosa, Javier
14 Pags.- 11 Figs.- 8 Tabls. Data Availability: Data will be made available on request., The last five decades have seen strong developments in irrigation modeling. In solid-set sprinkler irrigation, models have generally been applied to a few sprinklers in a regular arrangement, making them representative of a sector or a field. In this research, the Ador-Solid-Set model for whole-field solid-set sprinkler irrigation is presented, validated and applied to simulate an irrigation event in two fields: CA (10.2 ha) and ZA (24.5 ha), equipped with 12 and 26 sectors, respectively. The model couples pipeline hydraulics (EPANET), sprinkler ballistics and irrigation scheduling at execution time. Field experiments were used to validate the ballistic model in a solid-set combining full- and partial-circle sprinklers. Observed and simulated irrigation depths and coefficients of uniformity showed determination coefficients of 0.73*** and 0.89***, respectively. Optimization was used to estimate pipeline roughness based on pairs of pressure measurements (at the inlet and specific sprinklers): 26 pairs in CA and 58 pairs in ZA. Roughness parameters were estimated for the main pipeline, each sector and the sprinkler risers: 14 parameters in CA and 28 in ZA. More than a million hydraulic simulations were required to estimate roughness in each field. Maps were produced for applied water in CA and ZA following a sequential irrigation of their sectors lasting for 24 hours. The model produced whole-field coefficients of uniformity of 80.2 in CA and 80.9 in ZA. Finally, Ador-Solid-Set quantified the volume of drift outside the field (2.4 and 1.5% of the applied water in CA and ZA, respectively). This additional drift can be added to the wind drift and evaporation losses obtained from empirical equations, in a process that requires further analysis. Research efforts are also needed to enhance the current model capabilities and address the challenges related to water quantity and quality in sprinkler solid-sets., This research was funded through grants AGL2017–89407-R and PID2021–124095OB-I00 by MCIN/AEI/10.13039/501100011033 and by ERDF, a way of making Europe., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Characterization and simulation of a low-pressure rotator spray plate sprinkler used in center pivot irrigation systems

  • Robles Rovelo, Cruz Octavio
  • Zapata Ruiz, Nery
  • Burguete Tolosa, Javier
  • Félix-Félix, Jesús Ramiro
  • Latorre, Borja
Spray sprinklers enable to operate at low pressures (<103 kPa) in self-propelled irrigation machines. A number of experiments were performed to characterize the water distribution pattern of an isolated rotator spray plate sprinkler operating at very low pressure under dierent experimental conditions. The experiments were performed under two pressures (69 kPa and 103 kPa) and in calm and windy conditions. The energy losses due to the impact of the out-going jet with the sprinkler plate were measured using an optical technique. The adequacy to reproduce the measured water distribution pattern under calm conditions of two drop size distribution models was evaluated. A ballistic model was used to simulate the water distribution pattern under wind conditions evaluating three different drag models: (1) considering solid spherical drops; (2) a conventional model based on wind velocity and direction distortion pattern, and (3) a new drag coeffcient model independent of wind speed. The energy losses measured with the optical method range from 20% to 60% from higher to lower nozzle sizes, respectively, for both evaluated working pressures analyzing over 16,500 droplets. For the drop size distribution selected, Weibull accurately reproduced the water application with a maximum root mean square error (RMSE) of 19%. Up to 28% of the RMSE could be decreased using the wind-independent drag coeffcient model with respect to the conventional model; the dierence with respect to the spherical model was 4%.