Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Moisture profiles in cheese drying determined by TD-NMR: Mathematical modeling of mass transfer

  • Castell Palou, A
  • Rossello, Carmen
  • Femenia, Antoni
  • Simal, S.
  • Bon Corbín, José|||0000-0002-0457-9705
[EN] A time-domain nuclear magnetic resonance (TD-NMR) method is proposed to quick and easily determine moisture profiles during cheese drying. The method consists of a combined relaxation analysis, where the magnetization at a certain time is determined by both the longitudinal and the transverse NMR relaxation processes. The drying experiments were carried out at 16 °C and 0.2-0.5 m/s for 32 days, and allowing only one-direction mass transfer. A diffusion model was formulated taking into account the external resistance to mass transfer. Both effective moisture diffusivity and external mass transfer coefficient were simultaneously identified (3.71 × 10 -11 m 2/s and 2.95 × 10 -8 m/s, respectively). The proposed model allowed a satisfactory simulation of both the drying curve (mean relative error (MRE) = 0.4% and percentage of explained variance (%var) = 99.7%) and the moisture profiles (average MRE = 4.4% and %var = 94.5%). © 2011 Elsevier Ltd. All rights reserved., The authors would like to acknowledge the financial support provided by the Government of Spain through the MEC (AP-2005-4847) and the MECI (AGL2006-14146-C02-02).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mathematical Modelling of Moisture Distribution and Kinetics in Cheese Drying

  • Castell Palou, A.
  • Vaquiro, Henry A.
  • Rosselló, Carmen
  • Femenia, Antoni
  • Simal, S.
  • Carcel, J. A.|||0000-0002-3796-6146
[EN] In the cheese industry, the longest phase in the manufacture of cheese is ripening, during which a considerable loss of water occurs. An understanding of the mass transfer mechanisms of drying would thus contribute to improving engineering design and the quality of the final product. In this work, a mathematical model for a cubic shape was proposed to predict the drying kinetics and moisture distribution during cheese drying. The model was developed taking into consideration both the external and internal resistances to mass transfer and an effective diffusion dependent on local moisture and temperature. Furthermore, a specific model for sorption isotherms was established from experimental results and used to complete the overall model formulation. The drying experiments were carried out at 6.3, 12.2, and 18.2 C and 1.0ms 1 until a moisture content of approximately 0.30 kg kg 1 (db) was reached. Moisture distribution was experimentally measured from the center of the cheese cube to the center of the surfaces and to the vertexes using a time-domain nuclear magnetic resonance (TD-NMR) method. The proposed model was solved using a finite element method and validated by comparing the experimental moisture profiles with those simulated by the model. A satisfactory simulation was obtained for both the drying curves and the moisture profiles. For both groups of data, a mean relative error lower than 6% and a percentage of explained variation higher than 97% was achieved., The authors acknowledge financial support provided by the "Visiting Lecturers on the Short Visits" program of the University of the Balearic Islands, the Balearic government and European Regional Development Fund (57/2011), and the Spanish government through the Ministerio de Educacion y Ciencia (AP-2005-4847) and the Ministerio de Ciencia e Innovacion (DPI2009 1449C04-02).