Skip to main content

ESTUDIO DE LOS EFECTOS DE LOS ULTRASONIDOS DE POTENCIA EN PROCESOS DE TRANSFERENCIA DE MATERIA. MEJORA DE LA LIOFILIZACION A PRESION ATMOSFERICA

BES-2010-033460

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Formación de Recursos Humanos de Investigación
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Contratos Predoctorales
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Formación e Incorporación de Investigadores
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of air velocity and temperature on ultrasonically assisted low temperature drying of eggplant

  • Santacatalina, J. V.
  • Soriano, J.R.
  • Carcel, J. A.|||0000-0002-3796-6146
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
[EN] The aim of this work was to evaluate the feasibility of power ultrasound (US) application during the low temperature drying (LTD) of eggplant, analyzing the influence of the process variables linked to the air flow (velocity and temperature) on the drying kinetics and different quality aspects of the dehydrated product. For that purpose, eggplant (Solanum melongena var. Black Enorma) cubes (8.6 mm side) were dried at different air velocities (1, 2, 4 and 6 m/s) and temperatures (10, 0 and −10 ◦C) without (AIR) and with (AIR + US) US application. The rise in the air velocity and temperature led to an increase in the drying rate in AIR experiments. US application accelerated the drying process under every experimental condition tested, shortening the drying time by up to 87%. As for the quality parameters, no remarkable influence of the process variables (US application, air velocity and temperature) on the rehydration, reconstitution in olive oil or hardness of the rehydrated product was observed., The authors acknowledge the financial support of the Spanish Ministerio de Economia y Competitividad (MINECO) and the European Regional Development Fund (ERDF) through project DPI2012-37466-CO3-03 and the FPI fellowship (BES-2010-033460) granted to J.V. Santacatalina and the Generalitat Valenciana through the project PROMETE0II/2014/005.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Model-based investigation into atmospheric freeze drying assisted by power ultrasound

  • Santacatalina Bonet, Juan Vicente
  • Fissore, D.
  • Carcel, J. A.|||0000-0002-3796-6146
  • Mulet Pons, Antonio|||0000-0001-6748-2663
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
Atmospheric freeze drying consists of a convective drying process using air at a temperature below the freezing point of the processed product, and with a very low relative humidity content. This paper focuses on the use of a simple one-dimensional model considering moving boundary vapor diffusion to describe the ultrasonic assisted atmospheric freeze-drying of foodstuffs. The case study is the drying of apple cubes (8.8 mm) at different air velocities (1, 2, 4 and 6 m/s), temperatures ( 5, 10 and 15 C), without and with (25, 50 and 75 W) power ultrasound application. By fitting the proposed diffusion model to the experimental drying kinetics, the effective diffusivity of water vapor in the dried product was estimated. The model was successfully validated by drying apple samples of different size and geometry (cubes and cylinders). Finally, a 23 factorial design of experiments revealed that the most relevant operating parameter affecting the drying time was the applied ultrasound power level., The authors acknowledge the financial support of the Spanish Ministerio de Economia y Competitividad (MINECO) and of the European Regional Development Fund (ERDF) through the project DPI2012-37466-CO3-03, the FPI fellowship (BES-2010-033460) and the EEBB-I-14-08572 fellowship granted to J.V. Santacatalina for a short stay at Politecnico di Torino.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ultrasonically assisted low-temperature drying of desalted codfish

  • Santacatalina Bonet, Juan Vicente
  • Guerrero, M.E
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
  • Mulet Pons, Antonio|||0000-0001-6748-2663
  • Carcel, J. A.|||0000-0002-3796-6146
[EN] Low-temperature drying (LTD) constitutes an interesting means of dehydrating foodstuffs, thus preserving the quality of the product. Power ultrasound (US) generates several mechanical effects that could help to shorten the long drying times associated with LTD. In this work, the feasibility of using US in LTD of desalted cod was assessed. For this purpose, desalted cod slices (50 30 5 mm) were dried (2 m/s) at different temperatures (10, 0 and 10 C) without (AIR) and with (AIR þ US, 20.5 kW/m3) US application. Afterwards, the dried samples were rehydrated in distilled water (25 C). A diffusion model was used to describe both drying and rehydration kinetics. The color and hardness of both dried and rehydrated cod samples were also measured. The application of US increased the drying rate at every temperature tested, shortening the drying time by 16% at 0 C and up to 60% at 10 C. The ultrasonically assisted dried samples presented a rehydration rate which was slightly lower than that of those that had been conventionally dried, but they were harder and whiter, which is more suited to consumer preferences. Therefore, power ultrasound could be considered an affordable technology with which to accelerate LTD of desalted cod, providing high quality dried products., The authors acknowledge the financial support of the Spanish Ministerio de Economia y Competitividad (MINECO) - European Regional Development Fund (ERDF) from the project DPI2012-37466-CO3-03 and the FPI fellowship (BES-2010-033460) granted to J.V. Santacatalina. They also wish to acknowledge Carmen Cambra S.L. for their technical support with the selection of the raw material.