Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Modeling of the Thermohydrodynamic and Reactive Behavior of Compacted Clay for High-Level Radionuclide Waste-Management Systems

  • Juncosa, Ricardo
  • Navarro Gamir, Vicente
  • Delgado Martín, Jordi
  • Vázquez-González, Ana
Versión aceptada de: https://doi.org/10.1346/CCMN.2010.0580404, [Abstract:] Bentonite is often proposed as an engineered-buffer material in high-level radionuclide waste-management systems. For effective design of the barrier that will provide protection over the long time periods required, the physical/thermal/chemical processes taking place in the barrier material must be understood thoroughly. These processes, which interact, include the flow of water and gas, the flow of heat, and the transport and reaction of chemical constituents. The purpose of this study was to better understand the processes that occurred in a small-scale experiment within a confined bentonite space. A conceptual and mathematical model (FADES-CHEM) was built in order to simulate the results of an experiment conducted in 2000, and thereby to gain a better understanding of the controlling processes. In that experiment, a block of compacted bentonite was placed in an air-tight cell and subjected, for 6 months, to simultaneous heating and hydration from opposite sides. The bentonite block was then sliced into five sections each of which was then analyzed in order to obtain a series of physicochemical parameters illustrating the changes that had occurred. Before modeling, the chemical composition of the bentonite pore waters was restored in order to account for different processes such as gas outgassing and cell cooling. Modeling indicated that gas-pressure build up was a relevant process when computing the saturation of bentonite, and the computations in the present study suggested that evaporation/condensation processes played a crucial role in the final distribution of the water content. Gas pressure and evaporation/ condensation also affected the geochemical system, and the numerical model developed gives results that were consistent with the experimental values and trends observed. The model reproduced the results obtained and enable use at the repository scale and over longer time frames, provided that adequate data are available., The thermohydraulic cells were designed, constructed, run, and characterized at the CIEMAT (Research Center Energy, Environmental and Technological, Spain) by staff of the Department of Environmental Impact of Energy, under the direction of A. M. Fernández and M. V. Villar, to whom the authors are greatly indebted. This contribution benefited from discussions held at the FEBEX Working Groups and was carried out within the framework of FEBEX (I&II) research projects, funded by ENRESA (national waste company in Spain) and the RADWAS Program (radioactive waste program) of the EU (FI4W-CT95-00008; FIKW-CT-2000-0016). Special thanks to Dr F.J. Samper for the discussions during the preliminary developments of this work. Funding by the Spanish Ministry of Science and Technology (BIA2005-07916-C01/2; J. Delgado and V. Navarro), the Galician Government (PGIDIT02PXIC16201PN; J. Delgado), and the European Regional Development Funds 2007/2013 are also acknowledged. Comments and suggestions by Dr Joseph W. Stucki and two anonymous reviewers are greatly appreciated., Xunta de Galicia; PGIDIT02PXIC16201PN
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Characterization and geochemical–geotechnical properties of granite sawdust produced by the dimension stone industry of O Porriño (Pontevedra, Spain)

  • Barrientos, Víctor
  • Delgado Martín, Jordi
  • Navarro Gamir, Vicente
  • Juncosa, Ricardo
  • Falcón-Suárez, Ismael Himar
  • Vázquez-González, Ana
Versión aceptada de: https://doi.org/10.1144/1470-9236/08-098, dispoñible en GeoScienceWorld e tamén na Lyell Collection (The Geological Society)., [Abstract:] The dimension stone industry is one of the leading economic activities of Galicia and it is also an important industry in many other parts in the world. During the sawing and preparation of dimension stone, a large amount of granite sawdust is generated. In the O Porriño area alone, located in the southern part of Galicia, c. 300 000 tonnes are produced every year. According to current EU Directives, granite sawdust is considered to be waste and its disposal must conform to the environmental standards that result from their implementation. The pertinent Spanish laws have established the need to lay down a suitable strategy for the characterization and assessment of sawdust products for the purpose of their satisfactory integration into the dimension stone productive chain. This paper presents the results of a comprehensive characterization study of the granite sawdust of O Porriño (Pontevedra, NW Spain), including a description of its physicochemical, mineralogical and geotechnical properties. On the basis of the results of this characterization, we raise the question of the suitability of this material for use in earthworks as well as in the construction of layers for landfill sealing and/or waterproofing. Our findings show that the properties of granite sawdust are suitable for such purposes, and other possible uses are being studied in continuing research., This work has been funded by the Spanish Ministry of Science and Technology (REN2001-0832-C01/2 and BIA2005-07916-C01/2; J. Delgado and V. Navarro) and by the Galician Government (PGIDIT02PXIC16201PN; J. Delgado). Zeta potential was determined at the laboratories of CIEMAT, and the other analyses were performed at various laboratories of the Universidade da A Coruña. Granite sawdust and production data were kindly provided by the Galician Granite Association. The comprehensive revision by an anonymous reviewer is gratefully acknowledged and greatly appreciated., Xunta de Galicia; PGIDIT02PXIC16201PN
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Modeling of the thermohydrodynamic and reactive behavior of compacted clay for high-level radionuclide waste-management systems

  • Juncosa, Ricardo
  • Navarro, Vicente
  • Delgado Martín, Jordi|||0000-0002-8261-8087
  • Vázquez González, Ana|||0000-0002-4704-6562
Bentonite is often proposed as an engineered-buffer material in high-level radionuclide waste- management systems. For effective design of the barrier that will provide protection over the long time periods required, the physical/thermal/chemical processes taking place in the barrier material must be understood thoroughly. These processes, which interact, include the flow of water and gas, the flow of heat, and the transport and reaction of chemical constituents. The purpose of this study was to better understand the processes that occurred in a small-scale experiment within a confined bentonite space. A conceptual and mathematical model (FADES-CHEM) was built in order to simulate the results of an experiment conducted in 2000, and thereby to gain a better understanding of the controlling processes. In that experiment, a block of compacted bentonite was placed in an air-tight cell and subjected, for 6 months, to simultaneous heating and hydration from opposite sides. The bentonite block was then sliced into five sections each of which was then analyzed in order to obtain a series of physicochemical parameters illustrating the changes that had occurred. Before modeling, the chemical composition of the bentonite pore waters was restored in order to account for different processes such as gas outgassing and cell cooling. Modeling indicated that gas-pressure build up was a relevant process when computing the saturation of bentonite, and the computations in the present study suggested that evaporation/condensation processes played a crucial role in the final distribution of the water content. Gas pressure and evaporation/ condensation also affected the geochemical system, and the numerical model developed gives results that were consistent with the experimental values and trends observed. The model reproduced the results obtained and enable use at the repository scale and over longer time frames, provided that adequate data are available.