Skip to main content

ESTUDIO DE LAS PROPIEDADES MODALES DE CAPAS ELASTICAS Y SU REPERCUSION EN LA TRANSMISION ACUSTICA EN EDIFICIOS

BIA2009-11753

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2009
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

ESTUDIO DE LAS PROPIEDADES MODALES DE CAPAS ELASTICAS Y SU REPERCUSION EN LA TRANSMISION ACUSTICA EN EDIFICIOS

BIA2009-11753

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2009
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Accuracy and robustness of four basic single degree of freedom methods for determining the modal parameters of non-lightly damped systems

  • Anthony, David K.
  • Simón, Francisco
18 páginas, 10 figuras, 4 tablas, An adequate measurement strategy (the combination of measurement method, response parameter, and where applicable, damping estimator) should be used for accurate determination of the natural frequency and damping of non-lightly damped single degree of freedom (SDOF) systems, otherwise, significant measurement bias errors can exist. The accuracy of four commonly used methods is studied and the measurement strategies that are exact are identified. This can depend on the damping mechanism, which if not known can be gleaned from patterns of bias errors between frequency estimations from different strategies. Since in practice a SDOF system rarely exists, or as SDOF techniques are knowingly applied to multiple degree of freedom (MDOF) systems, the robustness of the strategies in the presence of a secondary mode is studied, and the more robust (and therefore preferable) strategies are identified. The measurement method based on the real spectral part is advantageous as it evaluates the damping exactly and is independent of the damping mechanism, in addition the natural frequency obtained is independent of the response parameter. However, this method is not a relatively robust one, and is also sensitive to phase changes accrued during measurements. © 2012 Elsevier Ltd. All rights reserved., The reported work has been supported in part by a research contract (I3P-2003) co-financed by the Consejo Superior de Investigaciones Científicas and the European Union, and a research grant from the Spanish Ministerio de Ciencia e Innovación (BIA2009-11753). The authors would like to thank Jesús Juan (Laboratorio de Estadística, Universidad Politécnica de Madrid [UPM]) for his help and advice in the preparation of this work.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Quantifying quantisation errors for damping measurements using confidence intervals

  • Anthony, David K.
39th International Congress on Noise Control Engineering 2010 (INTER-NOISE 2010), 13-16 June 2010, Lisbon, Portugal. 9 páginas, 4 figuras, 3 tablas, Using a discrete time sampling introduces errors into damping measurements. These are systematic errors that cannot be reduced by averaging, and they are particularly significant for light damping. Using an exact damping measurement method for lightly and non-lightly damped systems and for viscous and hysteretic damping, these errors are studied allowing the errors to be specified in terms of confidence limits. This allows i) the measurement system parameters and measurement errors to be related, and ii) the confidence limits of the actual value of system damping to be calculated given the measured value and the normalized frequency resolution., The author performed this work while on an invited stay at the named institution, and he acknowledeges support by a research grant from the Spanish Ministerio de Ciencia e Innovación (BIA2009-11753) to present this work at Internoise 2010
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Modelado de los errores de discretización en la medida del amortiguamiento mediante propiedades estadísticas locales

  • Anthony, David K.
41º Congreso Nacional de Acústica, Tecniacústica 2010 - 6º Congreso Ibérico de Acústica y el EAA Simposio Europeo sobre Acústica Ambiental y Edificación Acústicamente Sostenible. León, 13 al 15 de octubre de 2010. 8 páginas, 5 figuras, El valor del amortiguamiento de un sistema SDOF se puede obtener exactamente mediante la medida de tres frecuencias de la parte real de la receptancia. Debido a la discretización del eje de frecuencia, cada frecuencia evaluada puede sufrir errores. La especificación de los errores de cada una de ellas no es problemático, pero si lo es la especificación del amortiguamiento. Previamente se ha mostrado como especificar los errores por intervalos de confianza, suponiendo independencia entre cada error. Aquí se explica por qué hay que tratar los errores de forma estadística, y además se muestra la validez de la suposición de independencia de los errores en cada frecuencia., [ENG] The value of damping of a SDOF system can be obtained by evaluating three frequencies using the real part of the receptance. Due to the quantization of the frequency axis, each evaluated frequency can suffer errors. The error specification for each individual frequency is straightforward; however the error specification for the damping value is complex. Using the assumption that the errors are independent, a specification in terms of confidence intervals has previously been shown. Here, it is explained why the errors should be represented on a statistical basis, and the validity of the error independence assumption is also shown., Se presenta este trabajo a TecniAcústica 2010 con el apoyo del proyecto del MICINN (BIA2009-11753)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

An appraisal of the Nyquist method for measuring modal frequency and dampin

  • Simón, Francisco
  • Anthony, David K.
39th International Congress on Noise Control Engineering 2010 (INTER-NOISE 2010), 13-16 June 2010, Lisbon, Portugal. 10 páginas, 4 figuras, 1 tabla, The Nyquist method, determining modal frequency parameters from a response plot in the Argand plane, is a commonly used technique. This method is appraised for lightly and non- lightly damped systems with either viscous or hysteretic damping. It is seen that the Nyquist method is not a generally accurate modal parameter estimation tool: the modal frequency it most accurately measures is the damped natural frequency and it only measures damping accurately for viscous damping in a way that may not always be practical. Then, the use of the Nyquist method to detect and correct for the effect of residuals from other modes is described. It is shown that this when used in combination with an inherently exact modal parameter method can accurately measure the modal parameters of local modes in a multiple degree of freedom system if the modes are well-spaced., The second author performed this work while on an invited stay at the named institution. This work has been partly supported by a research grant from the Spanish Ministerio de Ciencia e Innovación (BIA2009-11753)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Improving the accuracy of the n-dB method for determining damping of non-lightly damped systems

  • Anthony, David K.
  • Simón, Francisco
7 páginas, 6 figuras, Damping measurements using the spectral magnitude remain popular and are studied here for non-lightly damped systems using the variable bandwidth n-dB method, which is advantageous for non-lightly damped systems. The most commonly used estimator (based on normalised bandwidth) provides significant errors for non-lightly damped systems. An existing more accurate method (using the squares of the frequencies used in the former method) is exact for hysteretic damping, but still provides significant error for viscous damping. Improved estimators are developed in order to correct either exactly, or to insignificant errors, measurements taken with existing estimators. Neither further data nor the individual frequencies are required; the previously calculated damping values are corrected. The application of the improved estimators is dependent upon the existing estimator used and the damping type; however a strategy is suggested to reduce errors if the latter is unknown. © 2009 Elsevier Ltd. All rights reserved., The first author performed this work on an invited stay at the named institution. This work has been supported in part by a re- search grant from the Spanish Ministerio de Ciencia e Innovación (BIA2009-11753). The authors would like to thank the referees for their useful comments and suggestions.