Skip to main content

ESTUDIO EXPERIMENTAL Y NUMERICO DE LA INTERACCION ESTRUCTURAL DE HLE CON SECCIONES DE ACERO DE PARED DELGADA Y SU APLICACION EN CONSTRUCCION INDUSTRIALIZADA DE FORJADOS DE ALT

BIA2012-31609

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2012
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Secretaría de Estado de Investigación, Desarrollo e Innovación
Beneficiary centre UNIVERSIDAD DE OVIEDO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Revisión y mejora de la caracterización del grado de impermeabilidad requerido por el CTE DB-HS1 para fachadas de edificación

  • Pérez-Bella, J.M.
  • Domínguez-Hernández, J.
  • Rodríguez-Soria, B.
  • Del Coz-Díaz, J.J.
  • Cano-Suñén, E.
El Código Técnico de la Edificación aprobado en 2006, asigna por primera vez en España diferentes requisitos básicos para los cerramientos verticales de edificación, destinados a limitar el riesgo de presencia inadecuada de humedad en el interior de los edificios. La solicitación por humedad, estimada mediante diversos parámetros climáticos, permite ajustar la exigencia de estos requisitos para cada emplazamiento y fachada. Sin embargo, estos parámetros presentan actualmente posibilidades de mejora que pueden dar lugar a una asignación más adecuada del grado de impermeabilidad y con ello, de los requisitos de diseño necesarios. Este artículo revisa estos parámetros climáticos, presenta otros utilizados internacionalmente para el mismo propósito y caracteriza en el territorio español los factores que determinan la solicitación por humedad, haciendo posible mejorar la prestacionalidad de los requisitos básicos impuestos para las fachadas de los edificios. The Spanish Technical Building Code published in 2006 regulates the basic requirements of building façades to prevent the inadequate presence of atmospheric water inside Spanish buildings. The moisture exposure estimate, based on several climate parameters, allows adjusting these requirements for every location and façade. However, the parameters used by the Spanish Code can be improved, resulting in a more appropriate estimate of the required water tightness degree and thus in an improvable allocations of the necessary design conditions. This paper reviews these parameters, presenting other internationally applied, and analyses the moisture exposure in the Spanish territory, which would allow improving the subsequent performance of the basic requirements imposed to the façades.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Procedure for a detailed territorial assessment of wind-driven rain and driving-rain wind pressure and its implementation to three Spanish regions

  • Pérez-Bella, J. M.
  • Domínguez-Hernández, J.
  • Cano-Suñén, E.
  • del Coz-Díaz, J. J.
  • Martín-Rodríguez, T.
Wind-driven rain and the simultaneous action of wind pressure contribute to water penetration into building façades. Therefore, both climatic parameters must be considered in the design of building enclosures to manage the effects of water intrusion. This article presents a procedure for determining both parameters in a geographic area, by combining various data sources. The procedure was implemented in three Spanish regions with different climates (Galicia, Catalonia and Andalusia), by combining precipitation and wind velocity records compiled at 393 weather stations distributed across these regions, using wind maps, and fitting relationships between exposure indices. In comparison to other studies, this procedure allows for data from a relatively large number of locations to be included in the exposure assessment, which can produce a more detailed characterisation across the territory and facilitate the creation of isopleth exposure maps. A risk index of water penetration, which combines the influence of both exposures, was also calculated. The results showed that the exposure of building façades to water penetration was driven by the climate of each zone. Galicia is the most exposed region. Moreover, the Strait of Gibraltar and Gulf of Cadiz in Andalusia and the Cape of Creus in Catalonia are also zones of high exposure.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

An extended method for comparing water tightness test for facades

  • Pérez-Bella, José M.
  • Domínguez-Hernández, Javier
  • Rodríguez-Soria, Beatriz
  • del Coz-Díaz, Juan J.
  • Cano-Suñén, Enrique
  • Navarro-Manso, Antonio
Watertightness tests for building facades attempt to simulate the most relevant climatic exposures for water penetration by reproducing standard conditions. Such conditions do not represent all possible climatic exposures, hence a new method was recently presented that relates test severity to watertightness performance of a facade under any operating conditions. In addition, test conditions vary for each regulatory framework (i.e. the results generated for one test cannot necessarily be extrapolated to other tests). A process is presented for considering the influence of exposure time. This allows a comparison of the severity of the conditions imposed by different watertightness tests independently of the exposure parameters. This comparison, which is based on a performance criterion, can enable a global certification of watertightness of any facade design under any operating conditions using results from only one watertightness test. The method developed herein was applied to facades under various operational conditions at a reference location, comparatively evaluating the conditions recreated by different international watertightness tests. The results suggest that American tests are more appropriate for recreating high climatic exposures, while European tests are more suitable for evaluating moderate and protected conditions of wind-driven rain and wind pressure.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Combined use of wind-driven rain and wind pressure to define water penetration risk into building façades: The Spanish case

  • Pérez-Bella,J. M.
  • Domínguez-Hernández,J.
  • Rodríguez-Soria,B.
  • del Coz-Díaz,J. J.
  • Cano-Suñén,E.
This article defines a new index to characterise the risk of atmospheric water penetration into building enclosures. This risk index integrates the two most relevant exposure parameters for this phenomenon into a single value, combining the water supply presented by driving rain and simultaneous wind pressure on the surface of the enclosure. Compared with the usual wind-driven rain exposure maps, the inclusion of driving rain wind pressure in this index permits a more complete assessment of the risk of penetration. Therefore, this index represents a powerful tool for defining more appropriate façade solutions for exposures that result in atmospheric water penetration. This risk index was calculated for 80 Spanish sites scattered around the Iberian Peninsula and the Canary and Balearic Islands using daily precipitation averages and wind speed averages for each location collected over 30 years. As a result, a risk index map has been produced for Spain. The risk characterisation obtained in this study enables an objective improvement of current Spanish building regulations governing the design of façades against the penetration of atmospheric water.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A new method for determining the water tightness of building facades

  • Pérez-Bella, J. M.
  • Domínguez-Hernández, J.
  • Rodríguez-Soria, B.
  • Del Coz-Díaz, J. J.
  • Cano-Suñén, E.
Wind-driven rain and wind pressure are two fundamental climatic parameters affecting the penetration of water through building facades. Water tightness tests attempt to reproduce exposure extremes in order to evaluate the resistance to the passage of water through a facade. However, the exposure conditions for a given return period in a real situation can vary with each location and operating condition. Therefore, standardized test conditions may not be representative of all actual exposure conditions, which prevent a precise evaluation of the facade's performance under operating conditions that differ from test settings. A key challenge for water tightness tests is creating a correlation between standard exposure parameters used in testing and any actual exposure conditions. To address this concern, a new method is proposed that determines the return period associated with the tested exposure for the operating conditions of each facade. The new method is used to assess the adequacy of standardized test exposures (specified by EN 12865:2001 for European localities) on a specific facade at a site in Spain. The method estimates more rigorously the design return period related to water tightness performance of any facade and allows for an improvement of its design using the standardized test results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Global analysis of building façade exposure to water penetration in Chile

  • Pérez-Bella,J. M.
  • Domínguez-Hernández,J.
  • Cano-Suñén,E.
  • del Coz-Díaz,J. J.
  • Alonso-Martínez,M.
In this study, the exposure of building façades in Chile to wind-driven rain and driving rain wind pressure was analysed. Daily climatic data from 29 weather stations throughout Chile were used to determine these exposures in scalar terms and are presented in exposure maps. These values were used to estimate the risk index for water penetration at each location and to determine the relationships between the different exposure indices calculated from the daily, monthly, and annual data. Finally, the directional characterisations of these exposures were determined with an alternative method that was based on climatic data from the Chilean stations. This method was used to quantify the exposure of façades oriented in any direction in 6 cities that represent the country's climate: Santiago, Concepción, La Serena, Temuco, Antofagasta, and Puerto Montt. In general, the exposure of façades to water penetration progressively increases from north to south. However, this pattern is affected by the topography of each location, especially in the capital and southern regions. Valdivia, which is located in the centre, and Balmaceda, which is located in the south, showed the greatest risk of water penetration in Chilean façades.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A comparison of methods for determining watertightness test parameters of building façades

  • Pérez-Bella, J. M.
  • Domínguez-Hernández, J.
  • Cano-Suñén, E.
  • del Coz-Díaz, J. J.
  • Suárez-Domínguez, F. J.
Watertightness tests allow evaluating the performance of building façades using standardised parameters that simulate real weather conditions, i.e., a combination of wind-driven rain and driving rain wind pressure. It has been a challenge for researchers to experimentally test simultaneous wind and rain conditions in a rigorous manner. However, two new methods have minimised this problem, creating a precise relationship between the experimental result and the expected performance of the façade under real conditions and vice-versa. This article reviews both alternative methods and analyses their theoretical foundations and comparative advantages. In addition, the two methods are applied in the same case study, analysing the exposure conditions for a generic façade located in Bilbao (Spain). Ten-minute climatic records gathered over 14 years at the city airport have been used for this analysis. The comparative results show an adequate convergence between both procedures. However, their methodological differences would suggest using each one for different specific applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Detailed territorial estimation of design thermal conductivity for façade materials in North-Eastern Spain

  • Pérez-Bella, J. M.
  • Domínguez-Hernández, J.
  • Cano-Suñén, E.
  • Alonso-Martínez, M.
  • Del Coz-Díaz, J. J.
The hygrothermal performance of building envelopes varies based on the temperature and moisture content of their materials. However, multiple building codes adopt constant conductivity values for construction materials based on standardised conditions that do not represent real operating conditions. Currently, a new procedure allows for correcting these normative conductivity values with a limited calculation effort, taking into account the characteristic environmental conditions of each location. This article combines climate records compiled at 313 weather stations distributed in North-Eastern Spain and uses this method to determine the applicable correction factors for materials of masonry façades. The exhaustive characterisation of this geographic area allows for creating correction isopleth maps that may be functionally integrated into building codes to improve the thermal design of buildings at any site of the territory. The results indicate a lower need to correct in mountainous areas, while the Mediterranean coast and the Ebro river valley exhibit larger deviations from normative values with respect to the actual conductivity of the materials. These corrections have been validated in two important cities in this area, Barcelona and Zaragoza.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A correction factor to approximate the design thermal conductivity of building materials. Application to Spanish façades

  • Pérez-Bella, J.M.
  • Domínguez-Hernández, J.
  • Cano-Suñén, E.
  • Del Coz-Díaz, J.J.
  • Álvarez Rabanal, F.P.
The thermal conductivity of building envelope materials varies according to the conditions of temperature and moisture content. Precisely determining the thermal conductivity is a primary challenge in developing more appropriate, realistic thermal designs for buildings. However, a detailed implementation of environmental conditions requires either the use of sophisticated software programmes and the collection of a large set of climate data at each location or a laborious analytical calculation. To simplify the thermal design of buildings, regulations use normative conductivity values based on constant, standardised conditions of temperature and moisture content, which are independent of ambient conditions. This article proposes a correction factor that considers these conditions to functionally approximate the design thermal conductivity of materials based on their normative values. For this calculation, a procedure that simplifies the standard ISO 10456:2007 using the mean annual temperature and relative humidity data for each location is proposed. The procedure is applied in 52 Spanish cities to correct the conductivity values established by the Spanish regulation for façade materials. A correction map of Spain is presented. Finally, by using the ISO standard, the corrections are validated by comparing the values with the design thermal conductivities calculated for different case studies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

On the significance of the climate-dataset time resolution in characterising wind-driven rain and simultaneous wind pressure. Part I: scalar approach

  • Pérez-Bella, J.M.
  • Domínguez-Hernández, J.
  • Cano-Suñén, E.
  • Del Coz-Díaz, J.J.
  • Alonso-Martínez, M.
The joint action of wind-driven rain and wind pressure is the main cause of water penetration in building facades, which causes various habitability and durability problems. The most widespread characterisation of both climate factors is based on exposure indices calculated in free-field conditions from records of precipitation—wind speed (scalar indices), adding wind direction for directional indices. The time resolution of this climate dataset defines the calculation effort and the accuracy obtained, and average daily, monthly, or annual records are typical due to their greater availability. This paper investigates the influence of this time resolution on the accuracy of these scalar exposure indices (driving rain index, hereafter aDRI, and driving-rain wind pressure, hereafter DRWP) by assessing the nature and magnitude of errors associated with different averaged records. For this purpose, 10-min, hourly, daily, monthly and annual meteorological data collected over 15 years in 6 Spanish weather stations at locations characterised by different environments and topography are analysed. In addition, relationships capable of adjusting indices of any time resolution to an accuracy similar to that reached through 10-min records are proposed. In general, the value of driving-rain wind pressure exhibits greater sensitivity than the driving rain index at this time resolution, incorporating significant errors even with daily datasets. In turn, the use of monthly and annual records should be reconsidered, given their high uncertainty. The results demonstrate how the daily datasets for aDRI indices and hourly datasets for DRWP values are sufficient to characterise these exposures with errors of less than 11%.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Hygrothermal properties of lightweight concrete: Experiments and numerical fitting study

  • Del Coz Díaz, J.J.
  • Álvarez Rabanal, F. P.
  • Garcia Nieto, P. J.
  • Domínguez Hernández,J.
  • Rodríguez Soria, B.
  • Pérez-Bella, J. M.
This paper presents an experimental research work in order to obtain the main hygrothermal properties of different mixes of lightweight concrete (LWC) produced from expanded clay. Nowadays, the current state of art assumes an exponential relationship between the moisture content and the thermal properties for this kind of building material. The prime novelty of this study is the experimental determination of the actual hygrothermal properties for different LWC mixes with material densities ranging from 900 to 1400 kg/m3, as well as the least squares best-fitting curves in order to obtain accurate mathematical expressions that permit us to optimize the hygrothermal behavior of new construction products made up of LWC. In this way, the experimental data set is compared with those for the Standard and a new analytical solution is obtained, giving place to a new analytical solution taking into account the relationship among the heat, moisture and density. Finally, the results and conclusions reached in this work are exposed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Adjusting the design thermal conductivity considered by the Spanish building technical code for façade materials

  • Domínguez Hernández, Javier
  • Pérez Bella, José María
  • Cano Suñen, Enrique
  • Coz Díaz, Juan José del
  • Rodríguez Soria, Beatriz
The Spanish Technical Building Code establishes a temperature of 10°C and an equilibrium moisture content with a relative humidity of 50% and 23°C, respectively, as reference to determine the design thermal values of construction materials. However, these reference values are not consistent with the actual climatic conditions of the country, resulting in optimistic designs of the building thermal envelopes and higher energy consumptions than expected by design. This article analyses these differences, reviews the weaknesses of the Spanish Code in this area, and uses a recently developed procedure to determine the actual thermal conductivity of façade materials with similar precision and less calculation effort that the standard UNE-EN ISO 10456. All this would contribute to improve the thermal design currently defined for the Spanish buildings. El Código Técnico de la Edificación vigente en España establece, como condiciones de referencia para determinar los valores térmicos de diseño de los productos de construcción, una temperatura de 10ºC y un contenido de humedad en equilibrio a 23ºC y 50% de humedad relativa. Sin embargo, estos valores de referencia no son coherentes con las condiciones climáticas reales del país, lo que se traduce en diseños optimistas de la envolvente térmica de los edificios y en consumos de energía superiores a los previstos en el diseño. Este artículo analiza estas divergencias, revisa las debilidades del Código Técnico de la Edificación en la materia y estima la conductividad térmica real de los materiales de fachada mediante un nuevo procedimiento, capaz de obtener una precisión similar a la norma UNE-EN ISO 10456 con un menor esfuerzo de cálculo. Todo ello ha de contribuir a mejorar el diseño térmico actualmente establecido para los edificios españoles.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

On the significance of the climate-dataset time resolution in characterising wind-driven rain and simultaneous wind pressure. Part II: directional analysis

  • Pérez-Bella, J.M.
  • Domínguez-Hernández, J.
  • Cano-Suñén, E.
  • Del Coz-Díaz, J.J.
  • Álvarez Rabanal, F.P.
Both semi-empirical methods and CFD simulations use real climate datasets as a basis for determining the building facade exposure to wind-driven rain and simultaneous wind pressure. The time resolution of these datasets and the number of variables considered (commonly rainfall intensity, wind speed and wind direction) determine the required calculation effort and the accuracy of the result. Omitting the wind direction, a former article (Part I of this research) has analysed the effect of this time resolution on two scalar exposure indices obtained by semi-empirical methods: driving rain index (aDRI) and driving-rain wind pressure (DRWP). However, the wind direction during precipitation events also causes significant exposure variations between possible facade orientations. Thus, it is also necessary to clarify the influence of the time resolution of the dataset, on the accuracy of the directional semi-empirical calculation of aDRI and DRWP. To meet this challenge, the article examines 10-min climate records collected between 2001 and 2016 at 6 Spanish locations, uses them to obtain hourly, daily, monthly and annual datasets, and analyses the accuracy of the directional exposure indices associated with each time resolution. The results show that a daily dataset would allow identifying the most exposed orientation with an error less than 45°. However, even the hourly datasets cause errors close to 10% in the exposure values identified on each facade orientation. Finally, adjustment relationships that allow estimating the maximum value of directional exposure from simple scalar indices are obtained.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The use of response surface methodology to improve the thermal transmittance of lightweight concrete hollow bricks by FEM

  • del Coz Diaz, J.J.
  • Garcia-Nieto,P.
  • Alvarez-Rabanall,F.
  • Alonso-Martínez,M.
  • Dominguez-Hernandez,J.
  • Perez-Bella,J.
n this paper, the response surface methodology (RSM) and finite element method (FEM) have been used to develop predictive models for the simulation and optimization of heat transfer process. The input variables were the material conductivity as well as the radiation emissivity, length and width of the recesses. The response variable considered was the thermal transmittance. In order to minimize the thermal transmittance, the RSM technique and FEM analyses have been developed in combination and applied to optimize this parameter. A central composite design (CCD) as the standard design of the RSM technique was used to evaluate the effects and interactions of the six previous factors. Next, the optimal design obtained from the RSM analysis is exposed, demonstrating its ability to build a quadratic polynomial model and to solve nonlinear thermal problems. Finally, analysis of variance (ANOVA) has been used to check the significance of response surface polynomials and FEM models so that the RSM technique was proved as an appropriate methodology for the nonlinear thermal optimization of lightweight concrete hollow bricks.