RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication
Artículo científico (JournalArticle)
Alumina/molybdenum nanocomposites obtained by colloidal synthesis and spark plasma sintering
[EN] Alumina/molybdenum nanocomposites were prepared by colloidal synthesis from alumina powder and molybdenum (V) chloride using ethanol as dispersion medium. Modified alumina was calcined at 450 ¿C in air
atmosphere to remove chlorides, and then treated in a tubular furnace at 850 ¿C under Ar/H2 to reduce the MoO3
formed in the previous stage and obtain Al2O3 with molybdenum nanoparticles on the surface. Three different
molybdenum contents were proposed (1, 5 and 10 wt % Mo), and pure alumina was used as reference, that were
sintered by spark plasma sintering (SPS) under vacuum atmosphere at 1400 ¿C for 3 min with an applied pressure
of 80 MPa. Composites were characterized by microstructure, hardness, toughness, and three-point bending test.
The presence of molybdenum nanoparticles resulted in a fine-grained structure promoted by the presence of
molybdenum at grain boundaries and triple points, as well as by the utilization of the SPS equipment. Hardness is
at least a 20% greater and fracture toughness 30% larger in the composites than in the monolithic alumina., Daniel Fernandez-Gonzalezacknowledges the grant (Juan de la Cierva-Formacion program) FJC2019-041139-I funded by MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia e Innovacion, Agencia Estatal de Investigacion). The authors also acknowledge the financial support received from FICYT (IDI/2021/000106). Juan Pinuela Noval acknowledges the Programa Severo Ochoa of Grants for Research and Teaching of the Principality of Asturias for the funds received for the elaboration of the Ph. D. Thesis (Ref: BP20 041).