Skip to main content

APLICACION DE AGUA NO CONVENCIONAL (TRATADA-DESALADA) Y FANGOS PROCEDENTES DE DEPURADORAS URBANAS Y SU IMPACTO EN EL MEDIO ACUIFERO Y SUELOS. ESTUDIOS DE CAMPO Y LABORATORIO

CGL2010-22168-C03-01

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Green Approach for Ultratrace Determination of Divalent Metal Ions and Arsenic Species Using Total-Reflection X-ray Fluorescence Spectrometry and Mercapto-Modified Graphene Oxide Nanosheets as a Novel Adsorbent

  • Sitko, Rafal
  • Janik, Paulina
  • Zawisza, Beata
  • Talik, Ewa
  • Marguí Grabulosa, Eva
  • Queralt i Mitjans, Ignasi
A new method based on dispersive microsolid phase extraction (DMSPE) and total-reflection X-ray fluorescence spectrometry (TXRF) is proposed for multielemental ultratrace determination of heavy metal ions and arsenic species. In the developed methodology, the crucial issue is a novel adsorbent synthesized by grafting 3-mercaptopropyl trirnethoxysilane on a graphene oxide (GO) surface. Mercapto-modified graphene oxide (GO-SH) can be applied in quantitative adsorption of cobalt, nickel, copper, cadmium, and lead ions. Moreover, GO-SH demonstrates selectivity toward arsenite in the presence of arsenate. Due to such features of GO-SH nanosheets as wrinkled structure and excellent dispersibility in water, GO-SH seems to be ideal for fast and simple preconcentration and determination of heavy metal ions using methodology based on DMSPE and TXRF measurement. The suspension of GO-SH was injected into an analyzed water sample; after filtration, the GO-SH nanosheets with adsorbed metal ions were redispersed in a small volume of internal standard solution and deposited onto a quartz reflector. The high enrichment factor of 150 allows obtaining detection limits of 0.11, 0.078, 0.079, 0.064, 0.054, and 0.083 ng mL(-1) for Co(II), Ni(II), Cu(II), As(III), Cd(II), and Pb(II), respectively. Such low detection limits can be obtained using a benchtop TXRF system without cooling media and gas consumption. The method is suitable for the analysis of water, including high salinity samples difficult to analyze using other spectroscopy techniques. Moreover, GO-SH can be applied to the arsenic speciation due to its selectivity toward arsenite, The project was supported by the National Science Center (Poland) by Grant No. DEC-2012/07/B/ST4/00568 and also by the Spanish National Research Programmes (Project Ref CGL2010-22168-C03-01 and Project Ref CGL2013-48802-C3-2-R)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Analytical possibilities of different X-ray fluorescence systems for determination of trace elements in aqueous samples pre-concentrated with carbon nanotubes

  • Marguí Grabulosa, Eva
  • Zawisza, Beata
  • Skorek, R.
  • Theato, T.
  • Queralt i Mitjans, Ignasi
  • Hidalgo Muñoz, Manuela
  • Sitko, Rafal
This study was aimed to achieve improved instrumental sensitivity and detection limits for multielement determination of V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, Se, Pb and Cd in liquid samples by using different X-ray fluorescence (XRF) configurations (a benchtop energy-dispersive X-ray fluorescence spectrometer, a benchtop polarised energy-dispersive X-ray fluorescence spectrometer and a wavelength-dispersive X-ray fluorescence spectrometer). The preconcentration of metals from liquid solutions consisted on a solid-phase extraction using carbon nanotubes (CNTs) as solid sorbents. After the extraction step, the aqueous sample was filtered and CNTs with the absorbed elements were collected onto a filter paper which was directly analyzed by XRF. The calculated detection limits in all caseswere in the low ng mL-1 range. Nevertheless, results obtained indicate the benefits, in terms of sensitivity, of using polarized X-ray sources using different secondary targets in comparison to conventional XRF systems, above all if Cd determination is required. The developed methodologies, using the aforementioned equipments, have been applied for multielement determination in water samples from an industrial area of Poland, This work was supported by the Spanish National Research Program (Project ref. CGL2010-22168-C03-01)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Possibilities of low-power X-ray fluorescence spectrometry methods for rapid multielemental analysis and imaging of vegetal foodstuffs

  • Gallardo, Helena
  • Queralt i Mitjans, Ignasi
  • Tapias, Josefina
  • Guerra, Mauro
  • Carvalho, Maria Luisa
In the present contribution the possibilities and drawbacks of two analytical strategies based on the use of low power X-ray fluorescence systems (EDXRF and μ-XRF) have been explored for rapid multielemental analysis and chemical imaging of different edible vegetal species. The proposed methodologies allow analysis of vegetation material without complex sample treatments providing relevant advantages in terms of simplicity and costs compared to classical destructive methods. As study cases, we have focused on the analysis of different parts of several vegetal species (Daucus carota, Spinacia oleracea, Cynara scolymus, Raphanus staivus, Coriandrum sativum) collected in agricultural soils irrigated with municipal treated wastewater samples. EDXRF and μ-EDXRF data revealed that content of some major elements such as P and S increased if crops are irrigated with municipal treated wastewater although the distribution of these elements is not depending of the type of water used for irrigation purposes. On the contrary, trace element content is not significantly higher in comparison to vegetables irrigated with fresh water, except for bromine. The findings of this contribution can contribute to expand the knowledge about the impact of the use of reclaimed wastewaters for irrigation on vegetal composition but the use of the aforementioned XRF techniques could be also extended to other food safety and nutritional studies, This work was supported by the Spanish National Research Programmes (Project ref. CGL2010-22168-C03-01 and Project ref. CGL2013-48802-C3-2-R)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Cr speciation in water samples by dispersive liquid-liquid microextraction combined with total reflection X-ray fluorescence spectrometry

  • Bahadir, Z.
  • Bulut, V. N.
  • Hidalgo Muñoz, Manuela
  • Soylak, M.
  • Marguí Grabulosa, Eva
A novel method based on dispersive liquid-liquid microextraction (DLLME) and total-reflection X-ray fluorescence spectrometry (TXRF) is proposed for the determination and preconcentration of inorganic Cr species (Cr(VI) and Cr(III)) in water samples. Parameters affecting the extraction procedure for Cr speciation (pH, sample volume, disperser solvent, complexing agent, organic solvent, temperature) and TXRF conditions (sample volume, drying mode, measurement time, internal standardization) have been carefully evaluated to ensure the highest sensitivity for Cr determination. It was found that the minimum Cr content that can be detected was 0.8 μg L- 1. This value is significantly lower than the maximum Cr content permissible in drinking waters and it is better or comparable with those obtained in other published works based on the use of solid phase extraction or liquid phase microextraction in combination with atomic absorption spectrometry techniques. A good linearity (R2 = 0.9937) was obtained in the range of 5 to 4000 μg L- 1 demonstrating the suitability of the DLLME + TXRF for both the analysis of drinking and waste water samples. Additional advantages of the DLLME-TXRF systems include the use of very small amount of reagents and the simplicity and low cost of operation of the benchtop instrument used (no cooling media and gas consumption are needed), The authorswant to thank the financial support for this project from the Spanish National Research Program (Project ref. CGL2010-22168-C03-01 and Project ref. CGL2013-48802-C3-2-R)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Bromine and bromide content in soils: Analytical approach from total reflection X-ray fluorescence spectrometry

  • Gallardo, Helena
  • Queralt i Mitjans, Ignasi
  • Tapias, Josefina
  • Candela, Lucila
  • Marguí Grabulosa, Eva
Monitoring total bromine and bromide concentrations in soils is significant in many environmental studies. Thus fast analytical methodologies that entail simple sample preparation and low-cost analyses are desired. In the present work, the possibilities and drawbacks of low-power total reflection X-ray fluorescence spectrometry (TXRF) for the determination of total bromine and bromide contents in soils were evaluated. The direct analysis of a solid suspension using 20 mg of fine ground soil (<63 μm) gave a 3.7 mg kg-1 limit of detection for bromine which, in most cases, was suitable for monitoring total bromine content in soils (Br content range in soils = 5-40 mg kg-1). Information about bromide determination in soils is also possible by analyzing the Br content in water soil extracts. In this case, the TXRF analysis can be directly performed by depositing 10 μL of the internal standardized soil extract sample on a quartz glass reflector in a measuring time of 1500 s. The bromide limit of detection by this approach was 10 μg L-1. Good agreement was obtained between the TXRF results for the total bromine and bromide determinations in soils and those obtained by other popular analytical techniques, e.g. energy dispersive X-ray fluorescence spectrometry (total bromine) and ionic chromatography (bromide). As a study case, the TXRF method was applied to study bromine accumulation in two agricultural soils fumigated with a methyl bromide pesticide and irrigated with regenerated waste water, This work was supported by Spanish National Research Programmes (Project ref. CGL2010-22168-C03-01 and Project ref. CGL2013-48802-C3-2-R).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Long-term use of biosolids as organic fertilizers in agricultural soils: potentially toxic elements occurrence and mobility

  • Marguí Grabulosa, Eva
  • Iglesias Juncà, Mònica
  • Camps, F.
  • Sala, Lluís
  • Hidalgo Muñoz, Manuela
The presence of potentially toxic elements (PTEs) may hinder a more widespread application of biosolids in agriculture. At present, the European Directive 86/278/CEE limit the total concentrations of seven metals (Cu, Cr, Ni, Pb, Zn, Cd and Hg) in agricultural soils and in sewage sludges used as fertilizers but it has not taken into consideration the potential impacts of other emerging micropollutants that may be present in the biosolids as well as their mobility. The aim of this study was to evaluate the accumulation and mobility of 13 elements (including regulated metals and other inorganic species) in agricultural soils repeatedly amended with biosolids for 15 years. Firstly, three digestions programs using different acid mixtures were tested to evaluate the most accurate and efficient method for analysis of soil and sludge. Results demonstrated that sewage sludge application increased concentrations of Pb and Hg in soil, but values did not exceed the quality standard established by legislation. In addition, other elements (As, Co, Sb, Ag, Se and Mn) that at present are not regulated by the Spanish and European directives were identified in the sewage sludge, and significant differences were found between Ag content in soils amended with biosolids in comparison with control soils. This fact can be related to the increasing use of silver nanoparticles in consumer products due to their antibacterial properties. Results from the leaching tests show up that, in general, the mobility degree for both regulated and non-regulated elements in soils amended with biosolids was quite low (<10 %), This work was supported by the Spanish National Research Programmes (Project ref. CGL2010-22168-C03-01 and Project ref. CGL2013-48802-C3-2-R)