Skip to main content

APLICACION DE AGUA NO CONVENCIONAL (TRATADA-DESALADA) Y FANGOS PROCEDENTES DE DEPURADORAS URBANAS Y SU IMPACTO EN EL MEDIO ACUIFERO Y SUELOS. ETUDIOS DE CAMPOY LABORATORIO

CGL2010-22168-C03-02

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Brackish groundwater desalination by reverse osmosis in southeastern Spain. Presence of emerging contaminants and potential impacts on soil-aquifer media

  • Valdes-Abellan, Javier
  • Candela, Lucila
  • Jiménez-Martínez, Joaquín
  • Saval Pérez, José Miguel
  • Saval Pérez, José Miguel|||/items/e08c30d7-7578-4b2e-8eb9-eebf974dd3dd
  • Valdes-Abellan, Javier|||/items/910d2d4d-dcf5-4a2c-abb7-c13442d739e4
Desalinated brackish groundwater is becoming a new source of water supply to comply with growing water demands, especially in (semi-) arid countries. Recent publications show that some chemical compounds may persist in an unaltered form after the desalination processes and that there is an associated risk of mixing waters with different salinity for irrigation. At the university of Alicante campus (Spain), a mix of desalinated brackish groundwater and water from the existing aquifer is currently applied for landscape irrigation. The presence of 209 emerging compounds, surfactants, priority substances according to the 2008/105/EC Directive, 11 heavy metals and microbiological organisms in blended water and aquifer samples was investigated. Thirty-five compounds were detected (pesticides, pharmaceuticals and surfactants) among them two priority substances α-endosulfan and Ni were found above the permitted maximum concentration. Blended water used for landscape irrigation during the summer period is supersaturated with respect to carbonates, which may ultimately lead to mineral precipitation in the soil-aquifer media and changes in hydraulic parameters.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Dispersivity Determination Through a Modeling Approach From a Tracer Test Based on Total Br Concentration in Soil Samples

  • Valdes-Abellan, Javier
  • Jiménez-Martínez, Joaquín
  • Candela, Lucila
  • Valdes-Abellan, Javier|||/items/910d2d4d-dcf5-4a2c-abb7-c13442d739e4
Determination of reliable solute transport parameters is an essential aspect for the characterization of the mechanisms and processes involved in solute transport (e.g., pesticides, fertilizers, contaminants) through the unsaturated zone. A rapid inexpensive method to estimate the dispersivity parameter at the field scale is presented herein. It is based on the quantification by the X-ray fluorescence solid-state technique of total bromine in soil, along with an inverse numerical modeling approach. The results show that this methodology is a good alternative to the classic Br− determination in soil water by ion chromatography. A good agreement between the observed and simulated total soil Br is reported. The results highlight the potential applicability of both combined techniques to infer readily solute transport parameters under field conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Comparison among monitoring strategies to assess water flow dynamic and soil hydraulic properties in agricultural soils

  • Valdes-Abellan, Javier
  • Jiménez-Martínez, Joaquín
  • Candela, Lucila
  • Tamoh, Karim
  • Valdes-Abellan, Javier|||/items/910d2d4d-dcf5-4a2c-abb7-c13442d739e4
Irrigated agriculture is usually performed in semi-arid regions despite scarcity of water resources. Therefore, optimal irrigation management by monitoring the soil is essential, and assessing soil hydraulic properties and water flow dynamics is presented as a first measure. For this purpose, the control of volumetric water content, θ, and pressure head, h, is required. This study adopted two types of monitoring strategies in the same experimental plot to control θ and h in the vadose zone: i) non-automatic and more time-consuming; ii) automatic connected to a datalogger. Water flux was modelled with Hydrus-1D using the data collected from both acquisition strategies independently (3820 daily values for the automatic; less than 1000 for the non-automatic). Goodness-of-fit results reported a better adjustment in case of automatic sensors. Both model outputs adequately predicted the general trend of θ and h, but with slight differences in computed annual drainage (711 mm and 774 mm). Soil hydraulic properties were inversely estimated from both data acquisition systems. Major differences were obtained in the saturated volumetric water content, θs, and the n and α van Genuchten model shape parameters. Saturated hydraulic conductivity, Ks, shown lower variability with a coefficient of variation range from 0.13 to 0.24 for the soil layers defined. Soil hydraulic properties were better assessed through automatic data acquisition as data variability was lower and accuracy was higher.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Comparison among monitoring strategies to assess water flow dynamic and soil hydraulic properties in agricultural soils

  • Candela Lledó, Lucila|||0000-0002-1659-6334
  • Valdés Abellán, Javier
  • Jiménez Martínez, Joaquín
  • Tamoh, Karim
Irrigated agriculture is usually performed in semi-arid regions despite scarcity of water resources. Therefore, optimal irrigation management by monitoring the soil is essential, and assessing soil hydraulic properties and water flow dynamics is presented as a first measure. For this purpose, the control of volumetric water content, ¿, and pressure head, h, is required. This study adopted two types of monitoring strategies in the same experimental plot to control ¿ and h in the vadose zone: i) non-automatic and more timeconsuming; ii) automatic connected to a datalogger. Water flux was modelled with Hydrus-1D using the data collected from both acquisition strategies independently (3820 daily values for the automatic; less than 1000 for the non-automatic). Goodness-of-fit results reported a better adjustment in case of automatic sensors. Both model outputs adequately predicted the general trend of ¿ and h, but with slight differences in computed annual drainage (711 mm and 774 mm). Soil hydraulic properties were inversely estimated from both data acquisition systems. Major differences were obtained in the saturated volumetric water content, ¿s, and the n and a van Genuchten model shape parameters. Saturated hydraulic conductivity, Ks, shown lower variability with a coefficient of variation range from 0.13 to 0.24 for the soil layers defined. Soil hydraulic properties were better assessed through automatic data acquisition as data variability was lower and accuracy was higher., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Montmorillonite-supported nanoscale zero-valent iron for removal of arsenic from aqueous solution: Kinetics and mechanism

  • Bhowmick, Subhamoy
  • Chakraborty, Sudipta
  • Mondal, Priyanka
  • Renterghem, Wouter van
  • Van Den Berghe, Sven‏
  • Román-Ross, Gabriela
  • Chatterjee, Debashis
  • Iglesias Juncà, Mònica
Montmorillonite-supported nanoscale zero-valent iron (Mt-nZVI) has been synthesized to remove inorganic arsenic (As) from aqueous solutions. BET, SEM, EDX, XRD and XPS were used to characterize the clay-supported material which consists mainly of core shell Fe(0) structure with an outer oxide/hydroxide shell. The dispersion of nZVI onto montmorillonite was found to be increased with decreasing tendency to agglomerate into larger particles. Batch experiments revealed that adsorption kinetics followed pseudo-second order rate equation with high affinity towards both As(III) and As(V) over a wide pH range (4-8) which was decreased at pH>9. The maximum adsorption capacity calculated from the Langmuir adsorption isotherm was found to be 59.9 and 45.5mgg-1 for As(III) and As(V) respectively at pH 7.0. Although the presence of competing anions like SO42-, HCO3- and NO3- did not show pronounced effect, PO43- had an inhibitory action on the adsorption. The XPS analyses of As-reacted Mt-nZVI indicated the occurrence of surface catalyzed oxidation of As(III) to As(V). The possible regeneration using 0.1M NaOH and performance of Mt-nZVI was investigated by repeating adsorption-elution process. This study has great significance for demonstrating Mt-nZVI as potential adsorbent to reduce elevated levels of As in groundwater, panish National Research Programme supported this work through Project CGL2010-22168-C03-03
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Determination of pharmaceutical compounds in sewage sludge using a standard addition method approach

  • Garcia-Rodríguez, Aida
  • Sagristà Puig, Ester
  • Matamoros, Víctor
  • Fontàs Rigau, Clàudia
  • Hidalgo Muñoz, Manuela
  • Salvadó Martín, Victòria
An analytical method for the simultaneous determination of eight pharmaceutical compounds in biosolids from urban wastewater treatment plants (WWTPs) was developed and validated. The compounds evaluated were non-steroidal anti-inflammatory drugs (naproxen, diclofenac, and ibuprofen), lipid regulators (clofibric acid), and antibiotics (sulfathiazole, sulfapyridine, sulfamethazine, and sulfamethoxazole). Ultrasound assisted extraction with a water–methanol solvent mixture (1:1, v:v) was performed and the compounds were then determined by liquid chromatography coupled with tandem mass spectrometry. The design of the method was based on the application of the standard addition calibration methodology to reduce matrix interferences. Validation procedures were conducted with rabbit excrements as blank samples. Recoveries of the target analytes ranged from 76 to 131% in spiked samples at 50, 200 or 1000 ng g−1 dry weight (dw). The relative standard deviations were in the range of 5–15% and the method detection limits ranged from 2 to 12 ng g−1dw. The method was applied to monitor pharmaceutical concentrations in biosolids from different WWTPs over an eight-month period (May to December 2011). Diclofenac, sulfapyridine and ibuprofen were detected in most of the samples whereas sulfamethazine and ibuprofen were the pharmaceuticals found in the highest concentrations (>200 ng g−1 dw on average), The financial support of the Ministerio de Ciencia e Inovación through projects CTM2008-0647-C02-02/TECNO, CTM2011-28765-C02-02 and CGL2010-22168-C03-03 is gratefully acknowledged
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Migration of components from cork stoppers to food: Challenges in determining inorganic elements in food simulants

  • Corona Prieto, Teresa
  • Iglesias Juncà, Mònica
  • Anticó i Daró, Ma. Enriqueta
The inorganic elements potentially migrating from cork to a food simulant [a hydroalcoholic solution containing 12 and 20% (v/v) ethanol] have been determined by means of inductively coupled plasma (ICP) with atomic emission and mass spectrometric detection. The experimental instrumental conditions were evaluated in depth, taking into account spectroscopic and nonspectroscopic interference caused by the presence of ethanol and other components in the sample. We report concentrations ranging from 4 μg kg-1 for Cd to 28000 μg kg-1 for Al in the food simulant (concentrations given in kilograms of cork). The values found for Ba, Mn, Fe, Cu, and Zn have been compared with the guideline values stated in EU Regulation 10/2011. In all cases, cork met the general safety criteria applicable to food contact material. Finally, we have proposed water as an alternative to the hydroalcoholic solution to simplify quantification of the tested elements using ICP techniques, The Spanish National Research Program supported this work through Project CGL2010-22168-C03-03
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Comparison among monitoring strategies to assess water flow dynamic and soil hydraulic properties in agricultural soils

  • Candela Lledó, Lucila
  • Valdés Abellán, Javier
  • Jiménez Martínez, Joaquín
  • Tamoh, Karim
Irrigated agriculture is usually performed in semi-arid regions despite scarcity of water resources. Therefore, optimal irrigation management by monitoring the soil is essential, and assessing soil hydraulic properties and water flow dynamics is presented as a first measure. For this purpose, the control of volumetric water content, ¿, and pressure head, h, is required. This study adopted two types of monitoring strategies in the same experimental plot to control ¿ and h in the vadose zone: i) non-automatic and more timeconsuming; ii) automatic connected to a datalogger. Water flux was modelled with Hydrus-1D using the data collected from both acquisition strategies independently (3820 daily values for the automatic; less than 1000 for the non-automatic). Goodness-of-fit results reported a better adjustment in case of automatic sensors. Both model outputs adequately predicted the general trend of ¿ and h, but with slight differences in computed annual drainage (711 mm and 774 mm). Soil hydraulic properties were inversely estimated from both data acquisition systems. Major differences were obtained in the saturated volumetric water content, ¿s, and the n and a van Genuchten model shape parameters. Saturated hydraulic conductivity, Ks, shown lower variability with a coefficient of variation range from 0.13 to 0.24 for the soil layers defined. Soil hydraulic properties were better assessed through automatic data acquisition as data variability was lower and accuracy was higher., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Two polydimethylsiloxane rod extraction methods for the sensitive determination of phenolic compounds in water samples

  • Valls Cantenys, Carme
  • Iglesias Juncà, Mònica
  • Salvadó Martín, Victòria
Simple, precise, and low-cost methods for the simultaneous determination of phenolic endocrine disrupting compounds such as bisphenol A, trichlorophenol, pentachlorophenol, 4-nonylphenol, and 4-octylphenol in water samples were developed. The Direct, in situ derivatization methods are based on polydimethylsiloxane rod extraction followed by liquid desorption and chromatographic analysis by liquid chromatography and diode array detection. Several parameters affecting the extraction and desorption of the phenolic compounds and their acetylated derivates were studied, as well as the chromatographic and detection conditions. For the direct method, determination coefficients (r<sup>2</sup>) > 0.990 and LODs in the 0.6-2 μg/L range were obtained for all compounds except bisphenol A (9.5 μg/L). With the derivatization-based method, based on in situ acetylation, lower limits of detection (0.3-0.9 μg/L) were obtained for all the compounds with r<sup>2</sup> > 0.988 and RSDs in the 2-9% range. The developed methods were applied to the analysis of spiked water samples obtaining recoveries of between 60.2 and 131.7% for the direct method, and of between 76.6 and 108.2% for the derivatization-based method. The results demonstrate the feasibility of using these twomethods for determining bisphenol A, trichlorophenol, pentachlorophenol, 4-nonylphenol, and 4-octylphenol in water, This study has been financed by the Spanish Ministry of Science and Innovation through projects CTM2011-28765-C02-02 and CGL2010-22168-C03-03, and an FPI grant (Ref. BES-2009-024892) awarded to C. Valls-Cantenys
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Is saliva a potential biomarker of arsenic exposure? A case-control study in West Bengal, India

  • Bhowmick, Subhamoy
  • Halder, Dipti
  • Kumar, Amit
  • Saha, Debasree
  • Iglesias Juncà, Mònica
  • Nriagu, Jerome
  • Guha Mazumder, Debendra Nath
  • Román-Ross, Gabriela
  • Chatterjee, Debashis
Saliva is a biological fluid that has not been used extensively as a biomonitoring tool in epidemiological studies. This study presents the arsenic (As) concentrations in saliva and urine samples collected from populations of West Bengal, India who had been previously exposed to high As levels in their drinking water. We found a significant (p < 0.05) association between the Log transformed Daily Ingestion of As (μg day-1) and the As concentration in saliva (r = 0.68). Additionally, As concentration of saliva and urine also had a significant positive correlation (r = 0.60, p < 0.05). Male participants, smokers, and cases of skin lesion were independently and significantly associated with an increase in salivary As. Thus our findings show that saliva is a useful biomarker of As exposure in the study population. The study also advocates that measurement of the forms of As in saliva may additionally provide insight into the internal dose and any individual differences in susceptibility to As exposure, The present study was funded by Trehan Foundation to the Center for South Asian Studies, University of Michigan, USA. S.B. and D.H. would like to acknowledge Erasmus Mundus External Cooperation Window (EMECW Action II) Program EURINDIA for providing their respective Doctoral Scholarship. The support from Spanish National Research Programme (CGL2010-22168-C03-03) is also duly acknowledged. The authors would also like to acknowledge the support of Mr. Prabir Kr. Das, Mr. Barun Mitra, and Dr. Nilima Ghosh for their assistance during field work. D.C. acknowledges the support of the DST-FIST and UGC-SAP program of Department of Chemistry, University of Kalyani
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Speciation of arsenic in saliva samples from a population of West Bengal, India

  • Bhowmick, Subhamoy
  • Halder, Dipti
  • Nriagu, Jerome
  • Guha Mazumder, Debendra Nath
  • Román-Ross, Gabriela
  • Chatterjee, Debashis
  • Iglesias Juncà, Mònica
Saliva, an easily accessible biofluid, is validated as biomarker of arsenic (As) exposure in several villages of West Bengal, India. Pentavalent arsenic [As(V)] was found to be the predominant species in saliva, with the amount of inorganic As [As(V) and trivalent form, As(III)] being more than half of the total As in the samples. Significant association was found between total daily ingestion of As and As(V) (r = 0.59; p = 0.000), As(III) (r = 0.60; p = 0.000), dimethylarsinous acid (DMAV) (r = 0.40; p = 0.000), and monomethylarsonous acid (MMAV) (r = 0.44; p = 0.000), implying that these species have mainly been derived from the methylation of the inorganic As in the water that study participants drank and the food they ate. Analysis of confounding effects of age, sex, smoking, body mass index and the prevalence of skin lesion suggests that women and controls with no skin lesion had a higher capacity to methylate the ingested As compared to the rest of the population. Thus, our study demonstrates that As species in saliva can be an useful tool to predict the individual susceptibility where higher As exposure and a lower methylation capacity are implicated in the development of As-induced health effects, We also acknowledge the support from the Spanish National Research Programme (CGL2010-22168-C03-03). S.B. and D.H. acknowledge Erasmus Mundus External Cooperation Window (EMECW Action II) Program EUR-INDIA