Skip to main content

BIOMINERALIZACION EN MOLUSCOS: CRISTALOGRAFIA, ORGANIZACION Y EVOLUCION DE MICROESTRUCTURAS. NANOESTRUCTURA Y CRECIMIENTO DE BIOCRISTALES

CGL2013-48247-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD DE GRANADA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pseudomorphic Replacement of Mg–Ca Carbonates after Gypsum and Anhydrite

  • González-Illanes, Tamara
  • Borrero, María Teresa
  • Herráez, Miriam M.
  • Pimentel, Carlos
  • Pina, Carlos M.
In this paper, we present a comparative study of the pseudomorphic carbonatation of gypsum and anhydrite single crystals in Mg-bearing aqueous solutions at room temperature. We have found that carbonatation of gypsum an anhydrite occurs via a similar coupled dissolution–crystallization mechanism. However, whereas pseudomorphization of anhydrite precisely preserves the external form and dimension of the initial crystals, pseudomorphs after gypsum are less perfect and the shape and volume of the original crystals are partially lost. Furthermore, the mineralogical compositions of the pseudomorphs after anhydrite and gypsum are different, because gypsum is replaced by relatively large calcite crystals, while anhydrite pseudomorphs consist of aggregates of calcite and aragonite. Such textural and compositional differences can be clearly related to the length scale of the coupling between dissolution and crystallization at the replacement fronts. In situ atomic force microscopy observations of the early stages of carbonatation have shown that dissolution and crystallization are very tightly coupled on anhydrite rather than on gypsum surfaces. This clearly indicates that during the replacement of anhydrite and gypsum, dissolution and precipitation, respectively, are the rate-limiting steps. On the other hand, the higher supersaturation levels reached during the replacement of anhydrite lead to a competition between calcite and aragonite crystallization. This explains the fact that calcite and aragonite coexist within the replacement layers after anhydrite. Finally, we have found that dissolved magnesium in the reacting solutions is almost equally incorporated into the pseudomorphs, regardless of both the precursor phase and the mineralogical composition of the replacements. Our calculations and chemical analyses have shown that the compositions of the MgxCa1–xCO3 solid solution for which supersaturations reach maximum values correspond quite well with maximum Mg/Ca ratios in the replacement layers., This work was supported by the Spanish Government (MAT2012-38810 and CGL2013-48247-P). AFM and SEM images, and EDX analyses were obtained at the ICTS Centro Nacional de Microscopia Electrónica-UCM. We thank Ana Vicente for assistance with the SEM. GIXRD patterns were recorded at the X-ray Diffraction Central Service-UCM. We also thank Ignacio Carabias for technical support and valuable help in GIXRD interpretation. C.P. is grateful to the Spanish Government for a FPU Fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

First occurrence of the rare mineral slavikite in Spain

  • Crespo, Ángel
  • Pimentel, Carlos
  • Pedraz, Patricia
  • Pina, Carlos M.
[EN] The magnesium and iron sulfate mineral slavikite has been found in Pastora Mine, Aliseda, Cáceres, Spain, in association with a number of other sulfate minerals such as alunogen, fibroferrite and tschermigite. Remarkably, slavikite is the major phase on some walls of Pastora Mine. To the best of our knowledge, this is the first reported occurrence of slavikite in Spain. Here, we present a mineralogical characterisation of the slavikite found in Pastora Mine using X-ray powder diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, electron probe micro-analysis and thermogravimetry. This characterisation also includes an analysis of the morphology of slavikite crystals based on the Bravais-Friedel-Donnay-Harker method, and the determination of the following slavikite formula from microprobe analyses and thermogravimetric data: Mg4Fe10(SO4)15(OH)8·13(H2O). Finally, we discuss the possible formation conditions of slavikite in Pastora Mine on the basis of available geological information and water analyses. We hypothesise that the presence of slavikite as major sulfate phase in some sites of Pastora Mine is partially the result of a process of mineral enrichment in which the moderate solubility of slavikite and wet and dry weathering cycles play a major role., [ES] El mineral eslavikita, sulfato de hierro y magnesio, se ha encontrado en la Mina Pastora, Aliseda, Cáceres, España, asociado con otros sulfatos como alunógeno, fibroferrita y tschermigita. La eslavikita es la fase más abundante en algunas de las paredes de la Mina Pastora. Hasta donde tenemos conocimiento, ésta es la primera vez que se documenta la presencia de eslavikita en España. En este trabajo se presenta la caracterización mineralógica de la eslavikita encontrada en la Mina Pastora utilizando difracción de rayos X por método de polvo, microscopía electrónica de barrido, espectroscopia de rayos X por energía dispersiva, micro sonda electrónica y análisis termogravimétrico. Esta caracterización incluye también un análisis de la morfología de los cristales de eslavikita, utilizando el método Bravais-Fiedel-Donnay–Harker, y la determinación de la fórmula de la eslavikita a partir de los análisis químicos y termogravimétricos: Mg4Fe10(SO4)15(OH)8·13(H2O). Finalmente, se discuten las posibles condiciones de formación de la eslavikita en la Mina Pastora a partir de los datos geológicos disponibles y de los análisis de aguas locales. El hecho de que la eslavikita sea el sulfato más abundante en algunos lugares de la Mina Pastora indica la actuación de procesos de enriquecimiento mineral en los que la moderada solubilidad de la eslavikita y los ciclos de meteorización secos y húmedos juegan un papel importante., This work was supported by the Spanish Government (MAT2012-38810 and CGL2013-48247-P)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Epitaxial Growth and Frictional Response of Otavite and Spherocobaltite on Dolomite (10.4) Surfaces

  • Pimentel, Carlos
  • Gnecco, Enrico
  • Pina, Carlos M.
Growth of otavite (CdCO3) and spherocobaltite (CoCO3) has been promoted on dolomite (10.4) surfaces at room temperature by immersing cleaved dolomite crystals in highly supersaturated solutions with respect to those phases. In situ atomic force microscopy (AFM) observations show that otavite and spherocobaltite overgrow preferentially on dolomite step edges and (10.4) terraces by two-dimensional nucleation. High-resolution friction AFM images reveal the parallelism between the lattices of the overgrowths and the substrate, demonstrating that the growth of otavite and spherocobaltite on dolomite (10.4) surfaces is epitaxial. Similar values of lattice parameters measured on high-resolution friction images of substrates and overgrowths indicate the accommodation of the otavite and spherocobaltite (10.4) surface lattices to the dolomite substrate structure. The frictional response of otavite and spherocobaltite overgrowth surfaces resulted to be significantly higher than that of dolomite. These differences in frictional response can be attributed to the strain generated by the misfits between dolomite substrates and the overgrowths., This work was partially supported by the Spanish Government (projects MAT2012-38810 and CGL2013-48247-P). AFM and SEM observations were carried out at ICTS Centro Nacional de Microscopı́a Electrónica, Madrid. Authors thank Prof. Steve Parker for his insightful comments at Goldschmidt Conference in Prague (2015). C.P. is thankful to the Spanish Ministry of Education, Culture and Sports for an FPU Grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bending and branching of calcite laths in the foliated microstructure of pectinoidean bivalves occurs at coherent crystal lattice orientation

  • Checa, Antonio G.
  • Yáñez Ávila, María E.
  • González Segura, Alicia
  • Varela Feria, Francisco
  • Griesshaber, Erika
  • Schmahl, Wolfgang W.
Foliated calcite is widely employed by some important pteriomorph bivalve groups as a construction material. It is made from calcite laths, which are inclined at a low angle to the internal shell surface, although their arrangement is different among the different groups. They are strictly ordered into folia in the anomiids, fully independent in scallops, and display an intermediate arrangement in oysters. Pectinids have particularly narrow laths characterized by their ability to change their growth direction by bending or winding, as well as to bifurcate and polyfurcate. Electron backscatter analysis indicates that the c-axes of laths are at a high, though variable, angle to the growth direction, and that the laths grow preferentially along the projection of an intermediate axis between two a-axes, although they can grow in any intermediate direction. Their main surfaces are not particular crystallographic faces. Analyses done directly on the lath surfaces demonstrate that, during the bending/branching events, all crystallographic axes remain invariant. The growth flexibility of pectinid laths makes them an excellent space-filling material, well suited to level off small irregularities of the shell growth surface. We hypothesize that the exceptional ability of laths to change their direction may be promoted by the mode of growth of biogenic calcite, from a precursor liquid phase induced by organic molecules., A.G.C., A.G.-S. and F.V.-F. acknowledge funding provided by projects CGL2013-48247-P and CGL2017-85118-P of the Spanish Ministerio de Ciencia e Innovación. A.G.C. also acknowledges the Research Group RNM363 (Junta de Andalucía) and the Unidad Científica de Excelencia UCE-PP2016-05 of the University of Granada for financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tightly shut: flexible valve margins and microstructural asymmetry in pterioid bivalves

  • Harper, Elizabeth M.
  • Checa, Antonio G.
An organic-rich columnar prismatic outer shell layer, which extends far beyond the underlying nacre, has allowed pterioid bivalves (the pearl oysters and their allies) to develop flexible valve margins, allowing a tight hermetic seal when shut. In some taxa, the microstructural arrangement is known to be asymmetrically developed between the two valves. The asymmetry was surveyed across 29 taxa of pterioids (including representatives of known genera) confirming that it is typically the right valve which has a greater expanse of prism-only shell (and less nacre) and showing that this portion of the right valve has more organic content (more than twice the value in some instances) than the equivalent in the left. A more detailed investigation of prismatic material in Pteria penguin comparing the right and left valves revealed that the right valve flange has a higher density of smaller prisms, each with its organic envelope, and not a greater thickness of the organic envelopes themselves. The flange is also thinner on the right valve and shown here to be very flexible when wet. This allows it to bend against the rigid left valve when the shell is closed. Comparison of this structural asymmetry in the pterioids with five outgroup taxa in the Ostreidae and Pinnidae suggests that clades with the asymmetry have been freed from the constraints of a flattened valve morphology and to develop inequivalved forms., Funding was provided by projects CGL2013-48247-P and CGL 2017-85118-P of the Spanish Ministerio de Ciencia e Innovación. A.G.C. also acknowledges the Research Group RNM363 (Junta de Andalucía) and the Unidad Científica de Excelencia UCE-PP2016-05 of the University of Granada for financial support. We are grateful to Philippe Maestrati for access to the MNHN collections, Mercedes Checa for assistance with measurements and the constructive comments of two reviewers., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structure and crystallography of foliated and chalk shell microstructures of the oyster Magallana: The same materials grown under different conditions

  • Checa, Antonio G.
  • Harper, Elizabeth M.
  • González Segura, Alicia
Oyster shells are mainly composed of layers of foliated microstructure and lenses of chalk, a highly porous, apparently poorly organized and mechanically weak material. We performed a structural and crystallographic study of both materials, paying attention to the transitions between them. The morphology and crystallography of the laths comprising both microstructures are similar. The main differences were, in general, crystallographic orientation and texture. Whereas the foliated microstructure has a moderate sheet texture, with a defined 001 maximum, the chalk has a much weaker sheet texture, with a defined 011 maximum. This is striking because of the much more disorganized aspect of the chalk. We hypothesize that part of the unanticipated order is inherited from the foliated microstructure by means of, possibly, 011 8 twinning. Growth line distribution suggests that during chalk formation, the mantle separates from the previous shell several times faster than for the foliated material. A shortage of structural material causes the chalk to become highly porous and allows crystals to reorient at a high angle to the mantle surface, with which they continue to keep contact. In conclusion, both materials are structurally similar and the differences in orientation and aspect simply result from differences in growth conditions., Special thanks are given to Isabel Sánchez-Almazo (Univ. Granada) for her help with scanning microscopy and to Antonio Sánchez-Navas (Univ. Granada) for advice on the crystallography of calcite. Funding was provided by projects CGL2013-48247-P and CGL2017-85118-P (to A.G.C., E.M.H. and A.G.-S.) of the Spanish Ministerio de Economía, Industria y Competitividad. A.G.C. also acknowledges the Research Group RNM363 (Junta de Andalucía).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Physical and biological determinants of the fabrication of Molluscan shell microstructures

  • Checa, Antonio G.
Molluscs are grand masters in the fabrication of shells, because these are composed of the largest variety of microstructures found among invertebrates. Molluscan microstructures are highly ordered aggregates of either calcite or aragonite crystals with varied morphologies and three-dimensional arrangements. Classically, every aspect of the fabrication of microstructural aggregates is attributed to the action of proteins. There was, however, only direct evidence that the mineral phase, and indirect evidence that nucleation and the crystal shape, are determined by the types of soluble proteins. Some authors imply that crystal competition may also play a role. In addition, the fabrication of intergranular organic matrices typical of some microstructures (nacre, columnar prismatic) cannot have a protein-based explanation. Over the last decade I and collaborators have been applying a holistic view, based on analyzing and interpreting the features of both the organic (mantle, extrapallial space, periostracum, organic matrices) and inorganic (crystallite morphology, arrangement, and crystallography) components of the biomineralization system. By interpreting them on biophysical principles, we have accumulated evidence that, in addition to the activity of proteins, other mechanisms contribute in an essential way to the organization of molluscan microstructures. In particular, we have identified processes such as: (1) crystal nucleation on preformed membranes, (2) nucleation and growth of crystals between and within self-organized membranes, (3) active subcellular processes of contact recognition and deposition. In summary, besides the activity of organic macromolecules, physical (crystal competition, self-organization) and/or biological (direct cellular activity) processes may operate in the fabrication of microstructures. The balance between the physical and biological determinants varies among microstructures, with some being based exclusively on either physical or biological processes, and others having a mixed nature. Other calcifying invertebrates (e.g., corals, cirripeds, serpulids) secrete microstructures that are very similar to inorganic crystal aggregates, and only some brachiopods and, to a lesser extent, bryozoans may have secretory abilities comparable to those of molluscs. Here I provide a new perspective, which may allow microstructures to be understood in terms of evolutionary constraints, to compare the secretional abilities among taxa, and even to evaluate the probability of mimicking microstructures for the production of functional synthetic materials., AC received funding from Project CGL2013-48247-P and CGL2017-85118-P of the Spanish Ministerio de Economía y Competitividad (MINECO) and the Fondo Europeo de Desarrollo Regional (FEDER), from the Research Group RNM363 (Consejería de Economía, Innovación, Ciencia y Empleo of the Junta de Andalucía) and from the Unidad Científica de Excelencia UCE-PP2016-05 of the University of Granada.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Transformation of ACC into aragonite and the origin of the nanogranular structure of nacre

  • Macías-Sánchez, Elena
  • Willinger, Marc G.
  • Pina, Carlos M.
  • Checa, Antonio G.
Currently a basic tenet in biomineralization is that biominerals grow by accretion of amorphous particles, which are later transformed into the corresponding mineral phase. The globular nanostructure of most biominerals is taken as evidence of this. Nevertheless, little is known as to how the amorphous-to-crystalline transformation takes place. To gain insight into this process, we have made a high-resolution study (by means of transmission electron microscopy and other associated techniques) of immature tablets of nacre of the gastropod Phorcus turbinatus, where the proportion of amorphous calcium carbonate is high. Tablets displayed a characteristic nanoglobular structure, with the nanoglobules consisting of an aragonite core surrounded by amorphous calcium carbonate together with organic macromolecules. The changes in composition from the amorphous to the crystalline phase indicate that there was a higher content of organic molecules within the former phase. Within single tablets, the crystalline cores were largely co-oriented. According to their outlines, the internal transformation front of the tablets took on a complex digitiform shape, with the individual fingers constituting the crystalline cores of nanogranules. We propose that the final nanogranular structure observed is produced during the transformation of ACC into aragonite., Funding was provided by Research Projects CGL2013-48247-P of the Spanish Ministerio de Economía y Competitividad (MINECO) and Fondo Europeo de Desarrollo Regional (FEDER) (to all authors), and P10-RNM-6433 of the Andalusian Consejería de Economía, Investigación, Ciencia y Empleo of the Junta de Andalucía, and by the Research Group RNM363 (latter Institution) (to E.M.S. and A.G.C.). E.M.S. was funded by a PhD grant associated to Project P10-RNM-6433. A.G.C. also received support from the Unidad Científica de Excelencia UCE-PP2016-05, of the University of Granada.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The cuttlefish Sepia officinalis (Sepiidae, Cephalopoda) constructs cuttlebone from a liquid-crystal precursor

  • Checa, Antonio G.
  • Cartwright, Julyan H. E.
  • Sánchez-Almazo, Isabel
  • Andrade, Jose Pedro
  • Ruiz-Raya, Francisco
Cuttlebone, the sophisticated buoyancy device of cuttlefish, is made of extensive superposed chambers that have a complex internal arrangement of calcified pillars and organic membranes. It has not been clear how this structure is assembled. We find that the membranes result from a myriad of minor membranes initially filling the whole chamber, made of nanofibres evenly oriented within each membrane and slightly rotated with respect to those of adjacent membranes, producing a helical arrangement. We propose that the organism secretes a chitin-protein complex, which self-organizes layer-by-layer as a cholesteric liquid crystal, whereas the pillars are made by viscous fingering. The liquid crystallization mechanism permits us to homologize the elements of the cuttlebone with those of other coleoids and with the nacreous septa and the shells of nautiloids. These results challenge our view of this ultra-light natural material possessing desirable mechanical, structural and biological properties, suggesting that two self-organizing physical principles suffice to understand its formation., Special thanks are given to António Sykes (Univ. Algarve) for his help with breeding cuttlefish. This research was funded by projects CGL2010-20748-CO2-01 (to A.G.C. and F.R.R.), CGL2013-48247-P (to A.G.C. and I.S.A.) and FIS2013-48444-C2-2-P (to J.H.E.C.) of the Spanish Ministerio de Ciencia e Innovación, and RNM6433 (to A.G.C., J.H.E.C. and I.S.A.), of the Andalusian Consejería de Innovación Ciencia y Tecnología, and 31.03.05.FEP.002 (Sepiatech, PROMAR program) of the Portuguese Ministério da Agricultura e do Mar, Portugal (to J.P.A.). A.G.C. and J.H.E.C. also acknowledge the Research Group RNM363 (Junta de Andalucía) and the FP7 COST Action TD0903 of the European Community.