Skip to main content

MEZCLA Y DISPERSION EN EL TRANSPORTE DE ENERGIA Y SOLUTOS

CGL2013-48869-C2-1-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Heat Dissipation Test With Fiber-Optic Distributed Temperature Sensing to Estimate Groundwater Flux

  • del Val, Laura
  • Carrera, Jesús
  • Pool, María
  • Martínez, Lurdes
  • Casanovas, Carlos
  • Bour, Olivier
  • Folch, Albert
We measure groundwater flux and thermal parameters around a borehole performing a heat dissipation test by heating the armor of a single fiber-optic cable and interpreting the resulting heating curves with a new analytical method. The procedure is similar to thermal response tests, but benefitting from the high spatial and temporal resolution of distributed temperature sensing and lasting longer, so as to measure advective dissipation. Field installation relies on an innovative method in hydrogeology, which is based on the installation of the FO cable in the annular space of the well, close to the aquifer matrix. The proposed new analytical method, expands the traditional Moving Infinitesimal Line Source Model to account for the effects of the field set up and cable materials. In fact, we show that the resulting temperature build-up goes through four periods easy to identify using the log derivative of temperature (dT/d (ln(t))): Initial response, skin (cable insulation), conduction dominated and advection dominated. We test the proposed method in an unconsolidated shallow aquifer with controlled pumping. Results are of the same order of magnitude of independent estimates of groundwater velocity., This work was funded by the projects CGL2016-77122-C2−1−R / 2-R and PID2019-110212RB-C22 / C21 of the Spanish Government. We would like to thank SIMMAR (Serveis Integrals de Manteniment del Maresme) and the Consell Comarcal del Maresme in the construction of the research site. We would like to acknowledge Sensornet (UK) for their support and collaboration. We would also like to thank Dr. Javier Benitez Buelga for his collaboration in designing and setting up the fiber-optic field installation. The author Albert Folch is a Serra Húnter Fellow., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hydromechanical characterization of tide-induced head fluctuations in coastal aquifers: The role of delayed yield and minor permeable layers

  • Goyetche, Tybaud
  • Pool, María
  • Carrera, Jesús
  • Luquot, Linda
Tidal analysis is an aquifer scale testing that is a low-cost alternative to pumping tests for evaluating aquifer hydraulic parameters without groundwater extraction. Many analytical solutions may be used to assess aquifer head fluctuations in response to tidal fluctuations. Nonetheless, they are rarely used in practice. Aside from that, most analytical solutions are based on a conceptual model that typically consists of an unconfined aquifer and a confined aquifer separated by an aquitard, where hydraulic head fluctuations in the unconfined aquifer part are commonly neglected. Additionally, the frequent confined aquifer short response time to sea-level fluctuations cannot rely on hydraulic connection of the confined aquifer to the sea through the aquitard. As a consequence, when analytical solutions are applied to real-world cases, the hydraulic diffusivity is overestimated. In this study, we investigate through different numerical simulations the fluctuations of the phreatic surface by considering the delayed yield. Numerical results demonstrate that the mechanical effect generated by the load over the sea bottom exerted by sea-level fluctuations is a key factor when determining aquifer parameters. We further show that in multilayer systems, head fluctuations in various aquifer layers can cause interferences and, consequently, increased attenuation of the tidal signal, resulting in an overestimation of the inferred hydraulic diffusivity. Our results provide guidance on how to properly reproduce tidal responses in coastal aquifers., We acknowledge the Spanish Ministry of Economy, Industry and Competitiveness to fund this work through projects CGL2013-48869-C2-1-R/2-R and CGL2016-77122-C2-1-R/2-R and for the PhD fellowship (BES-2017-080028) from the FPI Program awarded to T. Goyetche. We also thank two reviewers for their valuable comments., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Heat dissipation test with fiber-optic distributed temperature sensing to estimate groundwater flux

  • Val Alonso, Laura del
  • Carrera Ramírez, Jesús|||0000-0002-8054-4352
  • Pool Ramírez, Maria
  • Martínez Landa, Lourdes|||0000-0002-4823-9892
  • Casanovas Muñoz, Carlos
  • Bour, Olivier
  • Folch Sancho, Albert|||0000-0002-8490-1038
We measure groundwater flux and thermal parameters around a borehole performing a heat dissipation test by heating the armor of a single fiber-optic cable and interpreting the resulting heating curves with a new analytical method. The procedure is similar to thermal response tests, but benefitting from the high spatial and temporal resolution of distributed temperature sensing and lasting longer, so as to measure advective dissipation. Field installation relies on an innovative method in hydrogeology, which is based on the installation of the FO cable in the annular space of the well, close to the aquifer matrix. The proposed new analytical method, expands the traditional Moving Infinitesimal Line Source Model to account for the effects of the field set up and cable materials. In fact, we show that the resulting temperature build-up goes through four periods easy to identify using the log derivative of temperature (dT/d (ln(t))): Initial response, skin (cable insulation), conduction dominated and advection dominated. We test the proposed method in an unconsolidated shallow aquifer with controlled pumping. Results are of the same order of magnitude of independent estimates of groundwater velocity., This work was funded by the projects CGL2016-77122-C2−1−R / 2-R and PID2019-110212RB-C22 / C21 of the Spanish Government. We would like to thank SIMMAR (Serveis Integrals de Manteniment del Maresme) and the Consell Comarcal del Maresme in the construction of the research site. We would like to acknowledge Sensornet (UK) for their support and collaboration. We would also like to thank Dr. Javier Benitez Buelga for his collaboration in designing and setting up the fiber-optic field installation. The author Albert Folch is a Serra Húnter Fellow., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Heat dissipation test with fiber-optic distributed temperature sensing to estimate groundwater flux

  • Val Alonso, Laura del
  • Carrera Ramírez, Jesús
  • Pool Ramírez, Maria
  • Martínez Landa, Lourdes
  • Casanovas Muñoz, Carlos
  • Bour, Olivier
  • Folch Sancho, Albert
We measure groundwater flux and thermal parameters around a borehole performing a heat dissipation test by heating the armor of a single fiber-optic cable and interpreting the resulting heating curves with a new analytical method. The procedure is similar to thermal response tests, but benefitting from the high spatial and temporal resolution of distributed temperature sensing and lasting longer, so as to measure advective dissipation. Field installation relies on an innovative method in hydrogeology, which is based on the installation of the FO cable in the annular space of the well, close to the aquifer matrix. The proposed new analytical method, expands the traditional Moving Infinitesimal Line Source Model to account for the effects of the field set up and cable materials. In fact, we show that the resulting temperature build-up goes through four periods easy to identify using the log derivative of temperature (dT/d (ln(t))): Initial response, skin (cable insulation), conduction dominated and advection dominated. We test the proposed method in an unconsolidated shallow aquifer with controlled pumping. Results are of the same order of magnitude of independent estimates of groundwater velocity., This work was funded by the projects CGL2016-77122-C2−1−R / 2-R and PID2019-110212RB-C22 / C21 of the Spanish Government. We would like to thank SIMMAR (Serveis Integrals de Manteniment del Maresme) and the Consell Comarcal del Maresme in the construction of the research site. We would like to acknowledge Sensornet (UK) for their support and collaboration. We would also like to thank Dr. Javier Benitez Buelga for his collaboration in designing and setting up the fiber-optic field installation. The author Albert Folch is a Serra Húnter Fellow., Peer Reviewed, Postprint (published version)