Skip to main content

EL SISTEMA CENTRAL Y LOS MECANISMOS DE DEFORMACION DE LA PENINSULA IBERICA

CGL2014-56548-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

3-D seismic travel-time tomography validation of a detailed subsurface model: A case study of the Záncara river basin (Cuenca, Spain)

  • Martí, David
  • Marzán, Ignacio
  • Sachsenhauser, Jana
  • Alvarez-Marrón, Joaquina
  • Ruiz Fernández, Mario
  • Torné, Montserrat
  • Mendes, Manuela
  • Carbonell, Ramón
A high-resolution seismic tomography survey was acquired to obtain a full 3-D P-wave seismic velocity image in the Záncara river basin (eastern Spain). The study area consists of lutites and gypsum from a Neogene sedimentary sequence. A regular and dense grid of 676 shots and 1200 receivers was used to image a 500 m×500 m area of the shallow subsurface. A 240-channel system and a seismic source, consisting of an accelerated weight drop, were used in the acquisition. Half a million travel-time picks were inverted to provide the 3-D seismic velocity distribution up to 120 m depth. The project also targeted the geometry of the underground structure with emphasis on defining the lithological contacts but also the presence of cavities and fault or fractures. An extensive drilling campaign provided uniquely tight constraints on the lithology; these included core samples and wireline geophysical measurements. The analysis of the well log data enabled the accurate definition of the lithological boundaries and provided an estimate of the seismic velocity ranges associated with each lithology. The final joint interpreted image reveals a wedge-shaped structure consisting of four different lithological units. This study features the necessary key elements to test the travel time tomographic inversion approach for the high-resolution characterization of the shallow subsurface. In this methodological validation test, travel-time tomography demonstrated to be a powerful tool with a relatively high capacity for imaging in detail the lithological contrasts of evaporitic sequences located at very shallow depths, when integrated with additional geological and geophysical data., This work has been supported by projects (ref: CGL2014-56548-P, CGL2016-81964-REDE) supported by the Spanish Ministry of Science and Innovation, 2017 SGR 1022 Gen-eralitat de Catalunya, and by ENRESA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Integration of SAR and passive seismic data for monitoring mining activities (Minas Riotinto, SW Iberia)

  • Marzán, Ignacio
  • Escayo, Joaquin
  • Martí, David
  • Tornos, F.
  • Ruiz Fernández, Mario
  • Andrés, Juvenal
  • Schimmel, Martin
  • Luzón, Francisco
  • Carbonell, Ramón
  • Fernández Torres, José
Trabajo presentado en la European Geosciences Union General Assembly, celebrada en Viena (Austria), del 8 al 13 de abril de 2018, The extraction of raw materials is constrained by hazards linked to mining activities. Earthworks and pumping change soil mechanical properties and can cause landslides, subsidence or runoff drifting with potential serious economic, environmental and human-life consequences. The present research aims to reduce mining hazards by developing a “real time” system for monitoring ground instabilities. Our approach combines SAR Copernicus data (Sentinel-1) for surface deformation modeling and passive seismic data for subsurface imaging. Both data sources require low maintenance, can be automatized, record non-stop and fully cover the target zone; all suitable characteristics for an Early Warning System tool. This pilot study is being performed in the world-class Riotinto mine, SW Spain, with mining activity going back for more than 4000 years. A-DInSar techniques (CPT) have been used for processing Sentinel-1 images to establish the baseline surface deformation field. Our algorithm will automatically update the image catalogue and the surface deformation model. Environmental and anthropogenic “seismic noise” will be used for the subsurface imaging. The mining activities generate a broad variety of acoustical signal. Currently, the main seismic sources are being characterized. Autocorrelation and noise interferometry techniques will be use for underground dynamic imaging. Both datasets will be integrated into a new protocol for monitoring the mechanical integrity of the shallow subsurface, applicable to a wide range of environments, Research support, Ref: 248/G/GRO/COPE/16/9077 - Lot 2, CGL2016-81964-REDE, CGL2014-56548-P, ESP2013-47780-C2-1-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Seismic characterization of the Alhama de Murcia Fault (Epicentral area of the Lorca 2011 earthquake)

  • Gascón, R.
  • Martí, David
  • Martínez-Díaz, J. J.
  • Teixidó, T.
  • Camacho, J. P.
  • Marzán, Ignacio
  • Carbonell, Ramón
Trabajo presentado en el 17th International Seismix Symposium, celebrado en Aviemore (Escocia), del 15 al 20 de mayo de 2016, The Alhama de Murcia fault (AMF) is one of the most active faults of the Iberian Peninsula and the source of the Lorca 2011 earthquake that caused significant demage including several casualties. This NE-SW oblique (strike slip-reverse movement) fault, extended up to 100 km, has been extensively mapped to characterize its surface structure but almost no information is available of the structure and geometry at depth. As a result of the Lorca 2011 earthquake and its devastating effects in the population a need for better knowledge of the AMF became mandatory. Accordingly, InterGEO project pursues to understand the seismic behaviour of the fault and determine its relevance in seismic hazard. In order to achieve this, a multidisciplinary approach is used including detailed geological mapping, paleoseismic trenches, borehole logging and geophysical characterization., The main aim is to characterize the AMF in the sorroundings of the Lorca city ,from surface to depth, in the most interesting fault segments., Research supports: CGL2014-56548-P, 2009-SGR-1595 , CGL2013-47412-C2-1-P, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

CIMDEF: a wide-angle deep seismic reflection profile in the Central Iberian Zone

  • Ayarza, P.
  • Carbonell, Ramón
The CIMDEF experiment consists on two NW-SE to N-S oriented deep seismic reflection transects and one E-W oriented in the W of Spain. It aimed to sample the Variscan Central Iberian Zone. This transect was designed to be the northward continuation of the ALCUDIA seismic profile, EU - EIT Raw Materials, 17024_20170331_92304. Spanish National Research Program, CGL2014-56548-P; CGL2016-81964-REDE, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Lithospheric structure of the Spanish Central System

  • Carbonell, Ramón
  • Andrés, Juvenal
  • Ayarza, P.
  • Draganov, D.
  • Schimmel, Martin
  • Palomeras, Imma
  • Zamir Ruiz, Mario
  • Martínez-Poyatos, David
  • González Lodeiro, Francisco
AGU Fall Meeting 2019 in San Francisco, 9-13 december 2019, The Spanish Central System is an intraplate mountain range dividing the Iberian Inner Plateau in two sectors ¿ the Duero Basin (N) and, the Tajo Basin (S). The latter has an average altitude of 450-500 m while the former presents a higher average altitude 750-800 m. This intraplate orogen features a thick-skin pop-up and pop-down configuration formed by the reactivation of Variscan structures. Its high topography is the response of a tectonically thickened crust evidenced by 1) the geometry of the Moho discontinuity 2) an imbricated crustal architecture and/or 3) the rheological properties of the lithosphere. Research has been carried out to build a lithospheric-scale model across the orogen. A 400 km long multi-seismic transect has been acquired using natural and controlled source seismic data. The earthquakes and seismic noise data was acquired over a period of one to two months of continuous recording along a linear array (69 short-period seismic stations). The controlled source data included over 1000 stations and a series of acoustic sources. This effort has delineated the geometry of the base of the crust by: Global-Phase Seismic and, conventional noise interferometry, and, wide-angle imaging. The Global Phase approach used PK, PKiKP and PKIKP phases of earthquakes (> 120° epicentral distance). Stacking of the autocorrelations of these phases contribute to a pseudo zero-offset X-section. The application of ambient noise seismic interferometry complements the zero-offset reflection image, defining the geometry of the Moho. Further details on the lithospheric structure is provided by seismic wide-angle reflection images, which reveal a clear thickening of the crust below the Central System resulting, most probably, from an imbrication of the lower crust. Accordingly, the crust-mantle boundary is mapped as a relative flat interface at approximately 10 s two-way travel time except under the Central System, where this feature deepens towards the NW reaching more than 12 s. An intra-crustal boundary is well defined at 5 s. Reflectivity within upper-mantle depths is scattered throughout the profile, located between 13-18 s, and probably related with the Hales discontinuity. Funding resources: EU EIT-RawMaterials Ref: 17024_20170331_92304; MINECO: CGL2016-81964-REDE CGL2014-56548-P: JCYL: SA065P17), Funding resources: EU EIT-RawMaterials Ref: 17024_20170331_92304; MINECO: CGL2016-81964-REDE CGL2014-56548-P: JCYL: SA065P17)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Seismic Modeling of the Subcrustal Reflectivity Beneath the Iberian Massif (Spain)

  • Palomeras, Imma
  • Ayarza, P.
  • Diaz, J.
  • Andrés, Juvenal
  • Carbonell, Ramón
EGU2020: Sharing Geoscience Online, 4-8 may 2020, Sub-Moho reflectors have been identified in seismic refraction and wide-angle reflection recordings in western Iberia since the late `80s. These control source seismic wide-angle shot records have energy large enough to illuminate the uppermost mantle showing strong sub-Moho arrivals at distant offsets (>180 km) with amplitudes significantly higher than the Pn and a relatively long coda. The kinematics and wavelet characteristics of these features are probably produced by an increase in P-wave velocity, and forward modeling indicates that these arrivals reflect off an interface in the 60-80 km depth range beneath the Iberian Massif. The waveform and time length of this arrival suggests that it can result from the interaction of the seismic energy with a ~10 km thick heterogeneous layer. To test this hypothesis, we used a 2D second-order finite-difference acoustic and elastic full wave-field scheme with a layer consisting of randomly distributed bodies smaller than ¿ of the wavelength of the seismic waves in thickness and ¿Vp=±0.2 km/s at the considered depth range. Resulting synthetic shot gathers reproduce well the observed amplitudes and codas as a result of the constructive interference caused by the tuning effect produced by this gradient heterogeneous zone. The contrast in physical properties and depth level of this feature are consistent with the top of the phase transition from spinel to garnet lherzolite, the so-called Hales discontinuity. Some of the available gathers show a second and deeper reflection. Detailed analysis of the reflected wave-forms suggests that the reflected wavelet has reversed polarity, a feature suggesting. a velocity decrease with depth. Finite difference acoustic and elastic full wave-field modeling places this discontinuity around 90 km depth beneath the Ossa-Morena Zone (south Iberian Massif). A lateral change is observed beneath the Centro-Iberian Zone (central Iberian Massif) where it is imaged at 103-110 km depth on the southeast and shallows up to 80 km depth on the northeast. The indicated depth would be consistent with the depth location of the LAB, which is relatively well constrained for the target area by other geophysical observations., Funding resources: EU EIT-RawMaterials Ref: 17024_20170331_92304; MINECO: CGL2016-81964-REDE CGL2014-56548-P: JCYL: SA065P17).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Imaging The Crustal Structure Of The Spanish Central System

  • Andrés, Juvenal
  • Ayarza, P.
  • Schimmel, Martin
  • Draganov, D.
  • Palomeras, Imma
  • Alcalde, Juan
  • Ruiz Fernández, Mario
  • Carbonell, Ramón
19th International Symposium on Deep Seismic Profiling of the Continents and their Margins (SEISMIX 2020), 15-19 march, 2020, Australia, In this work, we present lithospheric-scale model of across the Iberian Massif in western Iberia. The image comprises the Spanish Central System mountain range and, the Cenozoic Duero and Tajo basins which bound it to the N and S, respectively. The target area represents one of the most characteristics topographic features of central Iberia; the Tajo Basin has an average altitude of 450-500 m while, the Duero Basin presents higher average altitude 750-800 m. The Central System represents part of the Variscan Central Iberian Zone (southern margin of the Paleozoic Gondwana) which was reactivated and uplifted during the Alpine Orogeny. This intraplate orogen features a thick-skin pop-up and pop-down configuration formed by the reactivation of Variscan structures. Its high topography is the response of a tectonically thickened crust evidenced by 1) the geometry of the Moho discontinuity 2) an imbricated crustal architecture and/or 3) the rheological properties of the lithosphere. A research project (CIMDEF) was carried out in the area and, it includes an almost 330-km long multi-seismic profile acquired using natural and controlled source seismic data. The former consists of two months of continuous recording by an almost-linear array of 69 short-period seismic stations, which recorded earthquakes and, ambient seismic noise. The controlled source data included over 900 stations and a series of acoustic sources. The data places strong constraints on the geometry of the base of the crust. The research effort includes: seismic interferometry (using seismic noise recordings), wide-angle analysis of the controlled source data and, Global-Phase seismic imaging. The latter uses PKP, PKiKP, and PKIKP phases of earthquakes at epicentral distances > 120° and, their reverberations in the lithosphere. The selected phases are autocorrelated and stacked to construct a high-resolution pseudo zero-offset reflection image. Seismic noise interferometry uses the autocorrelation of seismic noise ambient records. These autocorrelations provide an approximation to a zero-offset reflection response of a single station. Both methods are complementary as they rely on different energy sources but are applied to the same receivers locations. The results reveal the geometry of the Moho. Further details on the lithospheric structure is provided by seismic wide-angle reflection images, which reveal a clear thickening of the crust below the Central System resulting, most probably, from an imbrication of the lower crust. Results reveal features that can be correlated in all the images. The crust-mantle boundary is mapped as a relative flat interface at approximately 10 s two-way traveltime except under the Central System, where this feature deepens towards the NW reaching more than 12 s. An intra-crustal boundary is well defined at 5 s. Reflectivity within upper-mantle depths is scattered throughout the profile, located between 13-18 s, and probably related with the Hales discontinuity., Funding resources: EU EIT-RawMaterials Ref: 17024_20170331_92304; MINECO: CGL2016-81964-REDE CGL2014-56548-P: JCYL: SA065P17)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

The Mid-Crustal Seismic Discontinuity In The Iberian Massif

  • Ayarza, P.
  • Martínez, A.
  • Alcalde, Juan
  • Martí, David
  • Andrés, Juvenal
  • Palomeras, Imma
  • Carbonell, Ramón
  • Martínez Catalán, J. R.
19th International Symposium on Deep Seismic Profiling of the Continents and their Margins, 15th – 20 th March 2020, Perth, Australia, A number of deep vertical incidence seismic experiments have been conducted in the Iberian Massif (SW Spain) since the 1990¿s, in order to unravel the architecture of the crust. The images obtained revealed an outstanding seismic signature change in the different sub-domains of the Iberian Massif and a conspicuous boundary separating the upper and lower crust. In this work we present the most complete and homogeneous image of all the vertical incidence seismic data acquired up to date, and use it to unravel the characteristics of this mid crustal feature, in order to shed light on the evolution of this portion of the Variscan Orogen. We use the depth and geometry of the mid-crustal boundary to estimate the amount of crustal thickening, later extension and partial melting underwent by the Gondwanan crust during the Variscan collision with the peri-Godwanan terranes and Laurussia. In the South Portuguese Zone (SW Iberia), the discontinuity divides the crust into two layers with similar thickness but featuring opposite vergence reflectivity, probably related to Variscan deformation. To the north, the mid-crustal discontinuity becomes shallower while the crustal thickness stays remains relatively constant in the Ossa Morena and Central Iberian zones. This could be an indication of that either the upper crust was originally thinner or that the whole crust thickened and was later isostatically re-equilibrated through erosion and uplift processes. The northwestern part of the Iberian Massif, in the Central Iberian and Galicia-Trás-os-Montes zones, show little remnants of the mid-crustal discontinuity or it is located very deep, resulting in a very thin lower crust. These areas were generally affected by the late Variscan crustal melting, while in the Central Iberian Zone, melting seems to be limited to the upper crust. The conspicuous mid-crustal feature divides an upper and a lower crust exhibiting contrasting reflectivity and geometry, and provide evidences of the different mechanisms to accommodate deformation, and may represent the Iberian equivalent to what in other areas worldwide are interpreted as Conrad Discontinuity., Funding resources: EU EIT-RawMaterials Ref: 17024_20170331_92304; MINECO: CGL2016-81964-REDE CGL2014-56548-P: JCYL: SA065P17)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Crustal structure of the Iberian Central System (Iberian Peninsula: The wide-angle seismic reflection CIMDEF experiment.

  • Carbonell, Ramón
  • DeFelipe, Irene
  • Andrés, Juvenal
  • Alcalde, Juan
  • Ayarza, P.
  • Palomeras, Imma
  • Ruiz Fernández, Mario
  • Martínez-Poyatos, David
  • González Lodeiro, Francisco
  • Granja Bruña, J. L.
  • Torné, Montserrat
  • Rodríguez, Robert
AGU FALL Meeting 2020 - Online, 1-17 December, 2020, The Iberian Massif is one of the most complete sections of the Variscan orogen and crops out in the western part of the Iberian Peninsula. Since the early 90s it has been the target of a number of geophysical studies to characterize its lithospheric structure. The internal architecture of the Iberian microplate presents critical constraints on the way the Iberian lithosphere responds to the imposed stress regime. This is a compressive tectonic setting resulted from the collision between the Iberian and the European plates. This stress regime is most probably responsible for the deformation patterns that is reflected by the topographic relief of the Iberian Peninsula with few intraplate orogens. The Iberian Central System constitutes a major intraplate orogenic belt conventionally interpreted as a pop-up structure. In order to place geophysical constraints on this relevant topographic feature, crustal structure and deformation style a wide-angle seismic reflection and refraction experiment, CIMDEF (Central Iberian Mechanism of DEFormation), was acquired in 2017 and 2019. It consisted of three NNW-SSE and E-W oriented profiles ranging between 130 and 330 km in length. These profiles run through the Duero basin, the Iberian Central System and the Tajo basin, allowing us to construct a P-wave velocity model in this sector of the Central Iberian Zone. First results based on forward modeling by raytracing show a crust of ~ 32 km thick under the Duero and Tajo basins that thickens to ~ 39 km under the Iberian Central System. A reduction of the lower crust thickness towards the south of the Iberian Central System is also modeled. At far offsets (> 190 km), an upper mantle reflection is observed, modeled as an interface at 58 to 62 km depth with a P-wave velocity contrast of 8.2 to 8.3 km/s. Our preliminary results complement previous models in this area based on Global-Phase Seismic Interferometry and gravity data; provide new constraints to validate the accuracy of passive seismic methods at lithospheric scale in the Variscan orogeny; and contribute with a resolute model of the P-wave velocity in the study area., This project has been funded by the EIT-RawMaterials 17024_20170331_92304; and MINECO: CGL2016-81964-REDE, CGL2014-56548-P.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

What can seismic noise tell us about the Alpine reactivation of the Iberian Massif? An example in the Iberian Central System

  • Andrés, Juvenal
  • Ayarza, P.
  • Schimmel, Martin
  • Palomeras, Imma
  • Ruiz Fernández, Mario
  • Carbonell, Ramón
The Iberian Central System, formed after the Alpine reactivation of the Variscan Iberian Massif, features maximum altitudes of 2500 m. It is surrounded by two foreland basins with contrasting elevation: the Duero Basin to the north, located at 750-800m, and the Tajo Basin to the south, lying at 450-500 m. The deep crustal structure of this mountain range seems to be characterized by the existence of a moderate crustal root that provides isostatic support for its topography. New seismic data are able to constrain the geometry of this crustal root, which appears to be defined by a northward lower-crustal imbrication of the southern Central Iberian crust underneath this range. Contrarily to what was expected, this imbrication also affects the upper crust, as the existing orogen-scale mid-crustal Variscan detachment was probably assimilated during the Carboniferous crustal melting that gave rise to the Central System batholith. In addition, the lower crust might have thinned, allowing coupled deformation at both crustal levels. This implies that the reactivated upper-crustal fractures can reach lower-crustal depths, thus allowing the entire crust to sink. This new model can explain the differences in topography between the Central System foreland basins. Also, it provides further constraints on the crustal geometry of this mountain range, as it seems to be that of an asymmetric Alpine-type orogen, thus hindering the existence of buckling processes as the sole origin of the deformation. The results presented here have been achieved after autocorrelation of seismic noise along the CIMDEF (Central Iberian Massif DEFormation Mechanisms) profile. Although the resolution of the dataset features limited resolution (0.5-4 Hz, stations placed at similar to 5 km), this methodology has allowed us to pinpoint some key structures that helped to constraint the deformation mechanisms that affected Central Iberia during the Alpine orogeny., This research has been supported by the Ministerio de Ciencia e Innovacion (grant nos. CGL2014-56548-P and CGL2016-81964-REDE), the Consejeria de Educacion, Junta de Castilla y Leon (grant no. SA065P17), and the Generalitat de Catalunya (grant no. 2017-SGR-1022)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Joint interpretation of geophysical data: Applying machine learning to the modeling of an evaporitic sequence in Villar de Cañas (Spain)

  • Marzán, Ignacio
  • Martí, David
  • Lobo, Agustín
  • Alcalde, Juan
  • Ruiz Fernández, Mario
  • Alvarez-Marrón, Joaquina
  • Carbonell, Ramón
An optimal strategy for building realistic geological models must combine different geophysical techniques, each with its advantages and limitations. However, dealing with multiple geophysical datasets to derive a geological interpretation is not straightforward since geophysical parameters are not always functionally related. In this work, we propose an innovative approach consisting of using machine learning techniques to jointly interpret three geophysical datasets (a pseudo-3D resistivity model, a 3D velocity model, and 4 well-logs). These datasets, among others, were acquired to characterize the suitability of an evaporitic sequence for hosting a temporary storage facility of hazardous radioactive waste, which was planned in Villar de Cañas (Spain). Our strategy consisted of integrating both models in a single 3D bi-parametric grid that nested the velocity and resistivity values in each node. We then used a supervised learning algorithm to lithologically classify each node according to a training set based on the borehole data, which acts as ground truth. The training set is composed of classifiers that lithologically label resistivity-velocity pairs. However, the very shallow nodes lack classifiers due to the poor well-log coverage at the top part of the evaporitic sequence. To fill this gap, we computed an unsupervised cluster analysis that provided new classes to complete the training set. Finally, the supervised classification was applied, providing a new 3D lithology model that is far more consistent with the geology than the models derived from each parameter independently. The 3D model also revealed geological features previously unknown, notably the existence of an inactive fault. The proposed method can be applied to integrate and jointly interpret any kind of multidisciplinary datasets in a wide range of geoscientific problems, including natural resource exploration, geological storage, environmental monitoring, civil engineering practice, and hazard assessment., This work has been supported by projects ref: CGL2014-56548-P, CGL2016-81964-REDE supported by the Spanish Ministry of Science and Innovation, 2017 SGR 1022 Generalitat de Catalunya and, by ENRESA, the latter also facilitated access to log and resistivity data acquired and processed by industry partners (thanks and acknowledgments to INYPSA, EPTISA, ByA-Peñarrolla, and AGS). The instrumentation for the seismic acquisition was provided by different sources: the seismic data recording system consisted of 10 GEODE (Geometrics) and was provided by the GIPP-GFZ Potsdam (Germany). The acoustic energy used as a source was generated by a 250 kg accelerated weight drop provided by the Instituto Tecnico Superior, Univ. Lisbon, (Portugal) and a 90 kg accelerated weight drop provided by the Univ. of Oviedo, (Spain). JA is funded by MICINN (Juan de la Cierva fellowship - IJC2018-036074-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Lithospheric structure of the Iberian Central System (Iberian Massif) imaged by the wide-angle seismic reflection/refraction CIMDEF experiment

  • DeFelipe, Irene
  • Ayarza, P.
  • Palomeras, Imma
  • Andrés, Juvenal
  • Ruiz Fernández, Mario
  • Alcalde, Juan
  • Martínez-Poyatos, David
  • González Lodeiro, Francisco
  • Yenes, Mariano
  • Torné, Montserrat
  • Carbonell, Ramón
vEGU21: Gather Online , 19–30 April 2021, The Iberian Central System represents an outstanding topographic feature in the central Iberian Peninsula. It is an intraplate mountain range formed by igneous and metasedimentary rocks of the Variscan Iberian Massif that has been exhumed since the Eocene in the context of the Alpine orogeny. The Iberian Central System has been conventionally interpreted as a thick-skinned popup mountain range thrust over the Duero and Tajo foreland basins. However, its lithospheric structure and the P-wave velocity distribution are not yet fully resolved. In order to place geophysical constraints on this relevant topographic feature, to identify lithospheric discontinuities, and to unravel the crustal deformation mechanisms, a wide-angle seismic reflection and refraction experiment, CIMDEF (Central Iberian Mechanism of DEFormation), was acquired in 2017 and 2019. It is a NNW-SSE oriented 360-km long profile that runs through the Duero basin, the Iberian Central System and the Tajo basin. First results based on forward modeling by raytracing show an irregularly layered lithosphere and allow to infer the depth extent of the northern Iberian Central System batholith. The crust is ~ 31 km thick under the Duero and Tajo basins and thickens to ~ 39 km under the Iberian Central System. A conspicuous thinning of the lower crust towards the south of the Iberian Central System is also modeled. Along this transect, a continuous and high amplitude upper mantle feature is observed and modeled as the reflection of an interface dipping from 58 to 62 km depth featuring a P-wave velocity contrast of 8.2 to 8.3 km/s. Our preliminary results complement previous models based on global-phase seismic and noise interferometry and gravity data, provide new constraints to validate the accuracy of passive seismic methods at lithospheric scale, and contribute with a resolute P-wave velocity model of the study area to unravel the effect of the Alpine reactivation on the central Iberian Massif., This project has been funded by the EIT-RawMaterials 17024 (SIT4ME) and the MINECO projects: CGL2016-81964-REDE, CGL2014-56548-P.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Caracterización de la estructura cortical bajo la Zona Centro Ibérica: el experimento CIMDEF

  • DeFelipe, Irene
  • Andrés, Juvenal
  • Alcalde, Juan
  • Palomeras, Imma
  • Ruiz Fernández, Mario
  • Ayarza, P.
  • Martínez-Poyatos, David
  • González Lodeiro, Francisco
  • Granja Bruña, J. L.
  • Rodríguez Fernández, Ricardo
  • Torné, Montserrat
  • Carbonell, Ramón
X Congreso Geológico de España, 5-7 Julio 2021, Vitoria - Gasteiz, El Macizo Ibérico, en la parte occidental de la Península Ibérica, constituye una sección prácticamente completa del orogéno Varisco. Desde los años 90 este macizo ha sido objeto de diferentes estudios geofísicos para conocer la estructura a escala cortical. No obstante, en su parte central ¿ la Zona Centro Ibérica ¿ todavía no existían datos de sísmica profunda. Con el fin de aportar información geofísica en esta zona, en 2017 y 2019 se llevó a cabo el experimento de sísmica de reflexión y refracción de gran ángulo, CIMDEF (Central Iberian Mechanism of DEFormation). Este proyecto consiste en tres perfiles de orientación NNO-SSE y E-O de entre 130 y 330 km de longitud que atraviesan la cuenca del Duero, el Sistema Central y la cuenca del Tajo, lo que nos ha permitido construir un nuevo modelo de velocidades de ondas P en este sector de la Zona Centro Ibérica. Los resultados complementarán los modelos previos basados en interferometría sísmica de fases globales y sísmica de ruido ambiente (Andrés et al., 2019, 2020), aportando nuevos datos para validar la precisión de métodos sísmicos pasivos a escala litosférica en el orógeno Varisco., The Iberian Massif, in the western part of the Iberian Peninsula, constitutes a nearly complete section of the Variscan orogen. Since the 1990s it has been target of different geophysical studies to unravel the crustal structure. However, there was a remarkable lack of deep seismic sounding data in its central part – the Central Iberian Zone. To fill this gap, a wide-angle seismic reflection and refraction experiment, CIMDEF (Central Iberian Mechanism of DEFormation), was acquired in 2017 and 2019. CIMDEF consists of three NNW-SSE and E-W oriented profiles ranging between 130 and 330 km in length. These profiles run through the Duero basin, the Central System and the Tajo basin, allowing us to construct a new P-wave velocity model in this sector of the Central Iberian Zone. Furthermore, it will help to complement previous models in this area based on Global-Phase Seismic Interferometry and ambient seismic noise (Andrés et al., 2019, 2020), thus providing new constraints to validate the accuracy of passive seismic methods at lithospheric scale in the Variscan orogen., EU EIT-RawMaterials 17024_20170331_92304; MINECO: CGL2016-81964-REDE, CGL2014-56548-P).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Crustal structure of the Iberian Central System and adjacent basins Estructura cortical del Sistema Central y sus cuencas adyacentes

  • Andrés, Juvenal
  • Ayarza, P.
  • Schimmel, Martin
  • Draganov, D.
  • Palomeras, Imma
  • Ruiz Fernández, Mario
  • Carbonell, Ramón
X Congreso Geológico de España, 5-7 Julio 2021, Vitoria - Gasteiz, The crustal structure of the Iberian Central System has been studied using passive seismic techniques. We have applied seismic interferometry to a passive dataset through two techniques to generate a lithospheric-scale cross-section of the orogen. The resulting images constrain the structure of the crust below the mountain range and that of its surrounding sedimentary basins. Both techniques provide complementary results. The resulting images reveal that the crust¿mantle boundary is relatively flat, with arrival times of approximately 10 s two-way travel time except in the Central System, where reflectors are located at 12 s two-way travel time. This indicates a clear thickening of the crust below the core of the orogen, resulting, most probably, from an imbrication of the crust. The boundary between the upper and lower crust is found at 5 s two-way travel and it is also slightly deeper below the mountain range., This research has been supported by the Spanish National Research Program (grant nos. CGL2014 56548-P and CGL2016-81964-REDE), the regional government of Castilla and León (project SA065P17), and the Generalitat de Catalunya (grant no. 2017-SGR-1022);Juvenal Andrés is supported by FPI from the Spanish Ministry of Science, Innovation and Universities (grant no.BES-2015-071683).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Estructura cortical del Sistema Central y sus cuencas adyacentes, Crustal structure of the Iberian Central System and adjacent basins

  • Andrés, Juvenal
  • Ayarza, P.
  • Schimmel, Martin
  • Draganov, D.
  • Palomeras, Imma
  • Ruiz Fernández, Mario
  • Carbonell, Ramón
X Congreso Geológico de España, 5-7 Julio 2021, Vitoria - Gasteiz, La estructura cortical del Sistema Central Ibérico se ha estudiado mediante técnicas de sísmicas pasivas. Hemos aplicado interferometría sísmica a un conjunto de datos pasivos a través de dos técnicas para generar una corte a escala litosférica del orógeno. Las imágenes resultantes constriñen la estructura cortical de la cordillera y la de sus cuencas sedimentarias adyacentes. Ambas técnicas presentan resultados similares. Las imágenes obtenidas revelan que el límite entre la corteza y el manto es relativamente plano, con tiempos de llegada de aproximadamente de 10 s en tiempo doble, excepto bajo el Sistema Central, donde los reflectores están ubicados a 12 s en tiempo doble. Esto define un claro engrosamiento de la corteza debajo del Sistema Central, como resultado, muy probablemente, de una imbricación de la misma. El límite entre la corteza superior e inferior se encuentra a 5 s en tiempo doble y es también ligeramente más profundo debajo de la cordillera., The crustal structure of the Iberian Central System has been studied using passive seismic techniques. We have applied seismic interferometry to a passive dataset through two techniques to generate a lithospheric-scale cross-section of the orogen. The resulting images constrain the structure of the crust below the mountain range and that of its surrounding sedimentary basins. Both techniques provide complementary results. The resulting images reveal that the crust–mantle boundary is relatively flat, with arrival times of approximately 10 s two-way travel time except in the Central System, where reflectors are located at 12 s two-way travel time. This indicates a clear thickening of the crust below the core of the orogen, resulting, most probably, from an imbrication of the crust. The boundary between the upper and lower crust is found at 5 s two-way travel and it is also slightly deeper below the mountain range., This research has been supported by the Spanish National Research Program (grant nos. CGL2014 56548-P and CGL2016-81964-REDE), the regional government of Castilla and León (project SA065P17), and the Generalitat de Catalunya (grant no. 2017-SGR-1022); Juvenal Andrés is supported by FPI from the Spanish Ministry of Science, Innovation and Universities (grant no. BES-2015-071683).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Identification of natural and anthropogenic signals in controlled source seismic experiments

  • Diaz, J.
  • DeFelipe, Irene
  • Ruiz, M. Teresa
  • Andrés, Juvenal
  • Ayarza, P.
  • Carbonell, Ramón
The analysis of the background noise in seismic networks has proved to be a powerful tool not only to acquire new insights on the crustal structure, but also to monitor different natural and anthropogenic processes. We show that data acquired during controlled source experiments can also be a valuable tool to monitor such processes, in particular when using high-density deployments. Data from a wide-angle reflection and refraction seismic profile in the central-northwest part of Iberia is used to identify signals related to aircrafts, road traffic, quarry blasts, wind blow, rainfall or thunders. The most prominent observations are those generated by a helicopter and an airplane flying following trajectories subparallel to the profile, which are tracked along 200 km with a spatial resolution of 350 m, hence providing an exceptional dataset. Other highlights are the observation of the Doppler effect on signals generated by moving cars and the high-density recording of acoustic waves generated by thunders. In addition to the intrinsic interest of identifying such signals, this contribution proves that it is worth inspecting the data acquired during seismic experiments beyond the time interval including the arrival of the seismic waves generated by the controlled source., The authors want to acknowledge all the staff that made possible the data acquisition, as well as the Geo3Bcn-CSIC LabSis Laboratory (http://labsis.geo3bcn.csic.es, last access, October 2021) for making their seismic station available for this experiment.This research has been supported by the Ministerio de Economía y Competitividad grant no. CGL2014-56548-P with additional support from the Ministerio de Ciencia, Innovación y Universidades grant no. RTI2018-095594-B-I00. PA is currently funded by projects SA084P20 from the Junta de Castilla y León, and by PGC2018-094227-B-I00 and PGC2018-093903-B-C21, from the Ministerio de Ciencia, Innovación y Universidades., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Crustal Imbrication in an Alpine Intraplate Mountain Range: A Wide-Angle Cross-Section Across the Spanish-Portuguese Central System

  • DeFelipe, Irene
  • Ayarza, P.
  • Palomeras, Imma
  • Ruiz Fernández, Mario
  • Andrés, Juvenal
  • Alcalde, Juan
  • Martínez-Poyatos, David
  • González Lodeiro, Francisco
  • Yenes, Mariano
  • Elez, Javier
  • Pérez-Cáceres, Irene
  • Torné, Montserrat
  • Carbonell, Ramón
Intraplate ranges are topographic features that can occur far from plate boundaries, the expected position of orogens as described in the plate tectonics theory. To understand the lithospheric structure of intraplate ranges, we focused on the Spanish-Portuguese Central System (SPCS), the most outstanding topographic feature in the central Iberian Peninsula. The SPCS is an Alpine range that exhumes Precambrian-Paleozoic rocks and is located at >200 km from the northern border of the Iberian microplate. Here, we provide a P-wave velocity model based on wide-angle seismic reflection/refraction data of the central SPCS (Gredos sector). Our results show: (a) a layered lithosphere characterized by three major interfaces: Conrad, Mohorovicic, and Hales discontinuities, (b) an asymmetry of the crust-mantle boundary under the SPCS, (c) the extent of the Variscan batholith forming the main outcrops of Gredos, and (d) the thinning of the lower crust toward the south. This model suggests that the exhumation of the SPCS basement was driven by a south-vergent thick-skinned thrust system, developed in the southern part of the SPCS and that promoted crustal imbrication and a Mohorovicic discontinuity's offset under the SPCS. Thus, the deformation mechanisms of the crust seem to be controlled by the presence of the late- to post-Variscan granitoids that assimilated the Variscan mid-crustal detachment creating a new rheological boundary. This tectonic structure allowed the formation of Alpine crustal-scale thrust systems that eased coupled deformation of the upper and lower crust, leading to limited underthrusting of both crustal layers., This study has been funded by the Ministry of Science, Innovation and Competitiveness through the Project CIMDEF (CGL2014-56548-P). IP is funded by the Spanish Government and the University of Salamanca (Beatriz Galindo grant BEGAL 18/00090). JA is funded by grant IJC2018-036074-I, funded by MCIN/AEI/10.13039/501100011033. DMP and FGL are also funded by grants CGL2015-71692 (MINECO/ FEDER) and PID2020-118822GB-I00 (MCIN/AEI/10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

A crustal-scale section of the NW Iberia: deformation mechanisms and transfer during the Alpine compression

  • DeFelipe, Irene
  • Ayarza, P.
  • Palomeras, Imma
  • Ruiz, M.
  • Andrés, Juvenal
  • Carbonell, Ramón
Orogen formation, tectonic inversion and deformation transfer are processes that shape plate boundaries, contribute to define topography in the plate's interior and delineate continent/ocean transitions However, the crustal deformation mechanisms that govern these processes vary deeply depending on the tectonic setting and the overlap of successive tectonic plate's phases. The NW part of the iberian Peninsula comprises from north to south: i) the partially inverted passive continental North Iberian Margin (NIB), ii) the Cantabrian Mountains (CM) formed in the northern boundary of the Iberian subplate during the Alpine compression, and iii) an intraplate range, the Spanish-Portuguese Central System (SPCS). In addition, the CM and SPCS are separated by the Duero Cenozoic basin which represents an elevated plateau (~800 m), whereas to the south of the SPCS, the Madrid Cenozoic basin is located at 400 m altitude. Here, we present a 650-km long crustal-scale cross-section going from the NIB to the south of the Madrid Cenozoic basin. The latter is based on new hyperbolic moveout processing of wide-angle seismic reflection/refraction data and on the reinterpretation of previous Pwave velocity models. Our data show an asymmetry of the Moho reflections at both sides of the SPCS and deep subvertical reflectors to the south of the SPCS that we interpret as the image of south-vergent crustal-scale thick-skinned thrusts. This contrasts with the deformation pattern of the CM, where deformation is decoupled between the upper and lower crust and only the Iberian lower crust subducts to the north reaching at least 45 km. This crustal architecture results from the inversion during the Alpine contraction of inherited structures and weakness zones: mid-Cretaceous extensional detachments in the NIB and CM, and late- to post-Variscan granitoid intrusion that prompted crustal-scale fault nucleation in the contact with the host rocks in the SPCS. Here, the Conrad discontinuity separating the upper and lower crust was assimilated during granitoid intrusion in the late-Variscan extension, constraining the pattern used to accommodate deformation and playing a key role in the final contrasting altitudes of the SPCS's Northern and Southern foreland basins., This study was supported by: The Spanish National Research Program under grants (CGL2014-56548-P; CGL2016-81964-REDE), the Generalitat de Catalunya (2017-SGR-1022) and the Junta de Castilla y León (SA084P20).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Seismic Reflection constraints on the fracture system bounding the Guadalentín Valley (SE Iberian Peninsula): The UnriDDLE Project

  • Perea, Héctor
  • Herrero-Barbero, Paula
  • Li, Hongqiang
  • Carbonell, Ramón
  • Molins-Vigatà, J.
  • Alcalde, Juan
  • Álvarez Gómez, José Antonio
  • Berriolopez Llamosas, M.
  • Díaz, Y de Pro
  • Dufour, D.
  • García Mayordomo, Julián
  • Granja, Jose Luis
  • Insúa Arévalo, Juan Miguel
  • Martí, David
  • Martín Banda, Raquel
  • Masana, Eulàlia
  • Ollé López, M.
  • Pascual-Sanchez, E.
  • Portela, J. J.
  • Rivera, Jhonathan
  • Sánchez-Roldán, José Luis
  • Staller, Alejandra
  • Rameez, S.
20th International Symposium on Deep Seismic Profiling of the Continents and their Margins, 24-28 June 2024 Uppsala, Sweden, The Guadalentin Depression is bordered by an active left-lateral strike-slip fracture system, which serves as the corresponding tectonic boundary. This depression is a significant elongated Plio-Quaternary basin located within the deformation corridor of the Eastern Betic Shear Zone (EBSZ), trending in a NE-SW direction. Stretching for about 100 km, the western margin of the basin is characterized by a prominent mountain front mainly controlled by the Alhama de Murcia fault. Along with other major faults such as the Carrascoy and the Palomares faults, and some secondary related minor fractures, the whole system may absorb part of the deformation related to the convergence between Iberia and North Africa (4-5 mm/yr). As a result, the system show a moderate seismic activity; however some large and damaging events have occurred in the area. Notably, the most recent significant earthquake was a 5.1 magnitude event in 2011, which occurred near the town of Lorca and was associated to the Alhama de Murcia fault. In addition, active tectonics and paleoseismological studies carried out in all the system have shown that faults have produce large earthquakes during the Holocene and late Quaternary. Even though, there is still a lack of knowledge about the deep structure of the faults. In order to address this shortcoming, we have acquired high-resolution seismic reflection transects, one across the Palomares Fault, three across the Alhama de Murcia fault, and one across the Carrascoy fault. The seismic data was acquired using a mini-Vib system, which provided sufficient energy to produce seismic sections reaching depths of over 2 km. The resulting high-resolution seismic reflection images are allowing to unveil the deep structure and geometry of the region, providing valuable insights into the upper Neogene deformation history. Additionally, these images have revealed fracture branches in the subsurface, contributing to a better understanding of the region's geological characteristics. Overall, the information obtained from these studies is crucial in reducing uncertainties in seismic hazard assessments for the area. It enhances our understanding of the tectonic activity and geological processes, aiding in the development of effective strategies for seismic risk mitigation and hazard management., Data acquisition was funded by projects GEO 90-0660 (CICYT), 1FD1997-2179/RYEN1 (CICYTFEDER), GL2007-63101/BTE and CGL2014-56548-P (MICINN). Research has also been suppported by EU grants 8711212 (EPOS-SP), 170522 (SERA), and EIT17024 (SIT4ME), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

The `Big Four' orogen-scale lithospheric discontinuities in the Iberian Massif

  • Ayarza, Pui
  • Palomeras, Imma
  • DeFelipe, Irene
  • Gómez-Barreiro, J.
  • Carbonell, Ramón
Controlled source seismic surveying has long provided the best resolved images of the Earth's interior. The structure of complete orogens has been unraveled with the use of this technique, providing -continent and continent-continent collisions. In this regard, vertical incidence and refraction/wide angle seismic reflection studies have been extensively carried out in the Iberian Massif, the westernmost outcrop of the European Variscides, and in Alpine belts that exhumed this Massif (Cantabrian Mountains and Spanish Central System). These studies targeted the link between the well constrained surface geological knowledge of the orogen and its deep structure. Featuring an almost complete section of the Variscan Orogen, the Iberian Massif outcrop includes: i) the two continents involved in the collision (Laurussia/Avalonia represented by the external South Portuguese Zone, and Gondwana represented by the Central Iberian, Galicia Tras-os-Montes, West-Asturian Leone and Cantabrian zones), ii) some peri-Gondwana terranes (represented by the Ossa-Morena Zone), and iii) the sutures between them all. Four datasets (ESCIN, IBERSEIS, ALCUDIA and CIMDEF) have sampled the Iberian's Massif external and internal zones, and together they reveal four major discontinuities, three of which are observed across the entire orogen. These are the Conrad, Moho, and Hales discontinuities. The Conrad discontinuity appears as a detachment zone between the upper and the lower crust. It features a smooth geometry varying in depth from 4-5 s TWT in the external zones to 7-8 s TWT in the internal part of the Central Iberian Zone, where late Variscan extension remobilized the crust and redefined its depth. Although this discontinuity has been reactivated during the Alpine orogeny at least in the Cantabrian zone, its geometry is mostly late-Variscan. The Moho discontinuity varies from 9 s TWT in the internal zones, to 14-15 s in areas reactivated by the Alpine orogeny (Cantabrian Mountains and Spanish Central System). Also, remnants of the Variscan imbrication between the Ossa Morena and Central Iberian Zones are observed in the southern Iberian Massif, indicating that re-equilibration of the Moho was not complete at the end of the Paleozoic orogeny. The Hales discontinuity has been observed from the southernmost part of the Iberian Massif to its central part, i.e, in the mantle underlying Avalonia and Gondwana. It appears as a 2-3 s (TWT) reflective band, mostly observed at long offsets (>180 km) in wide-angle records and located at depths that vary from 60 to 80 km in models. Its image in the CIMDEF profile is probably the best example that controlled source data has provided of this discontinuity worldwide. Its geometry is smooth and does not seem to be affected by the Alpine orogeny. Finally, the lithosphere-astenosphere boundary (LAB) has also been locally imaged in the wide-angle dataset of the ALCUDIA profile. Although in this area it has been modelled at 90-100 km depth, seismic data does not allow to picture its geometry beyond this profile, and thus, no age can be deduced from its geometry. As of now, the "Big Four" lithospheric discontinuities have been observed in the Iberi three of them appear and are continuous across the Variscan suture between Laurussia and Gondwana, constraining a lower limit for its age. In addition, two of them have been affected by the Alpine orogeny redefining its geometry without modifying its character, as no thermal events have taken place since the Permian. The outstanding image that the Conrad and the Hales discontinuity have in the Iberian Massif allows to define their attributes in an effort to identify them worldwide., Data acquisition was funded by projects GEO 90-0660 (CICYT), 1FD1997-2179/RYEN1 (CICYTFEDER), GL2007-63101/BTE and CGL2014-56548-P (MICINN). Research has also been suppported by EU grants 8711212 (EPOS-SP), 170522 (SERA), and EIT17024 (SIT4ME)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

The INDEPTH-I Deep seismic profile in Himalayan Orogen: Views on the structure and leucogranites emplacement

  • Li, Hongqiang
  • Gao, Rui
  • Lu, Zhanwu
  • Carbonell, Ramón
In the first phase of the InterNational DEep Profiling of Tibet and the Himalaya the INDEPTH project an over 90 km long deep seismic reflection profile was acquired. This was an interdisciplinary program of geophysical and geological studies focus to increase the understanding of the internal architecture and mechanics of the Himalaya-Tibet region. Reprocessing of INDEPTH-I deep seismic reflection image resolves the South Tibetan Detachment System (STDS) as composed by few laterally displaced ramp structures. These can be interpreted to be structurally related to the outcropping gneiss domes. The STDS is recognized as complex extensional shear zone most probably coeval with the emplacement of the leucogranitic bodies. Geologic data indicates that the latter are pre-, syn- and post- kinematic with the deformation and are generally controlled by the system of detachment faults (including the STDS). The interpreted STDS is broken up, and the individual segments are tilted revealing compressional deformation. Underneath, and down to 42 km depth, two prominent high amplitude, multi cyclic, north dipping events are imaged: the Tethyan Himalayan Sequence (THS) and, the Greater Himalayan Sequence (GHS). Above the GHS the north-dipping reflection fabrics appear imbricate and are seldom interrupted by weak/transparent zones. The existing geological knowledge and the geometrical relationships (unraveled by the internal architecture constrained by the seismic image suggest that the transparent areas in the GHS could be indicative of leucogranite emplacements. Thus, the latter can be interpreted as the product of rapid exhumation of the upper GHS together with magma along the High Himalayan Thrust (HHT), repeated in-situ remelting due to strain heating by exhumation of the lower GHS and Lesser Himalayan Sequence (LHS), and extension of the South Tibetan Detachment System (STDS). This mechanism is consistent with interpretation of seismically transparent zones as the seismic response of granitic plutons., Data acquisition was funded by projects GEO 90-0660 (CICYT), 1FD1997-2179/RYEN1 (CICYTFEDER), GL2007-63101/BTE and CGL2014-56548-P (MICINN). Research has also been suppported by EU grants 8711212 (EPOS-SP), 170522 (SERA), and EIT17024 (SIT4ME)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Alpine deformation mechanisms along central and north Iberia Peninsula: a wide-angle seismic cross-section

  • DeFelipe, Irene
  • Ayarza, Puy
  • Palomeras, Imma
  • Ruiz, Mario
  • Andrés, Juvenal
  • Carbonell, Ramón
Orogen formation in tectonic plates boundaries and deformation transfer to the plate¿s interior to build intraplate mountain belts are processes that contribute to define topography and delineate continent/ocean transitions. The crustal deformation mechanisms that govern these processes vary deeply according to different tectonic settings and on superimposed tectonic phases. The central and northern Iberian Peninsula comprises from north to south: 1) the partially inverted passive continental North Iberian Margin (NIM), 2) the Cantabrian Mountains (CM) formed in the norther boundary of the Iberian subplate during the Alpine orogeny, and 3) an intraplate mountain range, the Spanish-Portuguese Central System (SPCS), located at ca. 200 km to the south of the CM. Additionally, the CM and SPCS are separated by the Duero Cenozoic basin which represents an elevated plateau (~800 m), whereas to the south of the SPCS, the Madrid Cenozoic basin is located at ¿ 400 m altitude. Here, we present a 650-km long crustal-scale cross-section from the NIM to the south of the Madrid Cenozoic basin based on hyperbolic moveout processing of wide-angle seismic reflection/refraction data and on the reinterpretation of previous P-wave velocity models. Our data show an asymmetry of the Moho reflections at both sides of the SPCS and deep subvertical reflectors to the south of the SPCS that we interpret as the image of south-vergent crustal-scale thick-skinned thrusts. This contrasts with the deformation pattern of the CM, where deformation is decoupled between the upper and lower crust and only the Iberian lower crust subducts to the north down at least 40 km depth. This crustal architecture results from the inversion during the Alpine compression of inherited structures and weakness zones: mid-Cretaceous extensional detachments in the NIM and CM; and late- to post-Variscan granitoid intrusion that prompted crustal-scale fault nucleation in the contact with the country rocks in the SPCS. The Conrad discontinuity, separating the upper and lower crust, was assimilated during granitoid intrusion in the late-Variscan extension and played a major role in the different patterns used to accommodate deformation from the Iberian subplate¿s boundary towards the interior and partly resulting in the different altitude of the SPCS foreland basins., This study was supported by: The Spanish National Research Program under grants (CGL2014-56548-P; CGL2016-81964-REDE), the Generalitat de Catalunya (2017-SGR-1022) and the Junta de Castilla y León (SA084P20).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A crustal-scale section of central and NW Iberia: Deformation mechanisms and transfer during the Alpine compression

  • DeFelipe, Irene
  • Ayarza, P.
  • Palomeras, Imma
  • Ruiz, Mario
  • Andrés, Juvenal
  • Yenes, Mariano
  • Martínez Poyatos, David J.
  • Carbonell, Ramón
Tectonic inversion of continental passive margins, orogens formation and deformation transfer to build intraplate ranges are processes that shape plate boundaries, define topography, and delineate continent/ocean transitions. However, the crustal deformation mechanisms that govern these processes vary depending on the tectonic setting and on the overlap of successive tectonic phases. The central and NW Iberian Peninsula comprises from north to south: (i) the North Iberian Margin (NIM), a partly inverted passive margin with limited oceanic subduction, (ii) the Cantabrian Mountains (CM), formed in the northern boundary of the Iberian microplate, and (iii) the Spanish-Portuguese Central System (SPCS), an intraplate mountain range. With the aim of unraveling the crustal-scale structure and the deformation mechanisms in these areas, we present a 650-km long cross-section from the NIM to the south of the Madrid Cenozoic basin based on new wide-angle seismic reflection/refraction data and on the reinterpretation of P-wave velocity (Vp) models. The hyperbolic moveout seismic data revealed an asymmetry of the PmP phases (Moho reflections) at both sides of the SPCS and deep subvertical reflectors to the south of the SPCS, that we interpreted as the image of south-vergent crustal-scale faults. In contrast, in the CM the Vp models presented show the northwards subduction of the Iberian lower crust. Therefore, the deformation mechanisms that govern the current crustal architecture in the central and NW Iberian Peninsula are a crustal-coupled deformation with significant vertical displacement in the SPCS and a crustal-decoupled deformation with mainly horizontal displacement in the CM., This study was supported by: Spanish National Plan for Scientific and Technical Research and Innovation under grants (CGL2014-56548-P; CGL2016-81964-REDE), the Generalitat de Catalunya (2017-SGR-1022) and the Junta de Castilla y León (SA084P20)., Peer reviewed