Skip to main content

DESARROLLO DE MODELOS DE SIMULACION AVANZADOS CON BASE FISICA PARA PROCESOS HIDRAULICOS Y GEOFISICOS

CGL2015-66114-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Simulación numérica con RiverFlow2D de posibles soluciones de mitigación de avenidas en el tramo medio del río Ebro, RiverFlow2D numerical simulation of flood mitigation solutions in the Ebro River

  • Echeverribar, I.
  • Morales-Hernández, M.
  • Lacasta, A.
  • Brufrau, P.
  • García-Navarro, P.
[EN] A study of measures oriented to flood mitigation in the mid reach of the Ebro river is presented: elimination of vegetation in the riverbed, use of controlled flooding areas and construction or re-adaptation of levees. The software used is RiverFlow2D which solves the conservative free-surface flow equations with a finite volume method running on GPU. The results are compared with measurements at gauge stations and aerial views. The most effective measure has turned out to be the elimination of vegetation in the riverbed. It is demonstrated that not only the maximum flooded area is narrower but also it reduces the water depth up to 1 m. The other measures have local consequences when the peak discharge is relatively high although they could be useful in case the discharge is lower, [ES] En este trabajo se presenta un estudio de medidas orientadas a la mitigación de avenidas en el tramo medio del río Ebro: limpieza de vegetación del cauce, uso de zonas de inundación controlada y construcción o re-adaptación de motas. Para ello se utiliza el software RiverFlow2D que resuelve las ecuaciones conservativas del flujo de superficie libre con un método de volúmenes finitos realizando los cálculos sobre GPU. Se comparan los resultados con medidas en estaciones de aforo e información extraída de ortofotos. La medida más efectiva, de las analizadas, ha resultado ser la eliminación de la vegetación en el cauce. Se demuestra que no sólo el área máxima inundada es menor en todo el tramo sino que también reduce la altura de agua hasta en 1 m. El resto de medidas tienen consecuencias locales y de poca entidad cuando los caudales pico son altos, aunque podrían resultar de utilidad para avenidas con caudales más bajos., Este trabajo se encuentra en el marco del proyecto de investigación CGL2015-66114-R financiado por el Ministerio de Ciencia e Innovación/FEDER. Los autores quieren agradecer también a la Confederación Hidrográfica del Ebro por su disponibilidad de consulta y gestión de datos.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Diffusion–dispersion numerical discretization for solute transport in 2D transient shallow flows

  • Morales-Hernández, Mario
  • Murillo, J.
  • García-Navarro, Pilar
18 Pags.- 8 Figs.- 3 Tabls., The 2D solute transport equation can be incorporated into the 2D shallow water equations in order to solve both flow and solute interactions in a coupled system of equations. In order to solve this system, an explicit finite volume scheme based on Roe’s linearization is proposed. Moreover, it is feasible to decouple the solute transport equation from the hydrodynamic system in a conservative way. In this case, the advection part is solved in essence defining a numerical flux, allowing the use of higher order numerical schemes. However, the discretization of the diffusion–dispersion terms have to be carefully analysed. In particular, time-step restrictions linked to the nature of the solute equation itself as well as the numerical diffusion associated to the numerical scheme used are question of interest in this work. These improvements are tested in an analytical case as well as in a laboratory test case with a passive solute (fluorescein) released from a reservoir. Experimental measurements are compared against the numerical results obtained with the proposed model and a sensitivity analysis is carried out, confirming an agreement with the longitudinal coefficients and an underestimation of the transversal ones, respectively., This work was partially funded by the MINECO/FEDER under research project CGL2015-66114-R and by Diputación General de Aragón, DGA, through Fondo Europeo de Desarrollo Regional, FEDER., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Use of internal boundary conditions for levees representation: application to river flood management

  • Echeverribar, Isabel
  • Morales-Hernández, Mario
  • Brufau, Pilar
  • García-Navarro, Pilar
19 Pags.- 10 Figs.- 3 Tabls., River floods can be simulated with the 2D shallow water system of equations using finite volume methods, where the terrain is discretized in cells that form the computational mesh. Usually a proper treatment of wet/dry fronts is required. River levees can be modelled as part of the topography by means of sufficiently small cells of higher elevation than the rest of the bed level in locally refined meshes. This procedure is associated with a large computational time since the time step depends directly on the cell size. The alternative proposed in this work includes the levees as internal boundary conditions in the 2D numerical scheme. In particular, levees have been defined by a weir law that, depending on the relative values of water surface levels on both sides, can formulate the discharge for different situations (i.e. free flow and submerged flow). In addition, having identified numerical difficulties in cases of low discharge under free flow conditions, a novel procedure to avoid oscillations has been developed and called volume transport method. The validation and comparison between methods has been carried out with benchmark test cases and, in addition, with a real flood event in the Ebro River (Spain), This work was partially funded by the MINECO/FEDER under research Project CGL2015-66114-R and by Diputacion General de Aragon, DGA, through Fondo Europeo de Desarrollo Regional, FEDER. The third author also wants to thank to the MINECO for his Research Grant DI-14-06987., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The shallow water equations and their application to realistic cases

  • García-Navarro, Pilar
  • Murillo, J.
  • Fernández-Pato, J.
  • Echeverribar, Isabel
  • Morales-Hernández, Mario
18 Pags.- 11 Figs.- 2 Tabls., The numerical modelling of 2D shallow flows in complex geometries involving transient flow and movable boundaries has been a challenge for researchers in recent years. There is a wide range of physical situations of environmental interest, such as flow in open channels and rivers, tsunami and flood modelling, that can be mathematically represented by first-order non-linear systems of partial differential equations, whose derivation involves an assumption of the shallow water type. Shallow water models may include more sophisticated terms when applied to cases of not pure water floods, such as mud/debris floods, produced by landslides. Mud/debris floods are unsteady flow phenomena in which the flow changes rapidly, and the properties of the moving fluid mixture include stop and go mechanisms. The present work reports on a numerical model able to solve the 2D shallow water equations even including bed load transport over erodible bed in realistic situations involving transient flow and movable flow boundaries. The novelty is that it offers accurate and stable results in realistic problems since an appropriate discretization of the governing equations is performed. Furthermore, the present work is focused on the importance of the computational cost. Usually, the main drawback is the high computational effort required for obtaining accurate numerical solutions due to the high number of cells involved in realistic cases. However, the proposed model is able to reduce computer times by orders of magnitude making 2D applications competitive and practical for operational flood prediction. Moreover our results show that high performance code development can take advantage of general purpose and inexpensive Graphical Processing Units, allowing to run almost 100 times faster than old generation codes in some cases., This work was partially funded by the MINECO/FEDER under research project CGL2015-66114-R and by Diputacion General de Aragon, DGA, through Fondo Europeo de Desarrollo Regional, FEDER. The third author also wants to thank to the MINECO for his Research Grant DI-14-06987., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A 1D numerical model for the simulation of unsteady and highly erosive flows in rivers

  • Martínez-Aranda, S.
  • Murillo, J.
  • García-Navarro, Pilar
27 figures, 7 tables.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/, This work is focused on a numerical finite volume scheme for the coupled shallow water-Exner system in 1D applications with arbitrary geometry. The mathematical expressions modeling the hydrodynamic and morphodynamic components of the physical phenomenon are treated to deal with cross-section shape variations and empirical solid discharge estimations. The resulting coupled equations can be rewritten as a non-conservative hyperbolic system with three moving waves and one stationary wave to account for the source terms discretization. Moreover, the wave celerities for the coupled morpho-hydrodyamical system depend on the erosion-deposition mechanism selected to update the channel cross-section profile. This influence is incorporated into the system solution by means of a new parameter related to the channel bottom variation celerity. Special interest is put to show that, even for the simplest solid transport models as the Grass law, to find a linearized Jacobian matrix of the system can be a challenge in presence of arbitrary shape channels. In this paper a numerical finite volume scheme is proposed, based on an augmented Roe solver, first order accurate in time and space, dealing with solid transport flux variations caused by the channel geometry changes. Channel cross-section variations lead to the appearance of a new solid flux source term which should be discretized properly. The stability region is controlled by wave celerities together with a proper reconstruction of the approximate local Riemann problem solution, enforcing positive values for the intermediate states of the conserved variables. Comparison of the numerical results for several analytical and experimental cases demonstrates the effectiveness, exact well-balancedness and accuracy of the scheme., This work was partially funded by the MINECO/FEDER under research project CGL2015-66114-R and by Diputacion General de Aragon, DGA, through Fondo Europeo de Desarrollo Regional, FEDER., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Depth-averaged unsteady RANS simulation of resonant shallow flows in lateral cavities using augmented WENO-ADER schemes

  • Navas-Montilla, A.
  • Juez, Carmelo
  • Franca, M. J.
  • Murillo, J.
Turbulent shallow flows are characterized by the presence of horizontal large-scale vortices, caused by local variations of the velocity field. Apart from these 2D large vortices, small scale 3D turbulence, mainly produced by the interaction of the flowing water with the solid boundaries, is also present. The energy spectrum of turbulent shallow flows shows the presence of a 2D energy cascade at low wave numbers and a 3D energy cascade at high wave numbers, with a well-defined separation region between them. Horizontal flow movements (e.g. 2D large-scale vortical structures) at low wave numbers mostly determine the hydrodynamic behavior of these flows. Moreover, the generation of standing waves often occurs closely associated to the interaction of 2D horizontal flows with lateral boundaries, this is the case of seiches. To adequately reproduce these phenomena, a mathematical and numerical model able to resolve 2D turbulence is required. We herein show that depth-averaged (DA) unsteady Reynolds averaged Navier Stokes (URANS) models based on the Shallow Water Equations (SWE) are a suitable choice for the resolution of turbulent shallow flows with sufficient accuracy in an affordable computational time. The 3D small-scale vortices are modeled by means of diffusion terms, whereas the 2D large-scales are resolved. A high order numerical scheme is required for the resolution of 2D large eddies. In this work, we design a DA-URANS model based on a high order augmented WENO-ADER scheme. The mathematical model and numerical scheme are validated against observation of complex experiments in an open channel with lateral cavities that involve the presence of resonant phenomena (seiching). The numerical results evidence that the model accurately reproduces both longitudinal and transversal resonant waves and provides an accurate description of the flow field. The high order WENO-ADER scheme combined with a SWE model allows to obtain a powerful, reliable and efficient URANS simulation tool., The present work has been partially funded by Gobierno de Aragón through the Fondo Social Europeo (T32-17R). This research has also been supported by the Research Project CGL2015-66114-R, funded by the Spanish Ministry of Economy and Competitiveness (MINECO)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Improved Riemann solvers for an accurate resolution of 1D and 2D shock profiles with application to hydraulic jumps

  • Navas-Montilla, A.
  • Murillo, J.
From the early stages of CFD, the computation of shocks using Finite Volume methods has been a very challenging task as they often prompt the generation of numerical anomalies. Such anomalies lead to an incorrect and unstable representation of the discrete shock profile that may eventually ruin the whole solution. The two most widespread anomalies are the slowly-moving shock anomaly and the carbuncle, which are deeply addressed in the literature in the framework of homogeneous problems, such as Euler equations. In this work, the presence of the aforementioned anomalies is studied in the framework of the 1D and 2D SWE and novel solvers that effectively reduce both anomalies, even in cases where source terms dominate the solution, are presented. Such solvers are based on the augmented Roe (ARoe) family of Riemann solvers, which account for the source term as an extra wave in the eigenstructure of the system. The novel method proposed here is based on the ARoe solver in combination with: (a) an improved flux extrapolation method based on a previous work, which circumvents the slowly-moving shock anomaly and (b) a contact wave smearing technique that avoids the carbuncle. The resulting method is able to eliminate the slowly-moving shock anomaly for 1D steady cases with source term. When dealing with 2D cases, the novel method proves to handle complex shock structures composed of hydraulic jumps over irregular bathymetries, avoiding the presence of the aforementioned anomalies., The present work has been partially funded by the Aragón Government through the Fondo Social Europeo (T32-17R). This research has also been supported by the Research Project CGL2015-66114-R, funded by the Spanish Ministry of Economy and Competitiveness (MINECO)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A comparative analysis of capacity and non-capacity formulations for the simulation of unsteady flows over finite-depth erodible beds

  • Martínez-Aranda, S.
  • Murillo, J.
  • García-Navarro, Pilar
24 figures, 10 tables.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0, Finite-depth sediment layers are common in natural water bodies. The presence of underlying bedrock strata covered by erodible bed layers is ubiquitous in rivers and estuaries. In the last years, the development of models based on the non-capacity sediment transport assumption, also called non-equilibrium assumption, has offered a new theoretical background to deal with complex non-erodible bed configurations and the associated numerical problems. Bedload non-capacity sediment transport models consider that the actual solid transport state can be different from the equilibrium state and depending on the temporal evolution of the flow. The treatment of finite-depth erodible bed layers, i.e. partially erodible beds, in bedload models based on the equilibrium approach has usually been made using numerical fixes, which correct the unphysical results obtained in some cases. Generally, the presence of a finite-depth erodible layer implies the introduction of a kind of non-equilibrium condition in the bedload transport state. Nevertheless, this common natural bed configuration has not been previously considered in the development of numerical models. In this work, a finite volume model (FVM) for bedload transport based on non-capacity approach and dealing with finite-depth erodible layers is proposed. New expressions for the actual bedload transport rate and the net exchange flux through the static-moving bed layers interface are used to develop a numerical scheme which solves the coupled shallow water and non-capacity bedload transport system of equations. The reconstruction of the intermediate states for the local Riemann problem at each intercell edge is designed to correctly model the presence of non-erodible strata, avoiding the appearance of unphysical results in the approximate solution without reducing the time step. The new coupled scheme is tested against laboratory benchmarking experiments in order to demonstrate its stability and accuracy, pointing out the properties of both equilibrium and non-equilibrium formulations., This work was partially funded by the MINECO/FEDER under research project CGL2015-66114-R and by Diputacion General de Aragon, DGA, through Fondo Europeo de Desarrollo Regional, FEDER., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Finite volume model for the simulation of 1D unsteady river flow and water quality based on the WASP

  • Gordillo, Geovanny
  • Morales-Hernández, Mario
  • García-Navarro, Pilar
15 figures, 7 tables.-- Supplementary information available., In this work, a one-dimensional (1D) finite volume numerical model for the unsteady simulation of the flow hydrodynamics and water quality is developed. The water dynamics is formulated with the 1D shallow water equations, and the water quality evolution is described by the Water Quality Analysis Simulation Program (WASP) model, allowing us to interpret and predict the transport and fate of various biochemical substances along any river reach. This combined system is solved with an explicit finite volume scheme based on Roe's linearization for the advection component of both the flow and the solute transport equations. The proposed model is able to consider temporal variations in tributaries and abstractions occurring in the river basin. This feature is transcendent in order to predict the chemical composition of natural water bodies during winter and summer periods, leading to an improvement in the agreement between computed and observed water quality evolutions. The combined model has been evaluated using literature tests in a steady state and a real-field case of the Ebro river (Spain), characterized by a marked unsteady regime. In the real case, we found that the water temperature was very sensitive to both the solar radiation and the average air temperature, requiring a careful calibration of these parameters. The numerical results are also demonstrated to be reasonably accurate, conservative and robust in real-scale field cases, showing that the model is able to predict the evolution of quality parameters as well as hydrodynamic variables in complex scenarios., The author is grateful to the University of Zaragoza and Banco Santander grant (convocatoria de ayudas de movilidad para latinoamericanos 2016–2017) for the support granted. This work is also a part of the project CGL2015-66114-R granted by the Spanish Ministry of Science and Competitiveness (MINECO)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Simulación de avenidas mediante un modelo hidráulico/hidrológico distribuido en un tramo urbano del río Ginel (Fuentes de Ebro)

  • Fernández-Pato, J.
  • Sánchez-Insa, A.
  • García-Navarro, Pilar
17 figuras, 2 tablas., En las últimas décadas, la simulación de diferentes procesos hidráulicos/hidrológicos ha constituido una herramienta de gran utilidad tanto en la prevención de riesgos como en la gestión de sus consecuencias. La predicción de caudales, calados y manchas de inundación para distintos episodios de ondas de avenida permite valorar la situación con antelación y proporciona información útil a la hora de tomar medidas de contención como, por ejemplo, la colocación óptima de diques para evitar o paliar daños. En este trabajo, se describe la aplicación de un modelo distribuido de simulación hidráulica basado en las ecuaciones 2D de aguas poco profundas a la simulación de ondas de avenida en un tramo urbano del río Ginel (Fuentes de Ebro). Mediante este modelo, se pueden obtener resultados de calado de agua y velocidad en cualquier punto del dominio de cálculo. El código está diseñado para aprovechar la potencia de las tarjetas gráficas (GPU) de última generación, proporcionando una simulación ágil y precisa y constituya el motor de cálculo del programa RiverFlow2D. Los resultados obtenidos permiten valorar las consecuencias de varias riadas con períodos de retorno de hasta 500 años., El presente trabajo está parcialmente financiado por el Gobierno de Aragón mediante el Fondo Social Europeo. Esta investigación también ha sido apoyada por el Proyecto de Investigación CGL2015-66114-R del Ministerio de Economía y Competitividad (MINECO). El autor principal también desea agradecer al MINECO por su beca de investigación DI-14-06987., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Simulación numérica con RiverFlow2D de posibles soluciones de mitigación de avenidas en el tramo medio del río Ebro

  • Echeverribar Pérez, Isabel
  • Morales-Hernández, M.
  • Lacasta, A.
  • Brufau, P.
  • García-Navarro, P.
En este trabajo se presenta un estudio de medidas orientadas a la mitigación de avenidas en el tramo medio del río Ebro: limpieza de vegetación del cauce, uso de zonas de inundación controlada y construcción o re-adaptación de motas. Para ello se utiliza el software RiverFlow2D que resuelve las ecuaciones conservativas del flujo de superficie libre con un método de volúmenes finitos realizando los cálculos sobre GPU. Se comparan los resultados con medidas en estaciones de aforo e información extraída de ortofotos. La medida más efectiva, de las analizadas, ha resultado ser la eliminación de la vegetación en el cauce. Se demuestra que no sólo el área máxima inundada es menor en todo el tramo sino que también reduce la altura de agua hasta en 1 m. El resto de medidas tienen consecuencias locales y de poca entidad cuando los caudales pico son altos, aunque podrían resultar de utilidad para avenidas con caudales más bajos. A study of measures oriented to flood mitigation in the mid reach of the Ebro river is presented: elimination of vegetation in the riverbed, use of controlled flooding areas and construction or re-adaptation of levees. The software used is RiverFlow2D which solves the conservative free-surface flow equations with a finite volume method running on GPU. The results are compared with measurements at gauge stations and aerial views. The most effective measure has turned out to be the elimination of vegetation in the riverbed. It is demonstrated that not only the maximum flooded area is narrower but also it reduces the water depth up to 1 m. The other measures have local consequences when the peak discharge is relatively high although they could be useful in case the discharge is lower.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A comprehensive explanation and exercise of the source terms in hyperbolic systems using Roe type solutions. Application to the 1D-2D shallow water equations

  • Murillo, J.
  • Navas-Montilla, A.
Powerful numerical methods have to consider the presence of source terms of different nature, that intensely compete among them and may lead to strong spatiotemporal variations in the flow. When applied to shallow flows, numerical preservation of quiescent equilibrium, also known as the well-balanced property, is still nowadays the keystone for the formulation of novel numerical schemes. But this condition turns completely insufficient when applied to problems of practical interest. Energy balanced methods (E-schemes) can overcome all type of situations in shallow flows, not only under arbitrary geometries, but also with independence of the rheological shear stress model selected. They must be able to handle correctly transient problems including modeling of starting and stopping flow conditions in debris flow and other flows with a non-Newtonian rheological behavior. The numerical solver presented here satisfies these properties and is based on an approximate solution defined in a previous work. Given the relevant capabilities of this weak solution, it is fully theoretically derived here for a general set of equations. This useful step allows providing for the first time an E-scheme, where the set of source terms is fully exercised under any flow condition involving high slopes and arbitrary shear stress. With the proposed solver, a Roe type first order scheme in time and space, positivity conditions are explored under a general framework and numerical simulations can be accurately performed recovering an appropriate selection of the time step, allowed by a detailed analysis of the approximate solver. The use of case-dependent threshold values is unnecessary and exact mass conservation is preserved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Overcoming numerical shockwave anomalies using energy balanced numerical schemes. Application to the Shallow Water Equations with discontinuous topography

  • Navas-Montilla, A.
  • Murillo, J.
When designing a numerical scheme for the resolution of conservation laws, the selection of a particular source term discretization (STD) may seem irrelevant whenever it ensures convergence with mesh refinement, but it has a decisive impact on the solution. In the framework of the Shallow Water Equations (SWE), well-balanced STD based on quiescent equilibrium are unable to converge to physically based solutions, which can be constructed considering energy arguments. Energy based discretizations can be designed assuming dissipation or conservation, but in any case, the STD procedure required should not be merely based on ad hoc approximations. The STD proposed in this work is derived from the Generalized Hugoniot Locus obtained from the Generalized Rankine Hugoniot conditions and the Integral Curve across the contact wave associated to the bed step. In any case, the STD must allow energy-dissipative solutions: steady and unsteady hydraulic jumps, for which some numerical anomalies have been documented in the literature. These anomalies are the incorrect positioning of steady jumps and the presence of a spurious spike of discharge inside the cell containing the jump. The former issue can be addressed by proposing a modification of the energy-conservative STD that ensures a correct dissipation rate across the hydraulic jump, whereas the latter is of greater complexity and cannot be fixed by simply choosing a suitable STD, as there are more variables involved. The problem concerning the spike of discharge is a well-known problem in the scientific community, also known as slowly-moving shock anomaly, it is produced by a nonlinearity of the Hugoniot locus connecting the states at both sides of the jump. However, it seems that this issue is more a feature than a problem when considering steady solutions of the SWE containing hydraulic jumps. The presence of the spurious spike in the discharge has been taken for granted and has become a feature of the solution. Even though it does not disturb the rest of the solution in steady cases, when considering transient cases it produces a very undesirable shedding of spurious oscillations downstream that should be circumvented. Based on spike-reducing techniques (originally designed for homogeneous Euler equations) that propose the construction of interpolated fluxes in the untrustworthy regions, we design a novel Roe-type scheme for the SWE with discontinuous topography that reduces the presence of the aforementioned spurious spike. The resulting spike-reducing method in combination with the proposed STD ensures an accurate positioning of steady jumps, provides convergence with mesh refinement, which was not possible for previous methods that cannot avoid the spike.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Development of a new simulation tool coupling a 2D finite volume overland flow model and a drainage network model

  • Fernández-Pato, J.
  • García-Navarro, P.
Numerical simulation of mixed flows combining free surface and pressurized flows is a practical tool to prevent possible flood situations in urban environments. When dealing with intense storm events, the limited capacity of the drainage network conduits can cause undesirable flooding situations. Computational simulation of the involved processes can lead to better management of the drainage network of urban areas. In particular, it is interesting to simultaneuously calculate the possible pressurization of the pipe network and the surface water dynamics in case of overflow. In this work, the coupling of two models is presented. The surface flow model is based on two-dimensional shallow water equations with which it is possible to solve the overland water dynamics as well as the transformation of rainfall into runoff through different submodels of infiltration. The underground drainage system assumes mostly free surface flow that can be pressurized in specific situations. The pipe network is modeled by means of one-dimensional sections coupled with the surface model in specific regions of the domain, such as drains or sewers. The numerical techniques considered for the resolution of both mathematical models are based on finite volume schemes with a first-order upwind discretization. The coupling of the models is verified using laboratory experimental data. Furthermore, the potential usefulness of the approach is demonstrated using real flooding data in a urban environment.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Improved Riemann solvers for an accurate resolution of 1D and 2D shock profiles with application to hydraulic jumps

  • Navas Montilla, Adrián
  • Murillo Castarlenas, Javier
From the early stages of CFD, the computation of shocks using Finite Volume methods has been a very challenging task as they often prompt the generation of numerical anomalies. Such anomalies lead to an incorrect and unstable representation of the discrete shock profile that may eventually ruin the whole solution. The two most widespread anomalies are the slowly-moving shock anomaly and the carbuncle, which are deeply addressed in the literature in the framework of homogeneous problems, such as Euler equations. In this work, the presence of the aforementioned anomalies is studied in the framework of the 1D and 2D SWE and novel solvers that effectively reduce both anomalies, even in cases where source terms dominate the solution, are presented. Such solvers are based on the augmented Roe (ARoe) family of Riemann solvers, which account for the source term as an extra wave in the eigenstructure of the system. The novel method proposed here is based on the ARoe solver in combination with: (a) an improved flux extrapolation method based on a previous work, which circumvents the slowly-moving shock anomaly and (b) a contact wave smearing technique that avoids the carbuncle. The resulting method is able to eliminate the slowly-moving shock anomaly for 1D steady cases with source term. When dealing with 2D cases, the novel method proves to handle complex shock structures composed of hydraulic jumps over irregular bathymetries, avoiding the presence of the aforementioned anomalies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Implicit finite volume simulation of 2D shallow water flows in flexible meshes

  • Fernández-Pato, J.
  • Morales-Hernández, M.
  • García-Navarro, P.
In this work, an implicit method for solving 2D hyperbolic systems of equations is presented, focusing on the application to the 2D shallow water equations. It is based on the first order Roe''s scheme, in the framework of finite volume methods. A conservative linearization is done for the flux terms, leading to a non-structured matrix for unstructured meshes thus requiring iterative methods for solving the system. The validation is done by comparing numerical and exact solutions in both unsteady and steady cases. In order to test the applicability of the implicit scheme to real world situations, a laboratory scale tsunami simulation is carried out and compared to the experimental data. The implicit schemes have the advantage of the unconditional stability, but a quality loss in the transient solution can appear for high CFL numbers. The properties of the scheme are well suited for the simulation of unsteady shallow water flows over irregular topography using all kind of meshes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

2D well-balanced augmented ADER schemes for the Shallow Water Equations with bed elevation and extension to the rotating frame

  • Navas-Montilla, A.
  • Murillo, J.
In this work, an arbitrary order augmented WENO-ADER scheme for the resolution of the 2D Shallow Water Equations (SWE) with geometric source term is presented and its application to other shallow water models involving non-geometric sources is explored. This scheme is based in the 1D Augmented Roe Linearized-ADER (ARL-ADER) scheme, presented by the authors in a previous work and motivated by a suitable compromise between accuracy and computational cost. It can be regarded as an arbitrary order version of the Augmented Roe solver, which accounts for the contribution of continuous and discontinuous geometric source terms at cell interfaces in the resolution of the Derivative Riemann Problem (DRP). The main novelty of this work is the extension of the ARL-ADER scheme to 2 dimensions, which involves the design of a particular procedure for the integration of the source term with arbitrary order that ensures an exact balance between flux fluctuations and sources. This procedure makes the scheme preserve equilibrium solutions with machine precision and capture the transient waves accurately. The scheme is applied to the SWE with bed variation and is extended to handle non-geometric source terms such as the Coriolis source term. When considering the SWE with bed variation and Coriolis, the most relevant equilibrium states are the still water at rest and the geostrophic equilibrium. The traditional well-balanced property is extended to satisfy the geostrophic equilibrium. This is achieved by means of a geometric reinterpretation of the Coriolis source term. By doing this, the formulation of the source terms is unified leading to a single geometric source regarded as an apparent topography. The numerical scheme is tested for a broad variety of situations, including some cases where the first order scheme ruins the solution.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Simulación de avenidas mediante un modelo hidráulico/hidrológico distribuido en un tramo urbano del río Ginel (Fuentes de Ebro)

  • Fernandez Pato, Javier
  • Sánchez, Antonio
  • García-Navarro, Pilar
En las últimas décadas, la simulación de diferentes procesos hidráulicos/hidrológicos ha constituido una herramienta de gran utilidad tanto en la prevención de riesgos como en la gestión de sus consecuencias. La predicción de caudales, calados y manchas de inundación para distintos episodios de ondas de avenida permite valorar la situación con antelación y proporciona información útil a la hora de tomar medidas de contención como, por ejemplo, la colocación óptima de diques para evitar o paliar daños. En este trabajo, se describe la aplicación de un modelo distribuido de simulación hidráulica basado en las ecuaciones 2D de aguas poco profundas a la simulación de ondas de avenida en un tramo urbano del río Ginel (Fuentes de Ebro). Mediante este modelo, se pueden obtener resultados de calado de agua y velocidad en cualquier punto del dominio de cálculo. El código está diseñado para aprovechar la potencia de las tarjetas gráficas (GPU) de última generación, proporcionando una simulación ágil y precisa y constituya el motor de cálculo del programa RiverFlow2D. Los resultados obtenidos permiten valorar las consecuencias de varias riadas con períodos de retorno de hasta 500 años.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Use of internal boundary conditions for levees representation: application to river flood management

  • Echeverribar, I.
  • Morales-Hernández, M.
  • Brufau, P.
  • García-Navarro, P.
River floods can be simulated with the 2D shallow water system of equations using finite volume methods, where the terrain is discretized in cells that form the computational mesh. Usually a proper treatment of wet/dry fronts is required. River levees can be modelled as part of the topography by means of sufficiently small cells of higher elevation than the rest of the bed level in locally refined meshes. This procedure is associated with a large computational time since the time step depends directly on the cell size. The alternative proposed in this work includes the levees as internal boundary conditions in the 2D numerical scheme. In particular, levees have been defined by a weir law that, depending on the relative values of water surface levels on both sides, can formulate the discharge for different situations (i.e. free flow and submerged flow). In addition, having identified numerical difficulties in cases of low discharge under free flow conditions, a novel procedure to avoid oscillations has been developed and called volume transport method. The validation and comparison between methods has been carried out with benchmark test cases and, in addition, with a real flood event in the Ebro River (Spain).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A 1D numerical model for the simulation of unsteady and highly erosive flows in rivers

  • Martínez-Aranda, S.
  • Murillo, J.
  • García-Navarro, P.
This work is focused on a numerical finite volume scheme for the coupled shallow water-Exner system in 1D applications with arbitrary geometry. The mathematical expressions modeling the hydrodynamic and morphodynamic components of the physical phenomenon are treated to deal with cross-section shape variations and empirical solid discharge estimations. The resulting coupled equations can be rewritten as a non-conservative hyperbolic system with three moving waves and one stationary wave to account for the source terms discretization. Moreover, the wave celerities for the coupled morpho-hydrodyamical system depend on the erosion-deposition mechanism selected to update the channel cross-section profile. This influence is incorporated into the system solution by means of a new parameter related to the channel bottom variation celerity. Special interest is put to show that, even for the simplest solid transport models as the Grass law, to find a linearized Jacobian matrix of the system can be a challenge in presence of arbitrary shape channels. In this paper a numerical finite volume scheme is proposed, based on an augmented Roe solver, first order accurate in time and space, dealing with solid transport flux variations caused by the channel geometry changes. Channel cross-section variations lead to the appearance of a new solid flux source term which should be discretized properly. The stability region is controlled by wave celerities together with a proper reconstruction of the approximate local Riemann problem solution, enforcing positive values for the intermediate states of the conserved variables. Comparison of the numerical results for several analytical and experimental cases demonstrates the effectiveness, exact well-balancedness and accuracy of the scheme.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Towards Transient Experimental Water Surfaces: Strengthening Two-Dimensional SW Model Validation

  • Martínez-Aranda, Sergio
  • Fernández-Pato, Javier
  • Caviedes-Voullième, Daniel
  • García-Palacín, Ignacio
  • García-Navarro, Pilar
The measurement and simulation of 2D free-surface shallow flows is carried out in this work. For the experimental study a 3D-sensing device (Microsoft Kinect) is used to measure both steady and transient water surface elevation fields with different flow characteristics. This procedure provides 640x480 px resolution water surface level point clouds with a frequency ranging from 8 Hz to 30 Hz. The experimental measurements are compared with 2D finite volume simulations carried out by means of a robust and well-balanced numerical scheme able to deal with flow regime transitions and wet/dry fronts. A good agreement is found between experimental and numerical results for all the cases studied, demonstrating the capability of the RGB-D sensor to capture the water free-surface position accurately. This new experimental technique, which allows us to obtain 2D water depth fields in open- channel flows, leads to a wide range of promising capabilities in order to validate new shallow water models and to improve their accuracy and performance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Finite volume model for the simulation of 1D unsteady river flow and water quality based on the WASP

  • Gordillo, G.
  • Morales-Hernandez, M.
  • Garcia-Navarro, P.
In this work, a one-dimensional (1D) finite volume numerical model for the unsteady simulation of the flow hydrodynamics and water quality is developed. The water dynamics is formulated with the 1D shallow water equations, and the water quality evolution is described by the Water Quality Analysis Simulation Program (WASP) model, allowing us to interpret and predict the transport and fate of various biochemical substances along any river reach. This combined system is solved with an explicit finite volume scheme based on Roe''s linearization for the advection component of both the flow and the solute transport equations. The proposed model is able to consider temporal variations in tributaries and abstractions occurring in the river basin. This feature is transcendent in order to predict the chemical composition of natural water bodies during winter and summer periods, leading to an improvement in the agreement between computed and observed water quality evolutions. The combined model has been evaluated using literature tests in a steady state and a real-field case of the Ebro river (Spain), characterized by a marked unsteady regime. In the real case, we found that the water temperature was very sensitive to both the solar radiation and the average air temperature, requiring a careful calibration of these parameters. The numerical results are also demonstrated to be reasonably accurate, conservative and robust in real-scale field cases, showing that the model is able to predict the evolution of quality parameters as well as hydrodynamic variables in complex scenarios.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A comparative analysis of capacity and non-capacity formulations for the simulation of unsteady flows over finite-depth erodible beds

  • Martínez-Aranda, S.
  • Murillo, J.
  • García-Navarro, P.
Finite-depth sediment layers are common in natural water bodies. The presence of underlying bedrock strata covered by erodible bed layers is ubiquitous in rivers and estuaries. In the last years, the development of models based on the non-capacity sediment transport assumption, also called non-equilibrium assumption, has offered a new theoretical background to deal with complex non-erodible bed configurations and the associated numerical problems. Bedload non-capacity sediment transport models consider that the actual solid transport state can be different from the equilibrium state and depending on the temporal evolution of the flow. The treatment of finite-depth erodible bed layers, i.e. partially erodible beds, in bedload models based on the equilibrium approach has usually been made using numerical fixes, which correct the unphysical results obtained in some cases. Generally, the presence of a finite-depth erodible layer implies the introduction of a kind of non-equilibrium condition in the bedload transport state. Nevertheless, this common natural bed configuration has not been previously considered in the development of numerical models. In this work, a finite volume model (FVM) for bedload transport based on non-capacity approach and dealing with finite-depth erodible layers is proposed. New expressions for the actual bedload transport rate and the net exchange flux through the static-moving bed layers interface are used to develop a numerical scheme which solves the coupled shallow water and non-capacity bedload transport system of equations. The reconstruction of the intermediate states for the local Riemann problem at each intercell edge is designed to correctly model the presence of non-erodible strata, avoiding the appearance of unphysical results in the approximate solution without reducing the time step. The new coupled scheme is tested against laboratory benchmarking experiments in order to demonstrate its stability and accuracy, pointing out the properties of both equilibrium and non-equilibrium formulations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Towards transient experimental water surfaces: A new benchmark dataset for 2D shallow water solvers

  • Martínez-Aranda, S.
  • Fernández-Pato, J.
  • Caviedes-Voullième, D.
  • García-Palacín, I.
  • García-Navarro, P.
In the past decade, shallow water solvers have dramatically improved both in terms of accuracy and computational power. New mathematical models and numerical schemes have been systematically verified against 1D exact solutions and laboratory experiments. Despite the two-dimensional nature of some of these benchmark tests, none of them reports complete 2D water depth fields, but only a few profiles are measured and reported in the best case. This work reports a new benchmarking dataset for validation of shallow water solvers, in which two-dimensional transient water depth measurements are available for complex steady and transient laboratory flume experiments, ranging from transcritical steady flow to dam-break flows around obstacles and complex beds. The transient water surface was measured using a commercial-grade RGB-D sensing device which allows to capture a succession of color-coded point clouds at a high frequency. These experimental measurements are compared with 2D shallow water simulations carried out with an extensively tested finite volume solver. Results asses the suitability of this dataset to perform as benchmark tests, identifying potential limitations of current and future models.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Diffusion–dispersion numerical discretization for solute transport in 2D transient shallow flows

  • Morales-Hernández, M.
  • Murillo, J.
  • García-Navarro, P.
The 2D solute transport equation can be incorporated into the 2D shallow water equations in order to solve both flow and solute interactions in a coupled system of equations. In order to solve this system, an explicit finite volume scheme based on Roe’s linearization is proposed. Moreover, it is feasible to decouple the solute transport equation from the hydrodynamic system in a conservative way. In this case, the advection part is solved in essence defining a numerical flux, allowing the use of higher order numerical schemes. However, the discretization of the diffusion–dispersion terms have to be carefully analysed. In particular, time-step restrictions linked to the nature of the solute equation itself as well as the numerical diffusion associated to the numerical scheme used are question of interest in this work. These improvements are tested in an analytical case as well as in a laboratory test case with a passive solute (fluorescein) released from a reservoir. Experimental measurements are compared against the numerical results obtained with the proposed model and a sensitivity analysis is carried out, confirming an agreement with the longitudinal coefficients and an underestimation of the transversal ones, respectively.