Skip to main content

ESTIMACION DE LA HUMEDAD DEL SUELO EN ZONAS AGRICOLAS A PARTIR DE OBSERVACIONES HIPERTEMPORALES SENTINEL-1: APLICACION EN LA OPTIMIZACION DE LA GESTION DEL RIEGO

CGL2016-75217-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Assessment of atmospheric correction methods for Sentinel-2 images in Mediterranean landscapes

  • Sola Torralba, Ion
  • García-Martín, Alberto
  • Sandonís Pozo, Leire
  • Álvarez-Mozos, Jesús
  • González de Audícana Amenábar, María
Atmospheric correction of optical satellite imagery is an essential pre-processing for modelling biophysical variables, multi-temporal analysis, and digital classification processes. Sentinel-2 products available for users are distributed by the European Space Agency (ESA) as Top Of Atmosphere reflectance values in cartographic geometry (Level-1C product). In order to obtain Bottom Of Atmosphere reflectance images (Level-2A product) derived from this Level-1C products, ESA provides the SEN2COR module, which is implemented in the Sentinel Application Platform. Alternatively, ESA recently distributes Level-2A products processed by SEN2COR with a default configuration. On the other hand, the conversion from Level-1C to Level-2A product can be generated using alternative atmospheric correction methods, such as MAJA, 6S, or iCOR. In this context, this paper aims to evaluate the quality of Level-2A products obtained through different methods in Mediterranean shrub and grasslands by comparing data obtained from Sentinel-2 imagery with field spectrometry data. For that purpose, six plots with different land covers (asphalt, grass, shrub, pasture, and bare soil) were analyzed, by using synchronous imagery to fieldwork (from July to September 2016). The results suggest the suitability of the applied atmospheric corrections, with coefficients of determination higher than 0.90 and root mean square error lower than 0.04 achieving a relative error in bottom of atmosphere reflectance of only 2–3%. Nevertheless, minor differences were observed between the four tested methods, with slightly varying results depending on the spectral band and land cover., This work has been supported by the SynerTGE project (CGL2015-69095-R), funded by the Spanish Ministry of Economy and Competitiveness; the HyZCP project (2015-17), funded by the Centro Universitario de la Defensa de Zaragoza, and projects CGL2016-75217-R (MINECO/FEDER, EU) and PyrenEOS EFA 048/15, which has been 65% cofinanced by the European Regional Development through the Interreg V-A Spain-France-Andorra programme (POCTEFA 2014-2020).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Crop type mapping based on Sentinel-1 backscatter time series

  • Arias Cuenca, María
  • Campo-Bescós, Miguel
  • Álvarez-Mozos, Jesús
The high revisit time of Sentinel-1 (S1) observations enables the design of crop type mapping approaches exploiting the backscatter time series observed for the different crops. The objective of this study is to propose a supervised crop classification methodology based on the temporal signature of crops. With this aim 29 dual-pol S1 observations acquired over an agricultural area of Spain, where ground truth was available, were processed. The classification approach was based on the temporal signatures obtained for each polarization channel (VH, VV and the cross-pol ratio) for the different crops. Highest accuracies were obtained when fields were assigned to the class that minimized the RMSE, with an overall accuracy of 79% and best results for rapeseed, sunflower, alfalfa and barley., This work was partly funded by project CGL2016-75217-R (MINECO/FEDER, EU) and project PyrenEOS EFA 048/15, the latter has been 65% cofinanced by the European Regional Development Fund (ERDF) through the Interreg V-A Spain-France Andorra programme POCTEFA 2014-2020).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

On the influence of acquisition geometry in backscatter time series over wheat

  • Arias Cuenca, María
  • Campo-Bescós, Miguel
  • Álvarez-Mozos, Jesús
Dense time series of Sentinel-1 imagery are an invaluable information source for agricultural applications. Multiple orbits can observe a specific area and their combination could improve the temporal resolution of the time series. However, the orbits have different acquisition geometries regarding incidence and azimuth angles that need to be considered. Furthermore, crops are dynamic canopies and the influence of incidence and azimuth angles might change during the agricultural season due to different phenological stages. The main objective of this letter is to evaluate the influence of different acquisition geometries in Sentinel-1 backscatter time series over wheat canopies, and to propose a strategy for their correction. A large dataset of wheat parcels (∼40,000) was used and 344 Sentinel-1 images from three relative orbits were processed during two agricultural seasons. The first analysis was a monthly evaluation of the influence of incidence angle on backscatter (σ0) and terrain flattened backscatter (γ0). It showed that terrain flattening significantly reduced the backscatter dependence on incidence angle, being negligible in VH polarization but not completely in VV polarization. Incidence angle influence in VV backscatter changed in time due to wheat growth dynamics. To further reduce it, an incidence angle normalization technique followed by an azimuthal anisotropy correction were applied. In conclusion, γ0 enabled a reasonable combination of different relative orbits, that may be sufficient for many applications. However, for detailed analyses, the correction techniques might be implemented to further reduce orbit differences, especially in bare soil periods or winter months., This work was supported by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund (MINECO/FEDER-UE) through projects [CGL2016-75217-R and PID2019-107386RB-I00 / AEI / 10.13039/501100011033] and doctoral grant [BES-2017-080560].
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Crop classification based on temporal signatures of Sentinel-1 observations over Navarre province, Spain

  • Arias Cuenca, María
  • Campo-Bescós, Miguel
  • Álvarez-Mozos, Jesús
Crop classification provides relevant information for crop management, food security assurance and agricultural policy design. The availability of Sentinel-1 image time series, with a very short revisit time and high spatial resolution, has great potential for crop classification in regions with pervasive cloud cover. Dense image time series enable the implementation of supervised crop classification schemes based on the comparison of the time series of the element to classify with the temporal signatures of the considered crops. The main objective of this study is to investigate the performance of a supervised crop classification approach based on crop temporal signatures obtained from Sentinel-1 time series in a challenging case study with a large number of crops and a high heterogeneity in terms of agro-climatic conditions and field sizes. The case study considered a large dataset on the Spanish province of Navarre in the framework of the verification of Common Agricultural Policy (CAP) subsidies. Navarre presents a large agro-climatic diversity with persistent cloud cover areas, and therefore, the technique was implemented both at the provincial and regional scale. In total, 14 crop classes were considered, including different winter crops, summer crops, permanent crops and fallow. Classification results varied depending on the set of input features considered, obtaining Overall Accuracies higher than 70% when the three (VH, VV and VH/VV) channels were used as the input. Crops exhibiting singularities in their temporal signatures were more easily identified, with barley, rice, corn and wheat achieving F1-scores above 75%. The size of fields severely affected classification performance, with ~14% better classification performance for larger fields (>1 ha) in comparison to smaller fields (<0.5 ha). Results improved when agro-climatic diversity was taken into account through regional stratification. It was observed that regions with a higher diversity of crop types, management techniques and a larger proportion of fallow fields obtained lower accuracies. The approach is simple and can be easily implemented operationally to aid CAP inspection procedures or for other purposes. © 2020 by the authors., This work was supported by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund (MINECO/FEDER-UE) through a project (CGL2016-75217-R) and a grant (BES-2017-080560). It was also partly founded by project PyrenEOS EFA 048/15, that has been 65% cofinanced by the European Regional Development Fund (ERDF) through the Interreg V-A Spain-France-Andorra programme (POCTEFA 2014-2020).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

Comparison of digital terrain models obtained with LiDAR and photogrammetry

  • Martínez de Aguirre Escobar, Alejandro
  • García Morales, Víctor
  • Álvarez-Mozos, Jesús
Airborne LiDAR sensors capture three-dimensional information of the Earth, useful for obtaining high accuracy Digital Terrain Models (DTM). The Spanish National Plan for Aerial Orthophotography (PNOA) is an initiative of the Spanish Geographical Institute whereby nationwide LiDAR datasets are periodically acquired and made available to the public as.las files and value added products (e.g., DTM). The objective of this study is to assess the added value of PNOA LiDAR DTMs by comparing them to DTMs obtained through classical photogrammetric techniques. With this aim, four areas of interest were selected in Navarre (north of Spain), in areas with challenging characteristics such as forests, karst landforms, agricultural terraces and ravines. A 5 × 5 m DTM obtained with classical photogrammetry in 2008 was compared with a LiDAR DTM of the same pixel size obtained in 2011, assuming no significant changes occurred in this time. Height differences were evaluated, as well as slope, aspect and curvature differences. Besides, a multiresolution analysis was carried out to quantify how DTM smoothing affected height variations between neighbor pixels, measured with the standard deviation on a 5 × 5 window. The results obtained showed that the LiDAR DTMs provided an enhanced description of topography, particularly under forests and in areas with complex topography., The research work reported here was partly funded by project CGL2016-75217-R (MINECO/FEDER, EU).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Contribución de congreso (ConferenceOutput)

On the influence of spatial resolution in soil surface roughness characterization using Tls and Sfm techniques

  • Martínez de Aguirre Escobar, Alejandro
  • Álvarez-Mozos, Jesús
  • Giménez Díaz, Rafael
  • Milenković, Milutin
  • Pfeifer, Norbert
Soil surface roughness strongly affects the scattering of microwaves and determines the backscattering coefficient observed by SAR (Synthetic Aperture Radar) sensors. The aim of this study is to analyze the influence of the spatial resolution of Terrestrial Laser Scanner (TLS) and Structure from Motion (SfM) techniques to parameterize surface roughness over agricultural soils. Three experimental plots (5 x 5 meters) representing different roughness conditions were measured by TLS and SfM techniques. Roughness parameters (s and l) were calculated from profiles obtained at different spatial resolutions in parallel and in perpendicular to the tillage direction on each plot. The results showed minor differences in the parameters values between both techniques and, in general, a decreasing trend and an increasing trend for lower spatial resolutions for parameter s and l, respectively., This work was partly funded by project CGL2016-75217-R (MINECO/FEDER, EU).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Evaluation of terrestrial laser scanner and structure from motion photogrammetry techniques for quantifying soil surface roughness parameters over agricultural soils

  • Martínez de Aguirre Escobar, Alejandro
  • Álvarez-Mozos, Jesús
  • Milenković, Milutin
  • Pfeifer, Norbert
  • Giménez Díaz, Rafael
The surface roughness of agricultural soils is mainly related to the type of tillage performed, typically consisting of oriented and random components. Traditionally, soil surface roughness (SSR) characterization has been difficult due to its high spatial variability and the sensitivity of roughness parameters to the characteristics of the instruments, including its measurement scale. Recent advances in surveying have greatly improved the spatial resolution, extent, and availability of surface elevation datasets. However, it is still unknown how new roughness measurements relates with the conventional roughness measurements such as 2D profiles acquired by laser profilometers. The objective of this study was to evaluate the suitability of Terrestrial Laser Scanner (TLS) and Structure from Motion (SfM) photogrammetry techniques for quantifying SSR over different agricultural soils. With this aim, an experiment was carried out in three plots (5 × 5 m) representing different roughness conditions, where TLS and SfM photogrammetry measurements were co‐registered with 2D profiles obtained using a laser profilometer. Differences between new and conventional roughness measurement techniques were evaluated visually and quantitatively using regression analysis and comparing the values of six different roughness parameters. TLS and SfM photogrammetry measurements were further compared by evaluating multi‐directional roughness parameters and analyzing corresponding Digital Elevation Models. The results obtained demonstrate the ability of both TLS and SfM photogrammetry techniques to measure 3D SSR over agricultural soils. However, profiles obtained with both techniques (especially SfM photogrammetry) showed a loss of high‐frequency elevation information that affected the values of some parameters (e.g. initial slope of the autocorrelation function, peak frequency and tortuosity). Nevertheless, both TLS and SfM photogrammetry provide a massive amount of 3D information that enables a detailed analysis of surface roughness, which is relevant for multiple applications, such as those focused in hydrological and soil erosion processes and microwave scattering., This work was supported in part by the Spanish Ministry of Economy and Competitiveness under Grant BES‐2012‐054521, Project CGL2011‐24336, Project CGL2015‐64284‐C2‐1‐R, and Project CGL2016‐75217‐R (MINECO/FEDER, EU).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Tesis doctoral (DoctoralThesis)

Sentinel-1 time series applications over agricultural fields: proposal, evaluation and comparison of different methodologies

  • Arias Cuenca, María
La monitorización de los cultivos es esencial para diferentes aplicaciones, como el aseguramiento de la seguridad alimentaria, la gestión de los cultivos y la implementación de políticas agrarias. La teledetección proporciona información acerca de las propiedades biofísicas de las plantas y los suelos, así como de la variabilidad espacial en amplias áreas del territorio de forma periódica. El lanzamiento de los satélites radar de apertura sintética (SAR) Sentinel-1 en 2014 y 2016 permitió la adquisición de series temporales densas de imágenes con buena resolución espacial y temporal incluso en zonas cubiertas de nubes. El principal objetivo de esta tesis es la evaluación de diferentes metodologías para aplicaciones agrícolas a escala de parcela usando series temporales Sentinel-1. En primer lugar, se propuso una metodología de clasificación de cultivos supervisada basada en las firmas temporales de Sentinel-1. Se implementó en un caso de estudio con 14 clases de cultivos y un dataset grande de parcelas agrícolas. En segundo lugar, se evaluó la influencia de la geometría de adquisición de las imágenes Sentinel-1 sobre parcelas de trigo. Se evaluó la influencia del ángulo de incidencia en la retrodispersión y los coeficientes de terrain-flattening, y se aplicó una normalización del ángulo de incidencia seguida de una corrección de la anisotropía azimutal en las series temporales de polarización VV. En tercer lugar, se evaluó la atenuación de la retrodispersión producida por las cubiertas de trigo en polarización VV, y un nuevo método de corrección del efecto de la atenuación llamado WATCOR fue propuesto. Finalmente, cuatro técnicas para estimar la humedad del suelo basadas en series temporales de Sentinel-1 en cultivo de trigo fueron evaluadas, proponiendo diferentes alternativas metodológicas para su aplicación a escala de parcela. A pesar de la complejidad de la estimación de la humedad del suelo a escala de parcela únicamente con datos SAR, se obtuvieron estimaciones aceptables. Los resultados de esta tesis demostraron que el análisis y la extracción de información contenida en series temporales SAR es útil para diferentes aplicaciones, augurando interesantes desarrollos futuros en este campo., Crop monitoring is essential for different applications such as food security assurance, crop management, and the design and implementation of agricultural policies. Remote sensing provides information about biophysical properties of plants and soils and their spatial variability on large areas of the territory on a periodic basis. The launch of Sentinel-1 synthetic aperture radar (SAR) satellites in 2014 and 2016 made possible the acquisition of dense time series of images with good spatial resolution and temporal resolution even in cloud-covered areas. The main objective of this thesis is the evaluation of different methodologies for agricultural applications at the field scale using Sentinel-1 time series. First, a supervised crop classification methodology based on time signatures from Sentinel-1 images was proposed and implemented in a case study with 14 crop classes and a large dataset of agricultural fields. Secondly, the influence of acquisition geometry of Sentinel-1 images over wheat fields was assessed. The influence of the incidence angle on backscatter coefficients and terrain-flattened coefficients was evaluated, and an incidence angle normalization followed by an azimuthal anisotropy correction were applied to VV polarized time series. Thirdly, the backscatter attenuation produced by wheat canopy in VV polarization was evaluated, and a new wheat attenuation correction methodology named WATCOR was proposed. Finally, four different soil moisture (SM) estimation techniques based on Sentinel-1 time series were evaluated over wheat fields, proposing different methodological alternatives for their application at the field scale. Despite the complexity of estimating SM at the field scale solely with SAR data, acceptable estimations were obtained. The results of this thesis showed that the analysis and extraction of the information contained in SAR time series is useful for various agricultural applications, foreshadowing exciting future developments in this field., This work was supported by the Spanish Ministry and Competitiveness and the European Regional Development Fund (MINECO/FEDER) through a project (CGL2016-75217-R) and a pre-doctoral grant (BES-2017-080560). It was also supported by the Spanish Ministry of Science and Innovation under Project PID2019-107386RB-I00/ AEI/10.13039/501100011033., Programa de Doctorado en Ciencias y Tecnologías Industriales (RD 99/2011), Industria Zientzietako eta Teknologietako Doktoretza Programa (ED 99/2011)