Skip to main content

MODELIZACION FOTOQUIMICA PARA ATRIBUIR FUENTES Y AREAS DE EMISION A ALTAS CONCENTRACIONES DE MATERIAL PARTICULADO EN ZONAS URBANAS DE ESPAÑA

CGL2016-75725-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre BARCELONA SUPERCOMPUTING CENTER CENTRO NACIONAL DE SUPERCOMPUTACION

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ozone source apportionment during peak summer events over southwestern Europe

  • Pay, María Teresa
  • Gangoiti, G.
  • Guevara, Marc
  • Napelenok, Sergey L.
  • Querol, Xavier
  • Jorbal, Oriol
  • Pérez García-Pando, Carlos
It is well established that in Europe, high O3 concentrations are most pronounced in southern/Mediterranean countries due to the more favourable climatological conditions for its formation. However, the contribution of the different sources of precursors to O3 formation within each country relative to the imported (regional and hemispheric) O3 is poorly quantified. This lack of quantitative knowledge prevents local authorities from effectively designing plans that reduce the exceedances of the O3 target value set by the European air quality directive. O3 source attribution is a challenge because the concentration at each location and time results not only from local biogenic and anthropogenic precursors, but also from the transport of O3 and precursors from neighbouring regions, O3 regional and hemispheric transport and stratospheric O3 injections. The main goal of this study is to provide a first quantitative estimation of the contribution of the main anthropogenic activity sectors to peak O3 events in Spain relative to the contribution of imported (regional and hemispheric) O3. We also assess the potential of our source apportionment method to improve O3 modelling. Our study applies and thoroughly evaluates a countrywide O3 source apportionment method implemented in the CALIOPE air quality forecast system for Spain at high resolution (4 × 4 km2) over a 10-day period characterized by typical summer conditions in the Iberian Peninsula (IP). The method tags both O3 and its gas precursor emissions from source sectors within one simulation, and each tagged species is subject to the typical physico-chemical processes (advection, vertical mixing, deposition, emission and chemistry) as the actual conditions remain unperturbed. We quantify the individual contributions of the largest NOx local sources to high O3 concentrations compared with the contribution of imported O3. We show, for the first time, that imported O3 is the largest input to the ground-level O3 concentration in the IP, accounting for 46 %-68% of the daily mean O3 concentration during exceedances of the European target value. The hourly imported O3 increases during typical northwestern advections (70 %-90 %, 60-80 μgm-3), and decreases during typical stagnant conditions (30 %-40 %, 30-60 μgm-3) due to the local NO titration. During stagnant conditions, the local anthropogenic precursors control the O3 peaks in areas downwind of the main urban and industrial regions (up to 40% in hourly peaks). We also show that ground-level O3 concentrations are strongly affected by vertical mixing of O3-rich layers present in the free troposphere, which result from local/regional layering and accumulation, and continental/hemispheric transport. Indeed, vertical mixing largely explains the presence of imported O3 at ground level in the IP. Our results demonstrate the need for detailed quantification of the local and remote contributions to high O3 concentrations for local O3 management, and show O3 source apportionment to be an essential analysis prior to the design of O3 mitigation plans in any non-attainment area. Achieving the European O3 objectives in southern Europe requires not only ad hoc local actions but also decided national and European-wide strategies. © Author(s) 2019., Acknowledgements. This study has been supported by the Spanish Ministry of Economy and Competitiveness and FEDER funds under the PAISA (CGL2016-75725-R) project. This work was granted access to the high performance computer resources of the “Red Española de Supercomputación” (AECT-2017-1-0008). The views expressed in this article are those of the authors and do not necessarily represent the views or policies of the US Environmental Protection Agency. Carlos Pérez García-Pando acknowledges long-term support from the AXA Research Fund, as well as the support received through the Ramón y Cajal programme (grant no. RYC-2015-18690) of the Spanish Ministry of Economy and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Unravelling the Origin of High Ozone Concentrations in Southwestern Europe

  • Pay, María Teresa
  • Pérez-García Pando, Carlos
  • Guevara, Marc
  • Jorba, Oriol
  • Napelenok, Sergey
  • Querol, Xavier
This study aims to quantify the contributions to surface ozone (O3) concentration in the Iberian Peninsula (IP) from the main NOx emission sectors in the region along with the imported O3 during a 10-day episode. The work applies an Integrated Source Apportionment Method within the CALIOPE air quality system at 4-km resolution. This study finds that the imported O3 is overall the larger contribution to its surface concentration. Contributions from local/regional sources are decisive in the O3 peaks downwind of main nitrogen oxides (NOx) hotspots in the IP under stagnant conditions., This study was supported by the Spanish Ministry of Economy and Competitiveness and FEDER funds under the project PAISA (CGL2016-75725-R) and the “Red Española de Supercomputación” (AECT-2017-1-0008). The views expressed in this article are those of the authors and do not necessarily represent the views or policies of the U.S. Environmental Protection Agency., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

HERMESv3, a stand-alone multi-scale atmospheric emission modelling framework-Part 2: The bottom-up module

  • Guevara, M.
  • Tena, C.
  • Porquet, M.
  • Jorba, O.
  • Pérez García-Pando, C.
We describe the bottom-up module of the High-Elective Resolution Modelling Emission System version 3 (HERMESv3), a Python-based and multi-scale modelling tool intended for the processing and computation of atmospheric emissions for air quality modelling. HERMESv3 is composed of two separate modules: the global-regional module and the bottom-up module. In a companion paper (Part 1, Guevara et al., 2019a) we presented the global-regional module. The bottom-up module described in this contribution is an emission model that estimates anthropogenic emissions at high spatial-(e.g. road link level, ) and temporal-(hourly) resolution using state-of-the-art calculation methods that combine local activity and emission factors along with meteorological data. The model computes bottom-up emissions from point sources, road transport, residential and commercial combustion, other mobile sources, and agricultural activities. The computed pollutants include the main criteria pollutants (i.e. NOx , CO, NMVOCs (nonmethane volatile organic compounds), SOx , NH3, PM10 and PM2:5) and greenhouse gases (i.e. CO2 and CH4, only related to combustion processes). Specific emission estimation methodologies are provided for each source and are mostly based on (but not limited to) the calculation methodologies reported by the European EMEP/EEA air pollutant emission inventory guidebook. Meteorologically dependent functions are also included to take into account the dynamical component of the emission processes. The model also provides several functionalities for automatically manipulating and performing spatial operations on georeferenced objects (shapefiles and raster files). The model is designed so that it can be applicable to any European country or region where the required input data are available. As in the case of the global-regional module, emissions can be estimated on several user-defined grids, mapped to multiple chemical mechanisms and adapted to the input requirements of different atmospheric chemistry models (CMAQ, WRF-Chem and MONARCH) as well as a street-level dispersion model (RLINE). Specific emission outputs generated by the model are presented and discussed to illustrate its capabilities.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Ozone source apportionment during peak summer events over southwestern Europe

  • Pay, Maria Teresa
  • Gangoiti, Gotzon
  • Guevara Vilardell, Marc
  • Napelenok, Sergey
  • Querol, Xavier
  • Jorba, Oriol
  • Pérez García-Pando, Carlos
It is well established that in Europe, high O3 concentrations are most pronounced in southern/Mediterranean countries due to the more favourable climatological conditions for its formation. However, the contribution of the different sources of precursors to O3 formation within each country relative to the imported (regional and hemispheric) O3 is poorly quantified. This lack of quantitative knowledge prevents local authorities from effectively designing plans that reduce the exceedances of the O3 target value set by the European air quality directive. O3 source attribution is a challenge because the concentration at each location and time results not only from local biogenic and anthropogenic precursors, but also from the transport of O3 and precursors from neighbouring regions, O3 regional and hemispheric transport and stratospheric O3 injections. The main goal of this study is to provide a first quantitative estimation of the contribution of the main anthropogenic activity sectors to peak O3 events in Spain relative to the contribution of imported (regional and hemispheric) O3. We also assess the potential of our source apportionment method to improve O3 modelling. Our study applies and thoroughly evaluates a countrywide O3 source apportionment method implemented in the CALIOPE air quality forecast system for Spain at high resolution (4 × 4 km2) over a 10-day period characterized by typical summer conditions in the Iberian Peninsula (IP). The method tags both O3 and its gas precursor emissions from source sectors within one simulation, and each tagged species is subject to the typical physico-chemical processes (advection, vertical mixing, deposition, emission and chemistry) as the actual conditions remain unperturbed. We quantify the individual contributions of the largest NOx local sources to high O3 concentrations compared with the contribution of imported O3. We show, for the first time, that imported O3 is the largest input to the ground-level O3 concentration in the IP, accounting for 46 %–68 % of the daily mean O3 concentration during exceedances of the European target value. The hourly imported O3 increases during typical northwestern advections (70 %–90 %, 60–80 µg m−3), and decreases during typical stagnant conditions (30 %–40 %, 30–60 µg m−3) due to the local NO titration. During stagnant conditions, the local anthropogenic precursors control the O3 peaks in areas downwind of the main urban and industrial regions (up to 40 % in hourly peaks). We also show that ground-level O3 concentrations are strongly affected by vertical mixing of O3-rich layers present in the free troposphere, which result from local/regional layering and accumulation, and continental/hemispheric transport. Indeed, vertical mixing largely explains the presence of imported O3 at ground level in the IP. Our results demonstrate the need for detailed quantification of the local and remote contributions to high O3 concentrations for local O3 management, and show O3 source apportionment to be an essential analysis prior to the design of O3 mitigation plans in any non-attainment area. Achieving the European O3 objectives in southern Europe requires not only ad hoc local actions but also decided national and European-wide strategies., This study has been supported by the Spanish Ministry of Economy and Competitiveness and FEDER funds under the PAISA (CGL2016-75725-R) project. This work was granted access to the high performance computer resources of the “Red Española de Supercomputación” (AECT-2017-1-0008). The views expressed in this article are those of the authors and do not necessarily represent the views or policies of the US Environmental Protection Agency. Carlos Pérez García-Pando acknowledges longterm support from the AXA Research Fund, as well as the support received through the Ramón y Cajal programme (grant no. RYC-2015-18690) of the Spanish Ministry of Economy and Competitiveness., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

HERMESv3, a stand-alone multi-scale atmospheric emission modelling framework – part 2: the bottom–up module

  • Guevara Vilardell, Marc
  • Tena, Carles
  • Porquet, Manuel
  • Jorba Casellas, Oriol
  • Pérez García-Pando, Carlos
We describe the bottom–up module of the High-Elective Resolution Modelling Emission System version 3 (HERMESv3), a Python-based and multi-scale modelling tool intended for the processing and computation of atmospheric emissions for air quality modelling. HERMESv3 is composed of two separate modules: the global_regional module and the bottom_up module. In a companion paper (Part 1, Guevara et al., 2019a) we presented the global_regional module. The bottom_up module described in this contribution is an emission model that estimates anthropogenic emissions at high spatial- (e.g. road link level,) and temporal- (hourly) resolution using state-of-the-art calculation methods that combine local activity and emission factors along with meteorological data. The model computes bottom–up emissions from point sources, road transport, residential and commercial combustion, other mobile sources, and agricultural activities. The computed pollutants include the main criteria pollutants (i.e. NOx, CO, NMVOCs (non-methane volatile organic compounds), SOx, NH3, PM10 and PM2.5) and greenhouse gases (i.e. CO2 and CH4, only related to combustion processes). Specific emission estimation methodologies are provided for each source and are mostly based on (but not limited to) the calculation methodologies reported by the European EMEP/EEA air pollutant emission inventory guidebook. Meteorologically dependent functions are also included to take into account the dynamical component of the emission processes. The model also provides several functionalities for automatically manipulating and performing spatial operations on georeferenced objects (shapefiles and raster files). The model is designed so that it can be applicable to any European country or region where the required input data are available. As in the case of the global_regional module, emissions can be estimated on several user-defined grids, mapped to multiple chemical mechanisms and adapted to the input requirements of different atmospheric chemistry models (CMAQ, WRF-Chem and MONARCH) as well as a street-level dispersion model (R-LINE). Specific emission outputs generated by the model are presented and discussed to illustrate its capabilities., This research has been supported by the Ministerio de Ciencia, Innovación y Universidades (grant no. CGL2016-75725-R), the Ministerio de Ciencia, Innovación y Universidades (grant no. RTI2018-099894-B-I00), the Ministerio de Ciencia, Innovación y Universidades (grant no. RYC-2015-18690), and the AXA Research Fund (grant no. AXA Research Fund)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

CALIOPE-Urban v1.0: coupling R-LINE with a mesoscale air quality modelling system for urban air quality forecasts over Barcelona city (Spain)

  • Benavides, Jaime
  • Snyder, Michelle
  • Guevara Vilardell, Marc
  • Soret, Albert
  • Pérez García-Pando, Carlos
  • Amato, Fulvio
  • Querol, Xavier
  • Jorba Casellas, Oriol
he NO2 annual air quality limit value is systematically exceeded in many European cities. In this context, understanding human exposure, improving policy and planning, and providing forecasts requires the development of accurate air quality models at the urban (street level) scale. We describe CALIOPE-Urban, a system coupling CALIOPE – an operational mesoscale air quality forecast system based on the HERMES (emissions), WRF (meteorology) and CMAQ (chemistry) models – with the urban roadway dispersion model R-LINE. Our developments have focused on Barcelona city (Spain), but the methodology may be replicated for other cities in the future. WRF drives pollutant dispersion and CMAQ provides background concentrations to R-LINE. Key features of our system include the adaptation of R-LINE to street canyons, the use of a new methodology that considers upwind grid cells in CMAQ to avoid double counting traffic emissions, a new method to estimate local surface roughness within street canyons, and a vertical mixing parameterisation that considers urban geometry and atmospheric stability to calculate surface level background concentrations. We show that the latter is critical to correct the night-time overestimations in our system. Both CALIOPE and CALIOPE-Urban are evaluated using two sets of observations. The temporal variability is evaluated against measurements from five traffic sites and one urban background site for April–May 2013. While both systems show a fairly good agreement at the urban background site, CALIOPE-Urban shows a better agreement at traffic sites. The spatial variability is evaluated using 182 passive dosimeters that were distributed across Barcelona during 2 weeks for February–March 2017. In this case, the coupled system also shows a more realistic distribution than the mesoscale system, which systematically underpredicts NO2 close to traffic emission sources. Overall CALIOPE-Urban improves mesoscale model results, demonstrating that the combination of both scales provides a more realistic representation of NO2 spatio-temporal variability in Barcelona., Jaime Benavides' PhD work is funded by grant BES-2014-070637 from the FPI programme by the Spanish Ministry of the Economy and Competitiveness. Jaime Benavides developed part of this work as a research visitor at the Institute for the Environment at UNC funded by mobility grant EEBB-I-17-12296 from the same ministry. IDAEA-CSIC acknowledges the Barcelona City Council for their support to the experimental campaign. Carlos Pérez García-Pando acknowledges the long-term support from the AXA Chair in Sand and Dust Storms (AXA Research Fund), as well as the support received through the Ramón y Cajal programme (grant RYC-2015-18690) of the Spanish Ministry of Economy and Competitiveness. This research has been supported by the Spanish Ministry of the Economy and Competitiveness (grant nos. CGL2013-46736-R, CGL2016-75725-R and RTI2018-099894-BI00), as well as the Catalan Government (grant no. RIS3CAT-COM15-1-0011-04)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

HERMESv3, a stand-alone multi-scale atmospheric emission modelling framework – Part 1: global and regional module

  • Guevara Vilardell, Marc
  • Tena, Carles
  • Porquet, Manuel
  • Jorba, Oriol
  • Pérez García-Pando, Carlos
Abstract Back to top We present the High-Elective Resolution Modelling Emission System version 3 (HERMESv3), an open source, parallel and stand-alone multi-scale atmospheric emission modelling framework that computes gaseous and aerosol emissions for use in atmospheric chemistry models. HERMESv3 is coded in Python and consists of a global_regional module and a bottom_up module that can be either combined or executed separately. In this contribution (Part 1) we describe the global_regional module, a customizable emission processing system that calculates emissions from different sources, regions and pollutants on a user-specified global or regional grid. The user can flexibly define combinations of existing up-to-date global and regional emission inventories and apply country-specific scaling factors and masks. Each emission inventory is individually processed using user-defined vertical, temporal and speciation profiles that allow obtaining emission outputs compatible with multiple chemical mechanisms (e.g. Carbon-Bond 05). The selection and combination of emission inventories and databases is done through detailed configuration files providing the user with a widely applicable framework for designing, choosing and adjusting the emission modelling experiment without modifying the HERMESv3 source code. The generated emission fields have been successfully tested in different atmospheric chemistry models (i.e. CMAQ, WRF-Chem and NMMB-MONARCH) at multiple spatial and temporal resolutions. In a companion article (Part 2; Guevara et al., 2019) we describe the bottom_up module, which estimates emissions at the source level (e.g. road link) combining state-of-the-art bottom–up methods with local activity and emission factors., The research leading to these results has received funding from the Ministerio de Economía y Competitividad (MINECO) as part of the PAISA project CGL2016-75725-R and the NUTRIENT project CGL2017-88911-R. The authors acknowledge PRACE for awarding access to Marenostrum4 based in Spain at the Barcelona Supercomputing Center through the Tier-0 HHRNTCP and Tier-0 EEDMC projects. Carlos Pérez García-Pando acknowledges long-term support from the AXA Research Fund, as well as the support received through the Ramón y Cajal programme (grant RYC-2015-18690) of the Spanish Ministry of Economy and Competitiveness. The authors would also like to thank the two anonymous referees for their thorough comments, which helped improve the quality of the paper., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Profiling of Saharan dust from the Caribbean to western Africa – Part 2: Shipborne lidar measurements versus forecasts

  • Ansmann, Albert
  • Rittmeister, Franziska
  • Engelmann, Ronny
  • Basart, Sara
  • Benedetti, Angela
  • Spyrou, Christos
  • Skupin, Annett
  • Baars, Holger
  • Seifert, Patric
  • Senf, Fabian
  • Kanitz, Thomas
A unique 4-week ship cruise from Guadeloupe to Cabo Verde in April–May 2013 see part 1, Rittmeister et al. (2017) is used for an in-depth comparison of dust profiles observed with a polarization/Raman lidar aboard the German research vessel Meteor over the remote tropical Atlantic and respective dust forecasts of a regional (SKIRON) and two global atmospheric (dust) transport models (NMMB/BSC-Dust, MACC/CAMS). New options of model–observation comparisons are presented. We analyze how well the modeled fine dust (submicrometer particles) and coarse dust contributions to light extinction and mass concentration match respective lidar observations, and to what extent models, adjusted to aerosol optical thickness observations, are able to reproduce the observed layering and mixing of dust and non-dust (mostly marine) aerosol components over the remote tropical Atlantic. Based on the coherent set of dust profiles at well-defined distances from Africa (without any disturbance by anthropogenic aerosol sources over the ocean), we investigate how accurately the models handle dust removal at distances of 1500 km to more than 5000 km west of the Saharan dust source regions. It was found that (a) dust predictions are of acceptable quality for the first several days after dust emission up to 2000 km west of the African continent, (b) the removal of dust from the atmosphere is too strong for large transport paths in the global models, and (c) the simulated fine-to-coarse dust ratio (in terms of mass concentration and light extinction) is too high in the models compared to the observations. This deviation occurs initially close to the dust sources and then increases with distance from Africa and thus points to an overestimation of fine dust emission in the models., We thank the R/V Meteor team and German Weather Service (DWD) for their support during the cruise M96. We appreciate the effort of AERONET MAN to equip research vessels with sun photometers for atmospheric research. We are grateful to Angela Benedetti (MACC/CAMS model; European Centre for Medium-Range Weather Forecasts, Reading, UK) for all her fruitful comments and suggestion during the initial phase of paper preparation. The SKIRON model operations were supported by the European Commission through the Seventh Framework Programme MARINA platform (Marine Renewable Integrated Application Platform, grant agreement 241402). NMMB/BSC-Dust model simulations were performed in the MareNostrum supercomputer hosted by BSC. Sara Basart and Oriol Jorba acknowledge the CICYT project (CGL2016-75725-R) of the Spanish Government and the AXA Research Fund. The authors also acknowledge support through ACTRIS-2 under grant agreement no. 654109 from the European Union’s Horizon 2020 Research and Innovation Programme., Peer Reviewed, Postprint (published version)