Skip to main content

EMPLEO DE ARCILLAS ESPECIALES (ESMECTITAS, SEPIOLITA, PALIGORSKITA, CAOLINITA Y HALOYSITA) Y ZEOLITAS EN SALUD HUMANA.

CGL2016-80833-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Computational study of the ethomeen surfactant adsorption in phyllosilicates

  • Borrego Sánchez, Ana
  • Gómez-Pantoja, Eulalia
  • Morillo González, Esmeralda
  • Undabeytia López, Tomás
  • Sainz-Díaz, C. Ignacio
Póster presentado en el XVI International Clay Conference from the Oceans to Space Granada, Spain, July 17-21, (2017), Clay minerals, in particular smectites, are low cost materials being abundant in nature. Phyllosilicates have a nanometric interlayer space accessible to water molecules and other compounds. These interlaminar spaces represent about 90% of the mineral total surface yielding a high adsorption capacity for polar molecules. These properties make the phyllosilicates suitable for environmental applications, such as the retention of organics residues in soils, or their use as nanocarriers for controlled release of agrochemicals and also drugs [1,2]. Ethomeen T/15 is a widely used cationic surfactant. Ethomeen T/15 is an amphiphilic molecule that contains both a hydrophobic and hydrophilic part. In addition, surfactant allows preparing aqueous solutions with a high concentration of substances immiscible or partially miscible with water, due to increase their solubilisation. Surfactant molecules can interact with the interlayer space of clays for improving the adsorbent properties of clays, enhancing the adsorption of organic molecules on the montmorillonite surface. Adsorption of Ethomeen T/15 surfactant on montmorillonite showed several loadings due probably to different arrangements within the interlayer space as determined by XRD and FTIR. However, the distribution of the surfactant molecules on the clay surface has still to be elucidated. The aim of this work was to study the adsorption of the surfactant Ethomeen T/15 onto montmorillonite by combining experimental data with molecular modeling. Specifically, molecular modeling calculations using force fields based on empirical interatomic potentials [3] have been applied to a montmorillonite model with several relative contents of this surfactant and water molecules within the interlayer space. Molecular Dynamics simulations showed that the surfactant molecules are likely to be adsorbed in the interlayer space of montmorillonite as monolayers and bilayers. [1] Alromeed A.A., Scrano L., Bufo S.A., Undabeytia T. (2015). Slow-release formulations of the herbicide MCPA by using clay-protein composites. Pest Management Science 71, 1303-1310. [2] Viseras C., Cerezo P., Sánchez R., Salcedo I., Aguzzi C. (2010). Current challenges in clay minerals for drug delivery. Applied Clay Science 48, 291-295. [3] Martos-Villa R., Mata M.P., Sainz-Díaz C.I. (2014). Characterization of CO2 and mixed methane/CO2 hydrates intercalated in smectites by means of atomistic calculations. Journal of Molecular Graphics and Modelling 49, 80-90., this study was supported by the Projects RNM-1897 and CGL2016-80833-R and groups CTS-946 and RNM-363., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Characterization of Venezuelan kaolins as health care ingredients

  • Hernández, Ana C.
  • Sánchez Espejo, Rita
  • Meléndez, Williams
  • González, Gema
  • López-Galindo, A.
  • Viseras, C.
Characterization directed to evaluate health care usefulness of kaolinitic samples from various deposits from the south of Venezuela exploited used as raw materials in ceramics have been done Identity, purity and richness in mineral phases and presence of chemical impurities were compared to pharmaceutical grade kaolins and correlated to international requirements described in pharmacopoeias. Color parameters and textural analysis were used as a complementary characterization of the suitability of the samples as a diluent for pharmaceutical oral dosage forms. Most of the samples would require purification before considering their use as health care ingredients. In particular, treatment to eliminate quartz as a mineral impurity or Pb as metallic impurity would be advisable for some of the studied kaolins. Nevertheless, at least seven of the studied samples could be used directly, as they are comparable to commercial kaolin used as excipients or cosmetic ingredients., Authors gratefully acknowledge Laboratory Technicians of IACT (Spain) and IVIC (Venezuela). The study was financed by the Spanish Project CGL2016-80833R, and by the Andalusian Group CTS-946 and Torres Quevedo Contract (PTQ-15-07625).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chitosan/beidellite nanocomposite as diclofenac carrier

  • Cheikh, Dorsaf
  • García-Villén, Fátima
  • Majdoubd, Hatem
  • Viseras, C.
  • Zayani, M.B.
Chitosan (CS) and purified sodium beidellite (Na-Bd) were used to obtain a nanocomposite able to carry anionic pharmaceutical ingredients. Diclofenac sodium (DS) was chosen as a model drug and was loaded by intercalation solution technique. Solid state characterization of the resultant hybrids was performed, including X-ray diffraction, Fourier transformed infrared spectroscopy, Thermal analysis and high resolution transmission electron microscopy coupled with energy dispersive X-Ray analysis. Drug loading capacity and encapsulation efficiency were quantified by measuring equilibrium concentration by UV–Vis spectroscopy at 276 nm. Solid-state characterization of the samples confirmed both chemical and physical interaction of DS with the nanocomposites. High drug loading along with a modified cumulative release of the drug in simulated intestinal fluid was obtained. The developed clay/polymer hybrids can act as potential candidates for the design of modified dosage forms of anionic drugs., This work was supported by a grant from Tunisian Ministry of Higher Education and Scientific Research. The authors thank the Andalusian group CTS-946 and the CGL2016-80833-R project for providing necessary facilities and financial support for the characterization of the nanocomposites.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Colloidal and thermal behaviors of some venezuelan kaolin pastes for therapeutic applications

  • Hernández, Ana C.
  • Awad, Mahmoud E.
  • Meléndez, Williams
  • González, Gema
  • López-Galindo, Alberto
  • Sánchez Espejo, Rita
  • García-Villén, Fátima
  • Viseras, C.
This work contributes to the knowledge of colloidal and thermal properties of some important primary-originated kaolin deposits from Bolivar State, Venezuela, and their possible use as semisolid formulations in medicinal muds for topical applications. Eight selected high purity kaolin samples were characterized. Rheological and thermal properties were correlated to physicochemical characteristics of the clay suspensions (pH, Ca2+, and Mg2+ cation desorption and surface charge). Most of the studied kaolin pastes showed adequate viscosities, acceptable skin safe pH, and good thermal properties for pelotherapeutic uses. Three of the studied samples, in particular, showed very high kaolinite purities (>92% kaolinite), elevated viscosities (>1 Pa¿s), and good thermal and pH performances for topical application. © 2019 by the authors. Licensee MDPI, Basel, Switzerland. T., This research was funded by Spanish MINECO project (CGL2016-80833R), Junta de Andalucía (group CTS-946) and a grant from the Academic mobility program between institutions (Postgraduate Ibero-American University Association, AUIP).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Complex of chitosan pectin and clay as diclofenac carrier

  • Cheikh, Dorsaf
  • García-Villén, Fátima
  • Majdoubd, Hatem
  • Zayani, M.B.
  • Viseras, C.
The preparation of a new drug delivery system (DDS) based on the combination of two natural polymers chitosan (CS) and high-esterified pectin (HEP) and beidellite (Bd) was proposed. Diclofenac sodium was chosen as model drug and was loaded in the nanocomposite by means of intercalation solution technique. The samples were characterized by X-ray diffraction, Thermal analysis, Infrared spectroscopy and high resolution transmission electron microscopy coupled with energy dispersive X-Ray analysis. Drug loading capacity and encapsulation efficiency of the clay polymer nanocomposite was quantified. UV–Vis spectroscopy (276 nm) was used as the drug quantification technique throughout the whole study. In vitro drug release profile in simulated intestinal fluid was also evaluated. Results demonstrated the formation of diclofenac polymorph during the drug loading process, thus obtaining a new crystal form of the drug possessing different physico-chemical properties with respect to the diclofenac sodium salt form. Moreover, the in vitro release study showed that the bionanocomposite elaborated could form a network aiming for a modified release of diclofenac. Consequently, Na-Bd/CS/HEP nanocomposite proved to be a promising formulation to control anionic drug release process., This work was supported by a grant from the Tunisian Ministry of Higher Education and Scientific Research. The authors thank the Andalusian group CTS-946 and the CGL2016-80833-R project for providing necessary facilities and financial support for the characterization of the nanocomposites.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Crosslinked palygorskite-chitosan beads as diclofenac carriers

  • Yahia, Youcef
  • García-Villén, Fátima
  • Djelad, Amal
  • Belaroui, Lala Setti
  • Sánchez Espejo, Rita
  • Sassi, Mohamed
  • López-Galindo, Alberto
  • Viseras, C.
Beads are versatile spherical drug delivery units that can be coated, filled into capsules or compressed as tablets to be orally administered. Crosslinking of chitosan (CS) and polyanions such as tripolyphosphate (TPP) results in beads with mechanical properties that could be improved by the addition of clay mineral particles to the bead network. Hybrid systems of palygorskite and chitosan have been shown to have advanced properties in biomedical applications as a result of the synergic effects of their combination. In this paper chitosan was intercalated with palygorskite (Pal) and the resultant hybrid was loaded with diclofenac, an anti-inflammatory drug. Chitosan (CS) beads crosslinked with sodium tripolyphosphate (TPP) were prepared and their properties compared to palygorskite/Chitosan (Pal/CS) beads. The synergic effects resulting from the clay/polymer hybrids were evaluated by means of X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning transmission electron microscopy (SEM) and thermal analysis (thermogravimetric analysis, TGA, and differential scanning calorimetry, DSC). The results showed that chitosan and palygorskite interaction took place. Diclofenac sodium (DFNa) was used as model drug to reveal the effects of Pal within the bead structure. DFNa was successfully loaded into beads and FTIR analyses confirmed its presence. A drug release test was carried out in phosphate buffer medium (pH. 6.8). The results indicated that only 33% (w/w) of total drug was released from DFNa-Pal/CS compared to 66% (w/w) from DFNa-CS. The total amount of drug released fell significantly with the addition of palygorskite to the chitosan matrix. Pal/CS beads crosslinked with TPP were shown to be able of carrying diclofenac sodium, meaning they could possibly be used as drug carriers., This research was supported by funding from the Spanish group CTS-946 and projects CGL2016-80833-R and PTQ-15-07625. Youcef Yahia's stay at the Andalusian Institute of Earth Sciences was financed by MESRS ALGERIA.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Genesis of the Eastern Iranian bentonite deposits

  • Modabberi, S.
  • Namayandeh, A.
  • Setti, M.
  • López-Galindo, Alberto
Numerous bentonite deposits are located in Southern Khorasan (Eastern Iran), especially in Ferdows and Sarayan counties. We studied the genesis of these bentonites at seven deposits (Chah-Taleb, Chah-Keshmir, Chah-Golestan, Chah-Pirouz, Gholeh-Gelia, Kharman-Sar and Khal-Kooh) using petrological, mineralogical and geochemical data (including X-ray diffraction and fluorescence, and inductively coupled plasma-mass spectrometry) from both bentonites and parent rock samples. The deposits mainly consist of Na-montmorillonite and opaline silica, with lesser amounts of quartz, feldspars, carbonates, halite, zeolites, and illite. The studied deposits formed in a volcanic arc setting and their magma series are calc-alkaline, except for the Kharman-Sar deposit, which is tholeiitic in composition. The presence of significant amounts of opaline silica indicates a low fluid flow rate in these systems, in spite of the high leaching of alkalis. The strata-bound nature of the studied deposits, as well as the high amount of montmorillonite, the presence of gypsum layers alternating with those of bentonite and the lack of hydrothermal alteration suggest that these Iranian bentonite deposits were formed through diagenetic processes in lagoon environments, by means of the alteration of intermediate to acidic precursors, trachy-andesite to rhyolite, belonging to two volcanic provinces: one pyroclastic realm in Ferdows, and another volcaniclastic in Sarayan., This research was partly funded by the Iran National Science Foundation (contract no. 90004849 ), Spanish Group CTS-946 (Junta de Andalucia) and MINECO project CGL2016-80833-R . We also acknowledge the School of Geology of the University of Tehran for sample preparation and some geochemical tests.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ground Calcium Carbonate as a Low Cost and Biosafety Excipient for Solubility and Dissolution Improvement of Praziquantel

  • Borrego Sánchez, Ana
  • Sánchez Espejo, Rita
  • Albertini, Beatrice
  • Passerini, Nadia
  • Cerezo, Pilar
  • Viseras, C.
  • Sainz-Díaz, C. Ignacio
Calcium carbonate is an abundant mineral with several advantages to be a successful carrier to improve oral bioavailability of poorly water-soluble drugs, such as praziquantel. Praziquantel is an antiparasitic drug classified in group II of the Biopharmaceutical Classification System hence characterized by high-permeability and low-solubility. Therefore, the dissolution rate is the limiting factor for the gastrointestinal absorption that contributes to the low bioavailability. Consequently, the therapeutic dose of the praziquantel must be high and big tablets and capsules are required, which are difficult to swallow, especially for pediatric and elderly patients. Mixtures of praziquantel and calcium carbonate using solid-solid physical mixtures and solid dispersions were prepared and characterized using several techniques (X-ray diffraction differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy, laser diffraction, Fourier transform infrared and Raman spectroscopies). Solubility of these formulations evidenced that the solubility of praziquantel-calcium carbonate interaction product increased in physiological media. In vitro dissolution tests showed that the interaction product increased the dissolution rate of the drug in acidic medium. Theoretical models were studied to understand this experimental behavior. Cytotoxicity and cell cycle studies were performed, showing that praziquantel-calcium carbonate physical mixture and interaction product were biocompatible with the HTC116 cells, because it did not produce a decrease in cell viability or alterations in the cell cycle. © 2019 by the authors. Licensee MDPI, Basel, Switzerland., The authors are thankful to Fatro S.p.A. for donating the praziquantel drug and to Xtrem Biotech, specially Ignacio Molina and Sara Torres, for their contributions with the cytotoxicity and cell cycle experiments. We also acknowledge for financial support the MINECO, for projects FIS2016-77692-C2-2-P and CGL2016-80833-R, and the Andalusian government, for project RNM1897.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Halloysite nanotubes as tools to improve the actual challenge of fixed doses combinations in tuberculosis treatment

  • Carazo, Esperanza
  • Sandri, Giuseppina
  • Cerezo, P.
  • Lanni, Cristina
  • Ferrari, Franca
  • Bonferoni, Cristina
  • Viseras, C.
  • Aguzzi, Carola
Halloysite nanotubes (HLNTs) were used as nanocarriers of the tuberculostatic agent isoniazid (INH), a BCS (Biopharmaceutics Classification System) class III drug. Self-assembling nanohybrids (INH-loaded HLNTs) with an average outer diameter of 90 nm and polydispersity index of 0.7 approximately, were obtained by spontaneous adsorption of INH molecules to HLNTs powder in aqueous medium. The nanohybrids were aimed to improve oral drug bioavailability and reduce physicochemical incompatibility of INH with other concomitantly administered tuberculostatic agents. In vitro drug release from INH-loaded HLNTs was successfully fitted to a diffusive kinetic law founded on the adsorption–desorption equilibrium between drug molecules in solution and solid inorganic excipients. INH-loaded HLNTs showed good in vitro biocompatibility toward Caco-2 cells at the concentrations studied (up to 1233 μg/mL), with improved cell proliferation. Permeability tests showed that INH transport across Caco-2 cellular membranes was greatly enhanced and fluorescent microscopy confirmed that the drug encapsulated into nanohybrid was effectively internalized by the cells. INH-loaded HLNTs enhanced stability of the drug in presence of other tuberculostatic agents, both in binary and quaternary combinations. It has been demonstrated that simple interaction between INH with HLNTs leads to drug permeability and stability improvements that could greatly facilitate the design of multiple drug dosage forms, an actual challenge in oral treatment of tuberculosis. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2019., This study was supported by the Projects CGL2016‐80833‐R and RNM‐1897, group CTS‐946, Predoctoral Grant FPU13/04765 and Predoctoral Mobility Grant EST15/00225 of the FPU Program (Ministerio de Educación, Cultura y Deporte, Spain).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Rheology and cation release of tunisian medina mud-packs intended for topical applications

  • Khiari, Imen
  • Sánchez Espejo, Rita
  • García-Villén, Fátima
  • Cerezo, Pilar
  • Aguzzi, Carola
  • López-Galindo, Alberto
  • Jamoussi, F.
  • Viseras, C.
The medicinal and dermo-cosmetic uses of clays date back to prehistory. Clays mixed with water and different types of mud were used by early humans for healing wounds and skin cleansing. Clays are naturally occurring ingredients in many natural health products, mentioned in many ancient Mediterranean and European medical texts, and currently used to prepare therapeutic hot-mud (peloid) baths at numerous spas in Mediterranean regions. We acquired eleven samples in five Tunisian town markets of green and brown clays traditionally used to prepare homemade mud-packs intended for topical application. These clays were partially characterized in a previous study regarding their mineralogical, chemical, textural and thermal properties. This study aims to evaluate the feasibility of these green and brown clay samples. We present data of pH, zeta potential and in vitro cation release from these inorganic gels. Other properties such as rheology and particle size distribution are also considered to be relevant given the clays' topical administration as cosmetic products., This research was supported by funding from the Spanish Group CTS-946 and projects CGL2016-80833-R, IRSES MEDYNA (PIRSES-GA-2013-612572) and PTQ-15-07625.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Wound Healing Activity of Nanoclay/Spring Water Hydrogels

  • García-Villén, Fátima
  • Faccendini, Angela
  • Miele, Dalila
  • Ruggeri, Marco
  • Sánchez Espejo, Rita
  • Borrego Sánchez, Ana
  • Cerezo, Pilar
  • Rossi, Silvia
  • Viseras, César
  • Sandri, Giuseppina
Background: hydrogels prepared with natural inorganic excipients and spring waters are commonly used in medical hydrology. Design of these clay-based formulations continues to be a field scarcely addressed. Safety and wound healing properties of different fibrous nanoclay/spring water hydrogels were addressed. Methods: in vitro biocompatibility, by means of MTT assay, and wound healing properties were studied. Confocal Laser Scanning Microscopy was used to study the morphology of fibroblasts during the wound healing process. Results: all the ingredients demonstrated to be biocompatible towards fibroblasts. Particularly, the formulation of nanoclays as hydrogels improved biocompatibility with respect to powder samples at the same concentration. Spring waters and hydrogels were even able to promote in vitro fibroblasts motility and, therefore, accelerate wound healing with respect to the control. Conclusion: fibrous nanoclay/spring water hydrogels proved to be skin-biocompatible and to possess a high potential as wound healing formulations. Moreover, these results open new prospects for these ingredients to be used in new therapeutic or cosmetic formulations., This research was funded by Ministerio de Ciencia e Innovación, CGL2016–80833-R; Consejería de Economía, Innovación, Ciencia y Empleo, Junta de Andalucía, P18-RT-3786 and Ministerio de Educación, Cultura y Deporte, FPU15/01577., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Flow and Tableting Behaviors of Some Egyptian Kaolin Powders as Potential Pharmaceutical Excipients

  • Awad, Mahmoud E.
  • López Galindo, Alberto
  • Medarevic, Djordje
  • Đuriš, Jelena
  • El-Rahmany, Mahmoud M.
  • Ibric, Svetlana
  • Viseras, César
The present work aimed at assessing the pharmaceutical tableting properties of some Egyptian kaolin samples belong to the Abu Zenima kaolin deposits (estimated at 120 million tons). Four representative samples were selected based on kaolinite richness and their structural order-disorder degree, and after purification, they were dried at 70 °C and heated from room temperature up to 400 °C (10 °C/min). Mineralogy, micromorphology, microtexture, granulometry, porosimetry, moisture content, bulk and tapped density, direct and indirect flowability, and tableting characteristics are studied. Results indicated that purified kaolin samples were made up of 95–99% kaolinite, <3% illite, 1% quartz and 1% anatase. The powder showed mesoporous character (pore diameters from 2 to 38 nm and total pore volume from 0.064 to 0.136 cm3/g) with dominance of fine nanosized particles (<1 μm–10 nm). The powder flow characteristics of both the ordered (Hinckley Index HI > 0.7, crystallite size D001 > 30 nm) and disordered (HI < 0.7, D001 < 30 nm) kaolinite-rich samples have been improved (Hausner ratio between 1.24 and 1.09) as their densities were influenced by thermal treatment (with some observed changes in the kaolinite XRD reflection profiles) and by moisture content (variable between 2.98% and 5.82%). The obtained tablets exhibited hardness between 33 and 44 N only from the dehydrated powders at 400 °C, with elastic recovery (ER) between 21.74% and 25.61%, ejection stress (ES) between 7.85 and 11.45 MPa and tensile fracture stress (TFS) between 1.85 and 2.32 MPa, which are strongly correlated with crystallinity (HI) and flowability (HR) parameters. These findings on quality indicators showed the promising pharmaceutical tabletability of the studied Egyptian kaolin powders and the optimization factors for their manufacturability and compactability, This work has been funded by the Egyptian Cultural Affairs and Missions Sector (Plan 2013–2014), MinistryofHigherEducation,incollaborationwiththeGroupCTS-946(JuntadeAndalucía)andMINECOproject CGL2016-80833-R (Spain), and the grant funded by Erasmus+ KA1 mobility program 2016/2017., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Natural inorganic ingredients in wound healing

  • García-Villén, Fátima
  • Souza, I.M.S.
  • Barbosa, Raquel de Melo
  • Borrego Sánchez, Ana
  • Ojeda-Riascos, Santiago
  • Viseras, C.
Background: One of the major clinical challenges is to achieve a rapid and efficient treatment of complex chronic wounds. Nowadays, most wound dressings currently available are unable to find a solution to the challenges of resistance to bacterial infection, protein adsorption and increased levels of exudates. Natural inorganic ingredients (clay minerals, metal cations, zeolites, etc.) could be the key to solve the problem satisfactorily. Some of these materials have shown biocompatibility and ability to enhance cell adhesion, proliferation and cellular differentiation and uptake. Besides, some natural inorganic ingredients effectively retain drugs, allowing the design of drug delivery matrices. Objective: Possibilities of natural inorganic ingredients in wound healing treatments have been reviewed, the following sections have been included: 1. Introduction 2. Functions of Inorganic Ingredients in wound healing 2.1. Antimicrobial effects 2.2. Hemostatic effects 3. Clay minerals for wound healing 3.1. Clay minerals 3.2. Clay mineral semisolid formulations 3.3. Clay/polymer composites and nanocomposites 3.4. Clay minerals in wound dressings 4. Other inorganic materials for wound healing 4.1. Zeolites 4.2. Silica and other silicates 4.3. Other minerals 4.4. Transition metals 5. Conclusion Conclusion: Inorganic ingredients possess useful features for the development of chronic wounds advanced treatments. They improve physical (mechanical resistance and water vapor transmission), chemical (release of drugs, hemostasis and/or adsorption of exudates and moisture) and biological (antimicrobial effects and improvement of healing) properties of wound dressings. In summary, inorganic ingredients have proved to be a promising and easily accessible products in the treatment of wounds and, more importantly, chronic wounds., This study was supported by funding from the Spanish group CTS-946, Ph.D. scholarship FPU-2015 (MECD) and project CGL2016-80833-R, Spain.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Design and characterization of spring water hydrogels with natural inorganic excipients

  • García-Villén, Fátima
  • Sánchez Espejo, Rita
  • López-Galindo, Alberto
  • Cerezo, Pilar
  • Viseras, César
An essential first step to deep into the knowledge of the mechanisms of action that underlie the use of clay-based spring water gels is their design and development according to standardized protocols and procedures. Hydrogels with two spring waters and two clay excipients, sepiolite (PS9) and palygorskite (G30), were studied. The excipients were fully characterized as regards their identity, purity and richness, as well as their textural features, cation exchange capacities and zeta-potential. Conductivity, pH and ionic composition of spring waters were also assessed. Rheological and thermal properties of hydrogels were monitored through time. PS9 complied with identity, richness and purity descriptions of “Magnesium silicate” (or “Magnesium trisilicate”) United States and European Pharmacopoeia monographs', whereas G30 satisfied “Attapulgite” monograph. Cooling rates of 10% w/w spring water hydrogels were adequate for topical application as thermotherapic agents. Gel-like systems obtained with PS9 showed higher viscosities and yield values than G30 hydrogels, the type of spring water not exerting significant influence. The properties remained almost constant during a period of 2 months, ensuring quality standards. Longer periods resulted in unforeseeable changes in properties ascribed to water losses., This study was supported by funding from the Spanish group CTS-946, PhD scholarship FPU-2015 (MECD) and projects CGL2016-80833-R and P18-RT-3786.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Molecular interactions of praziquantel drug with nanosurfaces of sepiolite and montmorillonite

  • Borrego Sánchez, Ana
  • Viseras, César
  • Sainz-Díaz, C. Ignacio
Praziquantel drug is nowadays in continuo study to overcome adverse biopharmaceutical properties as drug of first choice for the treatment of the human schistosomiasis. Meanwhile, sepiolite and montmorillonite have been studied experimentally as low-cost nanocarrier to design new praziquantel delivery systems. In this work, the interactions between the drug and clay minerals surfaces are studied at molecular level by computational methods. The optimization of the adsorption of praziquantel in sepiolite nanochannels and in the montmorillonite interlayer space has been studied by using force fields based on empirical interatomic potentials and at quantum mechanical level. The results showed the main interactions between the drug and both clay minerals surfaces at the confined spaces of these minerals, and favorable adsorption energies of the praziquantel-clays complexes were obtained. Therefore, theoretical calculations allow knowing how the drug is adsorbed in the clays and in the case of the montmorillonite how many molecules of the drug are adsorbed in the interlayer space of the mineral according to the experimental data., Authors are thankful to MINECO projects [PCIN-2017-098, FIS2016-77692-C2-2-P and CGL2016-80833-R] and Andalusian projects [RNM1897 and P18-RT-3786] for financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nano-delivery systems based on carvacrol prodrugs and fibrous clays

  • Eusepi, Piera
  • Marinelli, Lisa
  • Borrego Sánchez, Ana
  • García-Villén, Fátima
  • Rayhane, Ben Khalifa
  • Cacciatore, Ivana
  • Viseras, César
  • Di Stefano, Antonio
The fibrous silicates, Palygorskite and Sepiolite, were investigated as low-cost nanocarriers for three carvacrol prodrugs to ameliorate their pharmacokinetic and biopharmaceutic profiles. Adsorption equilibrium studies were performed in order to obtain a drug-clay hybrid system. These hybrid systems were characterized by thermal analysis, X-ray diffraction, and Fourier transform infrared spectroscopy, to study the degree and kind of interactions between the organic and inorganic components. In vitro release and chemical stability of prodrug-clay hybrids were studied in physiological gastrointestinal simulated fluids. The results showed an improvement of the chemical stability of prodrugs in hybrids systems, as well as a sustained release and a retained bioconversion of the prodrugs into the pharmacologically active carvacrol, to improve the antimicrobial activity., This research was funded by MIUR, grant number “FAR2018” and CGL2016-80833-R (Spanish Project) and P18-RT-3786 (Andalusian Project).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Trace and rare earth elements distribution and mobility during diagenetic alteration of volcanic ash to bentonite in Eastern Iranian bentonite deposits

  • Namayandeh, A.
  • Modabberi, S.
  • López Galindo, Alberto
The chemical composition of the source magma along with the physiochemical conditions of the depositional environment are the main controlling factors in determining the behavior and mobility of trace elements and rare earth elements (REEs) during the transformation of volcanic ash to bentonite. The purpose of the present study was to determine the distribution pattern and mobility of trace elements and REEs in several bentonite deposits formed by diagenetic alteration of volcanic ash in shallow alkaline water in eastern Iran. Using geochemical and statistical data, the degree of weathering in the parent rocks and the distribution and mobility of trace elements and REEs during the alteration process at seven deposits (Chah-Taleb, Chah-Keshmir, Chah-Golestan, Chah-Pirouz, Gholeh-Gelia, Kharman-Sar, and Khal-Kooh) were studied. None of the parent rocks showed an advanced degree of depositional reworking and, therefore, their chemical composition is representative of the volcanic ash from which the bentonites were formed. In the chondrite-normalized REE patterns of both parent rocks and bentonites, the light rare earth elements (LREEs) were found to be enriched relative to the heavy rare earth elements (HREEs). The variation in δEu and δCe values suggested a high-temperature (<200°C), suboxic, aquatic environment in which the conversion of volcanic ash to bentonite occurred. In the bivariate correlation analysis, Si showed a strong inverse relationship with Al and LREEs, while large ion lithophile elements (LILEs), high field strength elements (HFSEs), HREEs, and LREEs displayed a positive correlation between the elements of their respective groups. The R values in the binary diagram of potential immobile elements against Al suggest a qualitative classification in which Ti, Gd, Ga, Pr, Tb, Nd, Sm, Ce, and Nb are considered immobile, and U, Dy, In, Sc, Hf, Zr, La, and Eu are considered to have had poor mobility during formation of the Eastern Iranian bentonite deposits., This research was partly funded by the Iran National Science Foundation (contract no. 90004849), Spanish Group CTS-946 (Junta de Andalucia), and MINECO project CGL2016-80833-R. The authors acknowledge the School of Geology of the University of Tehran for sample preparation and some geochemical tests. The authors express their gratitude to Shaghayegh V. Navabpour for assisting with the statistical analyses. They also sincerely thank the reviewers for their careful reading of the manuscript and their many insightful comments and suggestions which certainly helped to improve the manuscript.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Praziquantel-Clays as Accelerated Release Systems to Enhance the Low Solubility of the Drug

  • Borrego Sánchez, Ana
  • Sánchez Espejo, Rita
  • García-Villén, Fátima
  • Viseras, César
  • Sainz-Díaz, C. Ignacio
Praziquantel is an antiparasitic drug indicated for the treatment of the schistosomiasis disease. This drug has very low aqueous solubility, requiring high oral doses for its administration which gives rise to side effects, therapeutic noncompliance and the appearance of resistant forms of the parasite. Clay minerals, like sepiolite and montmorillonite, are innocuous, non-toxic, biocompatible and low-cost excipients. Additionally, clays have high adsorbent properties that allow them to encapsulate drugs in nanometric spaces present in the channels in the case of the sepiolite or between the layers in the case of the montmorillonite. The interactions between the drug and clay minerals are studied experimentally with the strategy for preparing interactions products in organic solvents (ethanol, acetonitrile and dichloromethane) so that the interaction will be more effective and will be enhanced the aqueous solubility of praziquantel. The results showed that in the interaction products, the drug interacted with both clay minerals, which produced the loss of the crystallinity of the drug demonstrated by different techniques. This led to a significant increase in the dissolution rate of the praziquantel in all the interaction products in the simulated gastrointestinal tract media, except for the praziquantel¿montmorillonite product prepared in dichloromethane that presented a controlled release in acid medium. Moreover, in vitro cytotoxicity and cell cycle studies were performed in the interaction products prepared with ethanol. The interaction product with sepiolite was biocompatible with the HTC116 line cells, and it did not produce alterations in the cell cycle. However, interaction products with montmorillonite did not produce cell death, but they showed affectation and damage of cells in the cell cycle study at the highest concentration tested (20¿100 µM). Therefore, the different organic solvents used are adequate for the improvement of the biopharmaceutical profile of praziquantel. Drug¿clay interaction products, specifically with sepiolite, showed very promising results in which new accelerated oral release systems of the praziquantel were obtained, This research was funded by Ministerio de Ciencia e Innovación government, grants numbers PCIN-2017-098, FIS2016-77692-C2-2-P and CGL2016-80833-R and by Consejería de Economía, Innovación, Ciencia y Empleo, Junta de Andalucía government, grants numbers RNM1897 and P18-RT-3786.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced antimicrobial activity and physicochemical stability of rapid pyro-fabricated silver-kaolinite nanocomposite

  • Awad, Mahmoud E.
  • López Galindo, Alberto
  • Medarevic, Djordje
  • Milenkovic, Marina
  • Ibric, Svetlana
  • El-Rahmany, Mahmoud M.
  • Viseras, César
The present research aims to enhance the antimicrobial activity of kaolinite surfaces by a one-step cost-effective and energy-efficient dry thermal reaction, producing an antibacterial and antifungal silver-kaolinite (Ag-Kao) nanocomposite agent. Pharmaceutical grade kaolin powder samples, with variable kaolinite structural order–disorder degree, were homogeneously mixed with silver nitrate in a proportion 1:4 AgNO:kaolin (w/w) and sintered at 400 °C for 30 min. The composition, microstructure, microtexture and surface characteristics of the pyro-fabricated nanocomposites were characterized by XRD/XRF diffractometry, differential scanning calorimetry DSC, FT-IR spectroscopy, TEM/EDX, zeta potential (mV) measured within the 2–12 pH range, and BET method. Physicochemical stability was evaluated by silver dissociation testing under close-neutral and acidic conditions with Ag content assay using ICP-OES. The resulting Ag-Kao nanocomposites exhibited bulk silver contents ranging from 9.29% to 13.32% with high physicochemical stability in both neutral and acidic mediums (Ag dissociation rate <0.5% in 5 days). Ag nanocrystals exhibited particle sizes ranging from 5 to 30 nm, which were embedded and reinforced within the kaolinite matrix. The sizes of the Ag nanocrystals and their distribution patterns on the edges and faces of kaolinite platelets were controlled by the structural order–disorder degree. Highly ordered kaolinites (Hinckley Index, HI > 1) produced platelet edge-clustered silver nanocrystals due to the abundance of the dangling hydroxyls on platelet edges, while the highly disordered kaolinite (HI < 1) provided homogeneous platelet basal-doped silver nanocrystals due to the presence of some residual charges by exposed basal hydroxyl groups with interplatelet silver diffusivity. At pH 2, the magnitude of the positive surface charge was influenced by the silver nanocrystal size. Nanocomposites with the smallest silver nanocrystals (10–5 nm) exhibited the highest positive zeta potential (+15.2 mV to +17.0 mV), while those with larger silver nanocrystals (up to 30 nm) indicated lower positive zeta potential values (+9.5 mV to +3.6 mV). Under the same testing conditions using the Mueller-Hinton broth microdilution method, the raw kaolin samples did not show any significant antimicrobial activity, while all the pyro-fabricated Ag-Kao nanocomposite samples showed potent antibacterial and antifungal activity at low doses (MIC range 0.1–0.0125 mg/mL). Therefore, modulation of the effective electrostatic surface charge of the kaolinite platelets, via thermal doping of silver within their basal planes and edges, was found to be strongly dependent on the pH as well as the size and microtexture of the silver nanocrystals (mainly controlled by the order–disorder degree HI). The resulting modified nanostructure, with physicochemical stability and the efficient surface properties of the designed pyro-fabricated nanocomposite, led to an enhanced synergistic biophysical antimicrobial activity., This research was supported by the Egyptian Cultural Affairs and Missions Sector (Plan number 7: 2012/2017), Ministry of Higher Education; Group CTS-946 (Junta de Andalucía, Spain); MINECO project (CGL2016-80833-R); Erasmus + KA1 mobility program 2016/2017; and the Ministry of Education, Science and Technological Development, Republic of Serbia. The first author is very grateful to Mrs. Nataša Stojković (Department of Microbiology), Mrs. Biljana Mihailović and Dr. Vladimir Dobričić (Department of Pharmaceutical Chemistry) of the Faculty of Pharmacy, University of Belgrade, Serbia for their technical assistance.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Brazilian palygorskite as an alternative to commercial adsorbents for methylene blue: A discussion about composition, morphology and pore profile

  • Figueiredo, V. V.
  • Vianna, E. L. F.
  • Lima, Bruno S.
  • Jesus, T. C. L.
  • García-Villén, Fátima
  • Bertolino, L. C.
  • Spinelli, L. S.
  • Viseras, César
Palygorskite has attracted particular attention as a specialized adsorbent due to its high specific surface area, porous texture and abundant surface groups, but its processing for commercial products makes the resulting material more expensive. In this scope, the aim of this work is to evaluate the potential of Brazilian naturally occurring palygorskite samples with low processing degree as an alternative to commercial palygorskites adsorbents for methylene blue, evaluating samples with different compositions, morphologies and microporous profiles. Materials were characterized using FTIR, X-ray diffraction, X-ray fluorescence, scanning electron microscopy, and surface area analysis (BET method). The Brazilian ones were processed in bar and disk mills and passed through a # 325 mesh sieve system. All samples showed common palygorskite X-ray diffraction patterns and specific surface area ranging from 100 to 147 m/g. The application of clay samples was investigated for the adsorption of methylene blue (MB) dye, and the influence time of adsorption, initial dye concentration and adsorbent dosage were evaluated. The methylene blue adsorption was best described by the pseudo-second order model. The adsorption kinetics of methylene blue by palygorskite conforms to the pseudo-second-order model (R = 0,9997). The maximum removal capacity for methylene blue was determined to be 694 (±36.53) mg/g. Additionally, the Freundlich model demonstrated the most favorable mathematical fit. Adsorption capacities varied between 49 and 150 mg/g for 300 mg/L MB solutions, with noteworthy performance exhibited by Brazilian samples, achieving up to twice the adsorption compared to their commercial counterparts, despite possessing lower specific surface areas. The presence of two distinct pore modes, centered at 25 and 45 Å, proved pivotal in the sample with the highest adsorption capacity, reaching adsorption equilibrium at 40 min., We thank FAPERJ, CAPES and CNPq (311551/2019–0) for research grants; the Spanish research group CTS-946 for FTIR, X-ray diffraction and X-ray fluorescence analysis, which were fund by the project CGL2016-80833-R. We also thank INMETRO and IME use of the scanning electron microscope.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Conformational polymorphic changes in the crystal structure of the chiral antiparasitic drug praziquantel and interactions with calcium carbonate

  • Borrego-Sánchez, Ana
  • Carazo, Esperanza
  • Albertini, Beatrice
  • Passerini, Nadia
  • Perissutti, Beatrice
  • Cerezo, Pilar
  • Viseras, C.
  • Hernández Laguna, Alfonso
  • Aguzzi, Carola
  • Sainz-Díaz, C. Ignacio
Praziquantel is an antiparasitic drug used for decades. Currently, the praziquantel commercial preparation is a racemic mixture, in which only the levo-enantiomer possesses anthelmintic activity. The knowledge of its properties in the solid state and other chemical-physical properties is necessary for improving its efficacy and applications. Drug solid dispersions were prepared with calcium carbonate at 1:5 drug to excipient weight ratio by solvent evaporation method. Then, the modification of the crystal structure of the racemic polymorph of praziquantel in presence of calcium carbonate has been studied by means of several analytical techniques (DSC, TGA, XRD, SEM, FTIR, Raman spectroscopy and chiral liquid chromatography). This study has been completed with atomistic calculations based on empirical interatomic force fields and quantum mechanics methods applied to the crystal structure of praziquantel and of intermolecular interactions. The results evidenced that calcium carbonate provoked a conformational change in the praziquantel molecule yielding the formation of different polymorphs of praziquantel crystal. These alterations were not observed replacing calcium carbonate with colloidal silica as excipient in the solid dispersion., Authors are thankful to the regional Andalusian projects (RNM363 and RNM1897) and national MINECO project (FIS2016-77692-C2-2-P and CGL2016-80833-R) for financial support and to the Supercomputational Center of Universidad de Granada and CSIC for computing facilities.