Skip to main content

TECTONICA SALINA EN CINTURONES CONTRACTIVOS

CGL2017-85532-P

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fault interpretation in seismic reflection data: an experiment analysing the impact of conceptual model anchoring and vertical exaggeration

  • Alcalde, Juan
  • Bond, Clare E.
  • Johnson, Gareth
  • Kloppenburg, A.
  • Ferrer, O.
  • Bell, R.
  • Ayarza, P.
The use of conceptual models is essential in the interpretation of reflection seismic data. It allows interpreters to make geological sense of seismic data, which carries inherent uncertainty. However, conceptual models can create powerful anchors that prevent interpreters from reassessing and adapting their interpretations as part of the interpretation process, which can subsequently lead to flawed or erroneous outcomes. It is therefore critical to understand how conceptual models are generated and applied to reduce unwanted effects in interpretation results. Here we have tested how interpretation of vertically exaggerated seismic data influenced the creation and adoption of the conceptual models of 161 participants in a paper-based interpretation experiment. Participants were asked to interpret a series of faults and a horizon, offset by those faults, in a seismic section. The seismic section was randomly presented to the participants with different horizontal–vertical exaggeration (1:4 or 1:2). Statistical analysis of the results indicates that early anchoring to specific conceptual models had the most impact on interpretation outcome, with the degree of vertical exaggeration having a subdued influence. Three different conceptual models were adopted by participants, constrained by initial observations of the seismic data. Interpreted fault dip angles show no evidence of other constraints (e.g. from the application of accepted fault dip models). Our results provide evidence of biases in interpretation of uncertain geological and geophysical data, including the use of heuristics to form initial conceptual models and anchoring to these models, confirming the need for increased understanding and mitigation of these biases to improve interpretation outcomes.© Author(s) 2019., Juan Alcalde has been supported by the Natural Environment Research Council (grant no. NE/M007251/1) and the H2020 European Institute of Innovation and Technology (SIT4ME (grant no. 17024)). Clare E. Bond is currently funded through a Royal Society of Edinburgh research sabbatical on uncertainty in seismic image interpretation. Gareth Johnson is funded by the University of Strathclyde Faculty of Engineering. Oriol Ferrer has been supported by the SALCONBELT Project (grant no. CGL2017-85532-P), the Geomodels Research Institute and the Grup de Geodinàmica i Anàlisi de Conques (grant no. 2017SGR-596). Puy Ayarza is funded by the Regional Government of Castile and León (project SA065P17)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Control paleomagnético de la cinemática de márgenes pasivos invertidos con estructuras salinas diapíricas. Resultados preliminares en sedimentos sindiapíricos del margen norte de la cuenca extensional Vasco-Cantábrica, Paleomagnetic constraints on the kinematics of inverted passive margins with salt diapiric structures. Preliminary results from syndiapiric overburden rocks of the northern margin of the Basque-Cantabrian extensional Basin

  • Beamud, Elisabet
  • Roca, E.
  • Soto, Ruth
  • Peigney, Charlotte
  • Pueyo Morer, Emilio Luis
X Congreso Geológico de España, 5-7 Julio 2021, Vitoria - Gasteiz, Los niveles salinos depositados antes de la deformación, tanto en márgenes pasivos como en contextos orogénicos, producen una deformación diferencial en los niveles por encima y por debajo del despegue salino. La distribución de los despegues salinos controla el acortamiento diferencial y la formación de arcos orogénicos y el diapirismo puede generar minicuencas asociadas a rotaciones de ejes vertical durante su desarrollo. Nuestro estudio, con 65 estaciones paleomagnéticas, pretende deducir la cinemática de estructuras salinas mediante el estudio de una porción del Arco Vasco, en el margen norte de la Cuenca extensiva Vasco-Cantábrica, donde la cobertera de la sal está compartimentada por varias paredes salinas (diapiros de Bakio, Bermeo, Guernica y Mungia). Los resultados muestran rotaciones antihorarias predominantes y rotaciones horarias y antihorarias en flancos opuestos de los diapiros. Los test del pliegue revelan que algunas estaciones están remagnetizadas mientras otras muestran magnetizaciones ¿prefolding¿. Los experimentos de magnetismo de rocas en parte de las muestras estudiadas confirman estas observaciones. A pesar de que son necesarios más análisis para entender el origen y la distribución de las remagnetizaciones, es posible establecer un modelo cinemático preliminar de la deformación suprasal junto a los materiales despegados infrayacentes., This work has been supported by the project SALTCON- BELT-CGL2017-85532-P funded by Agencia Estatal de Investigación (AEI) and FEDER. Some of the authors are members of the consolidated research group of Geodynamics and Basin Analysis 2017SGR596 of the Generalitat de Catalunya.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Is the Ibero-Armorican Arc primary or secondary? An analysis of the contraction required to form it by rotation around a vertical axis

  • Casas, Josep Maria
  • Guimerà, J.
  • Alvarez-Marrón, Joaquina
  • Días da Silva, Ícaro
Various models have been proposed to explain the formation of the Ibero-Armorican Arc (IAA) as either primary or secondary (rotational). Models for secondary arc formation require significant rotation around a vertical axis at the end of the Variscan orogeny. Estimates for the amount of north–south (present coordinates) contraction (horizontal shortening) required for these rotations range from 54 at the core to 91% at the SE tip of the arc, near to the present day Mediterranean coast. These estimates are compared with coeval deformational structures developed in three areas of the orogen: (1) in the autochthonous hinterland in the southern branch of the arc; (2) in the Cantabrian Zone foreland fold–thrust belt in the core of the arc; and (3) in the SE continuation of the southern branch of the IAA in the present day Iberian Chain. From this analysis it follows that the contraction associated with late Variscan deformation is much less than that needed to explain the formation of the IAA from a formerly linear orogen via rotation around a vertical axis. We therefore propose that the geometry of the arc should be re-evaluated. We discuss the palaeomagnetic data purported to support the secondary origin, as well as the role of late Variscan regional strike-slip faults in modifying the geometry of the Iberian and Armorican massifs. Our analysis suggests that the IAA formed mainly from a primary non-rotational margin-controlled curvature, slightly modified by c. 5–20% of superposed contraction during late Carboniferous and/or Alpine times., Financial support was provided by CGL2017-87631-P, CGL2016-76438-P, PGC2018-093903-B-C22 and SALTCONBELT-CGL2017-85532-Pprojects, funded by Agencia Estatal de Investigación (AEI) and Fondo Europeode Desarrollo Regional (FEDER), and by project 2014SGR-467 (UB-GEOMODELS Research Institute and the Grup de Geodinàmica i Anàlisi deConques). IDS is grateful for financial support given by the Estímulo ao EmpregoCientífico–Norma Transitória national science contract in the Faculdade deCiências da Universidade de Lisboa, Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Geometrical characterization of fracture systems using point clouds and SELF-Software, example of the Añisclo anticline carbonate platform, Central Pyrenees

  • García-Sellés, David|||0000-0002-5995-5712
  • Carola Molas, Eloi|||0000-0003-2528-150X
  • Gratacós Torrà, Òscar|||0000-0002-5328-9114
  • Cabello, Patrícia|||0000-0001-9291-6400
  • Muñoz, Josep Anton|||0000-0003-0740-879X
  • Ferrer, Oriol|||0000-0001-5545-9992
Natural fracture systems contribute significantly to rock mass anisotropies. Characterizing these systems is essential for understanding processes of fluid flow, energy exploration and storage, slope stability or tectonic processes that can affect the permeability or compaction of the material, as well as reflect its temporal evolution. This work presents a set of automatic and supervised algorithms integrated into the open-access software solution SEFL, designed to characterize fracture systems using remote sensing data sets. The software implements various strategies to quantify geometrical parameters with deterministic or stochastic descriptions, facilitating a detailed characterization of the fracture system for numerical simulations. Geological outcrops provide direct access to the rock masses and discontinuities, offering analogies with materials that are otherwise inaccessible for its direct study. The digital acquisition of the terrain using high-resolution techniques, such as Terrestrial Laser Scanner (TLS) or photogrammetry to obtain point clouds, enabled post-field studies, particularly for fracture systems that are complex, inaccessible, or large in scale. Additionally, SEFL offers a tool based on the concept of fracture stratigraphy to identify mechanical units, which are essential frameworks for measuring and calculating fracture properties. This new methodology has been applied to study the fractured Eocene limestone outcrop at the hinge of the Añisclo anticline (South-Central Pyrenees, NE Iberia) which has been digitally acquired and characterized. SEFL output data interpretations revealed an outcrop characterized by over two thousand modelled fractures, five fracture sets, fourteen fracture stratigraphic units, and 1-2 fractures/m.