Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Enhanced biaxial compressive strain tuning of 2D semiconductors via hot dry transfer on polymer substrates

  • Cortés-Flores, Álvaro
  • Henríquez-Guerra, Eudomar
  • Almonte, Lisa
  • Gosálbez-Martínez, Daniel
  • Li, Hao
  • Castellanos-Gomez, Andres
  • Calvo, M. Reyes
  • Gosálbez-Martínez, Daniel|||/items/c8907d7c-643e-478e-a2b2-716d2d44f265
Strain engineering is an effective tool for tailoring the properties of two-dimensional (2D) materials, of particular interest for tuning quantum phenomena. Among the limited methods available for strain engineering under cryogenic conditions, thermal mismatch with polymeric substrates provides a simple and affordable strategy to induce biaxial compressive strain upon cooling. In this work, we demonstrate the transfer of unprecedentedly large levels of uniform biaxial compressive strain to single-layer WS2 by employing a pre-straining approach prior to cryogenic cooling. Using a hot-dry-transfer method, single-layer WS2 samples were deposited onto thermally expanded polymeric substrates at 100 °C. As the substrate cools to room temperature (RT), it contracts ∼0.5%, inducing biaxial compressive strain in the WS2 layer. This pre-strain results in a measurable blueshift in excitonic energies compared to samples transferred at RT, which serve as not pre-strained controls. Subsequent cooling of the pre-strained samples from RT down to 5 K leads to a remarkable total blueshift of ∼200 meV in the exciton energies of single-layer WS2. This energy shift surpasses previously reported values, indicating superior levels of biaxial compressive strain induced by the accumulated substrate contraction (∼1.7%). Moreover, our findings reveal a pronounced temperature dependence in strain transfer efficiency, with gauge factors approaching theoretical limits for ideal strain transfer at 5 K. This enhanced efficiency, attributed to the increase of the Young’s modulus of the polymeric substrate with decreasing temperature, is particularly relevant for strain engineering of 2D materials at low temperatures.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Modulation of the Superconducting Phase Transition in Multilayer 2H-NbSe2 Induced by Uniform Biaxial Compressive Strain

  • Henríquez-Guerra, Eudomar
  • Almonte, Lisa
  • Li, Hao
  • Elvira, Daniel
  • Calvo, M. Reyes
  • Castellanos-Gomez, Andres
Strain is a powerful tool for tuning the properties of two-dimensional materials. Here, we investigated the effects of large, uniform biaxial compressive strain on the superconducting phase transition of multilayered 2H-NbSe2 flakes. We observed a consistent decrease in the critical temperature of NbSe2 flakes induced by the large thermal compression of a polymeric substrate (>1.2%) at cryogenic temperatures. For thin flakes (∼10 nm thick), a strong modulation of the critical temperature up to 1.5 K is observed, which monotonically decreases with increasing flake thickness. The effects of biaxial compressive strain remain significant even for relatively thick samples up to 80 nm thick, indicating efficient transfer of strain not only from the substrate to the flakes but also across several van der Waals layers. This work demonstrates that compressive strain induced from substrate thermal deformation can effectively tune phase transitions at low temperatures in 2D materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Thickness Determination and Control in Protein-Based Biomaterial Thin Films

  • Almonte, Lisa
  • Fernandez, Maxence
  • Cortés-Ossa, Juan David
  • Blesio, Paolo
  • Juan-Bordera, Lucía
  • Sabater, Carlos
  • Cortajarena, Aitziber L.
  • Calvo, M. Reyes
  • Sabater, Carlos|||/items/dde13588-5758-450f-b6c3-494d08459c4d
Controlling the thickness and uniformity of biomaterial films is crucial for their application in various fields including sensing and bioelectronics. In this work, we investigated film assemblies of an engineered repeat protein─specifically, the consensus tetratricopeptide repeat (CTPR) protein ─a system with unique robustness and tunability. We propose the use of microreflectance spectroscopy and apparent color inspection for the quick assessment of the thickness and uniformity of protein-based biomaterial films deposited on oxidized silicon substrates. Initially, we characterized the thickness of large, uniform, spin-coated protein films and compared the values obtained from microreflectance spectroscopy with those obtained from other typical methods, such as ellipsometry and atomic force microscopy. The excellent agreement between the results obtained from the different techniques validates the effectiveness of microreflectance as a fast, noninvasive, and affordable technique for determining the thickness of biomaterial films. Subsequently, we applied microreflectance spectroscopy to determine the thickness of drop-casted CTPR-based films prepared from small protein solution volumes, which present a smaller surface area and are less uniform compared to spin-coated samples. Additionally, we demonstrate the utility of apparent color inspection as a tool for assessing film uniformity. Finally, based on these results, we provide a calibration of film thickness as a function of the protein length and concentration for both spin-coated and drop-casted films, serving as a guide for the preparation of CTPR films with a specific thickness. Our results demonstrate the remarkable reproducibility of the CTPR film assembly, enabling the simple preparation of biomaterial films with precise thickness.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unveiling intrinsic bulk photovoltaic effect in atomically thin ReS2

  • Ramos, Maria
  • Ahmed, Tanweer
  • Tu, Bao Q.
  • Chatzikyriakou, Eleni
  • Olano-Vegas, Lucía
  • Martín-García, Beatriz
  • Calvo, M. Reyes
  • Tsirkin, Stepan S.
  • Souza, Ivo
  • Casanova, Félix
  • Juan, Fernando de
  • Gobbi, Marco
  • Hueso, Luis E.
The bulk photovoltaic effect (BPVE) offers a promising avenue to surpass the efficiency limitations of current solar cell technology. However, disentangling intrinsic and extrinsic contributions to photocurrent remains a significant challenge. Here, we fabricate high-quality, lateral devices based on atomically thin ReS2 with minimal contact resistance, providing an optimal platform for distinguishing intrinsic bulk photovoltaic signals from other extrinsic photocurrent contributions originating from interfacial effects. Our devices exhibit large bulk photovoltaic performance with intrinsic responsivities of ∼1 mA/W in the visible range, without the need for external tuning knobs such as strain engineering. Our experimental findings are supported by theoretical calculations. Furthermore, our approach can be extrapolated to investigate the intrinsic BPVE in other noncentrosymmetric van der Waals materials, paving the way for a new generation of efficient light-harvesting devices., This work has been funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR-C17.I1, as well as by IKUR Strategy under the collaboration agreement between DIPC, CFM, and nanoGUNE on behalf of the Department of Education of the Basque Government. This work received funding from MICIU/AEI/10.13039/501100011033 (Grant CEX2020-001038-M); from MICIU/AEI and ERDF/EU (Projects PID2021-128004NB-C21 and PID2021-122511OB-I00); and from MICIU/AEI and European Union NextGenerationEU/PRTR (Project PCI2021-122038-2A). B.M.G. and M.G. acknowledge support from MICIU/AEI and European Union NextGenerationEU/PRTR (Grants RYC2021-034836-I and RYC2021-031705-I). B.Q.T. acknowledges support from MICIU/AEI and ESF+ (Grant PRE2022-103674). L.O.-V. is thankful for funding from Spanish MICIU/AEI/10.13039/501100011033 and ESF+ for the PhD grant PRE2022-104385. M.R.C. is funded through grant CNS2023-145151 funded by MICIU/AEI/10.13039/501100011033 and from European Union “NextGenerationEU”/PRTR. This work has been produced using the DIPC Supercomputing Center and the Aristotle University of Thessaloniki (AUTh) High Performance Computing Infrastructure and Resources. The authors acknowledge technical support from Roger Llopis and Ralph Gay. T.A. acknowledges financial support from European Council via Grant agreement number 101046231 Fantasticof and European Union via Marie Skłodowska-Curie grant agreement number 101107842 ACCESS., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2020-001038-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Strain Engineering of Correlated Charge-Ordered Phases in 1T-TaS2

  • Luque-Merino, Rafael
  • Carrascoso Plana, Félix
  • Henríquez-Guerra, E.
  • Calvo, M.R.
  • Frisenda, R.
  • Castellanos-Gómez, Andrés
Strain engineering is a powerful strategy for controlling the structural and electronic properties of two-dimensional materials, particularly in systems hosting charge density wave (CDW) order. In this work, we apply uniaxial tensile and compressive strain to thin 1T-TaS2flakes using a flexible, device-compatible platform and systematically investigate the strain-dependent behavior of the nearly commensurate (NC) to incommensurate (IC) CDW phase transition. This transition is driven by Joule heating at room temperature. Electrical transport measurements reveal that both the switching threshold voltage and the resistance of the NC-CDW phase exhibit clear, reversible strain dependence. Furthermore, we identify a quadratic dependence between the strain-induced resistance change and the threshold voltage, confirming that piezoresistive modulation governs the strain tunability of the phase transition. We demonstrate a room-temperature, electrical readout strain and displacement sensor with a threshold-like response in a programmable window. These results highlight the potential of 1T-TaS2for on-chip sensing of strain and displacement. © 2025 The Authors. Published by American Chemical Society, A.C.-G. acknowledges funding by the Ministry of Science and Innovation (Spain) through Projects PDC2023-145920-I00 and PID2023-151946OB-I00 and the European Research Council through the ERC-2024-PoC StEnSo (Grant Agreement 101185235) and the ERC-2024-SyG SKIN2DTRONICS. R.L.M. and A.C.-G. acknowledge the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S. M.R.C. acknowledges funding from PID2023-146354NB-C44 (funded by MICIU/AEI/10.13039/501100011033) and from EU FEDER. M.R.C. and E.H.-G. acknowledge CNS2023-145151 (funded by MICIU/AEI/10.13039/501100011033 and EU NextGenerationEU/PRTR). R.F. acknowledges funding from Ministero dell’Università e della Ricerca (MUR) through the PRIN Grant 2D-PentaSensing (P2022HT3FF)., Peer reviewed