Skip to main content

SIMULACION Y OPTIMIZACION MEDIANTE ALGORITMOS GENETICOS DE PROCESOS DE MEMBRANAS PARA EL TRATAMIENTO Y RECUPERACION DE AGUAS SALOBRES

CTM2010-20248

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2010
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Crossed mixture process design approach to model nanofiltration rejection for non-dilute multi-ionic solutions in a given range of solution compositions

  • Gozálvez-Zafrilla, José M.|||0000-0003-4419-6765
  • Santafé Moros, María Asunción|||0000-0002-0933-108X
  • García-Díaz, J. Carlos|||0000-0002-5559-7110
The goal of the present work is to illustrate the applicability of crossed mixture-process design to predict the rejection of the nanofiltration membranes when treating non-dilute solutions. The method used in this work is based on the use of mixture factors derived from the fractions of equivalents of the major ions present in solution combined with the total concentration as a process variable. In this way, polynomial models for permselectivity properties can be obtained.Model accuracy is improved by using pseudo-components to restrict the range of the composition variables to that expected for the feed water compositions. The experimental plan uses the D-optimal criterion. As an application example, the procedurewas used to model the performance of the nanofiltration membrane NF270 (Dow-Filmtec) with ionicmixtures containing chloride, nitrate, sulfate, sodium and calcium. The experimentswere carried out in a pilot plantwith solutions of total concentration ranging from 2480 to 4050 mg/L. The obtained polynomialmodels could satisfactorily describe individual ion rejection despite the solutions not being dilute. The polynomial models can be useful for design and operation purposes as an alternative to physical-based nanofiltration models., The Spanish Ministry for Science and Innovation (Project OPTIMEM CTM2010-20248) and the Universitat Politecnica de Valencia (PAID-06-08-3287) are kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Implementation of membrane models on a CAPE-OPEN tool to simulate a process including RO membranes

  • Gozálvez-Zafrilla, José M.|||0000-0003-4419-6765
  • Santafé Moros, María Asunción|||0000-0002-0933-108X
  • Sanchis Sebastiá, Miguel
  • Gomis Fons, Joaquín
Process simulators are a useful tool for evaluating different configurations of chemical processes and developing new ones. Although these programs include many standard units like reactor or distillation towers, membrane units are not usually included. In this paper, it is shown the possibility to implement a reverse osmosis (RO) membrane unit in the free process simulator COCO, using input membrane parameters. The RO modeling is based on the coupling of the solution diffusion model with a model for concentration polarization. The model was implemented as a Matlab CAPE-OPEN unit operation. In order to show the functionality of the developed application, a rinsing process adapted from literature was implemented to test different configurations. In this way, the combined use of the COCO simulator and the model of a reverse osmosis unit proved to be a useful tool for comparing the performance of different process configurations., The Spanish Ministry of Economy and Competitiveness is kindly acknowledged (Project CTM 2010-20248).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparison between artificial neural networks and Hermia&apos, s models to assess ultrafiltration performance

  • Corbatón Báguena, María José
  • Catalán Martínez, David
  • Vincent Vela, Maria Cinta|||0000-0001-8493-0165
  • Gozálvez-Zafrilla, José M.|||0000-0003-4419-6765
  • Alvarez Blanco, Silvia
  • Lora-García, Jaime|||0000-0003-1699-5404
In this work, flux decline during crossflow ultrafiltration of macromolecules with ceramic membranes has been modeled using artificial neural networks. The artificial neural network tested was the multilayer perceptron. Operating parameters (transmembrane pressure, crossflow velocity and time) and dynamic fouling were used as inputs to predict the permeate flux. Several pretreatments of the experimental data and the optimal selection of the parameters of the neural networks were studied to improve the fitting accuracy. The fitting accuracy obtained with artificial neural networks was compared with Hermia pore blocking models adapted to crossflow ultrafiltration. The artificial neural networks generate simulations whose performance was comparable to that of Hermia's models adapted to crossflow ultrafiltration. Considering the computational speed, high accuracy and the ease of the artificial neural networks methodology, they are a competitive, powerful and fast alternative for dynamic crossflow ultrafiltration modeling., The Spanish Ministry for Science and Innovation (Project OPTIMEM CTM2010-20248) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Efficient fitting of nanofiltration model parameters for a specified groundwater type by selecting suitable characterization data-sets

  • Fernández Fernández, Irene
  • Gozálvez-Zafrilla, José M.|||0000-0003-4419-6765
  • Santafé Moros, María Asunción|||0000-0002-0933-108X
Nanofiltration (NF) models can be useful to perform optimal designs of membrane systems and to estimate membrane performance for waters. There is a special interest in obtaining NF models with parameters based on measurable properties of the membrane and independent from the feed and operating conditions. However, many times, from a practical point of view, NF parameters can be directly fitted from experiments performed with salts in a range of compositions. The aim of this study is to select the better combination of experiments to yield a suitable fitting for the NF model Donnan steric-partitioning pore model with dielectric exclusion (DSPM-DE). In our case, the best fitting for a specific group of waters is searched (groundwater belonging to a Mediterranean region with moderate salinity). The first part of the work is devoted to study which combinations of salts and concentrations lead to higher information. Using known values of NF parameters, permselective results were computationally generated using the NF model for a huge number of different combinations of compositions and random parameter sets. Performance factors for permeate flux and rejection based on the comparison between the characterization groups and a control group were defined. The second part of the work focused on the experimental validation of the selection procedure. The results showed that there are characterization sets (composition and operating conditions) that yield higher fitting performance. These combinations of experiments should be the preferred ones, when direct fitting from experiments is going to be performed., This work was supported by the Ministry for Economy and Competitiveness [CTM2010-20248 (Project OPTIMEM)], [BES-2011-049230].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental simulation of continuous nanofiltration processes by means of a single module in batch mode

  • Santafé Moros, María Asunción|||0000-0002-0933-108X
  • Gozálvez-Zafrilla, José M.|||0000-0003-4419-6765
  • Lora-García, Jaime|||0000-0003-1699-5404
[EN] This work proposes a method of simulating the performance of continuous nanofiltration processes by means of experimental runs performed on a laboratory set-up equipped with a spiral-wound module working in batch recirculation mode. It describes how to implement the proper changes in feed concentration and operating conditions in a batch recirculated system in order to obtain similar conditions to those of a continuous one. The analogy between the concentration process in the continuous and in the batch recirculation system is discussed and the difference in ion concentration of the cumulative permeate between the two systems is estimated numerically. The procedure was applied in a case study to estimate the performance of a continuous process intended to remove nitrate from brackish water using a high rejection nanofiltration membrane (DowFilmtec NF90). The sequence of concentration steps performed in the batch-recirculated set-up yielded an estimation of the ion concentration profiles throughout the continuous system. A mathematical analysis of the results showed that the nitrate concentration in the permeate experimentally obtained in the batch system is 4.5% higher than that expected in the continuous system. The experimental method described here can be used to design membrane system applications for which the target ions are not accurately predicted by models or are not included in commercial software. (C) 2017 Published by Elsevier B.V., This work was supported by the Spanish Ministry for Economy and Competitiveness [Project OPTIMEM CTM2010-20248].