Skip to main content

TRATAMIENTO ELECTROQUIMICO DE COLORANTES Y REUTILIZACION DE EFLUENTES INDUSTRIALES

CTM2012-31461

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2012
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Secretaría de Estado de Investigación, Desarrollo e Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Photocatalytic membrane reactor for the removal of C.I. Disperse Red 73

  • Buscio Olivera, Valentina|||0000-0002-0313-5299
  • Brosillon, Stephan
  • Mendret, Julie
  • Crespi Rosell, Martin|||0000-0002-7445-9282
  • Gutiérrez Bouzán, María Carmen|||0000-0001-9498-8299
After the dyeing process, part of the dyes used to color textile materials are not fixed into the substrate and are discharged into wastewater as residual dyes. In this study, a heterogeneous photocatalytic process combined with microfiltration has been investigated for the removal of C.I. Disperse Red 73 from synthetic textile effluents. The titanium dioxide (TiO2) Aeroxide P25 was selected as photocatalyst. The photocatalytic treatment achieved between 60% and 90% of dye degradation and up to 98% chemical oxygen demand (COD) removal. The influence of different parameters on photocatalytic degradation was studied: pH, initial photocatalyst loading, and dye concentration. The best conditions for dye degradation were pH 4, an initial dye concentration of 50 mg<bold>L</bold>-1, and a TiO2 loading of 2 gL(-1). The photocatalytic membrane treatment provided a high quality permeate, which can be reused
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Comparison of different wastewater treatments for colour removal of reactive dye baths

  • López Grimau, Víctor|||0000-0001-9008-4188
  • Vilaseca Vallvé, M. Mercedes|||0000-0001-5895-6214
  • Gutiérrez Bouzán, María Carmen|||0000-0001-9498-8299
The generation of high-coloured wastewater is one of the main environmental problems of the textile industry. Reactive dyes are widely used in the dyeing of cellulosic fibres. However, they have low exhaustion degree (70–90%). The degradation of residual dyes by aerobic biological treatment is very poor, being necessary the application of specific treatments. In this work, three different methods for the removal of reactive dyes were compared: electrochemical treatment, coagulation with Moringa oleifera waste and enzymatic treatment with laccase. Two azo bifunctional dyes with different reactive groups were selected: C.I. Reactive Black 5 (vinyl sulphone) and C.I. Reactive Red 231 (chlorotriazine). The influence of pH (5 and 9) and dye hydrolysis on the decolourisation yield was studied. The electrochemical treatment was the most efficient, with 95–100% colour removal yield. The coagulation with M. oleifera waste also achieved high colour removal efficiency (91–94%). Both methods showed an independent behaviour with respect to pH or dye hydrolysis. The enzymatic treatment should be performed at pH 5. This method was suitable to remove the chlorotriazine dye (92–93% efficiency), whereas the vinyl sulphone one showed a marked dependence on dye hydrolysis: moderately efficient for the hydrolysed dye and highly efficient without hydrolysis. The activity of laccase was not modified by the usual salinity of the reactive dyeing effluent (20 g/L NaCl). Nevertheless, the effluent salinity enhanced the electrochemical and M. oleifera treatment yield., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Photocatalytic membrane reactor for the removal of C.I. Disperse Red 73

  • Buscio Olivera, Valentina
  • Brosillon, Stephan
  • Mendret, Julie
  • Crespi Rosell, Martin
  • Gutiérrez Bouzán, María Carmen
After the dyeing process, part of the dyes used to color textile materials are not fixed into the substrate and are discharged into wastewater as residual dyes. In this study, a heterogeneous photocatalytic process combined with microfiltration has been investigated for the removal of C.I. Disperse Red 73 from synthetic textile effluents. The titanium dioxide (TiO2) Aeroxide P25 was selected as photocatalyst. The photocatalytic treatment achieved between 60% and 90% of dye degradation and up to 98% chemical oxygen demand (COD) removal. The influence of different parameters on photocatalytic degradation was studied: pH, initial photocatalyst loading, and dye concentration. The best conditions for dye degradation were pH 4, an initial dye concentration of 50 mg<bold>L</bold>-1, and a TiO2 loading of 2 gL(-1). The photocatalytic membrane treatment provided a high quality permeate, which can be reused, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Comparison of different wastewater treatments for colour removal of reactive dye baths

  • López Grimau, Víctor
  • Vilaseca Vallvé, M. Mercedes
  • Gutiérrez Bouzán, María Carmen
The generation of high-coloured wastewater is one of the main environmental problems of the textile industry. Reactive dyes are widely used in the dyeing of cellulosic fibres. However, they have low exhaustion degree (70–90%). The degradation of residual dyes by aerobic biological treatment is very poor, being necessary the application of specific treatments. In this work, three different methods for the removal of reactive dyes were compared: electrochemical treatment, coagulation with Moringa oleifera waste and enzymatic treatment with laccase. Two azo bifunctional dyes with different reactive groups were selected: C.I. Reactive Black 5 (vinyl sulphone) and C.I. Reactive Red 231 (chlorotriazine). The influence of pH (5 and 9) and dye hydrolysis on the decolourisation yield was studied. The electrochemical treatment was the most efficient, with 95–100% colour removal yield. The coagulation with M. oleifera waste also achieved high colour removal efficiency (91–94%). Both methods showed an independent behaviour with respect to pH or dye hydrolysis. The enzymatic treatment should be performed at pH 5. This method was suitable to remove the chlorotriazine dye (92–93% efficiency), whereas the vinyl sulphone one showed a marked dependence on dye hydrolysis: moderately efficient for the hydrolysed dye and highly efficient without hydrolysis. The activity of laccase was not modified by the usual salinity of the reactive dyeing effluent (20 g/L NaCl). Nevertheless, the effluent salinity enhanced the electrochemical and M. oleifera treatment yield., Peer Reviewed, Postprint (author’s final draft)
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Relevance of toxicity assessment in wastewater treatments, case study-four Fenton processes applied to the mineralization of C.I. acid red 14

  • Idel-aouad, Rajaa|||0000-0001-5615-6176
  • Valiente, Manuel|||0000-0003-0766-9922
  • Gutiérrez-Bouzán, Carmen|||0000-0001-9498-8299
  • Vilaseca, Mercè
  • Yaacoubi, Abdelrani
  • Tanouti, Boumediene
  • López-Mesas, Montserrat|||0000-0002-4470-0194
Fenton and Fenton-like processes, both in homogeneous and heterogeneous phases, have been applied to an aqueous solution containing the dye AR 14 in order to study the mineralization and toxicity of the solutions generated after color elimination. The mineralization of AR 14 occurred slower than the decolorization. The Microtox analysis of the treated solutions showed low toxicity intrinsic to the chemicals used in the process rather than the degradation products obtained after the treatment of the dye solution. The dye degradation for the Fenton oxidation process was initially faster than for the Fenton-like process but after a short time, the four processes showed similar degradation yields. All processes have shown good results being the heterogeneous process the most convenient since the pH adjustment is not necessary, the catalyst is recovered and reused and the generation of contaminated sludge is avoided.