Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Adsorción-desorción de pirimetanil en organomontmorillonitas. Estudios de coagulación

  • Flores, F. M.
  • Undabeytia López, Tomás
  • Morillo González, Esmeralda
  • Torres Sánchez, R. M.
El Pirimetanil (PRM) es un fungicida de contacto perteneciente a la familia de las anilinopirimidinas, que se emplea para reforzar el efecto de otros fungicidas en el tratamiento post-cosecha de frutas. Trabajos previos evidenciaron distinta capacidad de adsorción de montmorillonita (Mt) y organo-montmorillonitas (OrMt), para tres fungicidas, generalmente empleados en colaboración con el PRM. En este trabajo se estudió la adsorción-desorción de PRM empleando una Mt nacional y tres OrMt obtenidas por intercambio catiónico de los surfactantes: bromuros de didodeciltrimetilamonio (DMt) y octadeciltrimetilamonio (OMt) y cloruro de benciltrimetilamonio (BMt), con diferentes contenidos respecto a la CIC (DMt =180%, OMt = 12; 58 Y 166% Y BMt = 55; 99 Y 106%). Además, se analizó la coagulación de los productos de adsorción para su utilización en aplicaciones tecnológicas., Se agradece la financiación de FONARSEC FS Nano-008/2010, y del proyecto CTM2013-42306-R del Ministerio Español de Economía y Competitividad. FMF agradece al Programa Bec.Ar por la beca que permitió realizar este trabajo., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pairing micropollutants and clay-composite sorbents for efficient water treatment: Filtration and modeling at a pilot scale

  • Lelario, Filomena
  • Gardi, Ido
  • Mishael, Y. G.
  • Dolev, Noam
  • Undabeytia López, Tomás
  • Nir, Shlomo
  • Scrano, Laura
  • Bufo, Sabino A.
8 páginas.-- 3 figuras.-- 3 tablas.-- 55 referencias.-- Supplementary data to this article can be found online at http://dx.doi.org/10.1016/j.clay.2016.12.029., Organically modified clay minerals have been widely developed, tested and employed as sorbents for organic pollutants. However, the process of pollutant-composite pairing is not commonly addressed, which would be valuable for efficient pollutant filtration by such sorbents. This study presents an approach for achieving efficient pollutant removal by large-scale composite filters, based on pairing chemically compatible pollutants and composites and by employing a predictive filtration model. The removal of three organic pollutants, simazine, sulfentrazone and diclofenac by lab-scale filtration columns containing one of three sorbents, a polymer-, micelle- or liposome-clay composite, was measured. Understanding the factors governing pollutant-organic modifier interactions enabled to pair an efficient sorbent to each pollutant. The high removal (80%) of simazine by the polymer composite, was attributed to hydrogen bonds and π-π interactions, compared to less than 20% removal by the surfactant composites. The removal of the anionic diclofenac (pKa = 4.1) was mainly governed by electrostatic attraction, explaining its high removal by the most positively charge sorbent, the liposome composite. Sulfentrazone (pKa = 6.5) removal was mostly affected by micellar solubilization and upon its removal, the zeta potential of the micelle-composite was not reduced as obtained for diclofenac removal. The filtration of the successful pairs was modelled to determine sorbent capacity and adsorption and desorption rate constants. The pilot filtration experiments were well described by the model and demonstrated efficient removal of paired pollutants and sorbents. Model simulations predicted promising treatment at environmental pollutant concentrations in the μg L− 1 range. This pairing approach along with model calculations can be a strong and valid tool for efficient pollutant-sorbent filtration., Supported by The European Commission in the framework of the Project ‘Diffusion nanotechnology based devices for water treatment and recycling – NANOWAT’ [ENPI CBC MED I-B/2.1/049, Grant No. 7/1997]. T. Undabeytia also acknowledges financial support by the Spanish government [FEDER funded grant CTM2013-42306-R]. I. Gardi acknowledges the support by the Israeli Ministry of Science, Technology and Space [grant 3-12362]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Technological applications of organo-montmorillonites in the removal of pyrimethanil from water: adsorption/desorption and flocculation studies

  • Flores, F. M.
  • Undabeytia López, Tomás
  • Morillo González, Esmeralda
  • Torres Sánchez, R. M.
14 páginas.-- 7 figuras.-- 5 tablas.-- r eferencias.-- Electronic supplementary material The online version of this article(doi:10.1007/s11356-017-9016-3) contains supplementary material,which is available to authorized users, Pyrimethanil (2-aniline-4, 6-dimethylpyrimidine, PRM) is used in fruit packing plants to control fungal infections and diseases. The effluents greatly polluted with this fungicide, as a point source contamination, need to be technologically treated for their regeneration before they reach water bodies. This work evaluates the use of organo-montmorillonites, synthetized in our laboratory, for their application in adsorption and coagulation/flocculation processes for the removal of PRM from water. The adsorption-desorption performance of PRM in a raw montmorillonite (Mt) and several organo-montmorillonites (organo-Mt) obtained by different amounts and types of exchanged surfactants (octadecyltrimethylammonium (ODTMA) and didodecyldimethylammonium (DDAB) bromides and benzyltrimethylammonium chloride (BTMA)) was studied. The PRM adsorption on raw Mt was assigned mainly to an interlayer occupancy, while hydrophobic interactions between PRM and the surfactants in the exchanged samples increased PRM adsorption, which was correlated with the surfactant loading. PRM desorption showed irreversible behavior in raw Mt, which changed to reversible for organo-Mt samples, and was also correlated with the increase of surfactant loading. Two of the organo-Mt with high surfactant loading (twice the CEC) were assayed for the removal of commercial PRM in coagulation/flocculation tests, and their performance was compared to that of the native clay (Mt). The use of the organo-Mt produced flocculation at a very low ratio (0.5 g L−1), whereas no flocculation was observed with Mt. These results proved the feasibility of the use of organo-Mt for the treatment of wastewater contaminated with PRM using a low organo-Mt/liquid ratio, Financial support of the Argentine Ministry of Science, Technology and Innovation—FONARSEC FS-Nano 008 and the Spanish Ministry of Economy and Competitiveness (Ref. CTM2013-42306-R, supported by funds from the European Regional Development Fund) and the Spanish Agency for International Cooperation for Development—Spanish Ministry of Education A/023433/10-09 is gratefully acknowledged. R.M.T.S. is a member of the National Council of Scientific and Technological Research (CONICET) and F.M. Flores acknowledges CONICET and Argentine (BEC.AR) fellowships., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Removal of pharmaceuticals by clay-polymer sorbents: Batch and filtration experiments

  • Undabeytia López, Tomás
  • López, V.
  • Gómez-Pantoja, Eulalia
  • Gardi, Ido
Significant concerns have been raised up due to the presence of organic micropollutants in surface waters. The ability of two polymer-clay sorbents (Tct-bent; Pnb-bent) based on a functionalized cationic starch was examined for the removal of three pharmaceuticals: atenolol (AT), sulfamethoxaxole (SMX) and diclofenac (DC). In batch experiments, the Tct-bent complex which exhibited a planar conformation of the polymer on the clay surface and higher cationic charge density showed higher sorption of DC and SMX over those of Pnb-bent but similar with AT. An analysis of the sorption by fitting to Langmuir equation showed a preferential sorption of DC over SMX on the polymer-clay complexes: lesser sorption sites (lower Ro) but more energetically favored (higher binding coefficient, KL). The sorption mechanisms of DC and SMX on Tct-bent were determined by thermal and infrared techniques: DC molecules formed an ion pair including hydrogen bonds through their secondary amine groups; SMX sorbed by strong electrostatic interactions followed by proton transfer involving its sulphon-nitrogen group and the hydroxyl moieties of the composite. Filtration experiments showed a better performance of the columns made of Tct-bent on DC and SMX over that of GAC (Figure 1). Accordingly, there are certain pollutants as those capable of protonation in solution (AT) that are sorbed on the developed hydrophobic domains of the polymer but in a smaller extension than GAC. Therefore, further studies should address the possibility of using mixed filters containing polymer-clay composites and GAC for a more efficient filtration. The filtration processes were successfully modeled by using an adsorption-convection model which enabled predictions under different operational conditions., This research was funded by the grant NANOWAT (ref. I-B/2.1/049) within the ENPICBC-MED programme of the European Union, and the Spanish Ministry of Economy and Competitiveness (project CTM2013-42306-R), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Pyrimethanil adsorption on montmorillonite and organo-montmorillonite. Kinetic and equilibirum study.

  • Flores, F. M.
  • Undabeytia López, Tomás
  • Morillo González, Esmeralda
  • Torres Sánchez, R. M.
Comunicación oral presentada en la XVI International Clay Conference from the Oceans to Space 16th ICC – July, 17-21,Granada 2017, In the post-harvest treatment of pears and apples in the Argentinean Patagonia, several pesticides are used [1], including pyrimethanil (PRM), for the storage of fruits. The effluents released by the packing plants originate point source of contamination that should be treated prior to its discharge to natural water-courses. Montmorillonites (Mt) and their exchange products with quaternary ammonium salts, organo-montmorillonites (OrMt), have been used to remove this kind of contaminant [2] as well as metals [3], antibiotics [4], etc. The objective of this work was to study the adsorption of pyrimethanil on Mt and OrMt as well as the adsorption kinetics that manages the process. The adsorption isotherms were fitted to Langmuir, Freundlich and Dubinin-Radushkevitch (D-R) models. For kinetic analysis, three mathematical models were employed: pseudo first order (PFO), pseudo second order (PSO) and intra-particle diffusion model (IDM). The adsorption products were characterized by XRD and FTIR. The OrMt were prepared from didodecyldimethylammonium (DDAB) and octadecyltrimethylammonium (ODTMA) bromides at 150% of the cation exchange capacity (CEC). These adsorbents were named DMt150 and OMt149 for DDAB and ODTMA exchanged raw montmorillonite (Mt), respectively, where the number indicated the surfactant amount exchanged determined by total carbon analysis. The maximum adsorption of PRM was the following: 330, 240 and 156 μmol PRM/g clay, for DMt150, OMt149 and Mt, respectively. The large amount adsorbed by DMt150 sample was assigned to different conformational states of DDAB in the interlayer space [5], due to the presence of two hydrocarbon chains, allowing the entrance of PRM to the interlayer, and conferring greater hydrophobicity than that of OMt149. All adsorbents fitted well to the sorption models, except OMt149 sample that did not fit to Langmuir. The DMt150 sample attained the highest KF value (obtained from the Freundlich model) within the studied samples. The high PRM affinity for DMt150 sample indicated the presence of hydrophobic interactions between the PRM and the organic fraction of the OrMt. The Qmax parameter obtained with D-R model were higher than that obtained with Langmuir model for all samples. The adsorption energy values found by D-R model indicated a physisorption process for PRM adsorption on OrMt samples, supporting the hypothesis of hydrophobic or Van der Waals type interactions. The kinetics experiments indicated that the adsorption process was governed by pseudo-second order kinetics. The XRD analysis indicated an increase of the basal spacing from 1.25 to 1.39 nm for Mt sample after PRM adsorption, assigned to PRM molecules arrangement in a planar conformation. For OrMt, no changes were noticed in the interlayer space after PRM adsorption, which could indicated a shielding of PRM entrance by the presence of the surfactant. FTIR analysis showed that the secondary amino group of PRM was involved in the adsorption process. The appearance of a new band in the Mt-PRM spectra at 1579 cm-1 could indicate the formation of H-bonding through one of the pyrimidine ring nitrogen. Summarizing these results, PRM adsorption increased by the use of DMt150 and OMt149 compared to Mt due mainly to hydrophobic interactions between the PRM and the organic fraction of the OrMt samples., [1] Lombardi B., Baschini M., Torres Sánchez R.M. (2003). Optimization of parameters and adsorption mechanism of thiabendazole fungicide by a montmorillonite of North Patagonia, Argentina. Applied Clay Science, 24:43- 50. [2] Sanchez-Martin M.J., Rodriguez-Cruz M.S., Andrades M.S., Sanchez-Camazano M. (2006). Efficiency of different clay minerals modified with a cationic surfactant in the adsorption of pesticides: Influence of clay type and pesticide hydrophobicity. Applied Clay Science. 31:216- 228. [3] Sarkar B., Naidu R., Megharaj M. (2013). Simultaneous Adsorption of Tri- and Hexavalent Chromium by Organoclay Mixtures. Water, Air & Soil Pollution. 224:1704. [4] Sun K., Shia Y., Chen H., Wang X., Lic Z. (2017). Extending surfactant-modified 2:1 clay minerals for the uptake and removal of diclofenac from water. Journal of Hazardous Materials. 323:567-574. [5] Sagitova E.A., Donfack P., Prokhorov K.A., et al. (2009). Raman spectroscopic characterization of the interlayer structure of Na+-montmorillonite clay modified by ditetradecyl dimethyl ammonium bromide. Journal of Physical Chemistry B. 113:7482-7490., This research was funded by the Spanish Ministry of Economy and Competitiveness through the project CTM2013-42306-R supported by the European Regional Development Fund (FEDER ) and by the Argentine Ministry of Science, Technology and Productive Innovation, FONARSEC project, Nano FS-008/2010., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Slow-release formulations of the herbicide picloram by using Fe–Al pillared montmorillonite

  • Marco-Brown, J. L.
  • Undabeytia López, Tomás
  • Torres Sánchez, R. M.
  • dos Santos Afonso, Maria
11 páginas.-- 8 figuras.-- 4 tablas.-- referencias.-- The online version of this article (doi: 10.1007/s11356-017-8699-9) contains supplementary material, which is available to authorized users., Slow-release formulations of the herbicide picloram (PCM, 4-amino-3,5,6-trichloropyridine-2-carboxylic acid) were designed based on its adsorption on pillared clays (pillared clays (PILCs)) for reducing the water-polluting risk derived from its use in conventional formulations. Fe–Al PILCs were synthesized by the reaction of Na-montmorillonite (SWy-2) with base-hydrolyzed solutions of Fe and Al. The Fe/(Fe + Al) ratios used were 0.15 and 0.50. The PCM adsorption isotherms on Fe–Al PILCs were well fitted to Langmuir and Freundlich models. The PCM adsorption capacity depended on the Fe content in the PILCs. Slow-release formulations were prepared by enhanced adsorption of the herbicide from PCM-cyclodextrin (CD) complexes in solution. CDs were able to enhance up to 2.5-fold the solubility of PCM by the formation of inclusion complexes where the ring moiety of the herbicide was partially trapped within the CD cavity. Competitive adsorption of anions such as sulfate, phosphate, and chloride as well as the FTIR analysis of PCM-PILC complexes provided evidence of formation of inner sphere complexes of PCM-CD on Fe–Al PILCs. Release of the herbicide in a sandy soil was lower from Fe–Al PILC formulations relative to a PCM commercial formulation., The authors acknowledge Universidad de Buenos Aires, Secretaria de Ciencia y Técnica Projects, Ministerio de Ciencia y Técnica, Agencia Nacional de Promoción Científica y Tecnológica, MINCyT-ANPCyT-FONCyT, and Consejo Nacional de Investigaciones Científicas y Técnicas de la República Argentina (CONICET) for financial support. J.L.M-B acknowledges CONICET fellowship. This research was also supported by the MEC Project CTM2013-42306-R and the Junta de Andalucía Project P12-RNM1897. Both projects received funding by the European Social Fund. The authors also acknowledge the Analytical Services of Seville University (CITIUS) for SEM-EDS measurements., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Starch-clay based composites for water purification by filtration

  • Undabeytia López, Tomás
  • Nir, Shlomo
  • Laiz Trobajo, L.
  • Morillo González, Esmeralda
  • Gardi, Ido
  • Lozano, Virginia
Significant concerns have been raised due to increasing pollution of surface and ground waters. In the vast majority of water treatment plants, depth filtration is incorporated through the use of non-compressible filters made of granular activated carbon (GAC), but the efficiency of GAC for removal of pathogens is very poor. In addition, the removal of small organic polar molecules is not usually satisfactory. Therefore, there is a growing interest in the development of composites that improve the performance of GAC or even can be an alternative to its use. The current research describes the synthesis, characterization and potential use of clay-polymer composites for their use in water purification by filtration. The advantages of these clay-polymer composites are that they can be easily scaled for production at industrial levels; and they were formed by inexpensive materials, a day mineral (bentonite), and cationic starches which are widely used as additives in paper-making, textile and cosmetic industry. These starches are derivatized by the introduction of the cationic functional moiety 2-hydroxypropyltrimethylammonium. The interactions of three polymers with different degree of substitution with the surface of a commercial bentonite were examined. Sorption of the polymers and analysis of the surface charge of the complexes formed showed that charge neutralization at the external surface was observed at loadings lower than the CEC of this day. The lower values for the point of zero charge than the CEC of the clay can be explained by the high screening of the clay surface by non-charged segments of the polycation after sorption. The loading of polymer on the clay was highest for the polymer with the lowest charge density adopting a loop-and-train conformation on the clay surface, whereas a planar conformation was elucidated for the other two higher charged polymers. Several polymer-clay complexes were synthesized and tested for the inactivation and killing of the enteroindicator Escherichia coli as a function of the polymer loading and surface charges. The critical parameters affecting the bactericidal activity were the surface potential and the concentration of cationic monomers in excess over that needed for neutralization of the clay surface. The clay-polymer composite with higher bactericidal activity was also tested for the removal of the emerging contaminants diclofenac and sulfamethoxazole. This study showed that the introduction of functional moieties that are capable to create a network of H-bonds with the pollutants promoted their sorption in addition to electrostatic interactions. Filtration experiments showed a better performance of the columns including clay-polymer composites over that of GAC for the removal of E. coli, diclofenac and sulfamethoxazole. The performance of fillers based on the composites under different constructive and operational parameters, such as the flow rate, and concentration of bacteria, or pharmaceuticals added, was investigated and modeled. The success in the modeling of these filtration processes by using an adsorption-convection model enabled predictions under different operational conditions, and economic projections based on the estimated capacity. Since regeneration of the filters was achieved by the use of dilute and inexpensive HCI or NaOCI solutions, implication is that the effective capacity of the filters is larger than that preliminary determined and consequently the price for successive water treatments will be significantly reduced., This research was funded by the grant NANOWAT (ref. [.812.1/049) within the ENPI·CBC-MED programme ofthe European Uníon; and the Spanísh Ministry of Economy and Competitiveness through the project CTM2013·42306-R supported by the European Regional Development Fund (FEDER)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Adsorption of the tallow amine ethoxylate surfactant Ethomeen T/15 on montmorillonite

  • Borrego Sánchez, Ana
  • Gómez-Pantoja, Eulalia
  • Morillo González, Esmeralda
  • Undabeytia López, Tomás
  • Sainz-Díaz, C. Ignacio
11 páginas.-- 12 figuras.-- 29 referencias.-- Supplementary data to this article can be found online at https://doi.org/10.1016/j.clay.2018.03.026., The use of biocompatible surfactants is interesting to increase the properties of clay minerals in an environment-friendly process of charge capacity of organics. The adsorption of the surfactant Ethomeen T/15 in the interlayer space of montmorillonite was studied experimentally and computationally. Different proportions of surfactant, water and phyllosilicate were explored. Calculations at molecular level were performed using forcefields based on empirical interatomic potentials. The surfactant is likely to be adsorbed within the montmorillonite interlayer space forming hydrogen bonds between the H atoms of surfactant and the basal tetrahedral O atoms of the montmorillonite interlayer surface. These hydrogen bonds and the electrostatic interactions between cations and phyllosilicate surface are the main driving forces of the adsorption. Molecular dynamics simulations have indicated several possible conformations of the surfactant molecules in the interlayer space. The combination of molecular modeling, thermal analysis, Fourier transformed infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) has allowed the interpretation of this adsorption process, Authors are thankful to the CSIC Computational Center for computation facilities and the Andalusian RNM-1897 , and the Spanish MINECO CTM2009-07425 , CTM2013-42306-R , FIS2013-48444-C2-2-P , and FIS2016-77692-C2-2-P project grants for the financial support of this research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Removal of pharmaceuticals from water by clay-cationic starch sorbents

  • Lozano, V.
  • Gardi, Ido
  • Nir, Shlomo
  • Undabeytia López, Tomás
9 páginas.--10 figuras.-- 2 tablas.-- 42 referencias.-- Supplementary data related to this article can be found at https://doi.org/10.1016/j.jclepro.2018.04.174., Significant concerns have been raised up due to the presence of organic micropollutants in surface waters. The ability of two polymer-clay sorbents based on a functionalized cationic starch was examined for the removal of three pharmaceuticals: atenolol, sulfamethoxazole and diclofenac sodium. In batch experiments, the complex which exhibited a planar conformation of the polymer on the clay surface and higher cationic charge density showed higher sorption of diclofenac and sulfamethoxazole over those of the composite with a loops and tails configuration, but similar with atenolol. The introduction of functional moieties on the polymers that are capable to create a network of hydrogen-bonds with the pollutants promoted their removal as revealed by thermal and infrared techniques: diclofenac molecules formed an ion pair including hydrogen bonds through their secondary amine groups; sulfamethoxazole sorbed by strong electrostatic interactions followed by proton transfer involving its sulphon-nitrogen group and the hydroxyl moieties of the composite. Filtration experiments showed a better performance of the columns made of the composite with higher cationic charge density on the removal of diclofenac and sulfamethoxazole over that of granular activated carbon. The filtration processes were successfully modeled by using an adsorption-convection model which enabled predictions under different operational conditions used in drinking water plants. Experimental removal of diclofenac by filtration within the range found in environmental concentrations was in good agreement with the predicted amounts., This research was funded by the grant NANOWAT (ref. I-B/2.1/049) within the ENPI-CBC-MED programme of the European Union; and the Spanish Ministry of Economy and Competitiveness through the projects CTM2013-42306-R and CTM2016-77168-R supported by the European Regional Development Fund (FEDER)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Grafted Sepiolites for the Removal of Pharmaceuticals in Water Treatment

  • Undabeytia López, Tomás
  • Madrid Díaz, Fernando
  • Vázquez Cabello, J.
  • Pérez-Martínez, José Ignacio
29 referencias.-, The increased detection of pharmaceuticals in finished drinking water has become a growing cause of concern in recent years. The removal of atenolol, ranitidine, and carbamazepine by sepiolite, following functionalization of its surface by organosilane grafting, constituted the subject of this investigation. Silylated surfaces include octyl, γ-aminopropyl, 3-chloropropyl, and triphenyl moieties. The sorption of atenolol and ranitidine was higher on sepiolite functionalized with 3-chloropropyl, while carbamazepine showed a higher sorption on sepiolite with triphenyl groups. Filtration experiments of both ranitidine and carbamazepine on octyl- and triphenyl-sepiolite, respectively, showed a higher retention of ranitidine in comparison to carbamazepine, in spite of the fact that the number of sorption sites was lower due to its higher binding rate., This research was supported by the MEC projects CTM2013-42306-R and CTM2016-77168-R. Both projects received funding from the European Social Fund., Peer reviewed