Skip to main content

NUEVOS SISTEMAS PARA LA CUANTIFICACION DE METALES TRAZA EN AGUAS BASADOS EN MICROSISTEMAS CAPILARES. AUNANDO EFICACIA, APLICACION Y SOSTENIBILIDAD

CTM2013-47549-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD DE CADIZ

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Multi-elemental ionic liquid-based solvent bar micro-extraction of priority and emerging trace metallic pollutants (Cd, Ag, Pd) in natural waters

  • Herce Sesa, Belén
  • López López, José Antonio
  • Moreno Aguilar, Carlos
Transition metals Cd, Pd and Ag are toxic even at very low concentration. Cd is considered a priority substance; while, Pd and Ag are emerging pollutants. Membrane technologies have been applied for their extraction; however, they require important amounts of reagents, time and energy. Additionally, effective reagents for metal extraction in saline natural waters are limited. In this case, hollow fiber liquid phase micro-extraction with a configuration of solvent bar (SBME) using the ionic liquid Cyphos® 101 as extractant is proposed. Optimized conditions for SBME of Cd, Ag and Pd were 50% Cyphos® 101 in the organic solution, extraction time 30 min and 800 rpm stirring rate. Leaching was in all cases lower than 0.1%. Metallic concentrations were measured by flame atomic absorption spectroscopy. The method was applied to the extraction of Ag, Cd and Pd in natural water samples. Except for waste water, Pd extraction was higher than 90% in all cases. Cd (≈100%) and Ag (93–95%) offered their best results for saline samples. Concluding, the proposed system is a low cost and green methodology that allows a simple and fast extraction of trace pollutants such as Ag, Cd and Pd in different natural waters, including highly saline samples.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Solvent bar micro-extraction (SBME) based determination of PAHs in seawater samples

  • López López, José Antonio
  • Ogalla-Chozas, Esther
  • Lara Martín, Pablo Antonio
  • Pintado Herrera, Marina Guadalupe
Measuring the impact of PAHs in seawater samples is often difficult due to the low concentrations in which they appear and the complexity of the sample matrix. Traditional methods for sample preparation such as liquid-liquid extraction and solid phase extraction require the use of excessive amounts of solvents and reagents, and sample handling. In this work, hollow fiber liquid phase micro-extraction (HFLPME), in the configuration of solvent bar micro-extraction (SBME), was proposed as an environmentally friendly and more effective tool, for the extraction of the 16 priority PAHs from seawater samples. Extraction was conducted using hexane as a solvent. Enrichment factors from 45 to 163 were obtained after 60 min at a stirring rate of 500 rpm in the sample. Moreover, a negative linear relationship was observed between the enrichment factor and the molecular weight of the PAHs. Under optimized conditions, the limits of detection were in the range from 0.21 to 0.82 ng L− 1, the method showed a linear response up to 500 μg L− 1, and the average relative standard deviation for seawater samples spiked with 5 ng L− 1 was 11.6%. After calibration, the SBME was applied to extract PAHs in seawater samples from the Bay of Cadiz (SW Spain), showing an average recovery of 99%. In conclusion, the SBME is an environmentally friendly, one-step alternative for sample preparation in the determination of PAHs in seawater samples.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Determination of silver in seawater by the direct analysis of solvent bars by high resolution continuum source solid sampling graphite furnace atomic absorption spectrometry

  • González-Álvarez, Rafael J.
  • Bellido Milla, Dolores
  • Pinto Ganfornina, Juan José
  • Moreno Aguilar, Carlos
The direct analysis of solvent bars used for silver micro-extraction from seawater samples by high resolution continuum source solid sampling graphite furnace atomic absorption spectroscopy (HR-CS-SS-GF-AAS) has been achieved. Three successive pyrolysis steps at 290 °C, 700 °C and 1000 °C were applied to ensure the elimination of the fumes released during the calcination of the bar prior to the atomization at 1800 °C. Silver micro-extraction with solvent bars was optimised by applying a multivariate strategy. The concentrations of the extracting agent (tri-isobutylphosphine sulphide), reextracting reagent (sodium thiosulfate) and nitrate were studied by using a central composite design based on the surface response methodology. The optimum values were 0.168 mol L-1, 0.033 mol L-1 and 0.159 mol L-1, respectively. Under these conditions, a stirring rate of 1000 rpm and an extraction time of 20 minutes were optimum. Additionally, the effect of chlorides and humic acids was also studied. The method exhibited a repeatability and reproducibility of 1.54% and 2.68%, respectively, with a limit of detection of 2.52 ng L-1 and a linear range up to 334 ng L-1. For the first time, an ultra-trace element (silver at the ng L-1 level) was pre-concentrated and determined in seawater by using a direct solid analysis-based method, simplifying the sample preparation process and avoiding its manipulation. The method was successfully applied to dissolved silver determination in real seawater samples after the micro-extraction process and was validated by comparison with the reference method of liquid-liquid extraction with APDC/DDDC and ICP-MS determination.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

A Green Method for the Determination of Cadmium in Natural Waters Based on Multi-Fibre Supported Liquid Membranes

  • Pinto Ganfornina, Juan José
  • Mánuel Delgado, Victoria
  • Moreno Aguilar, Carlos
Supported liquid membranes have been used to implement a hollow fibre liquid-phase microextraction (HF-LPME) method for the preconcentration of Cd(II) in natural waters as a sample preparation step for its determination by high-resolution continuum source graphite furnace atomic absorption spectrometry (HR-CS-GFAAS). This system was designed to use four hollow fibres simultaneously with the same sample, thus improving the simplicity, speed and reproducibility of the results. The organic liquid membrane bis-(2,4,4-trimethylpentyl) phosphinic acid (Cyanex® 272) dissolved in dihexylether (DHE) was immobilised into the pores of the walls of polypropylene hollow fibres. After extraction, the cadmium-enriched acidic phases were recovered and analysed by triplicate. To optimise the extraction process, the effect of both physical and chemical variables was studied, and optimum results with an enrichment factor (EF) of 292 were obtained for a fibre length of 6 cm, 1.06 M Cyanex 272, 0.04 M HNO3, stirring rate of 600 rpm and an extraction time of 4.26 h. For practical applications, extraction time was reduced to 2 h, keeping the EF as high as 130. Under these conditions, a detection limit of 0.13 ng L-1 Cd(II) was obtained, with a reproducibility of 3.3 % and a linear range up to 3 ug L-1 being achieved. The proposed method was successfully applied to the determination of cadmium in mineral, tap and seawater samples.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Solvent bar micro-extraction: Improving hollow fiber liquid phase micro-extraction applicability in the determination of Ni in seawater samples

  • Pinto Ganfornina, Juan José
  • Martín Barata, Mabel
  • Herce Sesa, Belén
  • López López, José Antonio
  • Moreno Aguilar, Carlos
During the last decade, hollow fiber liquid phase micro-extraction (HF-LPME) has become an attractive alternative in sample treatment for the analysis of trace metals in seawater. If compared with other similar methodologies, its main advantages are associated to a higher stability of the organic solution contained into the pores of the fiber, which acts as a lipophilic membrane during the extraction process. However there are some remaining problems that makes its use difficult, mostly related to the need of increasing the rate of analysis and improving portability. In this paper a novel three phase solvent bar micro-extraction (3PSBME) for the fiber device has been proposed. Its main advantage is that the 3PSBME device can be left free in the sample. This way the system is portable, and no special support is needed leading to the possibility of simultaneous extraction of several samples. In this work, multivariate central composite design of experiment has been carried out to optimize Ni pre-concentration using di-2-ethylhexyl phosphoric acid (DEHPA) as extractant and HNO3 as acceptor agent. Factors influencing extraction have been the pH in the sample and the fiber length. For seawater samples, Ni can be pre-concentrated 11 times in 140 min. The method presents RSD 9.42% and limit of detection 44 ng L−1, using GFAAS for instrumental determination. It has been applied for determination of Ni in seawater, including a reference material CRM-403 proving its applicability.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

A handling-free methodology for rapid determination of Cu species in seawater based on direct solid micro-samplers analysis by high-resolution continuum source graphite furnace atomic absorption spectrometry

  • González-Álvarez, Rafael J.
  • Bellido Milla, Dolores
  • Pinto Ganfornina, Juan José
  • Moreno Aguilar, Carlos
A very simple, sensible and advanced new methodology for the determination of copper species in seawater has been developed. The method consisted of two steps: first a separation/preconcentration of copper species by using liquid phase microextraction-based solvent bars followed by the direct analysis of these solid polymeric micro-samplers in an atomic absorption spectrometer provided with a device for direct analysis. For liquid microextraction, di-2-pyridylketone benzoylhydrazone (dPKBH) dissolved in octan-1-ol was selected as the extracting agent due to its ability to transport inorganic Cu species from seawater samples. The optimum chemical and physical conditions for copper micro-extraction were sample pH 8, a dPKBH concentration of 0.010 mol L−1, a stirring speed of 800 rpm and an extraction time of 10 min. A graphite furnace temperature program was optimised to assure the complete elimination of the solvent bar matrix, and the atomisation step took place at 2200 °C. The method exhibited a limit of detection of 0.026 μg L−1 of copper and a linear range up to 1.50 μg L−1, showing great repeatability and reproducibility (4.07% and 4.43%, respectively). Suitability of the method was confirmed by analysing a certified reference material (CASS-4) under optimum conditions, being the first time ever that a direct solid analysis-based method has been used for the determination of total dissolved copper concentration in seawater. Furthermore, the method was applied to the determination of the operationally defined transportable Cu fraction in seawater samples at natural conditions and the results were compared with theoretical data provided by Visual MINTEQ® 3.1 software. A mathematical model that permits to estimate total dissolved copper concentration was obtained, and the non-transportable copper fraction was calculated by difference
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Analytical Performance of Electromembranes as a Tool for Nanoconcentrations of Silver in Waters

  • Mendiguchía Martínez, Carolina
  • Moreno Aguilar, Carlos
  • Silva García, Macarena
Electromembranes increase the efficiency of metal transport in liquid-phase microextraction systems by applying an electric potential, which accelerates the transport. Nevertheless, to get high extraction percentages in short extraction times it is necessary to take into account a great variety of factors, and multivariate optimization techniques are the best alternative to determine the most influential variables and to optimize the extraction process. In this work, a fractional factorial design was applied to determine the most influential variables in the extraction of silver by electromembranes. Thus, the effect of tri-isobutylphosphine sulphide (Cyanex 471x) concentration in the organic solution, sodium thiosulphate concentration in the acceptor solution, nitrate concentration in the sample solution, extraction time, stirring rate and electric potential on the enrichment factor were studied. Once the most important variables were selected, a small composite design (Draper–Lin) was used to obtain their optimal values to maximize the enrichment factor. Under these conditions, an experimental enrichment factor of 49.91 ± 3.95 was achieved after 22 min. Finally, the effect of saline matrix on the enrichment factor was tested and the optimized system was successfully applied to analyse silver concentrations at ultratrace levels, within the range of 7–29 ng·L−1 in different real seawater samples, 9 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Key factors in electromembrane microextraction systems for metals analysis in natural waters

  • Silva, Macarena
  • Mendiguchía Martínez, Carolina
  • Moreno Aguilar, Carlos
This is an original manuscript of an article published by Taylor & Francis in International Journal of Environmental Analytical Chemistry o 2018, available at: https://doi.org/10.1080/03067319.2018.1533006]., Application of an electric potential to hollow fibre liquid phase microextraction (HF-LPME) systems previously optimised for metals preconcentration from natural waters could improve their analytical performance increasing enrichment factors and reducing operation times. Nevertheless, the effectiveness of the direct application of an electric potential to these systems may be limited due to the effects produced by other operational parameters. In this work, the effect of a variable electric potential on the enrichment factors of four HF-LPME systems used for the analysis of trace metals in natural waters (Cd, Ni, Ag and Cu) has been studied. In addition, the effect of organic phase composition, distance between electrodes and electrodes diameter has been also studied. From the results obtained, composition of organic phase can be considered as the key factor in electromembrane (EME) systems, since its polarity determine the operational range of the applied electric potential and consequently the enrichment factor that could be achieved. EMEs have demonstrated to be a real alternative to preconcentrate Cd, Ag and Cu from natural water samples in very short times (30 min). In fact, enrichment factors increased up to one order of magnitude if compared with HF-LPME methodology without application of an electrical potential.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Improvement of Advanced Sample Preparation Systems for the Determination of Trace Ni in Seawater by Electro-Membranes

  • Pinto Ganfornina, Juan José
  • Mendiguchía Martínez, Carolina
  • López López, José Antonio
  • Martín Barata, Mabel
  • Silva García, Macarena
  • Moreno Aguilar, Carlos
Due to its important environmental role, the analysis of trace metals in natural waters is attracting increasing attention; consequently, faster and more accurate analytical methods are now needed to reach even lower limits of detection. In this work, we propose the use of electro-membrane extraction (EME) to improve analytical methods based on hollow fiber liquid phase micro-extraction (HFLPME). Specifically, an EME-based method for the determination of trace Ni in seawater has been developed, using an HFLPME system with di-2-ethylhexyl phosphoric acid (DEHPA) in kerosene as a chemical carrier, followed by instrumental determination by graphite furnace atomic absorption spectroscopy (GFAAS). Under optimum conditions, Ni was pre-concentrated 180 +/- 17 times after 15 min, using sample pH = 5.5, the concentration of DEHPA 0.9 M in the liquid membranes, and 1.9 M HNO3 in the acceptor solution, as well as an electric potential of 25 V with the sample being stirred at 500 rpm. When compared with other HFLPME systems for pre-concentration of trace Ni in seawater in the absence of electric potential, the enrichment factor was improved 2.2 times, while the time of extraction was reduced an 89%. The limit of detection of the new method was 23.3 ng L-1, and both its applicability and accuracy were successfully evaluated by analyzing Ni concentration in a seawater-certified reference material (BCR-403), showing the reliability of EME for sample preparation in the determination of trace metals in marine water samples.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Application of solvent-bar micro-extraction for the determination of organic and inorganic compounds

  • López López, José Antonio
  • Mendiguchía Martínez, Carolina
  • Pinto Ganfornina, Juan José
  • Moreno Aguilar, Carlos
Solvent bar micro-extraction (SBME) was introduced to improve some aspects of hollow fiber liquid phase micro-extraction. It has rapidly evolved and gained increasing interest. In SBME the fiber can be left freely tumbling in the sample during extraction. Consequently, the procedure is simplified, portability of the micro-extraction system is improved and mass transfer from the sample to the fiber lumen is enhanced, reducing extraction times and allowing the simultaneous extraction of several samples. We present an overview on the evolution and applications of SBME for sample preparation. It has been applied in the analysis of polar and non-polar organic compounds in water, slurry, food, and biological samples. In the case of inorganic analysis, main applications have been directed to their determination and speciation in plants and marine water samples. In conclusion, SBME is a simple, accurate and affordable methodology for sample preparation in environmental, medical and food analytical chemistry