Skip to main content

DESARROLLO, INTERPRETACION Y APLICACION DE TECNICAS EMERGENTES PARA DETERMINAR LA ESPECIACION Y LA DISPONIBILIDAD DE IONES INORGANICOS Y NANOPARTICULAS EN MEDIOS NATURALES

CTM2013-48967-C2-1-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD DE LLEIDA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 28
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Comparison of different speciation techniques to measure Zn availability in hydroponic media

  • Companys Ferran, Encarnació
  • Galceran i Nogués, Josep
  • Puy Llorens, Jaume
  • Sedó, Maria
  • Vera, Ruben
  • Anticó, Enriqueta
  • Fontàs, Claudia
Four analytical techniques are compared: AGNES (Absence of Gradients and Nernstian Equilibrium Stripping), LASV (Anodic Stripping Voltammetry with Linear stripping), DGT (Diffusive Gradients in Thin films) and PIM (Polymer Inclusion Membranes). These techniques have been designed to provide the free ion concentration or a labile fraction, complementarily contributing to an integrated description of speciation and availability. Their simultaneous application to the determination of free Zn concentrations or labile fluxes in seven solutions of a hydroponic medium reveals characteristics of each technique and correlations between their results. All dynamic results can be interpreted in terms of a general theoretical framework on fluxes. Indeed, in techniques under diffusion-limited conditions in the sample, the flux can be split into the free contribution (linearly proportional to the free fraction), plus the contribution of the complexes (where mobility, lability and abundance of complexation are intertwined). A methodology to compute lability degrees is developed. Measurements with PIM devices confirm that diffusion in the sample solution is not rate limiting, so its flux is proportional to the free metal in the donor solution. A proportionality between the responses of any given two techniques is observed, which suggests that, for the low ligand-to-metal concentration ratios used in the present work, any of these techniques would correlate similarly with uptake, toxic or nutritional measurements., This work was financially supported by the Spanish Ministry of Education and Science (projects CTM2013-48967 and CTM2016-78798). Alexandra Altier's help with DGT experiments is acknowledged.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Determination of the free metal Ion concentration using AGNES Implemented with environmentally friendly bismuth film electrodes

  • Rocha, Luciana S.
  • Galceran i Nogués, Josep
  • Puy Llorens, Jaume
  • Pinheiro, Jose Paulo
Ex-situ plated Bi film electrodes (Bi-FE) have been employed, for the first time, to measure the free concentration of Pb(II) in aqueous solutions using AGNES (Absence of Gradients and Nernstian Equilibrium Stripping) with Stripping Chronopotentiometry (SCP) quantification. The amount of deposited Pbº, below a certain threshold, follows a Nernstian relationship with the applied potential. This threshold can be interpreted as the frontier of transition from surface deposition to solid (bulk) formation of Pbº. AGNES with Bi-FE yielded a very good detection limit (3σ) for Pb(II) of 6.0×10-9 M with an applied gain of 398 and a deposition time of 400 s. The ability of the Bi film electrode to perform speciation measurements was demonstrated for Pb(II)-PSS and Pb(II)-IDA systems. The measured values with the Bi-FE were in good agreement with the values obtained using the Hg film electrode and/or the values reported in the literature., The authors thank Nuno G. Alves, Ana M. Rosa da Costa, and José A. Moreira for the synthesis of polystyrenesulfonate polymer. This work is supported by Portuguese funding through Fundação para a Ciência e a Tecnologia (Grant FCTANR/AAG-MAA/0065/2012), Faculdade de Ciências e Tecnologia (Grants Pest-OE/EQB/LA0023/2013 and PEst- OE/QUI/UI4023/2014), and by the Spanish Ministry of Science (Projects CTM2012-39183 and CTM2013-48967). L.S. Rocha also thanks FCT Project FCTANR/AAG-MAA/ 0065/2012 for her grant.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Influence of the settling of the resin beads on diffusion gradients in thin films measurements

  • Jiménez-Piedrahita, Martín
  • Altier Infantes, Alexandra
  • Cecilia Averós, Joan
  • Rey-Castro, Carlos
  • Galceran i Nogués, Josep
  • Puy Llorens, Jaume
Binding resin beads used in DGT (Diffusion Gradients in Thin films) tend to settle to one side of the resin during casting. This phenomenon might be relevant for metal accumulation when partially labile complexes dominate the metal speciation, especially after recognizing the important role played by complex dissociation in the resin domain. The influence of the inhomogeneity of the binding agent distribution on metal accumulation is here assessed by numerical simulation of DGT devices with binding beads in only one half of the resin disc, as a reasonable model of the standard resin discs. Results indicate that a decrease in mass accumulation of less than 13% can arise in these inhomogeneous devices (as compared with an ideal disc with homogeneous dispersion of the resin beads) when complexes with stability constant K<1E2m3 mol−1 (K<1E5 L mol−1) dominate the metal speciation. The loss increases as K increases, but the percentage of mass loss always remains lower than the volume fraction of resin disc without beads. For very labile or inert complexes, the impact of the inhomogeneous distribution of binding resin beads is negligible. As kinetic dissociation constants of complexes can be estimated from the distribution of the metal accumulation in a DGT device with a stack of two resin discs, the influence of the inhomogeneity on the recovered kinetic constant is also assessed. For the cases studied, the recovered kinetic dissociation constant, kd,recoveredkd,recovered, retains the correct order of magnitude, being related to the true kd by kd ≈ f −1 x kd(recovered), quite independently of K and kd values, being f the fraction of volume of the resin disc where resin beads are dispersed., Financial support from the Spanish Ministry of Education and Science (Projects CTM2012-39183 and CTM2013-48967) is acknowledged. MJP acknowledges support from UdL and AA from MINECO BES-2013-065173.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Extending the use of Diffusive Gradients in Thin Films (DGT) to solutions where competition, saturation, and kinetic effects are not negligible

  • Jiménez-Piedrahita, Martín
  • Altier Infantes, Alexandra
  • Cecilia Averós, Joan
  • Puy Llorens, Jaume
  • Galceran i Nogués, Josep
  • Rey-Castro, Carlos
  • Zhang, Hao
  • Davison, William
DGT (Diffusion Gradients in Thin films) was designed to sample trace metals in situ at their natural concentrations. The setup and the experimental deployment conditions were established to allow interpretation of a linear accumulation of metal with time, using a simple expression based on a steady-state flux under perfect sink conditions. However, the extension of DGT to a wide range of analytes and its use under varied conditions has shown that, in some situations, these conditions are not fulfilled, so that accumulations with time are nonlinear. Previously, when such curvature was observed, concentrations in solution could not be reliably calculated. Here, we present fundamentally derived equations that reproduce the time accumulation for three situations: (i) kinetic limitations in the binding to the resin, (ii) saturation or equilibrium effects, or (iii) non-negligible competitive effects. We show how the accumulations can be quantified, in terms of the required kinetic and thermodynamic constants, and provide practical guidance for their use to obtain reliable estimates of solution concentrations. Solutions containing Mg or Mn, where all three situations can prevail, are used as examples. Calculated concentrations show reasonable agreement with the experimentally known values and with the results of a numerical model of the system, significantly improving, the estimations based on perfect sink conditions., Such an approach opens up the possibility of using DGT more widely in challenging systems and allows DGT data to be interpreted more fully., Financial support from FEDER and the Spanish Ministry of Education and Science (Project Nos. CTM2012-39183, CTM2013-48967 and CTM2016-78798) is gratefully acknowl- edged
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Dynamics of trace metal sorption by an ion-exchange chelating resin described by a mixed intraparticle/film diffusion transport model. The Cd/Chelex case

  • Quattrini, Federico
  • Galceran i Nogués, Josep
  • David, Calin
  • Puy Llorens, Jaume
  • Alberti, Giancarla
  • Rey-Castro, Carlos
The time-evolution of Cd2+ ion sorption by Chelex 100 resin was studied in batch experiments as a function of time, pH, ionic strength, stirring rate, mass of resin and initial metal ion concentration. In the experimental conditions, the amount of resin sites are in excess with respect to the amount of metal ion, leading to extensive depletion of metal in bulk solution when equilibrium is reached. The data were described using a mixed control mass transport model in finite volume conditions (MCM) that includes explicitly both intraparticle and film diffusion steps. Exact numerical computations and a new approximate analytical expression of this model are reported here. MCM successfully predicts the influence of pH and ionic strength on the experimental Cd(II)/Chelex kinetic profiles (which cannot be justified by a pure film diffusion controlled mechanism) with a minimum number of fitting parameters. The overall diffusion coefficient inside the resin was modelled in terms of the Donnan factor and the resin/cation binding stability constant. The values of the latter coefficient as a function of pH and ionic strength were estimated from the Gibbs-Donnan model. Even though MCM is numerically more involved than models exclusively restricted to film or intraparticle diffusion control, it proves to be accurate in a wider range of values of the mass transfer Biot number and solution/resin metal ratios., The authors gratefully acknowledge support for this research from the Spanish Ministry MINECO (Projects CTM2013-48967 and CTM2016-78798) and by the “Comissionat d'Universitats i Recerca de la Generalitat de Catalunya” (2014SGR1132). FQ acknowledges a grant from AGAUR.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Prepartum blood lead concentrations linked to subsequent cyclicity in high-producing dairy cows in a non-industrial area

  • García Ispierto, Irina
  • López-Helguera, Irene
  • Ramos Girona, Antonio J.
  • Marín Sillué, Sònia
  • Companys Ferran, Encarnació
  • Puy Llorens, Jaume
  • Galceran i Nogués, Josep
  • De Rensis, F.
  • López Gatius, Fernando
This study sought to identify the possible presence of lead (Pb) in blood and if detected to examine the relationship between blood Pb concentrations during the transition period and subsequent reproductive performance in high-producing dairy cows reared in a non-industrial area. Forty seven multiparous dairy cows were examined and/or sampled on Days 251-257 of gestation (visit 1,V1), the day of calving (V2) and on Days 8-14 (V3), 15-21 (V4), 22-28 (V5), 29-35 (V6), 36-42 (V7) and 50-56 (V8) postpartum. A mean level of 130±17 ppm (± SD) of Pb was detected in feed samples. Blood samples were collected for Pb determination from V1 to V5 and lead was present in all collected blood samples. One unit increase in blood Pb concentration in the V1 sample led to a 0.3-fold reduction (P=0.02) in the likelihood of a cow being cyclic. Mean blood Pb concentrations were 0.97±0.11 and 2.6±0.1 μg/L for cyclic (n=24) and non-cyclic (n=23) cows, respectively. Cows with a body condition score (BCS) loss of ≥0.75 units between V1 and V4 (n=24) showed higher Pb concentrations throughout the study period than the remaining cows (n=23; P <0.001). In conclusion, blood Pb levels were detected in all cows. Prepartum blood Pb concentrations were negatively related to subsequent cyclicity. Cows with higher Pb levels experienced a greater BCS loss during the transition period. Routine blood Pb tests could indicate a higher risk of anoestrus in cows with higher Pb concentrations., The authors would like to thank the owners and staff of the farm for their cooperation, and Ana Burton for editorial assistance. Funding from the Spanish Ministry of Science (projects CTM2012-39183 and CTM2013-48967) is also acknowledged.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Accumulation of Mg to Diffusive Gradients in Thin Films (DGT) devices: Kinetic and thermodynamic effects of the ionic strength

  • Altier Infantes, Alexandra
  • Jiménez-Piedrahita, Martín
  • Rey-Castro, Carlos
  • Cecilia Averós, Joan
  • Galceran i Nogués, Josep
  • Puy Llorens, Jaume
Availability of magnesium is a matter of concern due to its role in many environmental and biological processes. Diffusive Gradients in Thin Films (DGT) devices can measure Mg availability in situ. This work shows that Mg accumulation in water largely increases when ionic strength (I) decreases. This phenomenon can be explained from (i) the increase of both the association equilibrium (K) and rate (ka,R) constants for the reaction between Mg cations and resin sites, and (ii) the growing contribution of the partitioning of Mg cations at the resin–gel interface, as I decreases. Two theoretical models that take into account electrical interactions among Mg cations, background electrolyte, and resin sites can successfully be used to determine ka,R and K at each I. Both models yield similar ka,R values, which fulfill an expression for the kinetic salt effect. For freshwater (with a typical salinity of 10 mM and circumneutral pH), the binding of Mg is so fast and strong that the simplest perfect-sink DGT expression can be helpful to predict (overestimation lower than 5%) the accumulation in solutions with Mg concentrations up to 1 mM whenever the deployment time is below 9 h. Perfect sink conditions can still be applied for longer times, in systems with either a lower I or a lower Mg concentration., Financial support from FEDER and the Spanish Ministry of Education and Science (Projects CTM2012-39183 and CTM2013-48967) is gratefully acknowledged.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Metal (Pb, Cd, and Zn) Binding to Diverse Organic Matter Samples and Implications for Speciation Modeling

  • Chen, Weibin
  • Guéguen, Céline
  • Smith, D. Scott
  • Galceran i Nogués, Josep
  • Puy Llorens, Jaume
  • Companys Ferran, Encarnació
This study evaluated the influence of dissolved organic matter (DOM) properties on the speciation of Pb, Zn and Cd. Six DOM samples were categorized into autochthonous and allochthonous source based on their absorbance and fluorescence properties. The concentration of free metal ions (CM2+) measured by titration using Absence of Gradient and Nernstian Equilibrium Stripping (AGNES) was compared with that predicted by Windermere Humic Aqueous Model (WHAM). At the same binding condition (pH, dissolved organic carbon, ionic strength, and total metal concentration) the allochthonous DOM showed a higher level of Pb binding than the autochthonous DOM (84- to 504-fold CPb2+ variation). This dependency, however, was less pronounced for Zn (12- to 74-fold CZn2+ variation) and least for Cd (2- to 14-fold CCd2+ variation). The WHAM performance was affected by source variation through the active DOM fraction (F). The commonly used F = 1.3 provided reliable CPb2+ for allochthonous DOMs and acceptable CCd2+ for all DOM, but significantly underpredicted CPb2+ and CZn2+ for autochthonous DOM. Adjusting F improved CM2+ predictions, but the optimum F values were metal-specific (e.g., 0.03 - 1.9 for Pb), as showed by linear correlations with specific optical indexes. The results indicate a potential to improve WHAM by incorporating rapid measurement of DOM optical properties for site-specific F., This work was financially supported by the Canada Research Chairs program (C.G.), and the Natural Sciences and Engineering Research Council of Canada (C.G. and D.S.S.). The authors also thank Dr. Chad Cuss for the help with data analysis. J.G., J.P., and E.C. gratefully acknowledge support for this research from the Spanish Ministry of Economy, Industry and Competitiveness MINECO (project nos. CTM2013-48967 and CTM2016-78798). The three anonymous reviewers are also acknowledged for their constructive comments that helped improve the manuscript.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Free Zn2+ determination in systems with Zn-Glutathione

  • Lao, Mireia
  • Dago Busquets, Àngela
  • Serrano, N.
  • Companys Ferran, Encarnació
  • Puy Llorens, Jaume
  • Galceran i Nogués, Josep
Zn-Glutathione speciation was studied applying the electrochemical technique AGNES (Absence of Gradients and Nernstian Equilibrium Stripping) to determine the free zinc concentration. In titrations varying either pH, total concentration of gluthatione (cT,GSH) or total concentration of Zn (cT,Zn), free Zn concentrations determined with AGNES were compared with the values predicted from previously reported complexation constants. The speciation of Zn was studied in a real sample of root extracts of Hordeum vulgare where the cT,Zn had been determined by ICP-MS and cT,GSH by HPLC. The free [Zn2+] was measured with AGNES using a special device where a mixture of N2/CO2 saturated in milliQ water controls the pH and avoids the evaporation of the sample. The lower free zinc concentration determined with AGNES, in comparison with the predicted one assuming the literature complexation constants and taking into account only the presence of Zn and GSH, indicates that it is necessary to include more ligands apart from GSH (as other phytochelatins) in the speciation model., The authors gratefully acknowledge support of this research by the Spanish Ministry Spanish Ministry of Education and Science (Projects CTQ2009-07831, CTM2012-39183, CTQ2012-32863 and CTM2013-48967) and by the "Comissionat d'Universitats i Recerca de la Generalitat de Catalunya” (2014SGR269 and 2014SGR1132). ML acknowledges a FPI grant from the Spanish Ministry.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Theoretical aspects of dynamic metal speciation with electrochemical techniques

  • Puy Llorens, Jaume
  • Galceran i Nogués, Josep
Understanding the reaction-diffusion processes of metal species is essential for an adequate description and control of metal availability. Electroanalytical techniques are well suited to probe dynamic speciation in aqueous systems, because transport and reaction influence the current. This short review hinges on the quantification of the contribution of complexes to the resulting flux via the lability degree, while highlighting extensions and other approaches. The reaction scheme is the Chemical Electrochemical (CE) mechanism, but special emphasis is focussed in mixtures of ligands given their relevance in natural waters. Despite the intensive theoretical work devoted to dynamic speciation, there is still a need of further progress, especially regarding heterogeneous ligands, nanoparticles, etc. Rigorous numerical solutions are progressively more accessible. Analytical contributions are usually restricted to limiting cases, but greatly facilitate the physicochemical interpretation of complex systems., The authors gratefully acknowledge support for this research from the Spanish Ministry MINECO (Projects CTM2013-48967 and CTM2016-78798) and by the “Comissionat d'Universitats i Recerca de la Generalitat de Catalunya” (2014SGR1132).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Free indium concentration determined with AGNES

  • Tehrani, Marjan H.
  • Companys Ferran, Encarnació
  • Dago Busquets, Àngela
  • Puy Llorens, Jaume
  • Galceran i Nogués, Josep
Indium is increasingly used in electronic devices, from which it can be mobilized towards environmental compartments. Speciation of In in waters is important for its direct ecotoxicological effects, as well as for the fate of this element in the environment (e.g. fluxes from or towards sediments). Free indium concentrations in the environment can be extremely low due to hydrolysis, especially important in trivalent cations, to precipitation and to complexation with different ligands. In this work, the free indium concentration (which is a toxicologically and geochemically relevant fraction) in aqueous solutions at pH 3 has been measured with an adapted version of the electroanalytical technique AGNES (Absence of Gradients and Nernstian Equilibrium Stripping). Speciation measurements in mixtures of indium with the ligands NTA (nitrilotriacetic acid) and oxalate indicate that the values of their stability constants in the NIST46.6 database are less adequate than those published in some more recent literature. The extraordinary lability and mobility of In-oxalate complexes allow the measuring of free indium concentrations below nanomol/liter in just 25 s of deposition time., The authors gratefully acknowledge support for this research from the Spanish Ministry MINECO (Projects CTM2013-48967 and CTM2016-78798). MHT acknowledges the Generalitat of Catalonia for a Ph.D. grant (FI AGAUR).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Free Zn2+ determination in natural freshwater of the Pyrenees: towards on-site measurements with AGNES

  • Parat, C.
  • Authier, L.
  • Castetbon,A.
  • Aguilar, David
  • Companys Ferran, Encarnació
  • Puy Llorens, Jaume
  • Galceran i Nogués, Josep
  • Potin-Gautier, M.
An on-site methodology has been developed for the direct determination of free Zn2+ with AGNES (Absence of Gradients and Nernstian Equilibrium Stripping) in freshwaters. This implementation includes: i) the use of screen printed electrodes, which provide good limits of detection and easy transportation and deployment; ii) no need for sample purging; iii) a calibration in a synthetic river solution that reproduces well the speciation changes of the natural samples and allows the oxygen interferences to be minimised; iv) the addition of a background electrolyte up to 0.01 mol L-1 in both the calibration and freshwater samples; v) chemical stripping chronopotentiometry as the quantification stage of AGNES. This procedure minimizes the effects of working at low ionic strength and in the presence of dissolved oxygen. In the laboratory, the methodology was checked with different natural samples taken from rivers Garonne, Gave de Cauterets and Gave de Pau in the Pyrenees. Results appeared in good agreement with theoretical estimations computed from Visual Minteq. On-site measurements were performed for the first time with AGNES in the Gave de Cauterets in Soulom (France) and the results were corroborated with purged measurements performed in the laboratory., English language editing by Holly Pearson is acknowledged. The authors acknowledge support for this research from the Communaut e d’Agglom eration de Pau Pyr en ees (CDAPP), from the Spanish Ministerio de Ciencia e Innovacio´n (project numbers CTM2012–39183 and CTM2013– 48967), from the European Community EFA15/08 (PyrMet) and from the Comissionat d’Universitats i Recerca de la Generalitat de Catalunya (project number 2014SGR1132).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

AGNES at vibrated gold microwire electrode for the direct quantification of free copper concentrations

  • Domingos, Rute F.
  • Carreira, Sara
  • Galceran i Nogués, Josep
  • Salaün, Pascal
  • Pinheiro, Jose Paulo
The free metal ion concentration and the dynamic features of the metal species are recognized as key to predict metal bioavailability and toxicity to aquatic organisms. Quantification of the former is, however, still challenging. In this paper, it is shown for the first time that the concentration of free copper (Cu2+) can be quantified by applying AGNES (Absence of Gradients and Nernstian equilibrium stripping) at a solid gold electrode. It was found that: i) the amount of deposited Cu follows a Nernstian relationship with the applied deposition potential, and ii) the stripping signal is linearly related with the free metal ion concentration. The performance of AGNES at the vibrating gold microwire electrode (VGME) was assessed for two labile systems: Cu-malonic acid and Cu-iminodiacetic acid at ionic strength 0.01 M and a range of pH values from 4.0 to 6.0. The free Cu concentrations and conditional stability constants obtained by AGNES were in good agreement with stripping scanned voltammetry and thermodynamic theoretical predictions obtained by Visual MinteQ. This work highlights the suitability of gold electrodes for the quantification of free metal ion concentrations by AGNES. It also strongly suggests that other solid electrodes may be well appropriate for such task. This new application of AGNES is a first step towards a range of applications for a number of metals in speciation, toxicological and environmental studies for the direct determination of the key parameter that is the free metal ion concentration., Funding for this work was provided by (i) Fundação para a Ciência e Tecnologia (FCT, Portugal): Science 2008 IST-CQE3 “Environmental Chemistry” Assistant Researcher position to RFD and Project PTDC/AAC-AMB/110595/2009, and (ii) ANR (Agence national de recherché) - FCT project N°12-IS06-0001 - SPECIES: “Mesure in situ de la spéciation des métaux trace”, by ANR Project NormaRHIZO. JG acknowledges financial support from the Spanish Ministry of Education and Science (project CTM2013-48967).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

New methodology to measure low free indium (III) concentrations based on the determination of the lability degree of indium complexes. Assessment of In(OH)3 solubility product

  • Tehrani, Marjan H.
  • Companys Ferran, Encarnació
  • Dago Busquets, Àngela
  • Puy Llorens, Jaume
  • Galceran i Nogués, Josep
The vast industrial and consumer application of indium (solar cells, displays, etc.) risks its eventual leakage to the environment. Given the relevant role of speciation on the ecotoxicological effects of a certain total amount of indium, it is crucial to develop proper techniques to determine free concentrations of indium. The electroanalytical technique AGNES (Absence of Gradients and Nernstian Equilibrium Stripping) has already proved useful in such a goal. However, the optimization of suitable deposition times in some conditions might be laborious. This work presents a new strategy, based on the technique ADLC (Accumulation under Diffusion Limited Conditions), to determine lability degrees, which apart from their intrinsic physicochemical interest -by comparing reaction kinetics with diffusion rates-, provide useful guidelines for AGNES deposition times. The suggested novel methodology is illustrated with: i) the computation of lability degrees of indium-oxalate complexes (unreported up to date) and ii) measuring free concentration of indium (for the first time as low as pmol L-1) in precipitated solutions (i.e. containing precipitated indium hydroxide in the electrochemical cell). The method takes advantage of the fact that the addition of a suitable concentration of oxalate does not change the free indium concentration (which is buffered due to the existing precipitate at a fix pH), but creates a large amount of labile and mobile indium complexes that contribute to the desired accumulation at very large gains (preconcentration factors). Results confirm the validity of the solubility product of indium hydroxide reported in the database NIST 46.7, The authors gratefully acknowledge support for this research from the Spanish Ministry MINECO (Projects CTM2013-48967 and CTM2016-78798-C2-1-P). MHT acknowledges the Generalitat of Catalonia for a Ph.D. grant (FI AGAUR). The constructive suggestions of three anonymous reviewers are also acknowledged.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Extending the use of Diffusive Gradients in Thin Films (DGT) to solutions where competition, saturation, and kinetic effects are not negligible

  • Jiménez-Piedrahita, Martín
  • Altier Infantes, Alexandra
  • Cecilia Averós, Joan
  • Puy Llorens, Jaume
  • Galceran i Nogués, Josep
  • Rey-Castro, Carlos
  • Zhang, Hao
  • Davison, William
DGT (Diffusion Gradients in Thin films) was designed to sample trace metals in situ at their natural concentrations. The setup and the experimental deployment conditions were established to allow interpretation of a linear accumulation of metal with time, using a simple expression based on a steady-state flux under perfect sink conditions. However, the extension of DGT to a wide range of analytes and its use under varied conditions has shown that, in some situations, these conditions are not fulfilled, so that accumulations with time are nonlinear. Previously, when such curvature was observed, concentrations in solution could not be reliably calculated. Here, we present fundamentally derived equations that reproduce the time accumulation for three situations: (i) kinetic limitations in the binding to the resin, (ii) saturation or equilibrium effects, or (iii) non-negligible competitive effects. We show how the accumulations can be quantified, in terms of the required kinetic and thermodynamic constants, and provide practical guidance for their use to obtain reliable estimates of solution concentrations. Solutions containing Mg or Mn, where all three situations can prevail, are used as examples. Calculated concentrations show reasonable agreement with the experimentally known values and with the results of a numerical model of the system, significantly improving, the estimations based on perfect sink conditions., Such an approach opens up the possibility of using DGT more widely in challenging systems and allows DGT data to be interpreted more fully., Financial support from FEDER and the Spanish Ministry of Education and Science (Project Nos. CTM2012-39183, CTM2013-48967 and CTM2016-78798) is gratefully acknowl- edged
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Prepartum blood lead concentrations linked to subsequent cyclicity in high-producing dairy cows in a non-industrial area

  • García Ispierto, Irina
  • López-Helguera, Irene
  • Ramos Girona, Antonio J.
  • Marín Sillué, Sònia
  • Companys Ferran, Encarnació
  • Puy Llorens, Jaume
  • Galceran i Nogués, Josep
  • De Rensis, F.
  • López Gatius, Fernando
This study sought to identify the possible presence of lead (Pb) in blood and if detected to examine the relationship between blood Pb concentrations during the transition period and subsequent reproductive performance in high-producing dairy cows reared in a non-industrial area. Forty seven multiparous dairy cows were examined and/or sampled on Days 251-257 of gestation (visit 1,V1), the day of calving (V2) and on Days 8-14 (V3), 15-21 (V4), 22-28 (V5), 29-35 (V6), 36-42 (V7) and 50-56 (V8) postpartum. A mean level of 130±17 ppm (± SD) of Pb was detected in feed samples. Blood samples were collected for Pb determination from V1 to V5 and lead was present in all collected blood samples. One unit increase in blood Pb concentration in the V1 sample led to a 0.3-fold reduction (P=0.02) in the likelihood of a cow being cyclic. Mean blood Pb concentrations were 0.97±0.11 and 2.6±0.1 μg/L for cyclic (n=24) and non-cyclic (n=23) cows, respectively. Cows with a body condition score (BCS) loss of ≥0.75 units between V1 and V4 (n=24) showed higher Pb concentrations throughout the study period than the remaining cows (n=23; P <0.001). In conclusion, blood Pb levels were detected in all cows. Prepartum blood Pb concentrations were negatively related to subsequent cyclicity. Cows with higher Pb levels experienced a greater BCS loss during the transition period. Routine blood Pb tests could indicate a higher risk of anoestrus in cows with higher Pb concentrations., The authors would like to thank the owners and staff of the farm for their cooperation, and Ana Burton for editorial assistance. Funding from the Spanish Ministry of Science (projects CTM2012-39183 and CTM2013-48967) is also acknowledged.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

New methodology to measure low free indium (III) concentrations based on the determination of the lability degree of indium complexes. Assessment of In(OH)3 solubility product

  • Tehrani, Marjan H.
  • Companys Ferran, Encarnació
  • Dago Busquets, Àngela
  • Puy Llorens, Jaume
  • Galceran i Nogués, Josep
The vast industrial and consumer application of indium (solar cells, displays, etc.) risks its eventual leakage to the environment. Given the relevant role of speciation on the ecotoxicological effects of a certain total amount of indium, it is crucial to develop proper techniques to determine free concentrations of indium. The electroanalytical technique AGNES (Absence of Gradients and Nernstian Equilibrium Stripping) has already proved useful in such a goal. However, the optimization of suitable deposition times in some conditions might be laborious. This work presents a new strategy, based on the technique ADLC (Accumulation under Diffusion Limited Conditions), to determine lability degrees, which apart from their intrinsic physicochemical interest -by comparing reaction kinetics with diffusion rates-, provide useful guidelines for AGNES deposition times. The suggested novel methodology is illustrated with: i) the computation of lability degrees of indium-oxalate complexes (unreported up to date) and ii) measuring free concentration of indium (for the first time as low as pmol L-1) in precipitated solutions (i.e. containing precipitated indium hydroxide in the electrochemical cell). The method takes advantage of the fact that the addition of a suitable concentration of oxalate does not change the free indium concentration (which is buffered due to the existing precipitate at a fix pH), but creates a large amount of labile and mobile indium complexes that contribute to the desired accumulation at very large gains (preconcentration factors). Results confirm the validity of the solubility product of indium hydroxide reported in the database NIST 46.7, The authors gratefully acknowledge support for this research from the Spanish Ministry MINECO (Projects CTM2013-48967 and CTM2016-78798-C2-1-P). MHT acknowledges the Generalitat of Catalonia for a Ph.D. grant (FI AGAUR). The constructive suggestions of three anonymous reviewers are also acknowledged.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Theoretical aspects of dynamic metal speciation with electrochemical techniques

  • Puy Llorens, Jaume
  • Galceran i Nogués, Josep
Understanding the reaction-diffusion processes of metal species is essential for an adequate description and control of metal availability. Electroanalytical techniques are well suited to probe dynamic speciation in aqueous systems, because transport and reaction influence the current. This short review hinges on the quantification of the contribution of complexes to the resulting flux via the lability degree, while highlighting extensions and other approaches. The reaction scheme is the Chemical Electrochemical (CE) mechanism, but special emphasis is focussed in mixtures of ligands given their relevance in natural waters. Despite the intensive theoretical work devoted to dynamic speciation, there is still a need of further progress, especially regarding heterogeneous ligands, nanoparticles, etc. Rigorous numerical solutions are progressively more accessible. Analytical contributions are usually restricted to limiting cases, but greatly facilitate the physicochemical interpretation of complex systems., The authors gratefully acknowledge support for this research from the Spanish Ministry MINECO (Projects CTM2013-48967 and CTM2016-78798) and by the “Comissionat d'Universitats i Recerca de la Generalitat de Catalunya” (2014SGR1132).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Influence of the settling of the resin beads on diffusion gradients in thin films measurements

  • Jiménez-Piedrahita, Martín
  • Altier Infantes, Alexandra
  • Cecilia Averós, Joan
  • Rey-Castro, Carlos
  • Galceran i Nogués, Josep
  • Puy Llorens, Jaume
Binding resin beads used in DGT (Diffusion Gradients in Thin films) tend to settle to one side of the resin during casting. This phenomenon might be relevant for metal accumulation when partially labile complexes dominate the metal speciation, especially after recognizing the important role played by complex dissociation in the resin domain. The influence of the inhomogeneity of the binding agent distribution on metal accumulation is here assessed by numerical simulation of DGT devices with binding beads in only one half of the resin disc, as a reasonable model of the standard resin discs. Results indicate that a decrease in mass accumulation of less than 13% can arise in these inhomogeneous devices (as compared with an ideal disc with homogeneous dispersion of the resin beads) when complexes with stability constant K<1E2m3 mol−1 (K<1E5 L mol−1) dominate the metal speciation. The loss increases as K increases, but the percentage of mass loss always remains lower than the volume fraction of resin disc without beads. For very labile or inert complexes, the impact of the inhomogeneous distribution of binding resin beads is negligible. As kinetic dissociation constants of complexes can be estimated from the distribution of the metal accumulation in a DGT device with a stack of two resin discs, the influence of the inhomogeneity on the recovered kinetic constant is also assessed. For the cases studied, the recovered kinetic dissociation constant, kd,recoveredkd,recovered, retains the correct order of magnitude, being related to the true kd by kd ≈ f −1 x kd(recovered), quite independently of K and kd values, being f the fraction of volume of the resin disc where resin beads are dispersed., Financial support from the Spanish Ministry of Education and Science (Projects CTM2012-39183 and CTM2013-48967) is acknowledged. MJP acknowledges support from UdL and AA from MINECO BES-2013-065173.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Free Zn2+ determination in systems with Zn-Glutathione

  • Lao, Mireia
  • Dago Busquets, Àngela
  • Serrano, N.
  • Companys Ferran, Encarnació
  • Puy Llorens, Jaume
  • Galceran i Nogués, Josep
Zn-Glutathione speciation was studied applying the electrochemical technique AGNES (Absence of Gradients and Nernstian Equilibrium Stripping) to determine the free zinc concentration. In titrations varying either pH, total concentration of gluthatione (cT,GSH) or total concentration of Zn (cT,Zn), free Zn concentrations determined with AGNES were compared with the values predicted from previously reported complexation constants. The speciation of Zn was studied in a real sample of root extracts of Hordeum vulgare where the cT,Zn had been determined by ICP-MS and cT,GSH by HPLC. The free [Zn2+] was measured with AGNES using a special device where a mixture of N2/CO2 saturated in milliQ water controls the pH and avoids the evaporation of the sample. The lower free zinc concentration determined with AGNES, in comparison with the predicted one assuming the literature complexation constants and taking into account only the presence of Zn and GSH, indicates that it is necessary to include more ligands apart from GSH (as other phytochelatins) in the speciation model., The authors gratefully acknowledge support of this research by the Spanish Ministry Spanish Ministry of Education and Science (Projects CTQ2009-07831, CTM2012-39183, CTQ2012-32863 and CTM2013-48967) and by the "Comissionat d'Universitats i Recerca de la Generalitat de Catalunya” (2014SGR269 and 2014SGR1132). ML acknowledges a FPI grant from the Spanish Ministry.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Metal (Pb, Cd, and Zn) Binding to Diverse Organic Matter Samples and Implications for Speciation Modeling

  • Chen, Weibin
  • Guéguen, Céline
  • Smith, D. Scott
  • Galceran i Nogués, Josep
  • Puy Llorens, Jaume
  • Companys Ferran, Encarnació
This study evaluated the influence of dissolved organic matter (DOM) properties on the speciation of Pb, Zn and Cd. Six DOM samples were categorized into autochthonous and allochthonous source based on their absorbance and fluorescence properties. The concentration of free metal ions (CM2+) measured by titration using Absence of Gradient and Nernstian Equilibrium Stripping (AGNES) was compared with that predicted by Windermere Humic Aqueous Model (WHAM). At the same binding condition (pH, dissolved organic carbon, ionic strength, and total metal concentration) the allochthonous DOM showed a higher level of Pb binding than the autochthonous DOM (84- to 504-fold CPb2+ variation). This dependency, however, was less pronounced for Zn (12- to 74-fold CZn2+ variation) and least for Cd (2- to 14-fold CCd2+ variation). The WHAM performance was affected by source variation through the active DOM fraction (F). The commonly used F = 1.3 provided reliable CPb2+ for allochthonous DOMs and acceptable CCd2+ for all DOM, but significantly underpredicted CPb2+ and CZn2+ for autochthonous DOM. Adjusting F improved CM2+ predictions, but the optimum F values were metal-specific (e.g., 0.03 - 1.9 for Pb), as showed by linear correlations with specific optical indexes. The results indicate a potential to improve WHAM by incorporating rapid measurement of DOM optical properties for site-specific F., This work was financially supported by the Canada Research Chairs program (C.G.), and the Natural Sciences and Engineering Research Council of Canada (C.G. and D.S.S.). The authors also thank Dr. Chad Cuss for the help with data analysis. J.G., J.P., and E.C. gratefully acknowledge support for this research from the Spanish Ministry of Economy, Industry and Competitiveness MINECO (project nos. CTM2013-48967 and CTM2016-78798). The three anonymous reviewers are also acknowledged for their constructive comments that helped improve the manuscript.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Accumulation of Mg to Diffusive Gradients in Thin Films (DGT) devices: Kinetic and thermodynamic effects of the ionic strength

  • Altier Infantes, Alexandra
  • Jiménez-Piedrahita, Martín
  • Rey-Castro, Carlos
  • Cecilia Averós, Joan
  • Galceran i Nogués, Josep
  • Puy Llorens, Jaume
Availability of magnesium is a matter of concern due to its role in many environmental and biological processes. Diffusive Gradients in Thin Films (DGT) devices can measure Mg availability in situ. This work shows that Mg accumulation in water largely increases when ionic strength (I) decreases. This phenomenon can be explained from (i) the increase of both the association equilibrium (K) and rate (ka,R) constants for the reaction between Mg cations and resin sites, and (ii) the growing contribution of the partitioning of Mg cations at the resin–gel interface, as I decreases. Two theoretical models that take into account electrical interactions among Mg cations, background electrolyte, and resin sites can successfully be used to determine ka,R and K at each I. Both models yield similar ka,R values, which fulfill an expression for the kinetic salt effect. For freshwater (with a typical salinity of 10 mM and circumneutral pH), the binding of Mg is so fast and strong that the simplest perfect-sink DGT expression can be helpful to predict (overestimation lower than 5%) the accumulation in solutions with Mg concentrations up to 1 mM whenever the deployment time is below 9 h. Perfect sink conditions can still be applied for longer times, in systems with either a lower I or a lower Mg concentration., Financial support from FEDER and the Spanish Ministry of Education and Science (Projects CTM2012-39183 and CTM2013-48967) is gratefully acknowledged.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Dynamics of trace metal sorption by an ion-exchange chelating resin described by a mixed intraparticle/film diffusion transport model. The Cd/Chelex case

  • Quattrini, Federico
  • Galceran i Nogués, Josep
  • David, Calin
  • Puy Llorens, Jaume
  • Alberti, Giancarla
  • Rey-Castro, Carlos
The time-evolution of Cd2+ ion sorption by Chelex 100 resin was studied in batch experiments as a function of time, pH, ionic strength, stirring rate, mass of resin and initial metal ion concentration. In the experimental conditions, the amount of resin sites are in excess with respect to the amount of metal ion, leading to extensive depletion of metal in bulk solution when equilibrium is reached. The data were described using a mixed control mass transport model in finite volume conditions (MCM) that includes explicitly both intraparticle and film diffusion steps. Exact numerical computations and a new approximate analytical expression of this model are reported here. MCM successfully predicts the influence of pH and ionic strength on the experimental Cd(II)/Chelex kinetic profiles (which cannot be justified by a pure film diffusion controlled mechanism) with a minimum number of fitting parameters. The overall diffusion coefficient inside the resin was modelled in terms of the Donnan factor and the resin/cation binding stability constant. The values of the latter coefficient as a function of pH and ionic strength were estimated from the Gibbs-Donnan model. Even though MCM is numerically more involved than models exclusively restricted to film or intraparticle diffusion control, it proves to be accurate in a wider range of values of the mass transfer Biot number and solution/resin metal ratios., The authors gratefully acknowledge support for this research from the Spanish Ministry MINECO (Projects CTM2013-48967 and CTM2016-78798) and by the “Comissionat d'Universitats i Recerca de la Generalitat de Catalunya” (2014SGR1132). FQ acknowledges a grant from AGAUR.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Free indium concentration determined with AGNES

  • Tehrani, Marjan H.
  • Companys Ferran, Encarnació
  • Dago Busquets, Àngela
  • Puy Llorens, Jaume
  • Galceran i Nogués, Josep
Indium is increasingly used in electronic devices, from which it can be mobilized towards environmental compartments. Speciation of In in waters is important for its direct ecotoxicological effects, as well as for the fate of this element in the environment (e.g. fluxes from or towards sediments). Free indium concentrations in the environment can be extremely low due to hydrolysis, especially important in trivalent cations, to precipitation and to complexation with different ligands. In this work, the free indium concentration (which is a toxicologically and geochemically relevant fraction) in aqueous solutions at pH 3 has been measured with an adapted version of the electroanalytical technique AGNES (Absence of Gradients and Nernstian Equilibrium Stripping). Speciation measurements in mixtures of indium with the ligands NTA (nitrilotriacetic acid) and oxalate indicate that the values of their stability constants in the NIST46.6 database are less adequate than those published in some more recent literature. The extraordinary lability and mobility of In-oxalate complexes allow the measuring of free indium concentrations below nanomol/liter in just 25 s of deposition time., The authors gratefully acknowledge support for this research from the Spanish Ministry MINECO (Projects CTM2013-48967 and CTM2016-78798). MHT acknowledges the Generalitat of Catalonia for a Ph.D. grant (FI AGAUR).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Determination of the free metal Ion concentration using AGNES Implemented with environmentally friendly bismuth film electrodes

  • Rocha, Luciana S.
  • Galceran i Nogués, Josep
  • Puy Llorens, Jaume
  • Pinheiro, Jose Paulo
Ex-situ plated Bi film electrodes (Bi-FE) have been employed, for the first time, to measure the free concentration of Pb(II) in aqueous solutions using AGNES (Absence of Gradients and Nernstian Equilibrium Stripping) with Stripping Chronopotentiometry (SCP) quantification. The amount of deposited Pbº, below a certain threshold, follows a Nernstian relationship with the applied potential. This threshold can be interpreted as the frontier of transition from surface deposition to solid (bulk) formation of Pbº. AGNES with Bi-FE yielded a very good detection limit (3σ) for Pb(II) of 6.0×10-9 M with an applied gain of 398 and a deposition time of 400 s. The ability of the Bi film electrode to perform speciation measurements was demonstrated for Pb(II)-PSS and Pb(II)-IDA systems. The measured values with the Bi-FE were in good agreement with the values obtained using the Hg film electrode and/or the values reported in the literature., The authors thank Nuno G. Alves, Ana M. Rosa da Costa, and José A. Moreira for the synthesis of polystyrenesulfonate polymer. This work is supported by Portuguese funding through Fundação para a Ciência e a Tecnologia (Grant FCTANR/AAG-MAA/0065/2012), Faculdade de Ciências e Tecnologia (Grants Pest-OE/EQB/LA0023/2013 and PEst- OE/QUI/UI4023/2014), and by the Spanish Ministry of Science (Projects CTM2012-39183 and CTM2013-48967). L.S. Rocha also thanks FCT Project FCTANR/AAG-MAA/ 0065/2012 for her grant.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Free Zn2+ determination in natural freshwater of the Pyrenees: towards on-site measurements with AGNES

  • Parat, C.
  • Authier, L.
  • Castetbon,A.
  • Aguilar, David
  • Companys Ferran, Encarnació
  • Puy Llorens, Jaume
  • Galceran i Nogués, Josep
  • Potin-Gautier, M.
An on-site methodology has been developed for the direct determination of free Zn2+ with AGNES (Absence of Gradients and Nernstian Equilibrium Stripping) in freshwaters. This implementation includes: i) the use of screen printed electrodes, which provide good limits of detection and easy transportation and deployment; ii) no need for sample purging; iii) a calibration in a synthetic river solution that reproduces well the speciation changes of the natural samples and allows the oxygen interferences to be minimised; iv) the addition of a background electrolyte up to 0.01 mol L-1 in both the calibration and freshwater samples; v) chemical stripping chronopotentiometry as the quantification stage of AGNES. This procedure minimizes the effects of working at low ionic strength and in the presence of dissolved oxygen. In the laboratory, the methodology was checked with different natural samples taken from rivers Garonne, Gave de Cauterets and Gave de Pau in the Pyrenees. Results appeared in good agreement with theoretical estimations computed from Visual Minteq. On-site measurements were performed for the first time with AGNES in the Gave de Cauterets in Soulom (France) and the results were corroborated with purged measurements performed in the laboratory., English language editing by Holly Pearson is acknowledged. The authors acknowledge support for this research from the Communaut e d’Agglom eration de Pau Pyr en ees (CDAPP), from the Spanish Ministerio de Ciencia e Innovacio´n (project numbers CTM2012–39183 and CTM2013– 48967), from the European Community EFA15/08 (PyrMet) and from the Comissionat d’Universitats i Recerca de la Generalitat de Catalunya (project number 2014SGR1132).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Comparison of different speciation techniques to measure Zn availability in hydroponic media

  • Companys Ferran, Encarnació
  • Galceran i Nogués, Josep
  • Puy Llorens, Jaume
  • Sedó, Maria
  • Vera, Ruben
  • Anticó, Enriqueta
  • Fontàs, Claudia
Four analytical techniques are compared: AGNES (Absence of Gradients and Nernstian Equilibrium Stripping), LASV (Anodic Stripping Voltammetry with Linear stripping), DGT (Diffusive Gradients in Thin films) and PIM (Polymer Inclusion Membranes). These techniques have been designed to provide the free ion concentration or a labile fraction, complementarily contributing to an integrated description of speciation and availability. Their simultaneous application to the determination of free Zn concentrations or labile fluxes in seven solutions of a hydroponic medium reveals characteristics of each technique and correlations between their results. All dynamic results can be interpreted in terms of a general theoretical framework on fluxes. Indeed, in techniques under diffusion-limited conditions in the sample, the flux can be split into the free contribution (linearly proportional to the free fraction), plus the contribution of the complexes (where mobility, lability and abundance of complexation are intertwined). A methodology to compute lability degrees is developed. Measurements with PIM devices confirm that diffusion in the sample solution is not rate limiting, so its flux is proportional to the free metal in the donor solution. A proportionality between the responses of any given two techniques is observed, which suggests that, for the low ligand-to-metal concentration ratios used in the present work, any of these techniques would correlate similarly with uptake, toxic or nutritional measurements., This work was financially supported by the Spanish Ministry of Education and Science (projects CTM2013-48967 and CTM2016-78798). Alexandra Altier's help with DGT experiments is acknowledged.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

AGNES at vibrated gold microwire electrode for the direct quantification of free copper concentrations

  • Domingos, Rute F.
  • Carreira, Sara
  • Galceran i Nogués, Josep
  • Salaün, Pascal
  • Pinheiro, Jose Paulo
The free metal ion concentration and the dynamic features of the metal species are recognized as key to predict metal bioavailability and toxicity to aquatic organisms. Quantification of the former is, however, still challenging. In this paper, it is shown for the first time that the concentration of free copper (Cu2+) can be quantified by applying AGNES (Absence of Gradients and Nernstian equilibrium stripping) at a solid gold electrode. It was found that: i) the amount of deposited Cu follows a Nernstian relationship with the applied deposition potential, and ii) the stripping signal is linearly related with the free metal ion concentration. The performance of AGNES at the vibrating gold microwire electrode (VGME) was assessed for two labile systems: Cu-malonic acid and Cu-iminodiacetic acid at ionic strength 0.01 M and a range of pH values from 4.0 to 6.0. The free Cu concentrations and conditional stability constants obtained by AGNES were in good agreement with stripping scanned voltammetry and thermodynamic theoretical predictions obtained by Visual MinteQ. This work highlights the suitability of gold electrodes for the quantification of free metal ion concentrations by AGNES. It also strongly suggests that other solid electrodes may be well appropriate for such task. This new application of AGNES is a first step towards a range of applications for a number of metals in speciation, toxicological and environmental studies for the direct determination of the key parameter that is the free metal ion concentration., Funding for this work was provided by (i) Fundação para a Ciência e Tecnologia (FCT, Portugal): Science 2008 IST-CQE3 “Environmental Chemistry” Assistant Researcher position to RFD and Project PTDC/AAC-AMB/110595/2009, and (ii) ANR (Agence national de recherché) - FCT project N°12-IS06-0001 - SPECIES: “Mesure in situ de la spéciation des métaux trace”, by ANR Project NormaRHIZO. JG acknowledges financial support from the Spanish Ministry of Education and Science (project CTM2013-48967).