Skip to main content

PRIORIZACION DE COMPUESTOS CITOSTATICOS PARA MONITORIZACION AMBIENTAL. FUENTES, COMPORTAMIENTO Y ESTRATEGIAS DE REMEDIACION

CTM2014-60199-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Design and characterization of macroporous alumina membranes for passive samplers of water contaminants

  • Orera, V. M.
  • Silva-Treviño, J.
  • Franquet-Griell, Helena
  • Lacorte Bruguera, Silvia
Macroporous ceramic membranes with hierarchical pore structure were developed and characterized for the time-integrated analysis of water contaminants. The alumina membranes were boosted to allow a suitable diffusion rate for envisaged applications. Sacrificial fugitives as cornstarch and graphite and partial sintering technique were utilized for the control of pore structure and morphology. The present study includes: (i) Development of ceramic membrane preparation methods based on wet forming techniques and partial sintering in order to control of membrane parameters such as porosity, tortuosity factor and thickness; (ii) Microstructural characterization of the ceramic membranes using two complementary techniques: Hg-porosimetry and SEM; (iii) the diffusion tests performed under laboratory conditions by an innovative, easy and accurate method based in the use of methylene blue (C16H18ClN3S) water solutions as test compound to study the characteristics of ceramic membranes. Using slip casting and partial sintering processing three different Al2O3 membrane configurations with high values 34.5, 36.9 and 39.6 vol% of interconnected porosity and 1.75, 1.7 and 1.3 mm thickness were prepared. The pore morphology consisted of spherical cavities of 5-10 μm diameter and small pores of 70–200 nm. This study also gathers the basis for the calculation of diffusion coefficients, membrane geometrical factor and sampling rates using methylene blue water solutions whose concentration can be accurately determined by optical absorption measurements at 664 nm. Diffusion coefficients for methylene blue range from 2.3 ± 0.5E-8 to 3.0 ± 0.5E-8 cm2 s−1 increasing as connected porosity increases and membrane thickness decreases. The membrane geometrical factors are low, between 0.6 and 1E-02 and Archie’s constants large 4.5–5.5. This has been associated to the bimodal pore structure with coexistence of large and small pores that may increase the tortuosity factors in membranes. The macroporous ceramic membranes herein developed are suitable for the fabrication of passive samplers aimed at preconcentrating organic contaminants in water., Financial support from the Spanish Ministerio de Economía y Competitividad under the projects CTM2014-60199-P regarding the monitoring of cytostatic compounds and MAT2015-68078-R for the development of the ceramic membranes is acknowledged. HF acknowledges FPI grant BES-2012-053000., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Development of a macroporous ceramic passive sampler for the monitoring of cytostatic drugs in water

  • Franquet-Griell, Helena
  • Pueyo, Víctor
  • Silva-Treviño, J.
  • Orera, V. M.
  • Lacorte Bruguera, Silvia
The aim of this study was to develop and calibrate a macroporous ceramic passive sampler (MCPS) for the monitoring of anticancer drugs in wastewater. This system was designed by the Spanish Research Council (CSIC) and consists in a porous ceramic tube to allow a high diffusion of contaminants. The MCPS has been calibrated for 16 cytostatic drugs over time periods up to 9 d in spiked water under controlled laboratory conditions. Optimal uptake was accomplished for 7 compounds, namely ifosfamide, cyclophosphamide, capecitabine, prednisone, megestrol, cyproterone and mycophenolic acid, whereas cytarabine was not adsorbed in the receiving phase and the rest were hydrolyzed over the deployment period. The sampling rate for these 7 compounds was between 0.825 and 3.350 mL day-1 and the diffusion coefficients varied from 1.01E-07 to 4.12E-07 cm2 s-1. To prove the applicability of the MCPSs, samplers (n = 3) were deployed in influent and effluent waters of a WWTP for a period of 6 d and results were compared to grab sampling and extraction with Solid Phase Extraction (SPE). In influent waters, MCPS were clogged due to the high amount of suspended solids in these waters. In effluents, MCPS detected cyclophosphamide and mycophenolic acid at concentrations of 19 ± 3 and 136 ± 28 ng L-1 with a good agreement with the levels obtained by grab sampling. The study discusses the use and performance of the MCPS for the monitoring of stable cytostatic compounds in a complex matrix such as wastewater., This study has been performed thanks to financial support from the Ministerio de Economía y Competitividad of Spain under the projects CTM2014-60199-P and MAT2015-68078-R. H. Franquet acknowledges the FPI grant BES-2012-053000., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Design and characterization of macroporous alumina membranes for passive samplers of water contaminants

  • Orera, V.M.
  • Silva, J.
  • Franquet-Griell, H.
  • Lacorte, S.
Macroporous ceramic membranes with hierarchical pore structure were developed and characterized for the time-integrated analysis of water contaminants. The alumina membranes were boosted to allow a suitable diffusion rate for envisaged applications. Sacrificial fugitives as cornstarch and graphite and partial sintering technique were utilized for the control of pore structure and morphology. The present study includes: (i) Development of ceramic membrane preparation methods based on wet forming techniques and partial sintering in order to control of membrane parameters such as porosity, tortuosity factor and thickness; (ii) Microstructural characterization of the ceramic membranes using two complementary techniques: Hg-porosimetry and SEM; (iii) the diffusion tests performed under laboratory conditions by an innovative, easy and accurate method based in the use of methylene blue (C16H18ClN3S) water solutions as test compound to study the characteristics of ceramic membranes. Using slip casting and partial sintering processing three different Al2O3 membrane configurations with high values 34.5, 36.9 and 39.6 vol% of interconnected porosity and 1.75, 1.7 and 1.3 mm thickness were prepared. The pore morphology consisted of spherical cavities of 5-10 µm diameter and small pores of 70–200 nm. This study also gathers the basis for the calculation of diffusion coefficients, membrane geometrical factor and sampling rates using methylene blue water solutions whose concentration can be accurately determined by optical absorption measurements at 664 nm. Diffusion coefficients for methylene blue range from 2.3 ± 0.5E-8 to 3.0 ± 0.5E-8 cm2 s-1 increasing as connected porosity increases and membrane thickness decreases. The membrane geometrical factors are low, between 0.6 and 1E-02 and Archie''s constants large 4.5–5.5. This has been associated to the bimodal pore structure with coexistence of large and small pores that may increase the tortuosity factors in membranes. The macroporous ceramic membranes herein developed are suitable for the fabrication of passive samplers aimed at preconcentrating organic contaminants in water.