Skip to main content

ESTUDIO DE LA CORROSION TERMOGALVANICA EN LAS MAQUINAS DE ABSORCION DE LIBR DE DOBLE EFECTO MEDIANTE TECNICAS ELECTROQUIMICAS Y DE IMAGEN.

CTQ2009-07518

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2009
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effects of the area of a duplex stainless steel exposed to corrosion on the cathodic and anodic reactions in a LiBr solution under static and dynamic conditions

  • García-García, D.M.|||0000-0001-8951-4558
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] The objective of the work was to study the influence of the exposed area of the working electrode on the corrosion behavior of a duplex stainless steel (EN 1.4462) in a 992 g/l LiBr solution under static conditions (without cavitation) and dynamic conditions (with cavitation) at 25 °C. The Potentiodynamic Cyclic curves obtained were compared and different tendencies were observed. Cavitation increased the cathodic current density when the area exposed to the solution is large (diameters 6 and 8 mm). This behavior was not observed in the tests with smaller electrode areas (diameters 1.6 and 4 mm). © 2011 by ESG., We wish to express our gratitude to Ministerio de Ciencia e Innovación (CTQ2009-07518/PPQ), to FEDER for their financial support and to Dr. M. Asunción Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermogalvanic corrosion and galvanic effects of copper and AISI 316L stainless steel pairs in heavy LiBr brines under hydrodynamic conditions

  • Sánchez Tovar, Rita
  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Garcia-Anton, Jose|||0000-0002-0289-1324
Thermogalvanic corrosion of the copper/copper and AISI 316L/AISI 316L stainless steel pairs was studied in heavy lithium bromide brines under hydrodynamic conditions. The galvanic coupling effect between copper and stainless steel was also analysed. The cold electrode (25 °C) was the stainless steel for the galvanic pair, whereas copper temperature varied (25, 50 and 75 °C). A hydrodynamic circuit was designed to study thermogalvanic corrosion by means of the zero resistance ammeter technique. Hot cathodes take place in stainless steel pairs while cold cathodes are present in copper/copper and stainless steel/copper pairs; this agrees with the thermal temperature coefficient of the potential sign. Thermogalvanic corrosion increases corrosion rates, especially working with copper. Weight loss measurements show that there is a combined effect due to the thermogalvanic and the galvanic effects, The authors would like to express their gratitude to the MICINN (CTQ2009-07518), to the FPU Grant given to Rita Sanchez Tovar, to FEDER, to the Generalitat Valenciana for its help in the LSCM acquisition (MY08/ISIRM/S/100), to the Programa de Apoyo a la Investigacion y Desarrollo de la UPV (PAID-06-11-1864) and to Dr. Asuncion Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of temperature and Reynolds number on the galvanic corrosion of the copper/AISI 304 stainless steel pair in lithium bromide using a zero-resistance ammeter

  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Sánchez Tovar, Rita
[EN] The effects of temperature and Reynolds number (Re) on the galvanic corrosion of the copper (UNS C15710)/AISI 304 (UNS S30400) stainless steel pair in a concentrated lithium bromide (LiBr) solution was investigated in a hydraulic circuit using a zero-resistance ammeter. Results show that copper is the anode and that galvanic current density decreases with time because of the formation of a protective film. Initially, galvanic current density increases with Re; however, with time, differences decrease and this tendency is even reversed. As Re increases, greater quantities of corrosion products are initially produced and a thicker film is formed. The galvanic current density increases with temperature, suggesting that the films formed at lower temperatures are less defective and more resistant; however, at the highest flow rate, with time, the galvanic current density is lower at 75°C than at 50°C. This behavior is attributed to the quick and large formation of corrosion products at the highest flow and temperature. Statistical analysis proved that the effect of temperature on galvanic current density is more influential than the Re effect, and the variation induced by time is only significant during the first hours., The authors would like to express their gratitude to the MICINN for the financial support (project CTQ2009-07518), to the FPU grant given to R. Sanchez Tovar, to FEDER (Fondo Europeo de Desarrollo Regional), and to A. Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

In-Situ Study of Single and Double Loop Reactivation Methods During the Characterisation of the Degree of Sensitisation of a Duplex Stainless Steel (UNS 1.4462) Using a Minicell and a Confocal Microscope

  • Leiva García, Rafael
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] The aim of this work is to study the evolution of the electrode surface during the single and double reactivation methods at microscopic scale. The tested material has been a duplex stainless steel (UNS 1.4462) in its as-received state and heated at 825 degrees C for 1 hour in an inert atmosphere. Tests have been carried out in an electrochemical minicell that can be put in the stage of a confocal microscope. These devices allow the in-situ observation of the electrode surface at microscopic scale during the tests. Differences in the evolution of the electrode surface have been observed between the single and the double loop methods. Furthermore, the sensitised sample shows different evolution during the electrochemical tests than the as-received sample. These differences are due to the formation of new phases during the heat treatment. Therefore, the minicell permits obtaining additional information during the electrochemical characterisation of the degree of sensitisation in duplex stainless steels., We wish to express our gratitude to MICINN (CTQ2009-07518), to FEDER, to the Generalitat Valenciana for its help in the CLSM acquisition (MY08/ISIRM/S/100), and to Dr. Asunción Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Contribution of the flowing conditions to the galvanic corrosion of the copper/AISI 316L coupling in highly concentrated LiBr solutions

  • Sánchez Tovar, Rita
  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Garcia-Anton, Jose|||0000-0002-0289-1324
The galvanic corrosion of copper/AISI 316L stainless steel couples has been studied under different temperatures and flowing conditions in heavy LiBr brines. The mixed potential theory, zero-resistance ammeter and weight loss measurements were performed. Temperature and Reynolds number increase galvanic corrosion rates of copper. Statistical analysis by means of multilevel factorial design reveals that temperature greatly affects galvanic current densities. Additionally, the mixed potential theory suggests that thermogalvanic corrosion may occur when the materials of the pair work at different temperatures. The most important increase of current densities due to thermogalvanic effects takes place at high Reynolds numbers with the highest difference of temperature between copper/AISI 316L pairs and the anode operating at 25 °C. The results obtained with the different techniques are in good agreement., The authors would like to express their gratitude to the FPU grant given to Rita Sanchez Tovar, MICINN (CTQ2009-07518), to FEDER, to the Programa de Apoyo a la Investigacion y Desarrollo de la UPV (PAID-06-11-1864), to the Generalitat Valenciana for its help in the LSCM acquisition (MY08/ISIRM/S/100) and to Dr. Asuncion Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermogalvanic corrosion of Alloy 31 in different heavy brine LiBr solutions

  • Fernández Domene, Ramón Manuel
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • García-García, D.M.|||0000-0001-8951-4558
  • Garcia-Anton, Jose|||0000-0002-0289-1324
Thermogalvanic corrosion generated between two electrodes of Alloy 31, a highly-alloyed austenitic stainless steel (UNS N08031), has been investigated imposing different temperature gradients in three deaerated LiBr solutions, under open circuit conditions by using a zero-resistance ammeter (ZRA). Besides EIS spectra were acquired in order to explain the obtained results. On the whole, cold Alloy 31 electrodes were anodic to hot Alloy 31 electrodes, since an increase in temperature favoured the cathodic behaviour of the hot electrode. Thermogalvanic corrosion of Alloy 31 in the LiBr solutions studied was not severe, although it negatively affects the corrosion resistance of the cold anode. The protective properties of the passive film formed on the anode surface were found to improve with thermogalvanic coupling time, We wish express our gratitude to the Ministerio de Ciencia e Innovacion (Project CTQ2009-07518), for the economical support of this research, to Thyssen Krupp for supplying the materials, and to Dr. M. Asuncion Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The effect of temperature on the galvanic corrosion of the copper/AISI 304 pair in LiBr solutions under hydrodynamic conditions

  • Sánchez Tovar, Rita
  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] The corrosion behaviour of copper and AISI 304 stainless steel and the galvanic corrosion generated by the copper/AISI 304 pair, have been studied by electrochemical methods. These materials have been tested in an 850 g/L LiBr solution at different temperatures (25-75 degrees C) and at different Reynolds numbers (1456-5066) in order to study their performance in absorption machines. Results show that copper was always the anodic element of the pair and its corrosion resistance decreases due to the AISI 304 stainless steel galvanic effect. Galvanic corrosion increases with temperature and Reynolds number. However, it was proved that the effect of temperature on galvanic corrosion is more influential than the Reynolds number effect. This fact is also certain for corrosion of uncoupled copper and for corrosion of AISI 304 stainless steel. Experimental values of the corrosion current densities fit well the Arrhenius plot at all the Reynolds numbers analysed and a potential relation between the corrosion current densities and the Reynolds number has been found. (C) 2009 Elsevier Ltd. All rights reserved., This work was supported by the MICINN (reference number: CTQ2009-07518) and FEDER (Fondo Europeo de Desarrollo Regional). The authors also wish to express their gratitude to Asuncion Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of different micro-plasma arc welding (MPAW) processes on the corrosion of AISI 316L SS tubes in LiBr and H3PO4 solutions under flowing conditions

  • Sánchez Tovar, Rita
  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] This work studies the corrosion under flowing conditions of four kinds of AISI 316L materials welded by the micro-plasma arc welding technique in different media: a basic (LiBr) and an acidic (H3PO4) solution by means of polarization measurements. Sensitization tests, galvanic corrosion evaluation, microstructural analyses and microhardness tests have been also carried out. Corrosion parameters revealed that, among the materials welded with backing gas, the alloy which presented better corrosion behaviour was the one welded without filler alloy. However, this kind of material could undergo several corrosion problems if a crack is formed or due to an inadequate joint penetration. (C) 2009 Elsevier Ltd. All rights reserved., The authors would like to express their gratitude to the MICINN (CTQ2009-07518), to FEDER, to the MAE (PCI Mediterraneo C/018046/08) and to Asuncion Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of pH on the electrochemical behaviour of a duplex stainless steel in highly concentrated LiBr solutions

  • Guiñón Pina, Virginia
  • Igual Muñoz, Anna Neus
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] The objective is to study the influence of pH on the corrosion and passive behaviour of duplex stainless steels (DSS) using potentiodynamic measurements, potentiostatic tests and electrochemical impedance spectroscopy (EIS). DSS are spontaneously passive in heavy brine LiBr solutions. Under potentiostatic conditions at applied anodic potentials within the passive domain an equivalent circuit with two time constants is the most suitable model to describe the corrosion mechanism in the interface electrolyte/passive film/metal. pH modifies the electrochemical properties of the passivity of the alloy in a 992. g/L LiBr solution reducing its resistance with the applied potential, We wish to express our gratitude to MCYT (CTQ2009-07518), to Feder and to Dr. M. Asunción Jaime for her translation assistance
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermogalvanic effects on the corrosion of copper in heavy brine LiBr solutions

  • Fernández Domene, Ramón Manuel
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • García-García, D.M.|||0000-0001-8951-4558
  • Garcia-Anton, Jose|||0000-0002-0289-1324
Thermogalvanic corrosion of copper in heavy brine LiBr solutions has been investigated using a zero-resistance ammeter (ZRA). The temperature gradients between copper electrodes immersed in the same LiBr solution result in the formation of thermogalvanic cells with hot anodes, leading to high and sustained thermogalvanic currents. Copper loss rates, calculated using Faraday's law, substantially exceed 0.025mmyear -1, a value regarded as the threshold of low corrosion rates. The effects of thermogalvanic coupling on the surface properties of the anode and the cathode have been analysed by means of electrochemical impedance spectroscopy (EIS). The results obtained in this analysis have been related to the process of copper electrodissolution in bromide media., We wish express our gratitude to the Ministerio de Ciencia e Innovacion (Project CTQ2009-07518), for the economical support of this research and to Dr. M. Asuncion Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of temperature on the passive state of Alloy 31 in a LiBr solution: Passivation and Mott-Schottky analysis

  • Fernández Domene, Ramón Manuel
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • García-García, D.M.|||0000-0001-8951-4558
  • Garcia-Anton, Jose|||0000-0002-0289-1324
The passive behaviour of Alloy 31, a highly-alloyed austenitic stainless steel (UNS N08031), has been investigated in a LiBr heavy brine (700 g/l) at different temperatures using potentiostatic polarisation and Mott-Schottky analysis. Cation vacancies have been found to be the dominant defect in the passive films formed on Alloy 31. An increase in temperature enhanced the generation of cation vacancies at the film/solution interface and raised the steady-state passive current density. The density of defects within the passive film also increased significantly with temperature, making the film more conductive and less protective against localised attacks., We wish express our gratitude to the Ministerio de Ciencia e Innovacion (Project CTQ2009-07518), for the economical support of this research, to Thyssen Krupp for supplying the materials, and to Dr. M. Asuncion Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of the micro-plasma arc welding technique on the microstructure and pitting corrosion of AISI 316L stainless steels in heavy LiBr brines

  • Sánchez Tovar, Rita
  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Garcia-Anton, Jose|||0000-0002-0289-1324
The effects of the micro-plasma arc welding technique on the microstructure and pitting corrosion of different zones of an AISI 316L stainless steel were studied using different microscopy and electrochemical techniques. Galvanodynamic measurements and laser scanning confocal microscope were used to evaluate the corrosion evolution in situ. Results show, in general, the worst corrosion behaviour for the heat affected zone. Furthermore, there is a relation between the effects of the micro-plasma arc welding process on the materials microstructure and their pitting corrosion resistance. The weld zone was always in the cathodic position of the possible galvanic pairs., The authors would like to express their gratitude to the MICINN for the financial support (project CTQ2009-07518), to the FPU grant given to Rita Sanchez Tovar, to FEDER, to the Generalitat Valenciana for its help in the LSCM acquisition (MY08/ISIRM/S/100) and to Dr. Asuncion Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of thermal oxide films formed on a duplex stainless steel by means of confocal-Raman microscopy and electrochemical techniques

  • Sánchez Tovar, Rita
  • Leiva García, Rafael
  • Garcia-Anton, Jose|||0000-0002-0289-1324
In this work oxide films have been developed on the surface of a duplex stainless steel (UNS 1.4462) using high temperature confocal microscopy to follow their growth. The characteristics of these oxide films have been analyzed by means of weight-gain measurements, Raman microscopy and electrochemical techniques, namely potentiodynamic polarization curves and electrochemical impedance spectroscopy. The results show an increase in the amount of oxides (particularly γ-Fe2O3 and Fe3O4) with temperature. Regarding the electrochemical properties of these films, the corrosion resistance of the film tends to be lower with the heat treatment temperature, probably due to a more porous and heterogeneous scale. Mott–Schottky plots show the n-type semiconductive behavior of the films with donor densities that decrease with the enhancement of the temperature., We wish to express our gratitude to MICINN (CTQ2009-07518) (UPVO8-3E-012), to Universitat Politecnica de Valencia (CEI-01-11), to the Generalitat Valenciana for its help in the CLSM acquisition (MY08/ISIRM/S/100), and to Dr. Asuncion Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Pourbaix diagrams for titanium in concentrated aqueous lithium bromide solutions at 25 ºC

  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Guiñón Segura, José Luís
  • Leiva García, Rafael
Pourbaix diagrams (electrode potential-pH diagrams) for Ti–Br−–H2O system at 25 °C in the absence and presence of titanium hydrides were developed in 400, 700, 850, and 992 g/L LiBr solutions. The diagrams were compared with the simple Ti–H2O system at 25 °C. Comparison of the simple Ti–H2O system with the diagrams of the Ti–Br−–H2O system at 25 °C showed that the titanium solubility range in the acid, neutral, and weak alkaline areas of the diagrams extended slightly to both higher pH values and potentials with increasing bromide ion activity and decreasing water activity., The authors acknowledge the MICINN (Ministerio de Ciencia e Innovacion, Convention No. CTQ2009-07518) and FEDER (Fondo Europeo de Desarrollo Regional) for the support of this work, Dr. M. Asuncion Jaime for her translation assistance, and Antonio Juncos for his assistance in plotting the diagrams.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Cavitation corrosion and repassivation kinetics of titanium in a heavy brine LiBr solution evaluated by using electrochemical techniques and Confocal Laser Scanning Microscopy

  • Fernández Domene, Ramón Manuel
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • García-García, D.M.|||0000-0001-8951-4558
  • Garcia-Anton, Jose|||0000-0002-0289-1324
The cavitation corrosion behaviour of commercially pure Grade 2 titanium in a 992 g/l LiBr solution has been investigated at 25 °C using an ultrasound device. Cavitation was found to have more influence on the anodic branch than on the cathodic branch, shifting the corrosion potential, Ecorr, and the OCP value towards more negative potentials, and increasing the corrosion current density, icorr, by six times. The repassivation kinetics of Grade 2 titanium have also been studied in the 992 g/l LiBr solution, at 25 °C and various applied potentials, using cavitation to damage the electrode surface. The repassivation kinetics have been analysed in terms of the current density flowing from the area damaged by cavitation, and the results were described by the equation i(t) = A·t−n. At potentials within the passive region, the passive film grew according to the high-field ion conduction model in which log i(t) is linearly proportional to 1/q(t). The damage generated during the potentiostatic tests has been quantified by means of Confocal Laser Scanning Microscopy, We wish express our gratitude to the Ministerio de Ciencia e Innovacion (Project CTQ2009-07518), for the economical support of this research, to the Generalitat Valenciana for its help in the CLSM acquisition (MY08/ISIRYM/S/100), and to Dr. M. Asuncion Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effects of microplasma arc AISI 316L welds on the corrosion behaviour of pipelines in LiBr cooling systems

  • Sánchez-Tovar, R.
  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] The effect of microplasma arc welding (MPAW) on the electrochemical and corrosion behaviour of AISI 316L stainless steel tubes has been studied. Scanning electrochemical measurements were performed in sodium chloride to evaluate the difference in the electrochemical activity of base (non-welded) and welded samples. Oxygen reduction rates increase in AISI 316L due to the heat treatment effect induced by welding, indicating a higher electrochemical activity in the welded samples. Additionally, the use of MPA weldments in lithium bromide (LiBr) absorption machines was also analysed at typical operating temperatures and Reynolds numbers. The welding process increases corrosion rates, hinders passivation and increases the susceptibility to pitting attack in LiBr. However, zero-resistance ammeter and localization index measurements show that the galvanic pair generated between the base and welded alloys is weak, both electrodes being in their passive state. Temperature greatly affects the corrosion process. (C) 2013 Elsevier Ltd. All rights reserved., The authors would like to express their gratitude to the FPU grant given to Rita Sanchez Tovar, MICINN (CTQ2009-07518), to FEDER, to the Programa de Apoyo a la Investigacion y Desarrollo de la UPV (PAID-06-11-1864), to the Generalitat Valenciana for its help in the SECM acquisition (PPC/2011/013) and to Dr. Asuncion Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of the sensitisation process of a duplex stainless steel (UNS 1.4462) by means of confocal microscopy and localised electrochemical techniques

  • Leiva García, Rafael
  • Fernandes, Joao Salvador
  • Muñoz-Portero, María-José
  • Garcia-Anton, Jose|||0000-0002-0289-1324
When duplex stainless steels are heated, they can become sensitised and intermetallic phases can appear. In this work, samples of duplex stainless steel, UNS 1.4462, have been heated (850 degrees C for 1 and 2 h) in a heating unit that can be accommodated to a confocal microscope in order to study the morphological changes in-situ. The electrochemical behaviour of the samples has been analysed by means of conventional and localised electrochemical techniques. According to the results, there is a general decrease in the steel resistance to localised corrosion; this decrease can be related to defects in the formed passive film., We wish to express our gratitude to MICINN (CTQ2009-07518), to Universitat Politecnica de Valencia (CEI-01-11), to the Generalitat Valenciana for its help in the CLSM acquisition (MY08/ISIRM/S/100), to Professor Alda Simoes and Andreia Marques for the help on LEIS measurements and to Dr. Asuncion Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Passive and transpassive behaviour of Alloy 31 in a heavy brine LiBr solution

  • Fernández Domene, Ramón Manuel
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • García-García, D.M.|||0000-0001-8951-4558
  • Garcia-Anton, Jose|||0000-0002-0289-1324
The passive and transpassive behaviour of Alloy 31, a highly alloyed austenitic stainless steel (UNS N08031), has been investigated in a LiBr heavy brine solution (400 g/l) at 25 °C using potentiostatic polarisation combined with electrochemical impedance spectroscopy and Mott–Schottky analysis. The passive film formed on Alloy 31 has been found to be p-type and/or n-type in electronic character, depending on the film formation potential. The thickness of the film formed at potentials within the passive region increases linearly with applied potential. The film formed at transpassive potentials is thinner and more conductive than the film formed within the passive region. These observations are consistent with the predictions of the Point Defect Model for passive and transpassive films on metals and alloys, We wish express our gratitude to the Ministerio de Ciencia e Innovacion (project CTQ2009-07518), for the economical support of this research, to Thyssen Krupp for supplying the materials, and to Dr. M. Asuncion Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of alloying elements on the electronic properties of passive films formed on carbon steel, ferritic and austenitic stainless steels in a highly concentrated LiBr solution

  • Fernández Domene, Ramón Manuel
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • García-García, D.M.|||0000-0001-8951-4558
  • Garcia-Anton, Jose|||0000-0002-0289-1324
The influence of alloying elements on the electrochemical and semiconducting properties of thin passive films formed on several steels (carbon steel, ferritic and austenitic stainless steels) has been studied in a highly concentrated lithium bromide (LiBr) solution at 25 °C, by means of potentiodynamic tests and Mott Schottky analysis. The addition of Cr to carbon steel promoted the formation of a p-type semiconducting region in the passive film. A high Ni contentmodified the electronic behaviour of highly alloyed austenitic stainless steels.Mo did notmodify the electronic structure of the passive films, but reduced the concentration of defects., We wish express our gratitude to the Ministerio de Ciencia e Innovacion (Project CTQ2009-07518), for the economical support of this research, to Thyssen Krupp for supplying the materials, and to Dr. M. Asuncion Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Temperature on Thermogalvanic Coupling of Alloy 31 in Libr Solutions Studied by Means of Imposed Potential Measurements

  • Fernández Domene, Ramón Manuel
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • García-García, D.M.|||0000-0001-8951-4558
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] Corrosion resistance of Alloy 31, a highly alloyed stainless steel (UNS N08031) were studied in heavy brine LiBr solutions (400, 700 and 992 g/l) at different temperatures using electrochemical techniques. The mixed potential theory was used to evaluate thermogalvanic corrosion of Alloy 31 in the studied LiBr solutions. Potentiodynamic curves indicate that high temperatures favoured both cathodic and anodic processes, increasing passive current densities and decreasing the pitting potential. Generally, the cold electrode of the pair was the anode of the thermogalvanic cell., We wish express our gratitude to the Ministerio de Ciencia e Innovación (Project CTQ2009-07518), for the economical support of this research, to Thyssen Krupp for supplying the materials, and to Dr. M. Asunción Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of the sensitisation of a highly alloyed austenitic stainless steel, Alloy 926 (UNS N08926), by means of scanning electrochemical microscopy

  • Leiva García, Rafael
  • Akid, R.
  • Greenfield, D.
  • Gittens, J.
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Garcia-Anton, Jose|||0000-0002-0289-1324
The feedback mode of a scanning electrochemical microscope (SECM) was applied to study differences in the reactivity of a highly alloyed austenitic stainless steel, Alloy 926 (UNS N08926), in its unsensitised and sensitised state. Alloy 926 was heated at 825 °C for 1 h in an inert atmosphere in order to produce a sensitised metallurgical condition. Sensitisation was due to chromium carbide formation at the grain boundaries. The oxygen reduction reaction was used as an indicator to monitor the effect of the sensitisation process on the corrosion activity of the Alloy 926 surface in a 35 g l -1 NaCl solution. Higher oxygen consumption was observed above the sensitised sample than above the unsensitised sample due to differences in the oxide films of the two alloy conditions., We wish to express our gratitude to MICINN (CTQ2009-07518, BES2007-16321) for its financial support during the stay at Sheffield Hallam University, to Universitat Politecnica de Valencia (CEI-01-11), to Dr. Oliver Lewis from Sheffield Hallam University, and to Dr. Helena Alves from Krupp VDM for supplying the materials.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Imposed potential measurement to evaluate the pitting corrosion resistance and the galvanic behaviour of a highly alloyed austenitic stainless steel and its weldment in a LiBr solution at temperatures up to 150ºC

  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • García-García, D.M.|||0000-0001-8951-4558
  • Garcia-Anton, Jose|||0000-0002-0289-1324
Pitting corrosion resistance and galvanic behaviour of Alloy 31, a highly alloyed austenitic stainless steel (UNS N08031), and its weldment were studied in a heavy brine LiBr solution 1080 g/l at different temperatures (75–150 °C) using electrochemical techniques. The Mixed Potential Theory was used to evaluate the galvanic corrosion between the base and welded metals. Cyclic potentiodynamic curves indicate that high temperatures make passivation and repassivation of pits difficult, because the whole passivation range and the repassivation potential values decrease with temperature. The critical pitting transition occurs between 100 and 125 °C, We wish to express our gratitude to Ministerio de Ciencia e Innovacion (CTQ2009-07518/PPQ) for its financial support, to Dr. Helena Elves from Krupp VDM for supplying the materials and to Dr. M. Asuncion Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Passivity Breakdown of Titanium in LiBr solutions

  • Fernández Domene, Ramón Manuel
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • García-García, D.M.|||0000-0001-8951-4558
  • Garcia-Anton, Jose|||0000-0002-0289-1324
The passive behavior of titanium and its susceptibility to undergo localized attack in different LiBr solutions at 25 degrees C have been investigated using different electrochemical techniques: potentiodynamic polarization curves, potentiostatic passivation tests, EIS measurements and Mott-Schottky analysis. In low and moderately concentrated LiBr solutions, the breakdown potential E-b decreased with increasing bromide concentrations, while in highly concentrated LiBr solutions, E-b increased with increasing LiBr concentration. In the most concentrated LiBr solution (11.42M) Ti did not undergo passivity breakdown even at 9 V-Ag/AgCl. This observation can be explained by a a decrease in the activity of water in highly concentrated LiBr solutions. (C) 2013 The Electrochemical Society., We wish express our gratitude to the Ministerio de Ciencia e Innovacion (Project CTQ2009-07518), and to Dr. M. Asuncion Jaime. for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effects of flow variations on the galvanic corrosion of the copper/AISI 304 stainless steel pair in lithium bromide using a zero-resistance ammeter

  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Sánchez Tovar, Rita
[EN] The effects of flow variations on the galvanic corrosion of the copper/AISI 304 stainless steel pair in a concentrated lithium bromide solution were investigated in a hydraulic circuit applying different flow steps and using a zero-resistance ammeter (ZRA). The flow steps consist in applying a flow rate for sixty minutes after leaving the system under stagnant conditions for another sixty minutes; this procedure is repeated during eight hours. The magnitude of the steps is different depending on the flow regime studied, ranging from a Reynolds number of 633 to 5066. Results show that, when a flow step is applied, the galvanic current density increases and the galvanic potential shifts towards more negative values. However, with time, this increase in the galvanic current density is lower, reaching its lowest value in the last hour of the experiment at a Reynolds number of 5066. Thus, although the corrosion rate increases as Reynolds number increases, the protective corrosion products are generated earlier on the copper surface. © 2012 by ESG., The authors would like to express their gratitude to the MICINN for the financial support (project CTQ2009-07518), to the FPU grant given to Rita Sánchez Tovar, to FEDER (Fondo Europeo de Desarrollo Regional) and to Dr. Asunción Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of sensitisation on the corrosion behaviour of Alloy 926 (UNS N08926) in concentrated aqueous lithium bromide solutions at different temperatures

  • Leiva García, Rafael
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] The aim of this work is to study the influence of sensitisation to intergranular corrosion on a highly alloyed austenitic stainless steel, Alloy 926 (UNS N08926). Some specimens of this steel have been heated in an argon atmosphere at 825 degrees C during 1 hour. The degree of sensitisation has been characterised by means of SEM, etching (with oxalic acid), and electrochemical reactivation methods (single and double loop tests). The corrosion behaviour of sensitised and unsensitised Alloy 926 has been analysed in a concentrated aqueous lithium bromide (LiBr) solution of 992 g/L by means of cyclic potentiodynamic curves at different temperatures. The results indicate that chromium carbide precipitates reduce the pitting potential value of Alloy 926. Besides, the pitting potential decreases with temperature. On the other hand, the corrosion potential and open circuit potential values increase with temperature and sensitisation., We wish to express our gratitude to MICINN (CTQ2009-07518), to FEDER, to Dr. Helena Alves from Krupp VDM for supplying the materials, and to Dr. Asunción Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of the Flowing Conditions on the Galvanic Corrosion of the Copper/AISI 304 Pair in Lithium Bromide Using a Zero-Resistance Ammeter

  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Sánchez Tovar, Rita
[EN] In this work, the influence of Reynolds number (Re) on the galvanic corrosion of the copper/AISI 304 stainless steel pair in an 850 g/L lithium bromide solution was evaluated in a hydraulic circuit using a zero-resistance ammeter; this technique has the advantages that it can be used without disturbing the system under investigation and in continuous-time. Results show that copper is the anodic member of the pair for all the Re analyzed. The galvanic current density values are always greater under flowing than under stagnant conditions. A general tendency of galvanic current density to decrease with time is observed due to the formation of a film of corrosion products on copper surface. Under flowing conditions, initially, galvanic current density increases with Re; however, with time, this tendency is reversed. As Re increases, greater quantities of corrosion products are initially produced and, as a result, a thicker film is formed., This work was supported by the MICINN (reference number: CTQ2009-07518) and FEDER (Fondo Europeo de Desarrollo Regional). The authors also wish to express their gratitude to Asunción Jaime for her translation assistance.