Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Catalysis by metal nanoparticles embedded on metal-organic frameworks

  • Dhakshinamoorthy, Amarajothi
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The present review describes the use of metal-organic frameworks (MOFs) as porous matrices to embed metal nanoparticles (MNPs) and occasionally metal oxide clusters, which are subsequently used as heterogeneous catalysts. The review is organized according to the embedded metal including Pd, Au, Ru, Cu, Pt, Ni and Ag. Emphasis is also given in the various methodologies reported for the formation of the NPs and the characterization techniques. The reactions described with this type of solid catalysts include condensation, hydrogenations, carbon-carbon coupling, alcohol oxidations and methanol synthesis among others. Remaining issues in this field have also been indicated., Financial support from the Spanish DGI (CTQ 2009-11587, CTQ 2010-18671 and CONSOLIDER MULTICAT) is gratefully acknowledged. Funding of European Commission through an integrated FP7 project MACADEMIA (FP7/2007-2013 No. 228862) is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Atmospheric-pressure, liquid-phase, selective aerobic oxidation of alkanes catalysed by metal-organic frameworks

  • Dhakshinamoorthy, Amarajothi
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Aerobic oxidation of cyclooctane to its corresponding ol/one mixture at atmospheric pressure and in the liquid phase is efficiently promoted by an Fe(BTC) (BTC=1,3,5-benzenetricarboxylate) metal-organic framework, incorporating N-hydroxyphthalimide and in several cases reaches a selectivity over 90% at 28% conversion. This catalytic system is further extended to other hydrocarbons, such as ethylbenzene and 1,2,3,4-tetrahydronaphthalene (tetralin), with high selectivity (>85%). This high selectivity in the product distribution arises from a radical reaction mechanism that occurs inside a hydrophobic cavity that preferentially adsorbs hydrocarbons over their corresponding alcohols. The system can be reused although there is a gradual decrease in turnover frequency, caused by minor changes in the crystal structure due to the formation of iron oxide nanoparticles. Given the sustainable nature of the oxidant and the mild conditions used, this discovery could serve to develop a new catalyst generation for the oxyfunctionalisation of hydrocarbon feedstocks with the real possibility of finding industrial application., Financial support from the Spanish DGI (CTQ2009-11587, CTQ2007-67805 and Consolider MULTICAT) is gratefully acknowledged. Partial funding from the European Community's Seventh Framework Programme ([FP7/2007-2013] under grant agreement number 228862) is also gratefully acknowledged. Alejandro Vidal is thanked for recording the ESR spectra.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparison of Porous Iron Trimesates Basolite F300 and MIL-100(Fe) As Heterogeneous Catalysts for Lewis Acid and Oxidation Reactions: Roles of Structural Defects and Stability

  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Horcajada Campos, Patricia
  • Gibson, Emma
  • Vishnuvarthan, Muthusamy
  • Vimont, Alexandre
  • Grenèche, Jean-Marc
  • Serre, Christian
  • Daturi, Marco
[EN] Two porous iron trimesates, namely, commercial Basolite F300 (Fe(BTC); BTC = 1,3,5-benzenetricarboxylate) with unknown structure and synthetic MIL-100(Fe) (MIL stands for Material of Institut Lavoisier) of welldefined crystalline structure, have been compared as heterogeneous catalysts for four different reactions. It was found that while for catalytic processes requiring strong Lewis acid sites, Fe(BTC) performs better, MIL-100(Fe) is the preferred catalyst for oxidation reactions. These catalytic results have been rationalized by a combined in situ infrared and 57Fe Mo¿ssbauer spectroscopic characterization. It is proposed that the presence of extra Brønsted acid sites on the Fe(BTC) and the easier redox behavior of the MIL-100(Fe) could explain these comparative catalytic performances. The results illustrate the importance of structural defects (presence of weak Brønsted acid sites) and structural stability (MIL-100(Fe) is stable upon annealing at 280 °C despite Fe3+-to-Fe2+ reduction) on the catalytic activity of these two solids, depending on the reaction type., Financial support by the Spanish Ministry of Science and Innovation (CTQ2009-11587, CTQ2010-18671, and Consolider MULTICAT) is gratefully acknowledged. This work has been funded in part by MACADEMIA (www.macademia-project.eu), a 4-year Large-Scale Integrating Collaborative Project funded by the European Community's Seventh Framework Programme (FP7/2007-2013) under Grant agreement No. 228862 (Nanosciences, Nanotechnologies, Materials and New Production Technologies Theme). M.D and A.V. thank G. Le Bars for assistance with infrared measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Heterogeneous Fenton Catalysts Based on Activated Carbon and Related Materials

  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Dhakshinamoorthy, Amarajothi
[EN] The Fenton reaction is widely used for remediation of waste water and for the degradation of organic pollutants in water. Currently, there is considerable interest to convert the classical Fenton reaction, which consumes stoichiometric amounts of iron(II) salts, into a catalytic process that is promoted by a solid. This review describes the work that has used carbonaceous materials either directly as catalysts or, more frequently, as a large-area support for catalytically activated transition metals or metal-oxide nanoparticles. The interest in this type of catalyst derives from the wide use of carbon in conventional water treatments and the wide applicability of the Fenton reaction. After two general sections that illustrate the scope and background of Fenton chemistry, the review describes the activity of activated carbon in the absence or presence of metal-containing particles. The last sections of the review focus on different types of carbonaceous materials, such as carbon nanotubes and diamond nanoparticles. The review concludes with a section that anticipates future developments in this area, which are aimed at overcoming the current limitations of low activity and occurrence of metal leaching., Financial support by the Spanish DGI (CTQ-2009-11587 and Consolider MULTICAT) is gratefully acknowledged. S.N. thanks the Technical University of Valencia for a postgraduate research contract (Cantera Program).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of self-assembly of amphiphilic imidazolium ionic liquids on their host-guest complexes with cucurbit[n]urils

  • Buaki-Sogo, Mireia
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
Two symmetric amphiphilic imidazolium ionic liquids having omega-undecenyl chains form supramolecular complexes with CB[7] and CB[8] in water as revealed by H-1 NMR spectroscopy and MALDI-MS. Binding constants in the range 10(4) to 10(5) M-1 were estimated from the conductivity measurements for the 1:1 complexes of these imidazolium ionic liquids with CB[7] and CB[8]. Radical initiated polymerization of these host-guest complexes at concentrations above the critical self-assembly concentration of imidazolium ionic liquids to form liposomes, destroys completely (CB[7]) or partially (CB[8]) the host-guest ionic liquid@CB[n] complex; this behaviour was proved by titration with acridine orange tricyclic dye, of CB[n]s in the colloidal solutions of the liposomes before and after performing dialysis to remove free CB [n]s. Thus, the increase in the fluorescence emission of acridine orange by CB[7] is not observed if the polymerized ionic liquid@CB[7] complex is submitted to dialysis to remove uncomplexed CB[7]. Analogous study by titration of absorbance change of acridine orange solutions caused by CB[8], reveals only a partial destruction of the host-guest complex by self-assembly of amphiphilic ionic liquid above the critical self-assembly concentration. The results obtained have been rationalized considering that the driving force for the formation of supramolecular ionic liquid@CB[n] complexes is a hydrophobic interaction between the apolar alkenyl chain and the cucurbituril interior cavity and that these hydrophobic interactions are disturbed when self-assembly leading to liposomes occurs., Financial support by the Spanish Ministry of Science and Education (CTQ2009-11587 and CTQ2010-18671) is gratefully acknowledged. M.B.-S. thanks also the Spanish Ministry for a postgraduate scholarship (CTQ2007-67805)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Formation and Properties of a Hybrid Organosilica with a p-Phenylene Vinylene Polymer Partially Grafted to the Walls

  • Buaki-Sogo, Mireia
  • De Miguel de la Torre, Maykel
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
The present manuscript reports a mesoporous organosilica (mpSiO2) containing a p-phenylene vinylene (PPV) co-polymer partially grafted to the walls of the hybrid material (PPV${ \subset }$mpSiO2). This material was obtained by using a bis-silylated 2,5-bis(chloromethylphenylene) as the silicon precursor in combination with tetraethyl orthosilicate (TEOS) and cetyltrimethylammonium bromide (CTABr) as the surfactant. The final polymer was formed by adding appropriate amounts of 2,2-{[2,5-bis(chloromethyl)-1,4-phenylene]bis(oxy)}diethanol as the co-monomer and KtBuO as the base. The resulting PPV${ \subset }$mpSiO2 was characterized by XRD, SEM, TEM, FTIR spectroscopy, and magic angle spinning 29Si NMR spectroscopy; all spectroscopic data were in agreement with the presence of a conducting polymer. The resulting PPV${ \subset }$mpSiO2 material exhibits electrical conductivity, particularly after I2 doping, an electrochemical response, and electroluminescence. Laser flash photolysis studies of PPV${ \subset }$mpSiO2 indicate that this material can form PPV.+ polarons that could be responsible for the electrochemical and electroluminescent response., Financial support by the Spanish Ministry of Science and Education (CTQ2009-11587 and CTQ2010-18671) is gratefully acknowledged. M.B.-S. thanks also the Spanish ministry for a post-graduate scholarship (CTQ2007-67805).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Aerobic Oxidation of Styrenes Catalyzed by an Iron Metal Organic Framework

  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Aerobic oxidation of a series of styrenes to benzaldehyde, styrene oxide, and derivatives has been performed with N-hydroxyphthalimide loaded on Fe(BTC) (BTC: 1,3,5-benzenetricarboxylate) under di¿erent reaction conditions. A suitable mechanism based on peroxidation of the primary benzaldehyde has been proposed for the formation of styrene oxide based on the observed results, Financial support by the Spanish DGI (CTQ2009-11587 and CTQ2010-18671) is gratefully acknowledged. Funding of European Commission through an integrated project (MACADEMIA) is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Metal-organic frameworks as heterogeneous catalysts for oxidation reactions

  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
In this Perspective, we describe the use of metal-organic frameworks (MOFs) as heterogeneous catalysts for oxidations using hydroperoxides or molecular oxygen. These two types of oxidants fulfill the requirements of green chemistry in terms of environmental benignity and sustainability. For the sake of clarity and to illustrate the possibilities of using MOFs as oxidation catalysts, we have constrained ourselves to present the results obtained for the oxidation of cycloalkanes, oxidation of benzylic positions, oxidation of cycloalkenes and aerobic oxidation of alcohols. The use of MOFs as catalysts for enantioselective oxidations has been dealt with in a separate section in which the peculiarity of the required oxidants and the advantages of having homo chiral MOFs have been discussed. The key features of MOFs as catalysts, the similarities with inorganic porous solids and future developments in this field have been discussed in separate sections., Financial support by the Spanish DGI (CTQ2009-11587 and CTQ2010-18671 and Consolider MULTICAT) is gratefully acknowledged. Funding of European Commission through an integrated project (MACADEMIA) is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Metal organic frameworks as solid catalysts in condensation reactions of carbonyl groups

  • Dhakshinamoorthy, Amarajothi
  • Opanasenko, Maksym
  • Cejka, Jirí
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] This review summarizes the use of metal organic frameworks (MOFs) as solid catalysts for condensation reactions. After an introductory section, in which condensation reactions are generally presented, a list of the MOFs employed as condensation catalyst is given. The main part of the present review is organized according to the use of MOFs as solid acids, solid bases or as bi-functional solids containing both acid and basic sites. Throughout the review, the emphasis has been made on discussing the stability of the MOFs, their reusability and in providing a comparison of the performance of MOFs with respect to other homogeneous and heterogeneous catalysts. Finally, we summarize the current state-of-the-art and provide our view on future trends and developments in this field., Financial support by the Spanish DGI (CTQ 2009-11587, CTQ 2010-18671 and CONSOLIDER MULTICAT) is gratefully acknowledged. The research leading to these results has received funding from the European Communitys Seventh Framework Programme (FP7/2007-2013) under grant agreement no. 228862. J.Cˇ. thanks the Czech Science Foundation for financial support (Centre of Excellence – P106/12/G015)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Iron(III) metal-organic frameworks as solid Lewis acids for the isomerization of alpha-pinene oxide

  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Chevreau, Hubert
  • Horcajada Campos, Patricia
  • Devic, Thomas
  • Serre, Christian
[EN] A series of Fe3+-containing porous metal-organic frameworks (MOFs), including the commercial iron trimesate Basolite F-300 or Fe(BTC) (BTC: 1,3,5-benzenetricarboxylate) and the synthetic iron terephthalate MIL-88B (Fe3O(BDC)(3)X, X = Cl, OH, BDC = 1,4-benzenedicarboxylate), iron naphthalenedicarboxylate MIL-88C (Fe3O(NDC)(3)X, X = Cl, OH, NDC = 1,6-naphthalenedicarboxylate), iron trimesate MIL-100 (Fe3O(BTC)(2)X, X = Cl, OH) and iron azobenzenetetracarboxylate soc-MOF(Fe) or MIL-127 (Fe6O2(Tazb)(3)X-2, X = Cl, OH, Tazb = 3,3',5,5'-azobenzenetetracarboxylate; MIL stands for Materials from Institut Lavoisier), have been tested for the rearrangement of alpha-pinene oxide to camphonelal and isopinocamphone in the absence of solvent. Conversions of about 10% with 50% selectivity towards camphonelal were obtained. This catalytic performance has been compared with that of the copper trimesate Basolite C-300 or HKUST-1 of formula Cu-3(BTC)(2) and the aluminium terephthalate Basolite A-100 or MIL-53(Al) of formula Al(OH)(BDC) as well as with some homogeneous (ZnCl2, Cu(NO3)(2), Al(NO3)(3)) and heterogeneous (Fe3+-exchanged Y-zeolite) Lewis acids. Fe(BTC) also exhibits catalytic activity for the rearrangement of other epoxides (styrene, cyclohexene and norbornene oxides) under solventless conditions. Some partial deactivation of the Fe(BTC) with a slight degradation of the structure has nevertheless been observed., Financial support by the Spanish DGI (CTQ2009-11587, CTQ2010-18671 and CONSOLIDER MULTICAT) is gratefully acknowledged. Funding of European Commission through an integrated FP7 project MACADEMIA (FP7/2007-2013 Nr. 228862) is also acknowledged. Authors thank G. Maurin for kindly simulating accessible surface areas of the open form of flexible MIL-88 solids.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Metal Nanoparticles as Heterogeneous Fenton Catalysts

  • Dhakshinamoorthy, Amarajoth
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The Fenton reaction (the generation of hydroxyl radicals from hydrogen peroxide) is the most useful method for degradation of organic pollutants in aqueous solution at moderate concentrations. In this Review we summarize the use of metal nanoparticles, either unsupported or deposited on large-surface-area solids, as Fenton catalysts. The Review complements two other reviews in the field of heterogeneous Fenton catalysis using aluminosilicates and carbonaceous materials. Herein, particular emphasis is given to the reaction conditions in which these catalysts are used, highlighting the operating mechanism and the relative efficiency of the materials. Aspects such as leaching of the metal to the solution, reusability, and the concentration of hydrogen peroxide used are analyzed in detail. Besides a critical description of the present status of the field, future trends and the need to establishing valid comparisons to assess the relative efficiencies of the materials are commented on., Financial support by the Spanish DGI (Consolider-Ingenio 2010 Multicat and CTQ-2009-11587) is gratefully acknowledged. S.N. thanks the Technical University of Valencia for a postgraduate research contract (Cantera Programme).