Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Evaluation of several catalytic systems for the epoxidation of methyl oleate using H2O2 as oxidant

  • Torres, Miriam de
  • Jiménez-Osés, Gonzalo
  • Mayoral, José A.
  • Pires, Elísabet
  • Blanco Martín, Rosa María
  • Fernández, Óscar
The interest of epoxidation of fatty esters lies in the production of renewable and biodegradable intermediates. A plethora of epoxidizing conditions have been reported in the literature, but it remains difficult to evaluate their relative efficiency and sustainability. To this aim, we present here an evaluation of several catalytic systems for the epoxidation of methyl oleate, together with a green metrics study using atom economy (AE), reaction mass efficiency (RME), material recovery parameter (MRP), yield and reaction time as main parameters. This study reveals the distinct efficiency of the fatty ester epoxidation systems presented in this work. The use of hydrogen peroxide (H2O2) together with fluorinated solvents and aryldiselenide compounds as catalysts was found to be the most efficient methodology. Enzymatic epoxidation also arises as an efficient alternate way to obtain methyl 9,10-epoxystearate. CALB immobilized onto silica has shown a good activity and improved recyclability with respect to Novozym 435., The authors acknowledge E. L.A. (Energías Limpias Alternativas S. L.) (Project OTRI 2010/0529), CICYT (Project CTQ 2011-28124-C02-01), Diputación General de Aragón., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multiphase enantioselective Kharasch-Sosnovsky allylic oxidation based on neoteric solvents and copper complexes of ditopic ligands

  • Aldea, Luis
  • García, José I.
  • Mayoral, José A.
Recoverable multiphase enantioselective catalytic systems for the Kharasch–Sosnovsky oxidation of cycloalkenes with tert-butyl peroxybenzoate are described, based on the use of [BMIM][PF6] and a new solvent derived from glycerol as the catalyst reservoir phases, and chiral copper complexes with different ligands from the bis(oxazoline) family. The best results are obtained with the glycerol-derived solvent and a recently described azabisoxazoline-based ditopic ligand, allowing up to four uses of the catalytic phase with good results., This work was made possible by the generous financial support of the Ministerio de Economía y Competitividad (project CTQ2011-28124)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

New insights into the strength and accessibility of acid sites of sulfonated hydrothermal carbon

  • Fraile, José M.
  • García-Bordejé, José Enrique
  • Pires, Elísabet
  • Roldán, Laura
Sulfonation of hydrothermal carbon leads to a very active acid catalyst, in spite of the very low surface area determined by N2 physisorption and the even distribution of sulfonic groups, as demonstrated by scanning transmission electron microscopy analysis. However, CO2 adsorption at 273 K indicates the presence of ultramicropores, not detected with N2 at 77 K. Acidity was characterized by different procedures, but the most relevant was 31P solid state NMR of adsorbed triethylphosphine oxide. The solvent used for the adsorption is crucial, as the solid seems not to be acidic in hexane, but it shows acidic groups comparable to arylsulfonic ones when the adsorption takes place in methanol. This is probably due to the breakage of the network of hydrogen bonds that forms the ultramicropores, leading to an improved accessibility to the sites. This result is in agreement with the hydrophilicity of the solid, demonstrated by water adsorption., This work was made possible by the generous financial support of the Spanish “Ministerio de Economía y Competitividad” (Project CTQ2011-28124), the “Diputación General de Aragón” (E11 Group co-financed by the European Regional Development Funds) and the European Commission (FP7, FREECATS project Grant agreement no. 280658)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Predicting the enantioselectivity of the copper-catalysed cyclopropanation of alkenes by using quantitative quadrant-diagram representations of the catalysts

  • Aguado-Ullate, Sonia
  • Urbano-Cuadrado, Manuel
  • Villalba, Isabel
  • Pires, Elísabet
  • García, José I.
  • Bo, Carles
  • Carbó, Jorge J.
We present a new methodology to predict the enantioselectivity of asymmetric catalysis based on quantitative quadrant-diagram representations of the catalysts and quantitative structure–selectivity relationship (QSSR) modelling. To account for quadrant occupation, we used two types of molecular steric descriptors: the Taft–Charton steric parameter (ν(Charton)) and the distance-weighted volume (VW). By assigning the value of the steric descriptors to each of the positions of the quadrant diagram, we generated the independent variables to build the multidimensional QSSR models. The methodology was applied to predict the enantioselectivity in the cyclopropanation of styrene catalysed by copper complexes. The dataset comprised 30 chiral ligands belonging to four different oxazoline-based ligand families: bis- (Box), azabis- (AzaBox), quinolinyl- (Quinox) and pyridyl-oxazoline (Pyox). In the first-order approximation, we generated QSSR models with good predictive ability (r2=0.89 and q2=0.88). The derived stereochemical model indicated that placing very large groups at two diagonal quadrants and leaving free the other two might be enough to obtain an enantioselective catalyst. Fitting the data to a higher-order polynomial, which included crossterms between the descriptors of the quadrants, resulted in an improvement of the predicting ability of the QSSR model (r2=0.96 and q2=0.93). This suggests that the relationship between the steric hindrance and the enantioselectivity is non-linear, and that bulky substituents in diagonal quadrants operate synergistically. We believe that the quantitative quadrant-diagram-based QSSR modelling is a further conceptual tool that can be used to predict the selectivity of chiral catalysts and other aspects of catalytic performance., We acknowledge support from the Ministerio de Economía y Competividad (MINECO) of Spain (projects CTQ2008-06549-C02-01/BQU, CTQ2011-28124-C02-01, CTQ2011-29054-C02-01 and CTQ2011-29054-C02-02), from the Direcció General de Recerca (DGR) of the Autonomous Government of Catalonia (grants 2009SGR462, 2009SGR-00462) from the XRQTC and from the ICIQ Foundation., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Influence of Polarity and Activation Energy in Microwave-Assisted Organic Synthesis (MAOS)

  • Rodríguez, A.M.
  • Prieto, P.
  • Hoz, De La
  • Díaz-Ortiz, Á.
  • Martín, D.R.
  • García, J.I.
The aim of this work was to determine the parameters that have decisive roles in microwave-assisted reactions and to develop a model, using computational chemistry, to predict a priori the type of reactions that can be improved under microwaves. For this purpose, a computational study was carried out on a variety of reactions, which have been reported to be improved under microwave irradiation. This comprises six types of reactions. The outcomes obtained in this study indicate that the most influential parameters are activation energy, enthalpy, and the polarity of all the species that participate. In addition to this, in most cases, slower reacting systems observe a much greater improvement under microwave irradiation. Furthermore, for these reactions, the presence of a polar component in the reaction (solvent, reagent, susceptor, etc.) is necessary for strong coupling with the electromagnetic radiation. We also quantified that an activation energy of 20-30 kcal mol-1 and a polarity (µ) between 7-20 D of the species involved in the process is required to obtain significant improvements under microwave irradiation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Theoretical design of tetra(arenediyl)bis(allyl) derivatives as model compounds for Cope rearrangement transition states

  • Salvatella, L.
Several systems formed by two allyl fragments linked by four arenediyl tethers have been studied through DFT calculations. A delocalised bis(allyl) system, similar to Cope rearrangement transition states, is preferred for derivatives bearing 5-membered ring tethers, as a result of the large strain in the related localised geometry
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Biobased catalyst in biorefinery processes: Sulphonated hydrothermal carbon for glycerol esterification

  • de la Calle, C.
  • Fraile, J.M.
  • García-Bordejé, E.
  • Pires, E.
  • Roldán, L.
Sulphonated hydrothermal carbon (SHTC), obtained from D-glucose by mild hydrothermal carbonisation and subsequent sulphonation with sulphuric acid, is able to catalyse the esterification of glycerol with dif- ferent carboxylic acids, namely, acetic, butyric and caprylic acids. Product selectivity can be tuned by sim- ply controlling the reaction conditions. On the one hand, SHTC provides one of the best selectivity towards 20 monoacetins described up to now without the need for an excess of glycerol. On the other hand, excellent selectivity towards triacylglycerides (TAG) can be obtained, beyond those described with other solid cata- lysts, including well-known sulphonic resins. Recovery of the catalyst showed partial deactivation of the solid. The formation of sulphonate esters on the surface, confirmed by solid state NMR, was the cause of this behaviour. Acid treatment of the used catalyst, with subsequent hydrolysis of the surface sulphonate 25 esters, allows SHTC to recover its activity. The higher selectivity towards mono- and triesters and its renewable origin makes SHTC an attractive catalyst in biorefinery processes
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Polytopic bis(oxazoline)-based ligands for recoverable catalytic systems applied to the enantioselective Henry reaction

  • Angulo, B.
  • García, J. I.
  • Herrerías, C. I.
  • Mayoral, J. A.
  • Miñana, A. C.
Several kinds of polytopic chiral ligands (including ditopic, tritopic and tetratopic), based on the bis(oxazoline) and azabis(oxazoline) motifs, have been tested in the preparation of recoverable catalytic systems for the Henry reaction. The results obtained with the different ligands are, in general, good, but they point to the existence of a delicate balance between the coordinating ability of the ligand, the catalytic activity and the recovery of the catalyst by formation of the coordination polymer, related to the easiness to form oligomeric species in solution.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

An extremely highly recoverable clay-supported Pd nanoparticle catalyst for solvent-free Heck-Mizoroki reactions

  • Martínez, A.V.
  • Leal-Duaso, A.
  • García, J.I.
  • Mayoral, J.A.
Palladium nanoparticles supported on LAPONITE®, a synthetic clay, are shown to constitute a highly robust and stable catalytic system for Heck–Mizoroki reactions carried out under solventless conditions. Both the preparation and the use of the catalyst are straightforward, allowing easy separation of the reaction products in pure form. In the case of the reaction between butyl acrylate and iodobenzene, up to 50 catalyst cycles can be performed before observing a noticeable decrease in activity. After reactivation of the catalyst by calcination, it can be further used for at least an additional 25 reactions. The stability of the catalyst seems to be related to the electronic density of the reacting alkene, as illustrated by the results obtained using the same catalyst with other alkenes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Microwave-promoted solventless Mizoroki-Heck reactions catalysed by Pd nanoparticles supported on laponite clay

  • Martínez, A.V.
  • Invernizzi, F.
  • Leal-Duaso, A.
  • Mayoral, J.A.
  • García, J.I.
A new family of solid catalysts has been prepared by supporting palladium nanoparticles on a synthetic clay (laponite) using a straightforward and robust procedure. These solids have been used as catalysts in a Mizoroki–Heck reaction, in solventless conditions, activated by microwave radiation. Complete conversions and high product yields can be obtained in a few minutes, and the catalyst can be efficiently recovered by extracting reaction products in essentially pure form. In the best cases, catalysts can be used up to thirteen times with good results.