Skip to main content

CATALIZADORES CU-OXIDOS MIXTOS PARA LA COMBUSTION DE CARBONILLA Y ELIMINACION DE NOX POR ALMACENAMIENTO Y REDUCCION

CTQ2012-30703

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2012
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Secretaría de Estado de Investigación, Desarrollo e Innovación
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Pt/CexPr1−xO2 (x = 1 or 0.9) NOx storage–reduction (NSR) catalysts

  • Rico Pérez, Verónica
  • Bueno López, Agustín
  • Kim, Dae Jung
  • Ji, Yaying
  • Crocker, Mark
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
Model Pt/Ce0.9Pr0.1O2 and Pt/CeO2 NOx storage–reduction catalysts were prepared via nitrate calcination, co-precipitation and carbon-templating routes. Raman spectroscopic data obtained on the catalysts indicated that the introduction of praseodymium into the ceria lattice increased the concentration of defect sites (vacancies), arising from the higher reducibility of the Pr4+ cation compared to Ce4+. For the Pr-promoted samples, H2-TPR profiles contained high temperature bulk reduction peaks which were less pronounced compared with their ceria analogs, indicating that the presence of praseodymium enhances oxygen mobility due to the creation of lattice defects. Under lean-rich cycling conditions, the cycle-averaged NOx conversion of the Pt/Ce0.9Pr0.1O2 samples was in each case substantially higher than that of the Pt/CeO2 analog, amounting to a difference of 10–15% in the absolute NOx conversion in some cases. According to DRIFTS data, a double role can be assigned to Pr doping; on the one hand, Pr accelerates the oxidation of adsorbed NOx species during the lean periods. On the other hand, Pr doping destabilizes the adsorbed NOx species during the rich periods, and the kinetics of nitrate decomposition are faster on Pt/Ce0.9Pr0.1O2, leading to improved catalyst regeneration. These results suggest that ceria-based mixed oxides incorporating Pr are promising materials for NOx storage–reduction catalysts intended for low temperature operation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Rapid-Scan Operando Infrared Spectroscopy

  • Davó-Quiñonero, Arantxa
  • Bueno López, Agustín
  • Lozano-Castello, Dolores
  • McCue, Alan J.
  • Anderson, James A.
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
Novel methodology, referred to as rapid-scan operando, has been demonstrated to be a highly powerful tool for studying reaction mechanisms in heterogeneous catalysis, because it combines rapid scan for IR monitoring in the milliseconds time frame and operando methodology. As proof of concept, the NOx–CO and NOx–H2 reactions were studied as model catalyzed reactions with practical interest for removal of NOx in diesel exhausts. Rapid-scan operando experiments confirmed state-of-the-art knowledge concerning the reaction mechanisms and, more importantly, allowed us to elucidate, for the first time, the different roles of the surface hydroxy groups depending on the reductant used (CO or H2). Moreover, this new tool was used to distinguish the behavior of carbonates and nitrites under reaction conditions that could not be monitored by conventional IR spectroscopy approaches owing to overlap of their absorbance bands.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Potassium-copper perovskite catalysts for mild temperature diesel soot combustion

  • López Suárez, Franz Edwin
  • Bueno López, Agustín
  • Illán-Gómez, María José
  • Trawczynski, Janusz
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Illán-Gómez, María José|||/items/c60edb64-b18b-4119-bf4b-4dae3cc71c22
  • López Suárez, Franz Edwin|||/items/03f755cb-b680-4427-982f-28b377a4ce3b
The activity and stability of potassium-copper perovskite catalysts for soot combustion were analysed at 450 °C in a NOx/O2 gas mixture. Both impregnated (K-Cu/SrTiO3) and substituted (SrKTiCuO3) copper-potassium catalysts were prepared. For comparative purpose, also a potassium substituted catalyst (SrKTiO3) was studied. The high activity of the fresh potassium catalyst (SrKTiO3) is based on the volatile potassium species reaching the surface of soot. However, this catalyst is not useful because potassium is progressively lost during the reaction. Potassium was stabilized by copper and, as a consequence, the two potassium-copper perovskite catalysts present a constant activity for the soot combustion. The activity of the potassium-copper perovskite catalysts, which is maintained during consecutive reactions, is related to their NO2 production capacity. The metal addition method seems to influence the catalysts performance, the substituted catalyst (SrKTiCuO3) being the most active and stable.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Role of the different copper species on the activity of Cu/zeolite catalysts for SCR of NOx with NH3

  • Pereda-Ayo, Beñat
  • De-La-Torre, Unai
  • Illán-Gómez, María José
  • Bueno López, Agustín
  • González-Velasco, Juan R.
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Illán-Gómez, María José|||/items/c60edb64-b18b-4119-bf4b-4dae3cc71c22
The SCR of NOx with NH3 has been studied by using different Cu zeolite catalysts, prepared both with ZSM5 and BETA zeolite supports by ionic exchange or by impregnation. The catalysts were characterized by ICP-AES, N2 adsorption at −196 °C, XRD, TEM, XPS and H2-TPR. The catalysts characterization confirmed the presence of different Cu(II) species on all catalyst (CuO and Cu(II) exchanged on tetrahedral and octahedral positions of the zeolites framework). Clear evidences of Cu(I) or Cu(0) species were not obtained. CuO was more abundant in high copper-content catalysts and in ZSM5 catalysts, due to its lower ionic exchange capacity, while isolated Cu(II) ions are more abundant in low copper-content catalysts and in BETA catalysts. It was concluded that CuO catalyzes the oxidation of NO to NO2, and this favors the reduction of NOx at lower temperature (the NH3-NO2 reaction is faster than the NH3-NO reaction because NO2 is much more oxidizing than NO), whereas isolated Cu(II) ions maintain high NOx conversion at high temperatures.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Improving ceria-zirconia soot combustion catalysts by neodymium doping

  • Hernández Giménez, Ana M.
  • Xavier, Leandro P. dos Santos
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
The effect of Nd doping on the physicochemical and catalytic properties for soot combustion of CeO2 and CeO2-ZrO2 oxides has been studied. Four oxides with composition CeO2, Ce0.9Nd0.1O2, Ce0.73Zr0.27O2 and Ce0.64Zr0.27Nd0.09O2 have been prepared by co-precipitation and calcination at 800 °C, characterized by XRD, Raman Spectroscopy, N2 adsorption and temperature programmed reduction by H2, and tested for soot combustion with NOx/O2. The catalytic activity for soot combustion of CeO2 and Ce0.9Nd0.1O2 was null due to thermal sintering (1 and 5 m2/g, respectively), and Zr-doping is mandatory to prevent such sintering. The best catalytic activity for soot combustion was obtained with Ce0.64Zr0.27Nd0.09O2 (37 m2/g), and as far as we know, it is the first time that this improvement on Ce-Zr soot combustion capacity by Nd doping is reported. Ce0.64Zr0.27Nd0.09O2 combines the beneficial effect of both Zr doping (improved thermal stability and redox properties) and Nd doping (additional benefit on redox properties by oxygen vacancies creation due to 3+ cations doping into the lattice). The highest activity for soot combustion of Ce0.64Zr0.27Nd0.09O2 is related with its highest NO oxidation capacity. As deduced by in situ DRIFTS experiments, Nd-doping into the Ce-Zr oxide favors the formation of less stable surface nitrogen species (nitrates and nitrites were detected) in comparison to those formed on Ce0.73Zr0.27O2 (only nitrates were detected) providing alternative and faster NO2 production pathways.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Diesel soot combustion catalysts: review of active phases

  • Hernández Giménez, Ana M.
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
The most relevant information about the different active phases that have been studied for the catalytic combustion of soot is reviewed and discussed in this article. Many catalysts have been reported to accelerate soot combustion, including formulations with noble metals, alkaline metals and alkaline earth metals, transition metals that can accomplish redox cycles (V, Mn, Co, Cu, Fe, etc.), and internal transition metals. Platinum catalysts are among those of most interest for practical applications, and an important feature of these catalysts is that sulphur-resistant platinum formulations have been prepared. Some metal oxide-based catalysts also appear to be promising candidates for soot combustion in practical applications, including ceria-based formulations and mixed oxides with perovskite and spinel structures. Some of these metal oxide catalysts produce highly reactive active oxygen species that promote efficient soot combustion. Thermal stability is an important requirement for a soot combustion catalyst, which precludes the practical utilisation of several potential catalysts such as most alkaline metal catalysts, molten salts, and metal chlorides. Some noble metal catalysts are also unstable due to the formation of volatile oxides (ruthenium, iridium, and osmium).
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Preparation, characterisation and testing of CuO/Ce0.8Zr0.2O2 catalysts for NO oxidation to NO2 and mild temperature diesel soot combustion

  • Giménez-Mañogil, Javier
  • Bueno López, Agustín
  • Garcia-Garcia, Avelina
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Garcia-Garcia, Avelina|||/items/808fe91f-4dad-4bdc-9433-6321f321e568
CuO/ceria-zirconia catalysts have been prepared, deeply characterised (N2 adsorption–desorption isotherms at −196 °C, XRD, Raman spectroscopy, XPS, TEM and H2-TPR) and tested for NO oxidation to NO2 in TPR conditions, and for soot combustion at mild temperature (400 °C) in a NOx/O2 stream. The behaviour has been compared to that of a reference Pt/alumina commercial catalyst. The ceria-zirconia support was prepared by the co-precipitation method, and different amounts of copper (0.5, 1, 2, 4 and 6 wt%) were loaded by incipient wetness impregnation. The results revealed that copper is well-dispersed onto the ceria-zirconia support for the catalysts with low copper loading and CuO particles were only identified by XRD in samples with 4 and 6% of copper. A very low loading of copper increases significantly the activity for the NO oxidation to NO2 with regard to the ceria-zirconia support and an optimum was found for a 4% CuO/ceria-zirconia composition, showing a very high activity (54% at 348 °C). The soot combustion rate at 400 °C obtained with the 2% CuO/ceria-zirconia catalyst is slightly lower to that of 1% Pt/alumina in terms of mass of catalyst but higher in terms of price of catalyst.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Effect of RhOx/CeO2 Calcination on Metal-Support Interaction and Catalytic Activity for N2O Decomposition

  • Rico Pérez, Verónica
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
The effect of the calcination conditions on the catalytic activity for N2O decomposition of 2.5% RhOx/CeO2 catalysts has been investigated. Ramp and flash calcinations have been studied (starting calcinations at 25 or 250/350 °C, respectively) both for cerium nitrate and ceria-impregnated rhodium nitrate decomposition. The cerium nitrate calcination ramp has neither an effect on the physico-chemical properties of ceria, observed by XRD, Raman spectroscopy and N2 adsorption, nor an effect on the catalysts performance for N2O decomposition. On the contrary, flash calcination of rhodium nitrate improved the catalytic activity for N2O decomposition. This is attributed to the smaller size of RhOx nanoparticles obtained (smaller than 1 nm) which allow a higher rhodium oxide-ceria interface, favoring the reducibility of the ceria surface and stabilizing the RhOx species under reaction conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Simultaneous catalytic oxidation of carbon monoxide, hydrocarbons and soot with Ce–Zr–Nd mixed oxides in simulated diesel exhaust conditions

  • Xavier, Leandro P. dos Santos
  • Rico Pérez, Verónica
  • Hernández Giménez, Ana M.
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
Ce0.73−xZr0.27NdxO2 mixed oxides (x ≤ 0.3) were prepared, characterized by XRD, Raman spectroscopy, N2 adsorption isotherms and H2-TPR, and tested for simultaneous CO, propylene, benzene and soot oxidation in a gas mixture containing O2, NOx, H2O, CO2, CO, propylene (model aliphatic hydrocarbon) and benzene (model aromatic hydrocarbon) that simulates a diesel exhaust. Ce–Zr mixed oxide doping with a low atomic fraction of neodymium (0.01 ≤ x ≤ 0.09) promotes the creation of oxygen vacancies, has a minor effect in the BET specific surface areas of the oxides, increases the surface ceria reducibility and has a positive effect in the catalytic activity. On the contrary, higher neodymium atomic fractions (x = 0.2 and 0.3) promote sintering, with a drastic decrease of the BET specific surface area, surface reducibility and catalytic activity. The Ce0.73−xZr0.27NdxO2 catalysts with x ≤ 0.09 are able to accelerate simultaneously soot, propylene and benzene combustion, and as a general trend, the catalytic behavior of Ce0.73Zr0.27O2 is improved by low atomic fraction neodymium doping (0.01 ≤ x ≤ 0.09). These Ce0.73−xZr0.27NdxO2 mixed oxides with 0.01 ≤ x ≤ 0.09 are also able to accelerate CO oxidation in a certain extent, but there is a net production of CO during soot combustion because the oxidation capacity of these oxides is not high enough to oxidize all CO released as soot combustion product.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Diesel soot combustion ceria catalysts

  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
Different aspects of the ceria-catalyzed Diesel soot combustion reactions have been critically discussed, such as the high catalytic activity of ceria for Diesel soot combustion in comparison to some other potential catalysts, the potential ceria-catalyzed Diesel soot combustion mechanisms (the so-called NO2-assisted mechanism and the active oxygen mechanism) and the effect of ceria doping with suitable cations like those of Pr, La or Zr. Ceria must be doped in order to enhance thermal stability, but ceria doping also changes different physicochemical and catalytic properties of ceria. Zr-doping, for instance, has a double role on ceria as soot combustion catalyst: enhances ceria oxidation capacity of the adsorbed NOx species (positive effect) but stabilizes NO2 on surface (negative effect). The surface properties of a ceria catalyst are usually more important than those of bulk: high surface area/small crystal size usually has a positive effect on the catalyst performance and, in mixed oxides, the surface composition also plays a role. The optimal dopant loading depends on the foreign cation being, for instance, around 5–10%, 20–30% and 50 mol% for La3+, Zr4+, and Pr3+/4+, respectively.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Catalytic regeneration of Diesel Particulate Filters: Comparison of Pt and CePr active phases

  • Rico Pérez, Verónica
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
Diesel Particulate Filters (DPFs) have been loaded with the same amount (0.6 wt.%) of either Pt or an optimized CePr active phase, and an experimental set-up has been designated and used to investigate the catalytic combustion of soot under realistic reaction conditions. Both active phases were stable under reaction conditions, with no evidences of deactivation in consecutive combustion experiments. The presence of H2O and CO2 together with NOx and O2 in the gas mixture slightly delays soot combustion to higher temperatures, but the effect is equal for the Pt and CePr active phases. The mass of soot loaded into the filters had no effect in the catalytic regeneration of the DPFs for soot:catalyst weigh ratios below 0.4, while it was hindered above this ratio. The Pt and CePr active phases behave equal until 0.6 soot:catalyst weigh ratio and Pt performance was slightly better for higher soot loading. This difference is explaining according to the main soot combustion mechanisms occurring during Pt–DPF (NO2-assited) and CePr–DPF regeneration (active oxygen). The CO2 selectivity is near 100% for both catalysts in all the experimental reaction conditions evaluated. According to this study, the CePr active phase seems to be a promising candidate to replace Pt in real applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Effect of the CeZrNd mixed oxide synthesis method in the catalytic combustion of soot

  • González Mira, Jorge
  • Rico Pérez, Verónica
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
Ce0.64Zr0.27Nd0.09Oδ mixed oxides have been prepared by three different methods (nitrates calcination, coprecipitation and microemulsion), characterized by N2 adsorption, XRD, H2-TPR, Raman spectroscopy and XPS, and tested for soot combustion in NOx/O2. The catalyst prepared by microemulsion method is the most active one, which is related to its high surface area (147 m2/g) and low crystallite size (6 nm), and the lowest activity was obtained with the catalyst prepared by coprecipitation (74 m2/g; 9 nm). The catalyst prepared by nitrates precursors calcination is slightly less active to that prepared by microemulsion, but the synthesis procedure is very straightforward and surfactants or other chemicals are not required, being very convenient for scaling up and practical utilization. The high activity of the catalyst prepared by nitrates calcination can be attributed to the better introduction of Nd cations into the parent ceria framework than on catalysts prepared by coprecipitation and microemulsion, which promotes the creation of more oxygen vacancies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Effect of CO2, H2O and SO2 in the ceria-catalyzed combustion of soot under simulated diesel exhaust conditions

  • Hernández Giménez, Ana M.
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
The effect of CO2, H2O and SO2 in the Ce0.73Zr0.27O2 and Ce0.64Zr0.27Nd0.09O2 catalyzed combustion of soot with NOx + O2 has been studied. Combustion experiments performed in a fix-bed reactor with soot-catalyst mixtures prepared in loose contact mode showed that CO2, H2O and SO2 lower the activity of both catalysts, and the inhibiting effect follows the trend SO2 > H2O > CO2. Regardless the gas mixture composition, the catalytic activity for soot combustion of Ce0.64Zr0.27Nd0.09O2 is equal or higher to that of Ce0.73Zr0.27O2 because Nd3+ doping seems to promote the participation of the active oxygen mechanism together with the NO2-assisted mechanism in the catalytic combustion of soot. The maximum soot combustion rate achieved during a Ce0.64Zr0.27Nd0.09O2-catalyzed reaction in NOx/O2/CO2/H2O/N2 is about three times higher than that of the uncatalyzed combustion, and this catalyst also improves the CO2 selectivity. In situ DRIFTS experiments showed that CO2, H2O and SO2 compete with NOx for the adsorption sites on the catalysts’ surface. CO2 partially impedes the catalytic oxidation of NO to NO2, affecting much more to the Nd3+-containing catalyst; however, the contribution of the active oxygen mechanism seems to remain relevant in this case. H2O also hinders the catalytic oxidation of NO to NO2 on both catalysts, and therefore the catalytic combustion of soot, because delays the formation of nitrogen reaction intermediates on the catalysts’ surface and favors the formation of more stable nitrogen surface species than in a H2O-free gas stream. For both catalysts, SO2 chemisorption (with sulfate formation) is even able to remove nitrogen surface groups previously formed by NOx chemisorption, which significantly inhibits the catalytic oxidation of NO to NO2 and the catalytic combustion of soot.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Opportunities for ceria-based mixed oxides versus commercial platinum-based catalysts in the soot combustion reaction. Mechanistic implications

  • Giménez-Mañogil, Javier
  • Garcia-Garcia, Avelina
  • Garcia-Garcia, Avelina|||/items/808fe91f-4dad-4bdc-9433-6321f321e568
The aim of this paper is to study the activities of ceria–zirconia and copper/ceria–zirconia catalysts, comparing with a commercial platinum/alumina catalyst, for soot combustion reaction under different gas atmospheres and loose contact mode (simulating diesel exhaust conditions), in order to analyse the kinetics and to deduce mechanistic implications. Activity tests were performed under isothermal and TPR conditions. The NO oxidation to NO2 was studied as well. It was checked that mass transfer limitations were not influencing the rate measurements. Global activation energies for the catalysed and non-catalysed soot combustion were calculated and properly discussed. The results reveal that ceria-based catalysts greatly enhance their activities under NOx/O2 between 425 °C and 450 °C, due to the “active oxygen”-assisted soot combustion. Remarkably, copper/ceria–zirconia shows a slightly higher soot combustion rate than the Pt-based catalyst (under NOx/O2, at 450 °C).
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

BaTi1−xCuxO3 perovskites: The effect of copper content in the properties and in the NOx storage capacity

  • Albaladejo-Fuentes, Vicente
  • López Suárez, Franz Edwin
  • Sánchez-Adsuar, María Salvadora
  • Illán-Gómez, María José
  • Illán-Gómez, María José|||/items/c60edb64-b18b-4119-bf4b-4dae3cc71c22
  • López Suárez, Franz Edwin|||/items/03f755cb-b680-4427-982f-28b377a4ce3b
  • Sánchez-Adsuar, María Salvadora|||/items/de555fe8-1c05-47d8-a8a3-069794d12f14
BaTi1−xCuxO3 perovskites have been prepared by the Pechini's sol-gel method and the effect of copper in the structural and physico-chemical properties of the perovskites and in the performance of the catalysts for NOx storage has been studied. XRD and Raman spectroscopy results indicate that all the copper containing catalysts present a distortion of the original tetragonal structure due to the incorporation of copper into the lattice. The XPS and H2-TPR results reveal that the copper catalysts, except for BaTiCu0,5 catalyst, present two copper species (with different electronic interaction with the perovskite) and active surface oxygen species. Additionally, it seems that the fraction of copper with a strong electronic interaction with the perovskite or incorporated into the perovskite structure increases with the copper content. The active sites created on the BaTi1−xCuxO3 perovskite surface bring to the catalysts activity for the NO to NO2 oxidation and for the NOx adsorption. The NOx storage capacity increases with the copper content and reaches a limit for the BaTiCu2 catalyst (300 μmol/g, at 420 °C) which is within the range of the values reported for the noble metal-based catalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Active oxygen by Ce–Pr mixed oxide nanoparticles outperform diesel soot combustion Pt catalysts

  • Guillén Hurtado, Noelia
  • Garcia-Garcia, Avelina
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Garcia-Garcia, Avelina|||/items/808fe91f-4dad-4bdc-9433-6321f321e568
A Ce0.5Pr0.5O2 mixed oxide has been prepared with the highest surface area and smallest particle size ever reported (125 m2/g and 7 nm, respectively), also being the most active diesel soot combustion catalyst ever tested under realistic conditions if catalysts forming highly volatile species are ruled out. This Ce–Pr mixed oxide is even more active than a reference platinum-based commercial catalyst. This study provides an example of the efficient participation of oxygen species released by a ceria catalyst in a heterogeneous catalysis reaction where both the catalyst and one of the reactants (soot) are solids. It has been concluded that both the ceria-based catalyst composition (nature and amount of dopant) and the particle size play key roles in the combustion of soot through the active oxygen-based mechanism. The composition determines the production of active oxygen and the particle size the transfer of such active oxygen species from catalyst to soot.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Synergic effect of Cu/Ce0.5Pr0.5O2-δ and Ce0.5Pr0.5O2-δ in soot combustion

  • Rico Pérez, Verónica
  • Aneggi, Eleonora
  • Bueno López, Agustín
  • Trovarelli, Alessandro
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
A series of 5%Cu/Ce0.5Pr0.5O2-δ and Ce0.5Pr0.5O2-δ mixed oxides have been prepared and combined in different ratios. The resulting catalysts have been characterized by N2 adsorption, XRD, Raman spectroscopy and H2-TPR and tested for soot combustion by means of temperature-programmed experiments. The optimum catalyst for soot combustion in NOx/O2/N2 atmosphere is the mixture containing 40% Cu/Ce0.5Pr0.5O2-δ and 60% Ce0.5Pr0.5O2-δ. This mixture is more active than a reference catalyst containing the same amount of copper distributed in the whole Ce-Pr mixed oxide support. The benefit of mixing Ce0.5Pr0.5O2-δ particles with and without copper in a single catalyst formulation is that the participation of the two soot combustion mechanisms based on active oxygen and NO2, respectively, is optimized. The particles with copper mainly promote the catalytic oxidation of NO to NO2 (the NOx-assisted mechanism) while those without copper are more effective in promoting the active oxygen mechanism. If copper is loaded homogeneously in all the Ce0.5Pr0.5O2-δ particles, the positive effect of copper improving NO2 production is offset by the lower efficiency of the active oxygen mechanism, due to a lack of active oxygen on the Ce0.5Pr0.5O2-δ support.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Behavior of different soot combustion catalysts under NOx/O2. Importance of the catalyst–soot contact

  • Guillén Hurtado, Noelia
  • López Suárez, Franz Edwin
  • Bueno López, Agustín
  • Garcia-Garcia, Avelina
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Garcia-Garcia, Avelina|||/items/808fe91f-4dad-4bdc-9433-6321f321e568
  • López Suárez, Franz Edwin|||/items/03f755cb-b680-4427-982f-28b377a4ce3b
Four different catalysts (Pt/Al2O3, Ce0.8Zr0.2O2, PrO2−x and SrTiCuO3) have been investigated on a laboratory scale to evaluate their potential as diesel soot combustion catalysts under different experimental conditions, which simulate the situation found in a continuous regeneration technology trap (dual-bed configuration of catalyst and soot) or a catalyst-coated filter system (single-bed configuration, both catalyst and soot particles mixed under loose-contact mode). Under dual-bed configuration, the behavior of the catalysts towards soot combustion are very similar, despite the differences observed in the NO2 production profiles. However, under single-bed configuration, there are important differences in the soot combustion activities and in the NO2 slip profiles. The configurations chosen have an enormous impact on CO/(CO + CO2) ratios of combustion products as well. The most active catalyst under NOx + O2 is PrO2−x combining a high contribution of active oxygen-assisted soot combustion as well as high NO2 production activity along the catalytic bed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Preparation of RhOx/CeyPr1−yO2 N2O decomposition catalysts by rhodium nitrate impregnation with different solvents

  • Rico Pérez, Verónica
  • Salinas Martínez de Lecea, Concepción
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
The effect of the solvent (water, ethanol or acetone) used to impregnate CeyPr1−yO2 (y = 1, 0.9 or 0.5) supports with rhodium nitrate, in order to prepare N2O decomposition catalysts, has been studied. RhOx/CeyPr1−yO2 catalysts were prepared and characterized by N2 adsorption at −196 °C, XRD, Raman spectroscopy, TEM, XPS and H2-TPR. The activity for N2O decomposition of the catalysts studied was related with the RhOx-support interaction, and both the nature of the ceria support and of the solvent used for rhodium impregnation affected such interaction. Ceria doping with 10% praseodymium had a positive effect in the RhOx-support interaction, but the benefit on the catalytic activity was only obtained for water impregnation because the temperature peaks created during calcination of ethanol and acetone-impregnated catalysts promoted Ce0.9Pr0.1O2 and RhOx sintering. The interaction between RhOx and Ce0.5Pr0.5O2 was not as good as that with Ce0.9Pr0.1O2. The best catalyst was obtained by impregnating Ce0.9Pr0.1O2 with a water solution of rhodium. However, if acetone or ethanol must be used for any reason the pure ceria support is more suitable (under the calcination conditions of this study; 250 to 500 °C at 10 °C/min) because do not sinters during solvents combustion.