Skip to main content

DESARROLLO INTEGRADO DE PRODUCCION ENZIMATICA DE BIODIESEL DE 2ª GENERACION

CTQ2013-42391-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD AUTONOMA DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enzyme-catalyzed preparation of chenodeoxycholic esters by an immobilized heterologous Rhizopus oryzae lipase

  • Quintana, Paula G.
  • Canet, Albert|||0009-0000-8487-8176
  • Marciello, Marzia
  • Valero, Francisco|||0000-0003-0429-9620
  • Palomo, Jose M.
  • Baldessari, Alicia
A lipase-catalyzed preparation of ethyl and stearyl esters of chenodeoxycholic acid is described. Stearyl chenodeoxycholate is a new product and both bile acid esters were prepared through an enzymatic approach for the first time. The heterologous Rhizopus oryzae lipase, immobilized on two different supports proved to be an efficient catalyst, even more active than Candida antarctica lipase, in the esterification reaction using a complex substrate such as a bile acid. The immobilization of the enzyme on Octadecyl Sepabeads at pH 7 and 25 °C was the best choice to catalyze the esterification reaction. The influence of various reaction parameters, such as nature of the alcohol, alcohol:substrate ratio, enzyme:substrate ratio, solvent and temperature, was evaluated. Using the response surface methodology and a central composite rotatable design, the conversion of stearyl chenodeoxycholate was optimized by means of the study of the effect of enzyme:substrate ratio and alcohol:substrate ratio. The value 20 for ratios (E/S) and (A/S) was predicted as the optimal value to reach the maximum conversion. However, including economic aspects these ratios can be reduced up to 15. The well-known advantages of biocatalysis and the activity shown by the immobilized heterologous lipase make the reported procedure a convenient way to prepare chenodeoxycholic esters.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Camelina oil as a source of polyunsaturated fatty acids for the production of human milk fat substitutes catalyzed by a heterologous Rhizopus oryzae lipase

  • Faustino, Ana Rita
  • Osório, Natália M.
  • Tecelão, Carla
  • Canet, Albert|||0009-0000-8487-8176
  • Valero, Francisco|||0000-0003-0429-9620
  • Ferreira-Dias, Suzana
This study aims to produce human milk fat substitutes (HMFS) rich in polyunsaturated fatty acids (PUFA), mainly the essential omega-3 linolenic acid, by acidolysis reaction between tripalmitin (PPP) and free fatty acids (FFA) from camelina oil, in stirred batch reactor and solvent-free media. The non-commercial heterologous Rhizopus oryzae lipase (rROL), immobilized on Lewatit VP OC 1600 or on Relizyme OD403/S, and the immobilized commercial lipase from Rhizomucor miehei (Lipozyme RM IM) were tested as biocatalysts. Both lipases are sn-1,3 selective. After 24 h reaction at 60°C, using biocatalyst loads of 5 wt% (in relation to tripalmitin), 48.9, 43.6, and 18.3 mol% of fatty acid incorporation in triacylglycerols (TAG) were obtained with Lipozyme RM IM and rROL immobilized on Lewatit or on Relizyme, respectively. rROL immobilized on Lewatit was selected as biocatalyst for the acidolysis, as alternative to the commercial immobilized lipases. With this biocatalyst, the molar incorporation increased with its initial water activity (0.55-0.95). Modeling acidolysis catalyzed by rROL immobilized on Lewatit was performed by response surface methodology, as a function of temperature (58-72°C) and molar ratio FFA:PPP (1.2:1-6.8:1). The highest PPP consumption was achieved at 60°C with a molar ratio of 2:1. The yield of HMFS (new TAG) increased from 42.6 wt% (5% biocatalyst load) to 52% with 8% load, after 24 h acidolysis. Practical applications: Camelina oil showed to be a good source of PUFA, mainly essential fatty acids, to incorporate in HMFS. After 24 h acidolysis under optimized conditions, catalyzed by the non-commercial sn-1,3 regioselective rROL immobilized on Lewatit VP OC 1600, the TAG fraction contains 67.7 mol% of palmitic acid at position 2. These structured lipids rich in PUFA can be used in blends with 1,3-dioleoyl-2-palmitoyl-glycerol (OPO) in order to mimic the human milk fat. The performance of this biocatalyst was comparable to that observed with Lipozyme RM IM. The replacement of high-cost commercial immobilized lipases by rROL immobilized on Lewatit may reduce the biocatalyst cost. In addition, since the best molar ratio FFA:PPP for rROL is 2:1, i.e., the stoichiometric value for the acidolysis catalyzed by sn-1,3 regioselective lipases, the use of this biocatalyst will reduce downstream costs related with unconverted FFA recovery.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enzymatic biodiesel synthesis from yeast oil using immobilized recombinant Rhizopus oryzae lipase

  • Duarte, Susan Hartwig
  • Peso Hernández, Gonzalo Lázaro del
  • Canet, Albert|||0009-0000-8487-8176
  • Benaiges, M. Dolors|||0000-0002-6840-1981
  • Maugeri, Francisco
  • Valero, Francisco|||0000-0003-0429-9620
The recombinant Rhizopus oryzae lipase (1-3 positional selective), immobilized on Relizyme OD403, has been applied to the production of biodiesel using single cell oil from Candida sp. LEB-M3 growing on glycerol from biodiesel process. The composition of microbial oil is quite similar in terms of saponifiable lipids than olive oil, although with a higher amount of saturated fatty acids. The reaction was carried out in a solvent system, and n-hexane showed the best performance in terms of yield and easy recovery. The strategy selected for acyl acceptor addition was a stepwise methanol addition using crude and neutralized single cell oil, olive oil and oleic acid as substrates. A FAMEs yield of 40.6% was obtained with microbial oils lower than olive oil 54.3%. Finally in terms of stability, only a lost about 30% after 6 reutilizations were achieved.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Production of MLM Type Structured Lipids From Grapeseed Oil Catalyzed by Non-Commercial Lipases

  • Costa, Carolina M.
  • Osório, Natália M.
  • Canet, Albert|||0009-0000-8487-8176
  • Rivera, Ivanna|||0000-0002-4650-4605
  • Sandoval, Georgina|||0000-0002-9105-0702
  • Valero, Francisco|||0000-0003-0429-9620
  • Ferreira-Dias, Suzana
Low calorie triacylglycerols (TAG) presenting medium-chain fatty acids (M) at positions sn-1,3 and long-chain fatty acids (L) at position sn-2 are known as MLM. This study aims at the production of MLM by acidolysis of grapeseed oil with medium-chain caprylic (C8:0) or capric (C10:0) acids. Grapeseed oil is used as source of long-chain polyunsaturated fatty acids (FAs), especially linoleic acid, at sn-2 position in TAG. Reactions are performed in batch, in solvent-free systems, during 48 h. Novel non-commercial sn-1,3 regioselective lipases are used as alternative to high-cost commercial biocatalysts, namely, the heterologous lipase from Rhizopus oryzae (rROL) immobilized in Amberlite™ IRA 96 and Carica papaya lipase (CPL) self-immobilized in papaya latex. The highest productions of new TAG are achieved at 40 °C, molar ratio TAG:M of 1:2, after 48 h, with both biocatalysts, with yields varying between 38 and 69%. rROL immobilized in Amberlite IRA 96 shows a preference toward caprylic acid while CPL shows no preference toward caprylic or capric acid. First-order deactivation kinetics is observed for both biocatalysts. Half-lives at 40 °C are 166 and 118 h for rROL and 96 and 81 h for CPL, in the acidolysis of grapeseed oil with C8:0 or C10:0, respectively. Practical Applications: Grapeseeds of Vitis vinifera L. are a by-product of the wine industry. Using grapeseed oil to produce added-value functional oils rich in linoleic acid (essential fatty acid) may be a way of improving the revenues of the enological and oil sectors. Both lipases, and mainly Carica papaya lipase self-immobilized in papaya latex, due to its low-cost production and easy preparation, are promising non-commercial biocatalysts for the synthesis of MLM in solvent-free media. The use of a solvent-free system, in addition of being a green option, is also preferred for economic reasons, avoiding the costs with solvent and solvent recovery. Also, the use of the stoichiometric molar ratio TAG:M of 1:2 will 1) decrease costs related with the recovery and reutilization of medium chain fatty acids in excess, product recovery and purification, and 2) avoid biocatalyst deactivation by high amounts of free fatty acids in reaction media. Both Carica papaya lipase (CPL) self-immobilized in papaya latex and rROL in Amberlite IRA 96 catalyze the synthesis of MLM from grapeseed oil in solvent-free medium. The highest productions of new TAG are achieved at 40 °C, molar ratio TAG:M of 1:2, after 48 h, with both biocatalysts, with yields varying between 38 and 69%. rROL immobilized in Amberlite IRA96 shows a preference toward caprylic acid while CPL shows no preference toward caprylic or capric acid.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Exploring substrate specificities of a recombinant Rhizopus oryzae lipase in biodiesel synthesis

  • Canet, Albert|||0009-0000-8487-8176
  • Benaiges, M. Dolors|||0000-0002-6840-1981
  • Valero, Francisco|||0000-0003-0429-9620
  • Adlercreutz, Patrick
The alcoholysis of triolein was used to explore the specific features of a recombinant Rhizopus oryzae lipase (rROL) for biodiesel synthesis. For this purpose, different acylglycerols were compared as substrates in lipase-catalysed transesterification. rROL was shown to exhibit a higher specificity towards 1-monoolein than triolein compared to other R. oryzae lipases, being more than 4-fold more specific; in contrast, rROL did not accept 2-monoolein as substrate, concluding that it is highly 1,3-positional specific. Comparing ethanol and methanol as acyl-acceptors, it was observed that the latter caused more lipase inactivation. Regarding alcohols, it was also demonstrated that acyl migration occurred in moderate alcohol concentrations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Synthesis of biodiesel from high FFA alperujo oil catalysed by immobilised lipase

  • Bonet-Ragel, Kírian|||0000-0002-0041-7493
  • Canet, Albert|||0009-0000-8487-8176
  • Benaiges, M. Dolors|||0000-0002-6840-1981
  • Valero, Francisco|||0000-0003-0429-9620
Synthesis of biodiesel was carried out through enzymatic biocatalysis by the transesterification of natural waste olive oil (alperujo oil) using a recombinant 1,3-positional selective Rhizopus oryzae lipase (rROL). The most relevant property of this uncommon substrate is the high content of free fatty acids (FFAs), making it impossible to produce biodiesel through basic catalysis. The synthesis reactions were carried out in a solvent-free media using a covalent immobilisation on a glutaraldehyde-treated polymethacrylate amino-epoxide carrier. Methanol was added by stepwise addition to avoid lipase inactivation. FFAs effects on the kinetics, yields and stability of biocatalysts were studied. It was concluded that the high free fatty acids content allows an increasing on the initial reaction rate and it gives more stability to the immobilised enzyme, demonstrating the efficiency of this new substrate for the biodiesel production.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Biodiesel synthesis in a solvent-free system by recombinant Rhizopus oryzae, comparative study between a stirred tank and a packed-bed batch reactor

  • Canet, Albert|||0009-0000-8487-8176
  • Bonet-Ragel, Kírian|||0000-0002-0041-7493
  • Benaiges, M. Dolors|||0000-0002-6840-1981
  • Valero, Francisco|||0000-0003-0429-9620
A simultaneous synthesis of biodiesel, as fatty acid methyl esters, and monoacylglycerols catalysed by the recombinant Rhizopus oryzae lipase immobilized by adsorption on Relizyme OD/403M is presented. The use of this 1(3)-positional specific lipase prevents the formation of glycerol as a by-product, thus avoiding its drawbacks. The synthesis was carried out in a solvent-free system and it has been studied in two different reactor systems: stirred tank and packed-bed reactor. Stirred tank reactor presented a high-initial reaction rate and achieved a 33.6% yield, which corresponds to a value of 50.4% of the maximum yield that can be achieved with a 1(3)-positional specific lipase. In packed-bed reactor there was a smaller initial reaction rate, but it was achieved a 49.1% yield, which corresponds to a 73.6% of the maximum yield. When a second batch is performed, the yield decreased only 4% when packed-bed reactor is employed whereas a drastic decrease is observed in a stirred tank operation. Therefore, packed-bed reactor showed a best performance and minor damage to the biocatalyst.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enzyme-catalyzed preparation of chenodeoxycholic esters by an immobilized heterologous Rhizopus oryzae lipase

  • Quintana, Paula G.
  • Canet, Albert
  • Marciello, Marzia
  • Valero, Francisco
  • Palomo, José Miguel
  • Baldessari, Alicia
A lipase-catalyzed preparation of ethyl and stearyl esters of chenodeoxycholic acid is described. Stearyl chenodeoxycholate is a new product and both bile acid esters were prepared through an enzymatic approach for the first time. The heterologous Rhizopus oryzae lipase, immobilized on two different supports proved to be an efficient catalyst, even more active than Candida antarctica lipase, in the esterification reaction using a complex substrate such as a bile acid. The immobilization of the enzyme on Octadecyl Sepabeads at pH 7 and 25 °C was the best choice to catalyze the esterification reaction. The influence of various reaction parameters, such as nature of the alcohol, alcohol:substrate ratio, enzyme:substrate ratio, solvent and temperature, was evaluated. Using the response surface methodology and a central composite rotatable design, the conversion of stearyl chenodeoxycholate was optimized by means of the study of the effect of enzyme:substrate ratio and alcohol:substrate ratio. The value 20 for ratios (E/S) and (A/S) was predicted as the optimal value to reach the maximum conversion. However, including economic aspects these ratios can be reduced up to 15. The well-known advantages of biocatalysis and the activity shown by the immobilized heterologous lipase make the reported procedure a convenient way to prepare chenodeoxycholic esters., We thank UBA X010, UBACYT 20020100100304 Universidad de Buenos Aires, PIP 112-200801-00801 Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET) (Argentina) and PICT 2011-00595 Agencia Nacional de Promoción Científica y Tecnológica (Argentina) for partial financial support. We are grateful to Unidad de Microanálisis y Métodos Físicos en Química Orgánica (UMYMFOR) (Consejo Nacional de Investigaciones Científicas y Técnicas-Facultad de Ciencias Exactas y Naturales) for the analytical and spectroscopic determination. AB is a Research Member of CONICET. This work was also supported by the project CTQ2013-42391-R of the Spanish Ministry of Economy and Competitively., Peer Reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Lipase-catalysed transesterification, viewpoint of the mechanism and influence of free fatty acids

  • Canet, Albert|||0009-0000-8487-8176
  • Bonet-Ragel, Kírian|||0000-0002-0041-7493
  • Benaiges, M. Dolors|||0000-0002-6840-1981
  • Valero, Francisco|||0000-0003-0429-9620
A series of lipase-catalysed transesterification experiments were carried out to study the effect of the presence of free fatty acids on synthesis reaction rate and the stability of the biocatalyst, and also to elucidate the underlying mechanism, which remains a subject of debate. Based on the results, the reaction rate and biocatalyst stability increased with increasing content in free fatty acids of the reaction mixture. Also, tests carried out with a mixture of triolein and linoleic acid revealed that the transesterification mechanism is a combination of direct alcoholysis of triacylglycerols and a twostep reaction involving hydrolysis of acylglycerols and further esterification of previously released free fatty acids. The time course of triacylglycerols and diacylglycerols revealed that the enzyme is similarly selective for both types of substrate.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A step forward to improve recombinant protein production in Pichia pastoris, from specific growth rate effect on protein secretion to carbon-starving conditions as advanced strategy

  • Garcia-Ortega, Xavier|||0000-0001-7833-3655
  • Adelantado Vallvé, Núria|||0000-0002-1000-7519
  • Ferrer, Pau|||0000-0002-5287-4127
  • Montesinos Seguí, José Luis|||0000-0001-9941-0832
  • Valero, Francisco|||0000-0003-0429-9620
The recombinant protein production platform based on the GAP promoter and Pichia pastoris as a host has become a very promising system from an industrial point of view. The need for highly productive bioprocesses gives grounds for the optimization of fermentation strategies maximizing yields and/or productivities, which are often associated with cell growth. Coherent with previous studies, a positive effect of high specific growth rate (μ) on the productivity was observed in carbon-limited chemostat cultivations secreting an antibody fragment. Notably, no significant impact of this factor could be observed in the balance intra- and extracellular of the product. Accordingly, fed-batch cultures operating at a constant high μ were conducted. Furthermore, short carbon-starving periods were introduced along the exponential substrate feeding phase. Strikingly, it was observed an important increase of specific production rate (qP) during such short carbon-starving periods in relation to the exponential substrate feeding intervals. Therefore, the application of carbon-starving periods as an innovative operational strategy was proposed, resulting into increments up to 50% of both yields and total production. The implementation of the proposed substrate feeding profiles should be complementary to cell engineering strategies to improve the relation qP vs μ, thereby enhancing the overall bioprocess efficiency.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Biodiesel production from crude Jatropa oil catalyzed by non-conventional immobilized heterologous Rhizopus oryzae and Carica papaya lipases

  • Rodrigues, J.
  • Canet, Albert|||0009-0000-8487-8176
  • Rivera, I.
  • Osório, N. M.
  • Sandoval, Georgina|||0000-0002-9105-0702
  • Valero, Francisco|||0000-0003-0429-9620
  • Ferreira-Dias, S.
The aim of this study was to evaluate the feasibility of biodiesel production by transesterification of Jatropha oil with methanol, catalyzed by non-commercial sn-1,3-regioselective lipases. Using these lipases, fatty acid methyl esters (FAME) and monoacylglycerols are produced, avoiding the formation of glycerol as byproduct. Heterologous Rhizopus oryzae lipase (rROL) immobilized on different synthetic resins and Carica papaya lipase (rCPL) immobilized on Lewatit VP OC 1600 were tested. Reactions were performed at 30°C, with seven stepwise methanol additions. For all biocatalysts, 51-65% FAME (theoretical maximum=67%, w/w) was obtained after 4h transesterification. Stability tests were performed in 8 or 10 successive 4h-batches, either with or without rehydration of the biocatalyst between each two consecutive batches. Activity loss was much faster when biocatalysts were rehydrated. For rROL, half-life times varied from 16 to 579h. rROL on Lewatit VPOC 1600 was more stable than for rCPL on the same support.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The effect of hypoxia on the lipidome of recombinant Pichia pastoris

  • Adelantado Vallvé, Núria|||0000-0002-1000-7519
  • Tarazona, Pablo
  • Grillitsch, Karlheinz
  • Garcia-Ortega, Xavier|||0000-0001-7833-3655
  • Monforte Mercado, Sergi|||0000-0001-9752-5273
  • Valero, Francisco|||0000-0003-0429-9620
  • Feussner, Ivo
  • Daum, Günther
  • Ferrer, Pau|||0000-0002-5287-4127
Cultivation of recombinant Pichia pastoris (Komagataella sp.) under hypoxic conditions has a strong positive effect on specific productivity when the glycolytic GAP promoter is used for recombinant protein expression, mainly due to upregulation of glycolytic conditions. In addition, transcriptomic analyses of hypoxic P. pastoris pointed out important regulation of lipid metabolism and unfolded protein response (UPR). Notably, UPR that plays a role in the regulation of lipid metabolism, amino acid metabolism and protein secretion, was found to be upregulated under hypoxia. To improve our understanding of the interplay between lipid metabolism, UPR and protein secretion, the lipidome of a P. pastoris strain producing an antibody fragment was studied under hypoxic conditions. Furthermore, lipid composition analyses were combined with previously available transcriptomic datasets to further understand the impact of hypoxia on lipid metabolism. Chemostat cultures operated under glucose-limiting conditions under normoxic and hypoxic conditions were analyzed in terms of intra/extracellular product distribution and lipid composition. Integrated analysis of lipidome and transcriptome datasets allowed us to demonstrate an important remodeling of the lipid metabolism under limited oxygen availability. Additionally, cells with reduced amounts of ergosterol through fluconazole treatment were also included in the study to observe the impact on protein secretion and its lipid composition. Our results show that cells adjust their membrane composition in response to oxygen limitation mainly by changing their sterol and sphingolipid composition. Although fluconazole treatment results a different lipidome profile than hypoxia, both conditions result in higher recombinant protein secretion levels. The online version of this article (doi:10.1186/s12934-017-0699-4) contains supplementary material, which is available to authorized users.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Fine-tuning the P. pastoris iMT1026 genome-scale metabolic model for improved prediction of growth on methanol or glycerol as sole carbon sources

  • Tomàs Gamisans, Màrius|||0000-0002-6076-6716
  • Ferrer, Pau|||0000-0002-5287-4127
  • Albiol i Sala, Joan|||0000-0001-5626-429X
The methylotrophic yeast Pichia pastoris (Komagataella spp.) is widely used as cell factory for recombinant protein production. In the past recent years, important breakthroughs in the systems-level quantitative analysis of its physiology have been achieved. This wealth of information has allowed the development of genome-scale metabolic models, which make new approaches possible for host cell and bioprocess engineering. Nevertheless, the predictive accuracy of the previous consensus model required to be upgraded and validated with new experimental data sets for P. pastoris growing on glycerol or methanol as sole carbon sources, two of the most relevant substrates for this cell factory. In this study, we have characterized P. pastoris growing in chemostat cultures using glycerol or methanol as sole carbon sources over a wide range of growth rates, thereby providing physiological data on the effect of growth rate and culture conditions on biomass macromolecular and elemental composition. In addition, these data sets were used to improve the performance of the P. pastoris consensus genomic-scale metabolic model 1026. Thereupon, new experimentally determined bounds, including the representation of biomass composition for these growth conditions, have been incorporated. As a result, here, we present version 3 (v3.0) of the consensus P. pastoris genome-scale metabolic model as an update of the 1026 model. The v3.0 model was validated for growth on glycerol and methanol as sole carbon sources, demonstrating improved prediction capabilities over an extended substrate range including two biotechnologically relevant carbon sources.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Physiological state as transferable operating criterion to improve recombinant protein production in Pichia pastoris through oxygen limitation

  • Garcia-Ortega, Xavier|||0000-0001-7833-3655
  • Valero, Francisco|||0000-0003-0429-9620
  • Montesinos Seguí, José Luis|||0000-0001-9941-0832
BACKGROUND: The yeast Pichia pastoris is widely used as a production platform for secreted recombinant protein. The application of oxygen-limiting conditions leads to an important increase in protein specific productivity driven by the GAP promoter. RESULTS: The physiological and metabolic adaptation of the host to a wide range of oxygen availability has been systematically studied in glucose-limited chemostat cultivations producing an antibody fragment (Fab). A weighty increase of up to 3-fold of the specific Fab production rate (qFab) and Fab yield (YPX) has been achieved for the optimal conditions. Besides the remarkable increase on both Fab yield and productivity, as a consequence of the metabolic shift from respiratory to respiro-fermentative pathways, a decrease on biomass yield and generation of several secreted by-products have been observed. CONCLUSION: The accurate system characterization achieved throughout the bioprocess specific rates and the monitoring of cell physiology allowed the determination of the optimal conditions to enhance bioprocess efficiency. This work also presents a versatile approach based on the physiological state of the yeast that can be used to implement the desired oxygen-limiting conditions to fermentations set-ups with different oxygen transfer capacities, alternative operating modes, and even for the production of other proteins of interest.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enzyme-catalyzed production of biodiesel as alternative to chemical-catalyzed processes, advantages and constraints

  • Sandoval, Georgina|||0000-0002-9105-0702
  • Casas-Godoy, Leticia
  • Bonet-Ragel, Kírian|||0000-0002-0041-7493
  • Rodrigues, Joana
  • Ferreira-Dias, Suzana
  • Valero, Francisco|||0000-0003-0429-9620
Background: Biodiesel represents an interesting alternative to fossil fuels. Traditionally the standard method for biodiesel production from oils is alkaline-catalyzed transesterification. Chemical catalysis can be replaced by enzymatic catalysis using lipases (EC 3.1.1.3, triacylglycerol acyl hydrolases), obtained from plants, animals or microorganisms. Enzymatic catalysis has important advantages compared to chemical catalysis, as lower energy consumption and undesirable side-reactions do not occur originating pure compounds. However, some problems should be overcome to achieve a real alternative to chemical catalysis, such as the prize, the stability, and the reutilization of the biocatalyst. -Results: The review consists of an update of the state of the art of enzymatic biodiesel production, including legislation, feedstocks, lipases used for biodiesel synthesis, the role of acyl acceptors and strategies to avoid lipase inactivation, the mechanisms proposed for biocatalysis and the enzymatic bioreactors used. In addition, the economics of the bioprocess is also presented. - Conclusion: Nowadays, there are already some examples of enzymatic processes for biodiesel production implemented at industrial scale and the number of pilot and industrial scale plants has greatly increased in the recent years. In spite of this trend, the chemical catalysis process still remains the most popular on an industrial scale mainly due to the high cost of commercial lipases. Thus, it is necessary to improve the enzymatic technology, increasing the productivity of the bioprocess and reducing the cost of the bioprocess. To attain this goal, it is necessary to act in a multidisciplinary approach of Genetic engineering, Bioprocess engineering, including the production of recombinant lipase in the most adequate cell factory, Enzyme engineering and applied Biocatalysis. It is a fact that the approach to "create" by genetic engineering, a lipase with a high tolerance to methanol, high biocatalyic performance and high resistance to work at higher temperatures and under harsh conditions is not corresponding with the important advances as compared to the other aspects. Also, the use of low cost non-commercial biocatalysts, presenting both high transesterification activity and operational stability, as an alternative to commercial biocatalysts, is a solution to reduce enzymatic biodiesel production costs, making it competitive with chemical processes. The price of biodiesel is highly affected by the market price fluctuation of oil feedstock. Thus the commercial efficiency and competitiveness of biodiesel market needs the development of high-valued product from the FAMEs as rawmaterial, under the concept of a biodiesel refinery. Other approach to minimize the cost of the global process is the production of heterologous lipases, using the crude glycerol obtained in the same biodiesel industry, without high purification, as carbon source. The presence of low methanol concentration and other possible contaminants jointly in the matrix of crude glycerol is not a problem for P. pastoris, one of the most popular cell factories to produce recombinant lipases. In conclusion, enzymatic biodiesel, as a green alternative to chemical biodiesel, has a potential economic growth in the near future.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Effect of acyl-acceptor stepwise addition strategy using alperujo oil as a substrate in enzymatic biodiesel synthesis

  • Bonet-Ragel, Kírian|||0000-0002-0041-7493
  • Canet, Albert|||0009-0000-8487-8176
  • Benaiges, M. Dolors|||0000-0002-6840-1981
  • Valero, Francisco|||0000-0003-0429-9620
Background: using renewable feedstock sources for biodiesel production seems to be a promising strategy and even more so when enzymatic catalysis with lipases are used. However, it is well known that these enzymes could be inactivated by reaction conditions such as temperature or alcohol concentration. In this work, the effect of temperature and initial water activity (aw) value on immobilised recombinant Rhizopus oryzae lipase (rROL) were studied. Methanolysis and ethanolysis reactions using alperujo oil with three different stepwise addition strategies were employed. - Results: recombinant 1,3-positional selective rROL covalently immobilised on polymethacrylate amino-epoxy activated support showed maximum initial reaction rate at low aw value (0.093). It was found that 30 °C was the optimal temperature in terms of biocatalyst stability during transesterification reactions. Adding alcohol at once, ethanol was clearly a better acyl-acceptor in terms of stability than methanol. Productivity was found to be 2-fold higher when five pulses of ethanol were used instead of methanol. - Conclusions: alperujo oil has great potential as a low cost feedstock for biodiesel production through enzymatic catalysis using a nearly semi-continuous alcohol addition strategy.
Dipòsit Digital de Documents de la UAB
Research data Set de datos (Dataset)

Dataset from Redox engineering by ectopic overexpression of NADH kinase in recombinant Pichia pastoris (Komagataella phaffii) Study

  • Tomàs Gamisans, Màrius|||0000-0002-6076-6716
  • Monforte Mercado, Sergi|||0000-0001-9752-5273
  • Ferrer, Pau|||0000-0002-5287-4127
  • Albiol i Sala, Joan|||0000-0001-5626-429X
Dataset corresponding to the NAD kinase redox engineering study in P.pastoris referenced below. Includes cultivation experimental data, droplet digital PCR data and computer simulation results in different files in Microsoft Excel 2013 Format.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Glycerol metabolism of Pichia pastoris (Komagataella spp.) characterised by 13 C-based metabolic flux analysis

  • Tomàs Gamisans, Màrius|||0000-0002-6076-6716
  • Ødum, Anders Sebastian Rosenkrans
  • Workman, Mhairi
  • Ferrer, Pau|||0000-0002-5287-4127
  • Albiol i Sala, Joan|||0000-0001-5626-429X
Metabolic flux analysis based on 13 C-derived constraints has proved to be a powerful method for quantitative physiological characterisation of one of the most extensively used microbial cell factory platforms, Pichia pastoris (syn. Komagataella spp.). Nonetheless, the reduced number of carbon atoms and the symmetry of the glycerol molecule has hampered the comprehensive determination of metabolic fluxes when used as the labelled C-source. Moreover, metabolic models typically used for 13 C-based flux balance analysis may be incomplete or misrepresent the actual metabolic network. To circumvent these limitations, we reduced the genome-scale metabolic model iMT1026-v3.0 into a core model and used it for the iterative fitting of metabolic fluxes to the measured mass isotope distribution of proteinogenic amino acids obtained after fractional 13 C labelling of cells with [1,3- 13 C]-glycerol. This workflow allows reliable estimates to be obtained for in vivo fluxes in P. pastoris cells growing on glycerol as sole carbon source, as well as revising previous assumptions concerning its metabolic operation, such as alternative metabolic branches, calculation of energetic parameters and proposed specific cofactor utilisation.