Skip to main content

APLICABILIDAD TECNOLOGICA DE ENZIMAS LACASA EN LA PRODUCCION DE ETANOL LIGNOCELULOSICO

CTQ2013-47158-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre INSTITUTO NACIONAL DE INVESTIGACIÓN Y TECNOLOGÍA AGRARIA Y ALIMENTARIA - CSIC

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Screening of eucalyptus wood endophytes for laccase activity

  • Fillat, Ursula
  • Martín-Sampedro, Raquel
  • Macaya-Sanz, David
  • Martín, J. A.
  • Ibarra, David
  • Martínez, María Jesús
  • Eugenio, María E.
36 p.-5 fig.-1 tab., New lignin-degrading microorganisms and their enzymes can contribute to more efficient and environmentally sound use of lignocellulosic biomass in future biorefineries. In view ofthis, 127 endophytic fungi were isolated from eucalyptus trees. Strains were tested for their ability to produce ligninolytic enzymes in agar-plate medium containing ABTS, and 21 showed positive ABTS-oxidation. Positive strains in liquid medium confirmed that five produced laccase but no peroxidase activity. These strains were identified as Hormonema sp. and Pringsheimia smilacis, of the family Dothioraceae, Ulocladium sp. (Pleosporaceae) and Neofusicoccum luteum and Neofusicoccum australe (Botryosphaeriaceae). Laccase production by fungi of the family Dothioraceae is described here for the first time.To increase laccase production from these fungi, copper sulphate and ethanol were assayed as inducers. An increase in laccase activity of 85% was found for Hormonema sp. and N. luteum and 95% for N. australe. No increase was obtained for P. smilacis. A maximum temperature of 40 ◦C is recommended for possible biotechnological applications with these four strains at pH 2 for N. luteum and N. australe, pH 4 for Hormonema sp. and pH 4–5 for P. smilacis., The authors wish to thank the Spanish Ministry of Economy and Competitiveness (MINECO) for funding this study via Projects CTQ 2011-28503-C02-01, CTQ2011-28503-C02-02 and CTQ2013- 47158-R and Programme PTA 2011-4857-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assessing cellulose nanofiber production from olive tree pruning residue

  • Fillat, Ursula
  • Martín-Sampedro, Raquel
  • Ibarra, David
  • Ruiz-Hitzky, Eduardo
  • Valencia, Concepción
  • Sarrión, A.
  • Castro, Elena
  • Eugenio, María E.
  • Wicklein, Bernd
Pruning operation in olive trees generates a large amount of biomass that is normally burned causing severe environmental concern. Therefore, the transformation of this agricultural residue into value-added products is imperative but still remains as a technological challenge. In this study, olive tree pruning (OTP) residue is evaluated for the first time to produce cellulose nanofibers (CNF). The OTP bleached pulp was treated by TEMPO-mediated oxidation and subsequent defibrillation in a microfluidizer. The resulting CNF was characterized and compared to CNF obtained from a commercial bleached eucalyptus kraft pulp using the same chemi-mechanical procedure. CNF from OTP showed higher carboxylate content but lower fibrillation yield and optical transmittance as compared to eucalyptus CNF. Finally, the visco-elastic gel obtained from OTP was stronger than that produced from eucalyptus. Therefore, the properties of CNF from OTP made this nanomaterial suitable for several applications. CNF from OTP showed higher carboxylate content as compared to eucalyptus CNF (1038 vs. 778 μmol/g) but lower fibrillation yield (48% vs. 96%) and optical transmittance. Finally, the visco-elastic gel obtained from OTP was stronger than that produced from eucalyptus. Therefore, the properties of CNF from OTP made this nanomaterial suitable for several applications., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) via Projects CTQ2013-47158-R, RTA2015-00051-00-00, MAT2015-71117-R and Programme PTA2014-09248-I. BW acknowledges an IJCI contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Characterization of lignins from Populus alba L. generated as by-products in different transformation processes Kraft pulping, organosolv and acid hydrolysis

  • Martín-Sampedro, Raquel
  • Santos, José I.
  • Fillat, Ursula
  • Eugenio, María E.
  • Ibarra, David
  • Wicklein, Bernd
The complexity and heterogeneity of lignin requires a detailed understanding in order to decide about more efficient lignin valorization approaches. This study deals with the characterization of lignins from Populus alba L. generated as by-products in different transformation processes: kraft pulping, organosolv and dilute acid hydrolysis. In addition to the composition, the chemical and structural features of the different lignins were investigated by Fourier Transform infrared spectroscopy (FTIR), solid-state 13C nuclear magnetic resonance (13C NMR), two-dimensional nuclear magnetic spectrometry (2D NMR), size exclusion chromatography (SEC), and thermal analysis. Organosolv lignin showed noticeably different characteristics compared to kraft and acid hydrolysis lignins; higher molar mass, higher amount of side-chain linkages (mainly aryl-β ether and resinol) together with lower phenolic content. On the contrary, kraft and acid hydrolysis lignins presented an extensive elimination of lateral chains and therefore a higher phenolic content, which suggests a much stronger lignin depolymerization (lower molar mass) during these processes. Moreover, thermal analysis results revealed that the thermal stability of kraft and acid hydrolysis lignins was higher than that of organosolv lignin, especially in the case of acid hydrolysis lignin. According to all these characteristics, several valorization pathways for studied lignin are discussed., The authors wish to thank the MINECO for funding this study via Project MAT2015-71117-R, CTQ2013-47158-R and RTA2015-00051-00-00. BW acknowledges an IJCI contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Laccases as a potential tool for the efficient conversion of lignocellulosic biomass: A review

  • Fillat, Ursula
  • Ibarra, David
  • Eugenio, María E.
  • Moreno, Antonio
  • Tomás-Pejó, E.
  • Martín-Sampedro, Raquel
30 Pág., The continuous increase in the world energy and chemicals demand requires the development of sustainable alternatives to non-renewable sources of energy. Biomass facilities and biorefineries represent interesting options to gradually replace the present industry based on fossil fuels. Lignocellulose is the most promising feedstock to be used in biorefineries. From a sugar platform perspective, a wide range of fuels and chemicals can be obtained via microbial fermentation processes, being ethanol the most significant lignocellulose-derived fuel. Before fermentation, lignocellulose must be pretreated to overcome its inherent recalcitrant structure and obtain the fermentable sugars. Usually, harsh conditions are required for pretreatment of lignocellulose, producing biomass degradation and releasing different compounds that are inhibitors of the hydrolytic enzymes and fermenting microorganisms. Moreover, the lignin polymer that remains in pretreated materials also affects biomass conversion by limiting the enzymatic hydrolysis. The use of laccases has been considered as a very powerful tool for delignification and detoxification of pretreated lignocellulosic materials, boosting subsequent saccharification and fermentation processes. This review compiles the latest studies about the application of laccases as useful and environmentally friendly delignification and detoxification technology, highlighting the main challenges and possible ways to make possible the integration of these enzymes in future lignocellulose-based industries., Authors wish to thank Spanish Ministry of Economy and Competitiveness (MINECO) for funding this study via Projects CTQ2013-47158-R and LIGNOYEAST (ENE2014-315 54912-R). Antonio D. Moreno acknowledges the MINECO and the specific “Juan de la Cierva” Subprogramme for contract FJCI-2014-2238, Peer reviewed