Skip to main content

TECNOLOGIAS INNOVADORAS PARA LA MEJORA DE BIOGAS: DESDE LA INVESTIGACION BASICA A LA EVALUACION DE TECNOLOGIAS

CTQ2014-53718-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT DE GIRONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 29
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sewage biogas efficient purification by means of lignocellulosic waste-based activated carbons

  • Santos-Clotas, Eric
  • Cabrera-Codony, Alba
  • Ruiz Bobes, Begoña
  • Fuente Alonso, Enrique
  • Martín, María J.
The present paper evaluates the efficiency of sustainable activated carbons obtained from the valorization of lignocellulosic waste in removing siloxanes and volatile organic compounds for the purification of anaerobic digester biogas. Pyrolized and non-pyrolized lignocellulosic residues generated in food and wood industries were used as precursor materials to obtain experimental adsorbents by a chemical activation process using several activating agents. The highest porosity was obtained by non-pyrolized residue activated by K2CO3 at 900 °C. The performance of the experimental materials was compared with that of commercial activated carbons in gas adsorption tests of siloxanes (octamethylcyclotetrasiloxane and hexamethyldisiloxane) and volatile organic compounds (toluene and limonene). The waste-based activated carbons developed in this work proved to be more efficient for the removal of both siloxanes and VOCs than the commercial samples in most of the conditions tested. Adsorption capacities correlated with porosity, while the more relevant pore size depends on the adsorbate., This work was funded by MINECO – Spain (CTQ2014-53718-R) co-funded by FEDER and University of Girona. Eric Santos-Clotas thanks Universitat de Girona for his predoctoral grant (IFUdG-2015/51). Alba Cabrera-Codony acknowledges support from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia (TECSPR16-1-0045). LEQUIA has been recognized as consolidated research group by the Catalan Government (2017-SGR-1552)., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Incubation at 25°C prevents acid crash and enhances alcohol production in Clostridium carboxidivorans P7

  • Ramió Pujol, Sara
  • Ganigué Pagès, Ramon
  • Bañeras Vives, Lluís
  • Colprim Galceran, Jesús
Incubation of carboxydotrophs at 37. °C provides optimal conditions for their growth. However, a fast accumulation of organic acids, specifically acetate, during the exponential growth phase may result in low alcohol production and substrate consumption due to a phenomenon known as "acid crash". The present work investigates growth and productivity of Clostridium carboxidivorans P7 at two incubation temperatures. At 37. °C the culture was not able to override the "acid crash", resulting in low ethanol titers (1.56. mM). On the other hand, lower metabolic rates at 25. °C enhanced ethanol and butanol production (32.1 and 14.5. mM, respectively). Moreover, at low temperatures, hexanol and caproic acid were also produced at significant concentrations, 8.21 and 9.02. mM respectively, among the highest values reported for P7. Our results demonstrate that production of biofuels with longer carbon chains molecules may be enhanced incubating syngas-fermenting acetogenic bacteria at sub-optimal temperatures, The authors would like to thank the Generalitat de Catalunya (2013 FI-DGR) and Spanish Ministry (CTQ2014-53718-R and CTM2013-43454-R) for their financial support in this study. LEQUIA and IEA are recognized as consolidated research groups by the Generalitat de Catalunya (2014-SGR-1168 and 2014-SGR-2016). R.G. gratefully acknowledges support from Beatriu de Pinos fellowship (BP-2011-B) and FP7 Marie Curie Career Integration Grants (PCIG13-GA-2013-618593)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

[NiFe]-hydrogenases are constitutively expressed in an enriched Methanobacterium sp. population during electromethanogenesis

  • Perona Vico, Elisabet
  • Blasco Gómez, Ramiro
  • Colprim Galceran, Jesús
  • Puig Broch, Sebastià
  • Bañeras Vives, Lluís
Electromethanogenesis is the bioreduction of carbon dioxide (CO2) to methane (CH4) utilizing an electrode as electron donor. Some studies have reported the active participation of Methanobacterium sp. in electron capturing, although no conclusive results are available. In this study, we aimed at determining short-time changes in the expression levels of [NiFe]-hydrogenases (Eha, Ehb and Mvh), heterodisulfide reductase (Hdr), coenzyme F420-reducing [NiFe]-hydrogenase (Frh), and hydrogenase maturation protein (HypD), according to the electron flow in independently connected carbon cloth cathodes poised at– 800 mV vs. standard hydrogen electrode (SHE). Amplicon massive sequencing of cathode biofilm confirmed the presence of an enriched Methanobacterium sp. population (>70% of sequence reads), which remained in an active state (78% of cDNA reads), tagging this archaeon as the main methane producer in the system. Quantitative RT-PCR determinations of ehaB, ehbL, mvhA, hdrA, frhA, and hypD genes resulted in only slight (up to 1.5 fold) changes for four out of six genes analyzed when cells were exposed to open (disconnected) or closed (connected) electric circuit events. The presented results suggested that suspected mechanisms for electron capturing were not regulated at the transcriptional level in Methanobacterium sp. for short time exposures of the cells to connected-disconnected circuits. Additional tests are needed in order to confirm proteins that participate in electron capturing in Methanobacterium sp, This work was funded by Spanish Government (MINECO, CTQ2014-53718-R) and the Universitat de Girona (MPCUdG2016/139 and MCPUdG2016/121). Sebastià Puig is a Serra Hunter Fellow (UdG-AG-575). Ramiro Blasco-Gómez is grateful for the Research Personnel Training (FPI) grant (BES-2015-074229). Elisabet Perona-Vico received a Research Training grant from the University of Girona (IFUdG2018/52). LEQUiA and IEA have been recognized as consolidated research groups by the Generalitat de Catalunya (2017SGR-1552, and 2017SGR-548)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Microbial fuel cell technology as a downstream process of a membrane bioreactor for sludge reduction

  • Borea, Laura
  • Puig Broch, Sebastià
  • Monclús Sales, Hèctor
  • Naddeo, Vincenzo
  • Colprim Galceran, Jesús
  • Belgiorno, Vincenzo
Recently, microbial fuel cells (MFCs) have been integrated with membrane bioreactors (MBRs), either in an internal or an external configuration, for wastewater treatment and energy recovery. In an external configuration, MFCs could be applied for an efficient sludge reduction since they can simultaneously address energy issue and environmental concerns associated with sludge treatment. In the present study, a potentiostatic controlled microbial fuel cell (MFC) was fed with activated sludge from a membrane bioreactor (MBR) at different total suspended solid (TSS) concentrations (1–10 gTSS L −1 ) in order to assess the electrochemical response of the system and the impact of the bioelectrochemical treatment on sludge characteristics and membrane fouling parameters. The MFC showed COD removals 30% higher than the control test and a reduction of volatile suspended solids (VSS) up to 43% with concomitant production of energy (maximum current density of 2.0 A m −2 ). The electricity production increased with the increase of TSS content. In both MFC and the control test, an increase of soluble microbial products (SMP) ratio in terms of proteins and carbohydrates (SMPp/SMPc) and an average 50% increase of sludge hydrophobicity were observed. This could limit membrane fouling in the case that the sludge is recirculated to the MBR. The electrochemical characterization indicated that both, acetate and sludge oxidation took place at a similar formal potential of −0.2 V vs. SHE indicating that both used the same electron transfer mechanism. Hence, this study shows that a MFC could oxidize, reduce and stabilise MBR sludge producing electricity and affecting membrane fouling parameters, The authors would like to thank the Spanish Ministry (CTQ2014-53718-R and CTM2015-71982-REDT) and the University of Girona (MPCUdG2016/137) for their financial support. LEQUIA has been recognised as consolidated research groups by the Catalan Government (2014-SGR-1168)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Selection of industrial (food, drink and milk sector) wastewater treatment technologies: a multi-criteria assessment

  • Castillo Llorens, Alba
  • Vall, P.
  • Garrido Baserba, Manel
  • Comas Matas, Joaquim
  • Poch, Manuel
Nowadays, most industries are required by law to treat their wastewater, but the selection of the most appropriate wastewater treatment technologies involves a complex decision making process. Environmental decision support systems can be useful to reduce the time needed to make decisions, to improve the consistency and quality of the decisions and to provide direct access to experience, expertise and human-kind reasoning. This study aims to obtain an environmental decision support system to select the most suitable alternative for industrial wastewater treatment in the food, drink and milk sector. The process developed is described, and a set of case studies showing the capabilities of the tool is presented in order to validate the system procedure, This work was partially supported by Doctorat Industrial 2013-DI-038 (AGAUR and SUEZ) and by the Spanish Ministry of Economyand Competitiveness (CTQ2014-53718-R)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Deciphering the electron transfer mechanisms for biogas upgrading to biomethane within a mixed culture biocathode

  • Batlle Vilanova, Pau
  • Puig Broch, Sebastià
  • González Olmos, Rafael
  • Vilajeliu Pons, Anna
  • Balaguer i Condom, Maria Dolors
  • Colprim Galceran, Jesús
Biogas upgrading is an expanding field dealing with the increase in methane content of the biogas to produce biomethane. Biomethane has a high calorific content and can be used as a vehicle fuel or directly injected into the gas grid. Bioelectrochemical systems (BES) could become an alternative for biogas upgrading, by which the yield of the process in terms of carbon utilisation could be increased. The simulated effluent from a water scrubbing-like unit was used to feed a BES. The BES was operated with the biocathode poised at −800 mV vs. SHE to drive the reduction of the CO2 fraction of the biogas into methane. The BES was operated in batch mode to characterise methane production and under continuous flow to demonstrate its long-term viability. The maximum methane production rate obtained during batch tests was 5.12 ± 0.16 mmol m−2 per day with a coulombic efficiency (CE) of 75.3 ± 5.2%. The production rate increased to 15.35 mmol m−2 per day (CE of 68.9 ± 0.8%) during the continuous operation. Microbial community analyses and cyclic voltammograms showed that the main mechanism for methane production in the biocathode was hydrogenotrophic methanogenesis by Methanobacterium sp., and that electromethanogenesis occurred to a minor extent. The presence of other microorganisms in the biocathode, such as Methylocystis sp. revealed the presence of side reactions, such as oxygen diffusion from the anode compartment, which decreased the efficiency of the BES. The results of the present work offer the first experimental report on the application of BES in the field of biogas upgrading processes, This research was nancially supported by the Spanish Government (CTQ 2014-53718-R). P. B-V. and A. V-P. were supported by a project grant from the Catalan Government (2014 FIB1 00119 and 2014 FI-B 00093). LEQUIA has been recognised as consolidated research group by the Catalan Government with code 2014-SGR-1168. Authors acknowledge the collaboration of Lluis Baneras from the Group of Molecular Microbial Ecology (University of Girona), who helped with the microbial analyses
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Long-term assessment of the six-stacked scaled-up MFCs treating swine manure with different electrode materials

  • Vilajeliu Pons, Anna
  • Puig Broch, Sebastià
  • Salcedo Dávila, Inmaculada
  • Balaguer i Condom, Maria Dolors
  • Colprim Galceran, Jesús
Microbial fuel cells (MFCs) technology is a bio-approach to remove organic matter and nitrogen from wastewater with concomitant production of renewable electricity. Nowadays, it exists a clear interest in moving MFCs towards application. This study aimed to demonstrate MFCs technology feasibility treating swine manure. A couple of 6-stacked MFCs presenting a total volume of 115 L were designed and operated to treat swine manure at 50 L·d-1 for more than 6 months. Two different electrodes were tested, one for each stacked MFC: Granular graphite (GG-MFC) and stainless steel mesh (SS-MFC). Organic matter was oxidised in the anode compartments, ammonium was oxidized to nitrate in an external aerated reactor, and nitrate was reduced to dinitrogen gas in the biocathodes. GG and SS-MFCs reached similar organic matter and nitrogen removal rates (1.9±0.3 kg COD m-3 d-1; 0.35±0.02 kg N m-3 d-1) with power densities between 2-4 Wm-3, being the central units the most electroactive. However, the GG-MFC performance declined overtime due to electrode crushing and the clogging of granular graphite which reduced its applicability in comparison with stainless steel. The application of stacked SS-MFC with mixed electric circuit is a feasible strategy to maintain or even improve treatment efficiencies and power densities when scaling-up MFCs, This research was financially supported by the 532 Company Abengoa Water within the TEcoAgua project (CIEN-20091028), the Spanish 533 Government (CTQ2014-53718-R) and the Catalan Government (2014 FI-B 00093)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

The core microbiome is responsible for volatile silicon and organic compounds degradation during anoxic lab scale biotrickling filter performance

  • Boada Cahueñas, Ellana
  • Santos Clotas, Eric
  • Cabrera-Codony, Alba
  • Martín, María José
  • Bañeras Vives, Lluís
Volatile silicon compounds present in the biogas of anaerobic digesters can cause severe problems in the energy recovery systems, inducing costly damages. Herein, the microbial community of a lab-scale biotrickling filter (BTF) was studied while testing its biodegradation capacity on octamethylcyclotetrasiloxane (D4) and decamethylcyclopentasiloxane (D5), in the presence of toluene, limonene and hexane. The reactor performance was tested at different empty bed residence times (EBRT) and packing materials. Community structure was analysed by bar-coded amplicon sequencing of the 16S rRNA gene. Microbial diversity and richness were higher in the inoculum and progressively decreased during BTF operation (Simpson's diversity index changing from 0.98–0.90 and Richness from 900 to 200 OTUs). Minimum diversity was found when reactor was operated at relatively low EBRT (7.3 min) using a multicomponent feed. The core community was composed of 36 OTUs (accounting for 55% of total sequences). Packing material played a key role in the community structure. Betaproteobacteriales were dominant in the presence of lava rock and were partially substituted by Corynebacteriales and Rhizobiales when activated carbon was added to the BTF. Despite these changes, a stable and resilient core microbiome was selected defining a set of potentially degrading bacteria for siloxane bioremoval as a complementary alternative to non-regenerative adsorption onto activated carbon, This work was funded by MINECO – Spain (CTQ2014-53718R) co-funded by FEDER and University of Girona. E. B. thanks SENESCYT – Ecuador for her predoctoral grant. IEA and LEQUIA have been recognized as consolidated research groups by the Catalan Government (2017SGR-548 and 2017SGR-1552, respectively). E.S.C. thanks Universitat de Girona for his predoctoral grant (IFUdG-2015/51). The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia (A.Cabrera-Codony TECSPR16-1-0045), Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Employing Microbial Electrochemical Technology-driven electro-Fenton oxidation for the removal of recalcitrant organics from sanitary landfill leachate

  • Hassan, Muhammad
  • Pous Rodríguez, Narcís
  • Xie, Bing
  • Colprim Galceran, Jesús
  • Balaguer i Condom, Maria Dolors
  • Puig Broch, Sebastià
The feasibility of employing Microbial Electrochemical Technology (MET)-driven electro-Fenton oxidation was evaluated as a post-treatment of an anammox system treating sanitary landfill leachate. Two different MET configuration systems were operated using effluent from partial nitrification-anammox reactor treating mature leachate. In spite of the low organic matter biodegradability of the anammox's effluent (2401 ± 562 mg COD L −1 ; 237 ± 57 mg BOD 5 L −1 ), the technology was capable to reach COD removal rates of 1077–1244 mg L −1 d −1 with concomitant renewable electricity production (43.5 ± 2.1 Am −3 N CC ). The operation in continuous mode versus batch mode reinforced the removal capacity of the technology. The recirculation of acidic catholyte into anode chamber hindered the anodic efficiency due to pH stress on anodic electricigens. The obtained results demonstrated that the integrated system is a potentially applicable process to deal with bio-recalcitrant compounds present in mature landfill leachate, The authors would like to thank the Spanish Ministry (CTQ2014-53718-R) and the University of Girona (MPCUdG2016/137) for their financial support. LEQUIA has been recognized as consolidated research group by the Catalan Government (2014-SGR-1168)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

External resistances applied to MFC affect core microbiome and swine manure treatment efficiencies

  • Vilajeliu Pons, Anna
  • Bañeras Vives, Lluís
  • Puig Broch, Sebastià
  • Molognoni, Daniele
  • Vilà-Rovira, Albert
  • Hernández del Amo, Elena
  • Balaguer i Condom, Maria Dolors
  • Colprim Galceran, Jesús
Microbial fuel cells (MFCs) can be designed to combine water treatment with concomitant electricity production. Animal manure treatment has been poorly explored using MFCs, and its implementation at full-scale primarily relies on the bacterial distribution and activity within the treatment cell. This study reports the bacterial community changes at four positions within the anode of two almost identically operated MFCs fed swine manure. Changes in the microbiome structure are described according to the MFC fluid dynamics and the application of a maximum power point tracking system (MPPT) compared to a fixed resistance system (Ref-MFC). Both external resistance and cell hydrodynamics are thought to heavily influence MFC performance. The microbiome was characterised both quantitatively (qPCR) and qualitatively (454-pyrosequencing) by targeting bacterial 16S rRNA genes. The diversity of the microbial community in the MFC biofilm was reduced and differed from the influent swine manure. The adopted electric condition (MPPT vs fixed resistance) was more relevant than the fluid dynamics in shaping the MFC microbiome. MPPT control positively affected bacterial abundance and promoted the selection of putatively exoelectrogenic bacteria in the MFC core microbiome (Sedimentibacter sp. and gammaproteobacteria). These differences in the microbiome may be responsible for the two-fold increase in power production achieved by the MPPT-MFC compared to the Ref-MFC, This research was financially supported by the Spanish Government (CTQ2014-53718-R) and the Catalan Government (2014 FI-B 00093)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Steering bio-electro recycling of carbon dioxide towards target compounds through novel inoculation and feeding strategies

  • Blasco Gómez, Ramiro
  • Romans Casas, Meritxell
  • Bolognesi, Silvia
  • Perona Vico, Elisabet
  • Colprim Galceran, Jesús
  • Bañeras Vives, Lluís
  • Balaguer i Condom, Maria Dolors
  • Puig Broch, Sebastià
New strategies in inoculation and operation of bioelectrochemical systems were used to advance in the steering of bio-electro carbon dioxide (CO2) recycling towards chemical compounds. First, the preparation of microbe coated biocathodes ex-situ with putative electroactive species with CO2 as sole carbon source was assayed. Second, CO2 feeding strategies for the operation of BES systems were explored to ensure enough reducing power during batch mode operation. The impact on the proposed changes on the product portfolio and production yields was assessed. The initial enrichment of a putative electroactive community on bare electrode surfaces was proven to be successful and led to a shortening of the start-up period of the system from days to hours. Moreover, the establishment of a new feeding procedure to favor the presence of elevated reducing power availability for cells triggered the production of longer carbon chain carboxylates (max. 0.99 gbutyrate m-2electrode d-1) and alcohols (max. 0.83 gethanol m-2electrode d-1) at early stages of experiment. This work complements the recent knowledge on the control of bioelectrochemical processes by the establishment of strategies to obtain target added-value compounds from CO2, R.B-G. was supported by a grant from the Spanish Ministry of Economy and Competitiveness (MINECO) (FPI grant BES-2015-074229 within the research project CTQ2014-53718R). E. P.-V. is grateful for the Research Training grant from the University of Girona (IFUdG2018/52). S.P. is a Serra Hunter Fellow (UdG-AG-575) and acknowledges the funding from the ICREA Academia award. This research was funded by the Agency for Business Competitiveness of the Government of Catalonia (ACCIÓ; COMRDI16-1-0061) and the Spanish Ministry of Science (RTI2018-098360-B-I00). LEQUIA and EcoAqua groups have been recognized as consolidated research groups by the Catalan Government (2017SGR-1552 and 2017SGR-548)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Coupling adsorption with biotechnologies for siloxane abatement from biogas

  • Santos Clotas, Eric
  • Cabrera-Codony, Alba
  • Martín, María José
Biogas generated during anaerobic digestion in sewage plants contains a wide spectrum of trace impurities. Siloxanes are the most hazardous pollutants and its removal is mandatory for most energy applications. The most widely used technology is adsorption onto activated carbon (AC) despite the high operating costs. In this context, the use of biotechnologies to abate biogas pollutants could assist extending the lifetime of the AC filters. The present work evaluated at lab-scale the potentialities of implementing a biotrickling filter (BTF) before the adsorption technology. Moreover, the use of ACs with different characteristics and price was evaluated considering their selectivity towards siloxane over volatile organic compounds (VOCs). The pre-treatment of biogas in a BTF capable of eliminating VOCs like limonene increased significantly the adsorbent performance, reaching 690 m3 L−1 of biogas treated per bed volume by a phosphoric-activated carbon, a six-fold increase in the performance of currently used materials in adsorption treatment. In terms of cost, a steam-activated coal-based with a major mesoporosity contribution implied the lowest operating costs reaching 2.3 (1000 m3treated)−1. Coupling BTF with adsorption into this same AC resulted in lower annual costs than adsorption alone due to the frequent replacements required when biogas was not pre-polished, The research leading to these results has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia. This work was also funded by MINECO – Spain (CTQ2014-53718-R) co-founded by FEDER and the University of Girona (MPCUdG2016/137). E.S-C. thanks Universitat de Girona for his predoctoral grants (IFUdG_2015_51). LEQUIA has been recognized as consolidated research group by the Catalan Government (2017-SGR-1552), 9
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Tracking bio-hydrogen-mediated production of commodity chemicals from carbon dioxide and renewable electricity

  • Puig Broch, Sebastià
  • Ganigué Pagès, Ramon
  • Batlle Vilanova, Pau
  • Balaguer i Condom, Maria Dolors
  • Bañeras Vives, Lluís
  • Colprim Galceran, Jesús
This study reveals that reduction of carbon dioxide (CO2) to commodity chemicals can be functionally compartmentalized in bioelectrochemical systems. In the present example, a syntrophic consortium composed by H2-producers (Rhodobacter sp.) in the biofilm is combined with carboxidotrophic Clostridium species, mainly found in the bulk liquid. The performance of these H2-mediated electricity-driven systems could be tracked by the activity of a biological H2sensory protein identified at cathode potentials between −0.2 V and −0.3 V vs SHE. This seems to point out that such signal is not strain specific, but could be detected in any organism containing hydrogenases. Thus, the findings of this work open the door to the development of a biosensor application or soft sensors for monitoring such systems, The authors would like to thank the Spanish Ministry (CTQ2014-53718-R and CTM2013-43454-R) and the University of Girona (MPCUdG2016/137) for theirs financial support. LEQUIA and IEA have been recognised as consolidated research groups by the Catalan Government (2014-SGR-1168, and 2014-SGR-484). R. G. gratefully acknowledges support from Ghent University BOF postdoctoral fellowship (BOF15/PDO/068). P.B-V gratefully acknowledges the Catalan Government for the pre-doctoral grant received (2015FI-B2 00076)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Bio-electro CO2 recycling platform based on two separated steps

  • Romans Casas, Meritxell
  • Blasco Gómez, Ramiro
  • Colprim Galceran, Jesús
  • Balaguer i Condom, Maria Dolors
  • Puig Broch, Sebastià
The present work assessed the alliance of microbial electrochemical technologies (METs) and fermentation in a two-step process for the electro-bioconversion of carbon dioxide (CO2) into elongated chemical building blocks. The electro bio-reduction of CO2 into acetic acid and ethanol (EtOH:HAc) at a 1-to-1 ratio is linked to a subsequent elongation step to produce C4 and C6 compounds. Key operational conditions of each step were assessed. Key parameters considered in the first step were pH, and both hydrogen and CO2 partial pressures. Concerning the second stage, selected parameters were pH, ethanol to acetate ratio, and hydrogen availability. The aim was to steer each stage's performance and to obtain higher value products. Reached EtOH:HAc proportion was over 1:1 when fed with CO2, with H2 availability and at pH around 5.3. Formed product reinforced the follow-up chain elongation processes. The fermentation step got up to C6 compounds at pH 7.0, when fed with CO2 and H2. Outcomes demonstrated that pH was a crucial factor in the overall process. The overall process carbon conversion efficiency was 38% being the CO2 transformation the limiting step. 1 kg of CO2 fed in the system resulted in the production of 0.38 kg of elongated acids (C4-C6). In other words, 1 m3 of CO2 (normal conditions) captured resulted firstly in the production of 0.90 kg CC2 and then, 0.75 kg CC4-C6 are finally acquired. The presented results pave the ground for improving the selectivity during the production of reduced commodity chemicals from CO2 and electricity, The authors acknowledge funding from the Agency for Business Competitiveness of the Government of Catalonia (ACCIO; COMRDI16-1-0061) and the Spanish Ministry of Science (RTI2018-098360-B-I00). M.R-C. is grateful for the support of the Catalan Government (2021 FI_B 00499). R.B-G. is grateful for the FPI Grant BES-2015–074229 in the framework of the project CTQ2014-53718-R given by the Spanish Ministry of Economy and Competitiveness (MINECO). S.P. is a Serra Hunter Fellow (UdG-AG-575) and acknowledges the funding from the ICREA Academia award. LEQUIA (http://www.lequia.udg.edu/) hasbeen recognized as a consolidated research group by the Catalan Government (2017-SGR-1552), Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Biogas purification through membrane bioreactors: Experimental study on siloxane separation and biodegradation

  • Santos Clotas, Eric
  • Cabrera-Codony, Alba
  • Comas Matas, Joaquim
  • Martín, María José
Sewage biogas valorization to different energy applications is hampered by the presence of volatile methyl siloxanes. Despite the high operating costs, adsorption onto activated carbon is the most implemented technology for siloxane removal from biogas. In order to purify biogas sustainably, the current work explores the diffusion of siloxanes (octamethylcyclotetrasiloxane and decamethylcyclopentasiloxane) together with other biogas impurities (limonene, toluene and hexane) through polydimethylsiloxane membranes. Abiotic tests revealed transport efficiencies above 75% towards a clean air stream for most compounds, although the transport of the most hydrophobic pollutants was challenged when water was circulated through the shell side of the membrane. Moreover, the performance of a hollow-fiber membrane bioreactor, inoculated with anerobic active sludge, was evaluated towards biogas purification in anoxic conditions. Toluene and limonene were successfully degraded, hexane's removal efficiency was positively correlated with the residence time, and siloxanes removal was achieved up to 21%. CO2 was detected in the outlet gas as the mineralization product as well as some byproducts from the degradation of limonene and siloxanes. The presence of 1% of O2 in the gas, as a strategy to substitute NO3−, efficiently supported high removal for volatile organic compounds and moderate for siloxanes, which would ultimately reduce the operating costs of the technology, This work was funded by the Spanish Ministry of Science, Innovation and Universities (CTQ2014-53718-R) co-funded by FEDER and University of Girona. Eric Santos-Clotas thanks Universitat de Girona for his predoctoral grant (IFUdG-2015/51). Alba Cabrera-Codony acknowledges support from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement Nº 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia (TECSPR16-1-0045). LEQUIA has been recognized as consolidated research groups by the Catalan Government (2017-SGR-1552 and 2017SGR-548, respectively)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Opportunities for groundwater microbial electro-remediation

  • Pous Rodríguez, Narcís
  • Balaguer i Condom, Maria Dolors
  • Colprim Galceran, Jesús
  • Puig Broch, Sebastià
Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology. Groundwater pollution is a serious worldwide concern. Aromatic compounds, chlorinated hydrocarbons, metals and nutrients among others can be widely found in different aquifers all over the world. However, there is a lack of sustainable technologies able to treat these kinds of compounds. Microbial electro-remediation, by the means of microbial electrochemical technologies (MET), can become a promising alternative in the near future. MET can be applied for groundwater treatment in situ or ex situ, as well as for monitoring the chemical state or the microbiological activity. This document reviews the current knowledge achieved on microbial electro-remediation of groundwater and its applications, This research was financially supported by the Spanish Government (CTQ2014-53718-R and CTM2015-71982-REDT) and the University of Girona (MPCUdG2016/137). LEQUIA has been recognized as a consolidated research group by the Catalan Government with code 2014-SGR-1168
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Quantitative assessment of energy and resource recovery in wastewater treatment plants based on plant-wide simulations

  • Fernández Arévalo, Tamara
  • Lizarralde, I.
  • Fernández-Polanco Fernández de Moreda, Fernando
  • Pérez-Elvira, Sara Isabel
  • Garrido, J. M.
  • Puig Broch, Sebastià
  • Poch, Manuel
  • Grau, P.
  • Ayesa Iturrate, Eduardo
The growing development of technologies and processes for resource treatment and recovery is offering endless possibilities for creating new plant-wide configurations or modifying existing ones. However, the configurations’ complexity, the interrelation between technologies and the influent characteristics turn decision-making into a complex or unobvious process. In this frame, the Plant-Wide Modelling (PWM) library presented in this paper allows a thorough, comprehensive and refined analysis of different plant configurations that are basic aspects in decision-making from an energy and resource recovery perspective. In order to demonstrate the potential of the library and the need to run simulation analyses, this paper carries out a comparative analysis of WWTPs, from a techno-economic point of view. The selected layouts were (1) a conventional WWTP based on a modified version of the Benchmark Simulation Model No. 2, (2) an upgraded or retrofitted WWTP, and (3) a new Wastewater Resource Recovery Facilities (WRRF) concept denominated as C/N/P decoupling WWTP. The study was based on a preliminary analysis of the organic matter and nutrient energy use and recovery options, a comprehensive mass and energy flux distribution analysis in each configuration in order to compare and identify areas for improvement, and a cost analysis of each plant for different influent COD/TN/TP ratios. Analysing the plants from a standpoint of resources and energy utilization, a low utilization of the energy content of the components could be observed in all configurations. In the conventional plant, the COD used to produce biogas was around 29%, the upgraded plant was around 36%, and 34% in the C/N/P decoupling WWTP. With regard to the self-sufficiency of plants, achieving self-sufficiency was not possible in the conventional plant, in the upgraded plant it depended on the influent C/N ratio, and in the C/N/P decoupling WWTP layout self-sufficiency was feasible for almost all influents, especially at high COD concentrations. The plant layouts proposed in this paper are just a sample of the possibilities offered by current technologies. Even so, the library presented here is generic and can be used to construct any other plant layout, provided that a model is available, The authors would like to acknowledge COST Action ES1202: Conceiving Wastewater Treatment in 2020 e “Water2020” and RedNovedar (CTQ2016-81979-REDC). The authors wish to thank Dr. Miquel Rigola from the Laboratory of Chemical and Environmental Engineering (LEQUIA) for his help and suggestions. S. Puig and M. Poch would like to thank the Spanish Ministry (CTQ2014-53718-R) and the University of Girona (MPCUdG2016/137) for their financial support. LEQUIA has been recognised as a consolidated research group by the Catalan Government (2014-SGR-1168)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Influence of iron species on integrated microbial fuel cell and electro-Fenton process treating landfill leachate

  • Hassan, Muhammad
  • Pous Rodríguez, Narcís
  • Xie, Bing
  • Colprim Galceran, Jesús
  • Balaguer i Condom, Maria Dolors
  • Puig Broch, Sebastià
MFC-based bioelectro-Fenton (BEF) system was examined in duplicate to deal with recalcitrant organics of mature landfill leachate pre-treated with partial nitritation-anammox process. The system performance was evaluated at various iron species (iron (II) sulfate and iron (III) chloride) and iron dosages (150, 300 and 500 mg L −1 ) as Fenton catalyst. A simultaneous anolyte and catholyte COD removal efficiency of 71–76% and 77–81% occurred respectively, having glucose substrate (anolyte) and leachate (catholyte). Upon switching the system to 80% and then 100% real leachate as anolyte substrate affected the COD removal efficiency and CE, but no significant effect was noticed in terms of current density. A maximum current density of 1.7 A m −2 was obtained throughout the experiment. Iron concentration of 300 mg L −1 proved to be optimum dose; whereas, iron (II) catalyst showed slightly better efficiency than iron (III). The results demonstrated the potential of an MFC based BEF oxidation as sustainable and efficient route for simultaneous anodic and cathodic pollutant removal coupled with power production, The authors would like to thank the Spanish Ministry (CTQ2014-53718-R and CTM2015-71982-REDT) and the University of Girona (MPCUdG2016/137) for their financial support
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Effect of hydraulic retention time and substrate availability in denitrifying bioelectrochemical systems

  • Pous Rodríguez, Narcís
  • Puig Broch, Sebastià
  • Balaguer i Condom, Maria Dolors
  • Colprim Galceran, Jesús
Denitrifying bioelectrochemical systems (BES) allow safe nitrate treatment in waters with low organic carbon content without chemical requirements and at a competitive cost. However, this technology should move towards scaling-up by improving removal rate capabilities. In this study, a novel tubular design was used to evaluate whether the hydraulic retention time and the influent nitrate concentration influence the nitrate removal rate of denitrifying BES. A nitrate consumption rate of up to 849 g N mNCC−3 d−1 was reached without accumulation of nitrites at a HRT of 28 minutes. Nitrate removal activity was evaluated under different nitrate influent concentrations and under different HRTs. Results suggested preeminence of HRT on modulating the denitrifying activity. Therefore, this study presents an innovative design for nitrate removal using denitrifying BES and it demonstrates that operation at low HRTs increases the nitrate removal rate. It suggests that an appropriate approximation of scaling-up denitrifying BES would be the implementation of compact reactors connected in series operated at low HRTs, This research was financially supported by the Spanish Government (CTQ2014-53718-R and CTM2015-71982-REDT) and the University of Girona (MPCUdG2016/137)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Bidirectional microbial electron transfer: Switching an acetate oxidizing biofilm to nitrate reducing conditions

  • Pous Rodríguez, Narcís
  • Carmona Martínez, Alessandro A.
  • Vilajeliu Pons, Anna
  • Fiset, Erika
  • Bañeras Vives, Lluís
  • Trably, Eric
  • Balaguer i Condom, Maria Dolors
  • Colprim Galceran, Jesús
  • Bernet, Nicolas
  • Puig Broch, Sebastià
Up to date a few electroactive bacteria embedded in biofilms are described to catalyze both anodic and cathodic reactions in bioelectrochemical systems (i.e. bidirectional electron transfer). How these bacteria transfer electrons to or from the electrode is still uncertain. In this study the extracellular electron transfer mechanism of bacteria within an electroactive biofilm was investigated by using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). First, a mature anodic electroactive biofilm was developed from an activated sludge sample (inoculum), acetate as electron donor and a poised electrode (+397. mV vs. SHE). Later, this biofilm was "switched" to biocathodic conditions by feeding it with a medium containing nitrates and poising the electrode at -303. mV vs. SHE. The electrochemical characterization indicated that both, acetate oxidation and nitrate reduction took place at a similar formal potential of -175±05 and -175±34. mV vs. SHE, respectively. The biofilm was predominantly composed by Geobacter sp. at both experimental conditions. Taken together, the results indicated that both processes could be catalyzed by using the same electron conduit, and most likely by the same bacterial consortium. Hence, this study suggests that electroactive bacteria within biofilms could use the same electron transfer conduit for catalyzing anodic and cathodic reaction, This work was supported by the Spanish Government (CTQ2014 SGR-1168,CTQ2014-53718-R). A.A.C.M.was supported by the French National Research Agency (Project:ANR‐10‐BTBR‐02). N.P. was supported by the Catalan Government (2012FI B00941). The authors acknowledge the scientific contribution of Pau Batlle-Vilanova (LEQUIA-UdG)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Anode hydrodynamics in bioelectrochemical systems

  • Vilà-Rovira, Albert
  • Puig Broch, Sebastià
  • Balaguer i Condom, Maria Dolors
  • Colprim Galceran, Jesús
This study assesses the hydrodynamics in the anode compartment of a bioelectrochemical system (BES) when using different electrode materials (graphite rod, granular graphite, stainless steel mesh or graphite plate). For this purpose, computational fluid dynamics (CFDs) modelling was used. Granular graphite or stainless steel mesh allowed a better water flow distribution through the system favouring biomass attachment and consequently, removal efficiency and electricity production. This study provides the necessary mechanistic understanding on how these materials affect the hydrodynamics and substrate distribution behaviour within the bioanodes and electricity produc, This research was nancially supported by the Spanish Government (CTQ2014-53718-R)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Sewage biogas efficient purification by means of lignocellulosic waste-based activated carbons

  • Santos Clotas, Eric
  • Cabrera-Codony, Alba
  • Ruiz, B.
  • Fuente González, Elena de la
  • Martín, María José
The present paper evaluates the efficiency of sustainable activated carbons obtained from the valorization of lignocellulosic waste in removing siloxanes and volatile organic compounds for the purification of anaerobic digester biogas. Pyrolized and non-pyrolized lignocellulosic residues generated in food and wood industries were used as precursor materials to obtain experimental adsorbents by a chemical activation process using several activating agents. The highest porosity was obtained by non-pyrolized residue activated by K2CO3 at 900 °C. The performance of the experimental materials was compared with that of commercial activated carbons in gas adsorption tests of siloxanes (octamethylcyclotetrasiloxane and hexamethyldisiloxane) and volatile organic compounds (toluene and limonene). The waste-based activated carbons developed in this work proved to be more efficient for the removal of both siloxanes and VOCs than the commercial samples in most of the conditions tested. Adsorption capacities correlated with porosity, while the more relevant pore size depends on the adsorbate, This work was funded by MINECO – Spain (CTQ2014-53718-R) co-funded by FEDER and University of Girona. Eric Santos-Clotas thanks Universitat de Girona for his predoctoral grant (IFUdG-2015/51). Alba Cabrera-Codony acknowledges support from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia (TECSPR16- 1-0045). LEQUIA has been recognized as consolidated research group by the Catalan Government (2017-SGR-1552)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Microbial electrosynthesis of butyrate from carbon dioxide: Production and extraction

  • Batlle Vilanova, Pau
  • Ganigué Pagès, Ramon
  • Ramió Pujol, Sara
  • Bañeras Vives, Lluís
  • Jiménez, Gerard
  • Hidalgo Muñoz, Manuela
  • Balaguer i Condom, Maria Dolors
  • Colprim Galceran, Jesús
  • Puig Broch, Sebastià
To date acetate is the main product of microbial electrosynthesis (MES) from carbon dioxide (CO 2 ). In this work a tubular bioelectrochemical system was used to carry out MES and enhance butyrate production over the other organic products. Batch tests were performed at a fixed cathode potential of − 0.8 V vs SHE. The reproducibility of the results according to previous experiments was validated in a preliminary test. According to the literature butyrate production could take place by chain elongation reactions at low pH and high hydrogen partial pressure (p H2 ). During the experiment, CO 2 supply was limited to build up p H2 and trigger the production of compounds with a higher degree of reduction. In test 1 butyrate became the predominant end-product, with a concentration of 59.7 mMC versus 20.3 mMC of acetate, but limitation on CO 2 supply resulted in low product titers. CO 2 limitation was relaxed in test 2 to increase the bioelectrochemical activity but increase p H2 and promote the production of butyrate, what resulted in the production of 87.5 mMC of butyrate and 34.7 mMC of acetate. The consumption of ethanol, and the presence of other products in the biocathode (i.e. caproate) suggested that butyrate production took place through chain elongation reactions, likely driven by Megasphaera sueciensis ( > 39% relative abundance). Extraction and concentration of butyrate was performed by liquid membrane extraction. A concentration phase with 252.4 mMC of butyrate was obtained, increasing also butyrate/acetate ratio to 16.4. The results are promising for further research on expanding the product portfolio of MES, This research was financially supported by the Spanish Ministry of Economy and Competitiveness (CTQ 2014-53718-R) and the University of Girona (MPCUdG2016/137). P. B-V gratefully acknowledges the Catalan Government for the pre-doctoral grant received (2015FI-B2 00076). R.G. gratefully acknowledges support from Ghent University BOF postdoctoral fellowship (BOF15/PDO/068). LEQUIA and EcoAqua have been recognised as consolidated research group by the Catalan Government (Refs. 2014-SGR-1168 and 2014-SGR-484, respectively)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A step forward in the management of multiple wastewater streams by using an ant colony optimization-based method with bounded pheromone

  • Verdaguer Planas, Marta
  • Clara i Lloret, Narcís
  • Monclús Sales, Hèctor
  • Poch, Manuel
Wastewater treatment systems (WTSs) have as an objective to efficiently treat the wastewater flows that they receive. Wastewater treatment plants (WWTP) process optimization is generally based on biological process optimization, which is usually related to the quantity and quality of the WWTP inflows. The inflow contributions sometimes destabilize the biological system due to flow and nutrient load limitations, with a higher impact in small and decentralized systems. Their management is a complex task due to the multiple constituents and different flows, but it should be the first step for a general, optimal and comprehensive optimization. Ant colony optimization (ACO) has demonstrated the ability to solve these complex problems, as metaheuristic methodologies, using an iterative and probabilistic procedure. This work proposes to solve the treatment influent composition by using two ACO algorithms. Both algorithms apply bounded pheromone trails to resolve the failures in the search for an optimal solution limited by inflow constraints. The results present high efficacy in maximizing the total wastewater inflow that fulfils all the constraints and improving the WWTP management with different inflows and constraints, M. Verdaguer, H. Monclús and M. Poch would like to acknowl-edge the funding of MINECO through project CTQ2014-53718-R. LEQUIA has been recognized as a consolidatedresearch group by the Catalan Government with code 2014-SGR-1168. Also LEQUIA would like to thank the University ofGirona (MPCUdG2016/137) for its financial support
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Environmental Decision Support System for Biogas Upgrading to Feasible Fuel

  • Santos Clotas, Eric
  • Cabrera-Codony, Alba
  • Castillo Llorens, Alba
  • Martín, María José
  • Poch, Manuel
  • Monclús Sales, Hèctor
Biogas production is a growing market and the existing conversion technologies require different biogas quality and characteristics. In pursuance of assisting decision-makers in biogas upgrading an environmental decision support system (EDSS) was developed. Since the field is rapidly progressing, this tool is easily updatable with new data from technical and scientific literature through the knowledge acquisition level. By a thorough technology review, the diagnosis level evaluates a wide spectrum of technologies for eliminating siloxanes, H2S, and CO2 from biogas, which are scored in a supervision level based upon environmental, economic, social and technical criteria. The sensitivity of the user towards those criteria is regarded by the EDSS giving a response based on its preferences. The EDSS was validated with data from a case-study for removing siloxanes from biogas in a sewage plant. The tool described the flow diagram of treatment alternatives and estimated the performance and effluent quality, which matched the treatment currently given in the facility. Adsorption onto activated carbon was the best-ranked technology due to its great efficiency and maturity as a commercial technology. On the other hand, biological technologies obtained high scores when economic and environmental criteria were preferred. The sensitivity analysis proved to be effective allowing the identification of the challenges and opportunities for the technologies considered, This work was cofunded by the Ministerio de Economica y Competitividad (Spain - CTQ2014-53718-R), FEDER and University of Girona. ES-C thanks Universitat de Girona for his predoctoral grant (IFUdG-2015/51). AC-C acknowledges support from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia (TECSPR16-1-0045). HM acknowledges support from the Spanish Ministry of Economy, Industry and Competitiveness for co-funding this study (IJCI-2015-23159). The authors also want to thank the plant manager of the case-study WWTP for all the data and support. LEQUIA has been recognized as consolidated research group by the Catalan Government (2017-SGR-1552)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Optimal management of substrates in anaerobic co-digestion: An ant colony algorithm approach

  • Verdaguer Planas, Marta
  • Molinos Senante, María
  • Poch, Manuel
Sewage sludge (SWS) is inevitably produced in urban wastewater treatment plants (WWTPs). The treatment of SWS on site at small WWTPs is not economical; therefore, the SWS is typically transported to an alternative SWS treatment center. There is increased interest in the use of anaerobic digestion (AnD) with co-digestion as an SWS treatment alternative. Although the availability of different co-substrates has been ignored in most of the previous studies, it is an essential issue for the optimization of AnD co-digestion. In a pioneering approach, this paper applies an Ant-Colony-Optimization (ACO) algorithm that maximizes the generation of biogas through AnD co-digestion in order to optimize the discharge of organic waste from different waste sources in real-time. An empirical application is developed based on a virtual case study that involves organic waste from urban WWTPs and agrifood activities. The results illustrate the dominate role of toxicity levels in selecting contributions to the AnD input. The methodology and case study proposed in this paper demonstrate the usefulness of the ACO approach in supporting a decision process that contributes to improving the sustainability of organic waste and SWS management, M. Verdaguer and M. Poch would like to acknowledge the funding of MINECO – Spain through the project CTQ2014-53718-R
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Efficient removal of siloxanes and volatile organic compounds from sewage biogas by an anoxic biotrickling filter supplemented with activated carbon

  • Santos Clotas, Eric
  • Cabrera-Codony, Alba
  • Boada Cahueñas, Ellana
  • Gich Batlle, Frederic
  • Muñoz, Raúl
  • Martín, María José
The removal of siloxanes (D4 and D5) and volatile organic contaminants (hexane, toluene and limonene) typically found in sewage biogas was investigated in a lab-scale biotrickling filter (BTF) packed with lava rock under anoxic conditions. Complete removal efficiencies for toluene and limonene were recorded at all empty bed residence time (EBRT) tested. The influence of EBRT was remarkable on the abatement of D5, whose removal decreased from 37% at 14.5 min to 16% at 4 min, while the removal of D4 and hexane remained below 16%. The packing material was supplemented with 20% of activated carbon aiming at increasing the mass transfer of the most hydrophobic pollutants. This strategy supported high removal efficiencies of 43 and 45% for hexane and D5 at the lowest EBRT. CO2 and silica were identified as mineralization products along with the presence of metabolites in the trickling solution such as dimethylsilanediol, 2-carene and α-terpinene, This work was funded by the Spanish Ministry of Science, Innovation and Universities (CTQ2014-53718-R) co-funded by FEDER and University of Girona. Eric Santos-Clotas thanks Universitat de Girona for his predoctoral grant (IFUdG-2015/51). Ellana Amparito Boada Cahueñas thanks SENESCYT – Ecuador for her predoctoral grant. Alba Cabrera-Codony acknowledges support from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement Nº 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia (TECSPR16-1-0045). The support from the regional government of Castilla y León and the EU-FEDER (CLU 2017-09) is also acknowledged. LEQUIA and IEA have been recognized as consolidated research groups by the Catalan Government (2017-SGR-1552 and 2017SGR-548, respectively)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Microbial Community Pathways for the Production of Volatile Fatty Acids From CO2 and Electricity

  • Wenzel, Jorge
  • Fiset, Erika
  • Batlle Vilanova, Pau
  • Cabezas, Ángela
  • Etchebehere, Claudia
  • Balaguer i Condom, Maria Dolors
  • Colprim Galceran, Jesús
  • Puig Broch, Sebastià
This study aims at elucidating the metabolic pathways involved in the production of volatile fatty acids from CO2 and electricity. Two bioelectrochemical systems (BES) were fed with pure CO2 (cells A and B). The cathode potential was first poised at −574 mV vs. standard hydrogen electrode (SHE) and then at −756 mV vs. SHE in order to ensure the required reducing power. Despite applying similar operation conditions to both BES, they responded differently. A mixture of organic compounds (1.87 mM acetic acid, 2.30 mM formic acid, 0.43 mM propionic acid, 0.15 mM butyric acid, 0.55 mM valeric acid, and 0.62 mM ethanol) was produced in cell A while mainly 1.82 mM acetic acid and 0.23 mM propionic acid were produced in cell B. The microbial community analysis performed by 16S rRNA gene pyrosequencing showed a predominance of Clostridium sp. and Serratia sp. in cell A whereas Burkholderia sp. and Xanthobacter sp. predominated in cell B. The coexistence of three metabolic pathways involved in carbon fixation was predicted. Calvin cycle was predicted in both cells during the whole experiment while Wood-Ljungdahl and Arnon-Buchanan pathways predominated in the period with higher coulombic efficiency. Metabolic pathways which transform organic acids into anabolic intermediaries were also predicted, indicating the occurrence of complex trophic interactions. These results further complicate the understanding of these mixed culture microbial processes but also expand the expectation of compounds that could potentially be produced with this technology, This research was financially supported by the Spanish Government (CTQ 2014-53718-R) and the National Agency of Research and Innovation of Uruguay (ANII; FSE6437 and FSE102488). JW was funded by the ANII-PhD grant (SNB). LEQUIA has been recognized as a consolidated research group by the Catalan Government under the code 2014-SGR-1168
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Validation of a decision support tool for wastewater treatment selection

  • Castillo Llorens, Alba
  • Porro, Jose
  • Garrido Baserba, Manel
  • Rosso, D.
  • Renzi, D.
  • Fatone, F.
  • Gómez, Vicente
  • Comas Matas, Joaquim
  • Poch, Manuel
Wastewater treatment selection is a complex task usually addressed by applying separate tools for the correct assessment of multi-criteria evaluation. Novedar_EDSS integrates technical, environmental, economic and social assessment capabilities in one single platform. The aim of this work is to evaluate and demonstrate the capabilities of this environmental decision support system (EDSS). For that purpose, 4 case studies of real projects were selected to validate the results in the EDSS by comparing them with those from the study of alternatives performed by the decision makers. Moreover, 1 conceptual case study was applied to support the selection of the most properly strategy for plant retrofitting. Results have demonstrated that the EDSS provides key aspects when deciding the retrofitting process to apply and, when compared to real projects, it recommends analogue treatments as those applied in the projects, ranking them in the same order. Therefore, results in the validation process performed show that this tool provides a reliable basis to support decision makers to select properly treatment alternatives in wastewater treatment plant pre-design, This work was partially supported by Doctorat Industrial 2013-DI-038 (AGAUR and SUEZ) and by the Spanish Ministry of Economy and Competitiveness (CTQ2014-53718-R). The authors would like to thank EU-Cost Action Water2020 (ECOST-STSMES1202-110614-044095). LEQUIA and ICRA were recognized as consolidated research groups by the Catalan Government with codes 2014-SGR-1168 and 2014-SGR-291, respectively