Skip to main content

ENCAPSULACION DE COMPUESTOS DE USO ALIMENTARIO MEDIANTE EMULSIFICACION POR MEMBRANAS DINAMICAS Y/O DE BAJO COSTE

CTQ2014-54520-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT ROVIRA I VIRGILI

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Low-energy membrane-based processes to concentrate and encapsulate polyphenols from carob pulp

  • Wang, Junjing
  • Martínez-Hernández, Andrea
  • De Lamo Castellví, Sílvia
  • Romero Fabregat, Mª Paz
  • Kaade, Wael
  • Ferrando, Montse
  • Güell, Carme
Forward osmosis (FO) and emulsification with dynamic membranes of tunable pore size (DMTS) were assessed to concentrate and encapsulate polyphenol extracts from carob pulp. In the FO step, a feed solution temperature of 40 °C resulted in the fastest concentration and the highest polyphenol yield. Moreover, FO at 35 °C enabled to concentrate up to about 20 times in 3 h using a pilot scale unit of 0.5 m2 of membrane area. Phenolic compounds were subsequently encapsulated in the inner water phase (W1) of water-in-oil-in-water (W1/O/W2) emulsions produced with DMTS, which enabled to obtain emulsions with a monomodal droplet size distribution (span<1, d3,2 ≤20 μm), and polyphenol encapsulation efficiencies ranging between 87.0 ± 0.2% and 77.4 ± 0.4%. To extend the shelf-life of the encapsulated polyphenols, solid microcapsules were produced by spray drying. After rehydrating the solid microcapsules, the structure of the W1/O/W2 emulsion was partially recovered., The authors are grateful to the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement (No. 713679) and the Universitat Rovira i Virgili (URV), and the Ministerio de Economía i Competitividad (CTQ 2014-54520-P) for their financial support in this research.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

ATR-FTIR Spectroscopy Combined with Multivariate Analysis Successfully Discriminates Raw Doughs and Baked 3D-Printed Snacks Enriched with Edible Insect Powder

  • García-Gutiérrez, Nerea
  • Mellado-Carretero, Jorge
  • Bengoa, Christophe
  • Salvador, Ana
  • Sanz Taberner, Teresa
  • Wang, Junjing
  • Ferrando, Montse
  • Güell, Carme
  • de Lamo-Castellví, Silvia
In a preliminary study, commercial insect powders were successfully identified using infrared spectroscopy combined with multivariate analysis. Nonetheless, it is necessary to check if this technology is capable of discriminating, predicting, and quantifying insect species once they are used as an ingredient in food products. The objective of this research was to study the potential of using attenuated total reflection Fourier transform mid-infrared spectroscopy (ATR-FTMIR) combined with multivariate analysis to discriminate doughs and 3D-printed baked snacks, enriched with Alphitobius diaperinus and Locusta migratoria powders. Several doughs were made with a variable amount of insect powder (0–13.9%) replacing the same amount of chickpea flour (46–32%). The spectral data were analyzed using soft independent modeling of class analogy (SIMCA) and partial least squares regression (PLSR) algorithms. SIMCA models successfully discriminated the insect species used to prepare the doughs and snacks. Discrimination was mainly associated with lipids, proteins, and chitin. PLSR models predicted the percentage of insect powder added to the dough and the snacks, with determination coefficients of 0.972, 0.979, and 0.994 and a standard error of prediction of 1.24, 1.08, and 1.90%, respectively. ATR-FTMIR combined with multivariate analysis has a high potential as a new tool in insect product authentication., This research was funded by Ministerio de Economía i Competitividad (CTQ 2014-54520-P), Ministerio de Ciencia e Innovación (PGC2018-097095-B-I00), and Agencia Estatal de Investigación, Fondo Social Europeo (FSE) and Iniciativa de Empleo Juvenil (PEJ2018-004192-A)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Rheological and Textural Characterisation of Chickpea Dough and Baked 3D-Printed Snacks Enriched with Alphitobius diaperinus and Locusta migratoria Powders

  • García Gutiérrez, Nerea
  • Salvador, Ana
  • Sanz Taberner, Teresa
  • Ferrando, Montse
  • Güell, Carme
  • Méndez, Carmen
  • de Lamo-Castellví, Silvia
Edible insect powder is a new ingredient that can be used to create innovative functional and nutritional properties in food products. However, adding insect powder to bakery goods could impact the dough’s technological and sensory attributes. This study aims to investigate possible alterations in dough enriched with insect powder and examine the texture of salty snacks produced using a 3D food printer. The doughs were prepared using varying quantities of two types of edible insect powders. The stiff flow properties showed a pseudoplastic behaviour that fit well with a power-law equation. Viscosity and pseudoplasticity increased in proportion to insect powder concentration, with the strongest effect observed for L. migratoria. The linear viscoelastic behaviour exhibited G′ values exceeding G″ values, and both moduli increased with insect concentration. A. migratoria displayed a greater elastic contribution (lower tan δ) compared to A. diaperinus, which correlates with the lower printability of A. migratoria. The texture of the snacks prepared with A. diaperinus demonstrated a rise in the breaking force as the insect concentration increased and exhibited a corresponding texture profile to the control and the 4.6% sample. Moreover, the addition of A. diaperinus heightened the crispiness., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research was funded by Ministerio de Economía i Competitividad (CTQ 2014–54520-P), Ministerio de Ciencia e Innovación (PGC2018-097095-B-I00), and Agencia Estatal de Investigación, Fondo Social Europeo (FSE) and Iniciativa de Empleo Juvenil (PEJ2018-004192-A). In addition, this study forms part of the AGROALNEXT programme (grant AGROALNEXT/2022/031) and was supported by MCIN (Spain) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (Spain). IATA-CSIC is a Centre of Excellence Severo Ochoa (CEX2021-001189-S funded by MCIN/AEI/ https://doi.org/10.13039/501100011033)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX 2021-001189-S), Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Low-energy membrane-based processes to concentrate and encapsulate polyphenols from carob pulp

  • Wang, Junjing
  • Martínez-Hernández, Andrea
  • De Lamo Castellví, Sílvia
  • Romero Fabregat, Mª Paz
  • Kaade, Wael
  • Ferrando, Montse
  • Güell, Carme
Forward osmosis (FO) and emulsification with dynamic membranes of tunable pore size (DMTS) were assessed to concentrate and encapsulate polyphenol extracts from carob pulp. In the FO step, a feed solution temperature of 40 °C resulted in the fastest concentration and the highest polyphenol yield. Moreover, FO at 35 °C enabled to concentrate up to about 20 times in 3 h using a pilot scale unit of 0.5 m2 of membrane area. Phenolic compounds were subsequently encapsulated in the inner water phase (W1) of water-in-oil-in-water (W1/O/W2) emulsions produced with DMTS, which enabled to obtain emulsions with a monomodal droplet size distribution (span<1, d3,2 ≤20 μm), and polyphenol encapsulation efficiencies ranging between 87.0 ± 0.2% and 77.4 ± 0.4%. To extend the shelf-life of the encapsulated polyphenols, solid microcapsules were produced by spray drying. After rehydrating the solid microcapsules, the structure of the W1/O/W2 emulsion was partially recovered., The authors are grateful to the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement (No. 713679) and the Universitat Rovira i Virgili (URV), and the Ministerio de Economía i Competitividad (CTQ 2014-54520-P) for their financial support in this research.