Skip to main content

DISPOSITIVOS ELECTROANALITICOS EN PAPEL: UNA NUEVA GENERACION DE TRANSDUCTORES Y PLATAFORMAS DE ANALISIS DESCENTRALIZADO Y DE BAJO COSTE

CTQ2014-58826-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD DE OVIEDO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sequential incorporation of metallic cations (Cd2+ and Hg2+) and N-octylamine into titanium phosphate nanoparticles and their subsequent release in acid media

  • Carrasco-Rodríguez, Javier
  • Martín-Yerga, Daniel
  • Garrido, Leoncio
  • Costa-García, Agustín
  • García Alonso, F. J.
Titanium phosphate nanoparticles, TPNP, consisting of a NaTi2(PO4)3 core and a shell of hydrogen phosphate and dihydrogen phosphate of titanium, undergo fast hydrolysis in water releasing phosphoric acid. This reaction is inhibited in the presence of metallic ions like Cd2+ or Hg2+, which are able to replace the protons of the shell acid phosphates. The amount of the adsorbed metallic cations could be regulated using counterions of different basicity. The resulting nanoparticles also incorporate NH2(CH2)7CH3 (N-octylamine) at room temperature forming N-octylammonium/phosphate ion pairs, but it was found that at higher cation concentration inside the nanoparticle, a lower amount of amine was adsorbed. The metallic cations and N-octylamine are released in acid media, but the starting material is not fully recovered., This work has been supported by the FC-15-GRUPIN-021 project from the Asturias Regional Government and the CTQ2014-58826-R project from the Spanish Ministry of Economy and Competitiveness (MEC). Daniel Martín-Yerga thanks the MEC for the award of a FPI grant (BES-2012- 054408). Leoncio Garrido acknowledges financial support provided by CSIC. We thank the technician Isabel Cancelo for the synthesis of the starting material, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning the incorporation of electroactive metals into titanium phosphate nanoparticles and the reverse metal extraction process: Application as electrochemical labels in multiplex biosensing

  • Carrasco-Rodríguez, Javier
  • García Alonso, F. J.
  • Costa-García, Agustín
  • Martín-Yerga, Daniel
In this work, titanium phosphate nanoparticles were modified with different electroactive metals (cadmium, bismuth, copper, silver and mercury), by a cation-exchange reaction. The amount of metal introduced into the nanoparticles depended strongly on the counter-ion used during the exchange reaction and the type of metal. Nanoparticles with a high metallic load could be generated. The electrolytic medium played an important role in the detection of these metal-modified nanoparticles, since the use of acid makes it possible to extract a large part of the introduced metal by reversing the cation-exchange reaction. The application of these nanoparticles in electrochemical detection was evaluated, the nanoparticles modified with copper and mercury proving superior in terms of sensitivity and selectivity in multiplex detection. As a proof of concept, these nanoparticles were used as labels in a multiplex electrochemical biosensor for the simultaneous detection of two analytes., This work has been supported by the FC-15-GRUPIN-021 project from the Asturias Regional Government and the CTQ2014-58826-R project from the Spanish Ministry of Economy and Competitiveness (MEC)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Competitive electrochemical biosensing of biotin using cadmium-modified titanium phosphate nanoparticles and 8-channel screen-printed disposable electrodes

  • Martín-Yerga, Daniel
  • Carrasco-Rodríguez, Javier
  • García Alonso, F. J.
  • Costa-García, Agustín
In this work, a method for the detection of biotin was developed using a competitive electrochemical biosensor and cadmium-modified titanium phosphate nanoparticles (CdTiPNPs) as detection labels. The electrochemical behaviour of CdTiPNPs was studied and a method for the detection of very low concentrations of these nanoparticles by anodic stripping voltammetry was optimized. After their modification with neutravidin, the nanoparticles were used as labels for the biotin competitive biosensor, which was carried out on the surface of disposable 8-channel screen-printed cards modified with biotinylated albumin. These devices allowed the detection of eight samples simultaneously, and a limit of detection in the order of 1 nM of biotin was obtained. The method was evaluated in real samples by carrying out the determination of biotin in multivitamin tablets. These results show that CdTiPNPs can compete in terms of analytical performance with quantum dots as detection labels, but the methodology is simpler since the typical acid digestion step to release the metals into the solution is not necessary., This work has been supported by the FC-15-GRUPIN-021 project from the Asturias Regional Government and the CTQ2014-58826-R project from the Spanish Ministry of Economy and Competitiveness (MEC). Daniel Martin-Yerga thanks the MEC for the award of an FPI grant (BES-2012-054408)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Disposable sensors in diagnostics, food, and environmental monitoring

  • Dincer, Can
  • Bruch, Richard
  • Costa-Rama, Estefanía
  • Fernández-Abedul, María Teresa
  • Merkoçi, Arben
  • Manz, Andreas
  • Urban, Gerald A.
  • Güder, Firat
Disposable sensors are low‐cost and easy‐to‐use sensing devices intended for short‐term or rapid single‐point measurements. The growing demand for fast, accessible, and reliable information in a vastly connected world makes disposable sensors increasingly important. The areas of application for such devices are numerous, ranging from pharmaceutical, agricultural, environmental, forensic, and food sciences to wearables and clinical diagnostics, especially in resource‐limited settings. The capabilities of disposable sensors can extend beyond measuring traditional physical quantities (for example, temperature or pressure); they can provide critical chemical and biological information (chemo‐ and biosensors) that can be digitized and made available to users and centralized/decentralized facilities for data storage, remotely. These features could pave the way for new classes of low‐cost systems for health, food, and environmental monitoring that can democratize sensing across the globe. Here, a brief insight into the materials and basics of sensors (methods of transduction, molecular recognition, and amplification) is provided followed by a comprehensive and critical overview of the disposable sensors currently used for medical diagnostics, food, and environmental analysis. Finally, views on how the field of disposable sensing devices will continue its evolution are discussed, including the future trends, challenges, and opportunities., This research was partially funded by the German Research Foundation (DFG) under Grant Nos. UR 70/10‐01, UR 70/12‐01, and DI 2345/3‐1; the Spanish Ministry of Economy and Competitiveness (MINECO) under project CTQ2014‐58826‐R; and Severo Ochoa program under Grant No. SEV‐2013‐0295. F.G. thanks the Wellcome Trust (207687/Z/17/Z), EPSRC (EP/R010242/1), and the Royal Society (RG160368) for their generous support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A monoclonal antibody-based immunosensor for the electrochemical detection of imidacloprid pesticide

  • Pérez-Fernández, Beatriz
  • Mercader Badia, Josep Vicent
  • Checa-Orrego, Brena I.
  • de la Escosura Muñiz, Alfredo
  • Costa-García, Agustín
Imidacloprid (IMD) is one of the most used pesticides worldwide as a systemic insecticide as well as for pest control and seed treatment. The toxic and potential carcinogenic character of IMD makes its monitoring of great relevance in the field of agriculture and environment, so sensitive methodologies for in field analysis are strongly required. In this context, we have developed a competitive immunoassay for the determination of IMD using specific monoclonal antibodies followed by electrochemical detection on screen-printed carbon electrodes (SPCE). The optimized immunosensor exhibited a good reproducibility (RSD of 9%) and a logarithmic response in the range 50-10 000 pM of IMD, with an estimated detection limit (LOD) of 24 pM, which was below the maximum levels allowed by the legislation. High-Performance Liquid Chromatography-Mass Spectrometry-Mass Spectrometry (HPLC-MSMS) and Enzyme-Linked Immunosorbent Assay (ELISA) analysis were also performed for comparison purposes, where the electrochemical immunosensor exhibited a wider range of response and a lower detection limit. Matrix effects below 6.5% were obtained using tap water samples. All these characteristics make our electrochemical immunosensor a valid and advantageous tool for the in field determination of IMD., This work has been supported by the FC-GRUPIN-ID/2015/021 and FC-GRUPIN-ID/2018/000166 projects from the Asturias Regional Government and the CTQ2014–58826-R and CTQ2017–86994-R projects from the Spanish Ministry of Economy and Competitiveness (MINECO). A. de la Escosura-Muñiz acknowledges the Spanish Ministry of Science, Innovation and Universities (MICINN) for the “Ramón y Cajal” Research Fellow (RyC-2016-20299).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Disposable Sensors in Diagnostics, Food, and Environmental Monitoring

  • Dincer, Can|||0000-0003-3301-1198
  • Bruch, Richard|||0000-0003-0893-330X
  • Costa Rama, Estefanía|||0000-0002-5357-9269
  • Fernández Abedul, María Teresa|||0000-0003-3782-5025
  • Merkoçi, Arben|||0000-0003-2486-8085
  • Manz, Andreas|||0000-0001-9712-711X
  • Urban, Gerald Anton
  • Güder, Firat|||0000-0001-5454-0609
Disposable sensors are low-cost and easy-to-use sensing devices intended for short-term or rapid single-point measurements. The growing demand for fast, accessible, and reliable information in a vastly connected world makes disposable sensors increasingly important. The areas of application for such devices are numerous, ranging from pharmaceutical, agricultural, environmental, forensic, and food sciences to wearables and clinical diagnostics, especially in resource-limited settings. The capabilities of disposable sensors can extend beyond measuring traditional physical quantities (for example, temperature or pressure); they can provide critical chemical and biological information (chemo- and biosensors) that can be digitized and made available to users and centralized/decentralized facilities for data storage, remotely. These features could pave the way for new classes of low-cost systems for health, food, and environmental monitoring that can democratize sensing across the globe. Here, a brief insight into the materials and basics of sensors (methods of transduction, molecular recognition, and amplification) is provided followed by a comprehensive and critical overview of the disposable sensors currently used for medical diagnostics, food, and environmental analysis. Finally, views on how the field of disposable sensing devices will continue its evolution are discussed, including the future trends, challenges, and opportunities.