Skip to main content

DESARROLLO DE PROCESOS CATALITICOS Y FOTOCATALITICOS PARA LA VALORIZACION DEL GAS NATURAL: ACTIVACION Y TRANSFORMACION DE METANO E HIDROCARBUROS LIGEROS

CTQ2014-60524-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD DE SEVILLA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards the hydrogen production by photocatalysis

  • Colón, Gerardo
Nowadays, problems derived from climate change urgently demand us to focus our attention on new alternatives to fossil fuels. Within this framework, the photocatalytic production of hydrogen as a clean fuel from oxygenates arises as a necessary option that must be considered. Thus, the development of highly efficient photocatalyst is crucial in order to achieve a viable technology under the industrial point of view. For this sake, it is necessary to understand the principles of photoreforming reaction. In this brief review we will revisit the different photocatalytic materials proposed in the literature highlighting on the role of different co-catalysts., The financial support by CTQ2014-60524-R project is fully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nickel catalyst with outstanding activity in the DRM reaction prepared by high temperature calcination treatment

  • Smoláková, Lucie
  • Kout, Martin
  • Capek, Libor
  • Rodriguez-Gomez, Alberto
  • González-Delacruz, V.M.
  • Hromádko, Ludek
  • Caballero, Alfonso
The catalytic performance of some Ni-Ce/AlO catalytic systems (11 wt.% Ni and 3 wt.% Ce) were checked after being submitted to different calcination and reduction treatments. It was found that, the reduced Ni-Ce/AlO catalysts were more active and stable in the dry reforming reaction of methane than the corresponding not-reduced catalysts. This high activity was initially connected with the smaller size of pre-reduced Ni species, which at the same time leads on to the formation of filamentous carbon. The best overall performance was obtained for the reduced catalyst after being calcined at 1000 °C. This catalyst presents a very high stability, a low level of carbon formation, maintaining the nickel particle size constant during reaction. Surprisingly, although its reduction degree is only 12% at 750 °C, its catalytic activity is similar to the full reduced catalysts. So, the small number of reduced metallic particles of this catalyst shows a very high activity, much higher than the other catalysts., The authors gratefully thank to the European Social Fund in the Czech Republic for financial support of the project ‘Router’ Development of Research Teams at the University of Pardubice (Project No. CZ.1.07/2.3.00/30.0058). We also thank the Ministry of Science and Education of Spain for financial support (Projects ENE2011-24412 and CTQ2014-60524-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cobalt carbide identified as catalytic site for the dehydrogenation of ethanol to acetaldehyde

  • Rodriguez-Gomez, Alberto
  • Holgado, Juan P.
  • Caballero, Alfonso
Two cobalt catalysts, Co/SBA-15 and Co/SiO, have been studied in steam reforming of ethanol (SRE). Besides the steam reforming products, ethoxide dehydrogenation to acetaldehyde is observed as one of the main reactions. Although by hydrogen treatment cobalt is reduced to the metallic state, under SRE conditions, a phase appears that has been identified as cobalt carbide and correlates with acetaldehyde production. These findings provide insights about the catalytic sites, for SRE, in cobalt catalysts. Comparison with previous results shows that these conclusions are not translatable to other cobalt catalysts, stressing the importance of the support on the catalytic behavior of cobalt. (Chemical Equation Presented)., We thank the “Ministerio de Economia and Competitividad” of Spain (Project Nos. ENE2011-24412 and CTQ2014-60524-R) and the ALBA facility and staff (BL22 CLAESS beamline) for their experimental support. A.R.G thanks also the Spanish Government for the PhD fellowship (No. BES-2012-061744).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Preferential oxidation of CO on a La-Co-Ru perovskite-type oxide catalyst

  • Pereñíguez, Rosa
  • Caballero, Alfonso
  • Ferri, Davide
A Ru-containing perovskite-type oxide La(Co,Ru)O of nominal composition LaCoRuO was prepared by ultrasonic spray combustion and tested for the preferential oxidation of CO (PROX). EXAFS indicated that Ru adopted the coordination environment of Co in LaCoO while Co was present as LaCoO and CoO. PROX activity was replaced by CO hydrogenation activity above 250 °C. Short oxidation at 500 °C between temperature programmed reaction ramps did not restore the initial La(Co,Ru)O structure but generated a catalyst with improved PROX activity compared to the initial La(Co,Ru)O. Under reductive PROX conditions the material experienced structural changes that improved its overall catalytic activity only if the catalyst was oxidized after each temperature programmed ramp., The authors kindly acknowledge the financial support from the Spanish Ministry of Research (Project CTQ2014-60524-R), the University of Seville for a scholarship for R.P. and the Swiss National Science Foundation (SNF)(Project nr. 200021_159568).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photochemical methane partial oxidation to methanol assisted by H2O2

  • López-Martín, Ángeles
  • Caballero, Alfonso
  • Colón, Gerardo
The photochemical conversion of methane into methanol from H2O2 aqueous solution as well as the effect of the addition mode were studied. Direct addition of different amounts H2O2 leads to increasing methanol production at the first stage of the reaction. The excess of H2O2 would lead to the reactive oxygen species scavenging and the subsequent O2 production. It was also corroborated that extra hydroxyl radicals in the aqueous medium do not improve the formation of methanol but a noticeable increase in the formation of HCOOH with respect to methanol was evidenced. In contrast, dosing addition at relatively low rates leads to constant methane consumption towards methanol. Methanol formation would be in this case in equilibrium with further oxidation to HCOOH or CO2. This suggests that only a controlled constant availability of HO’s at low concentration can enhance the performance of methanol generation in the photochemical process., The financial support from MINECO/FEDER through CTQ2014-60524-R project is fully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Analysis of Ni species formed on zeolites, mesoporous silica and alumina supports and their catalytic behavior in the dry reforming of methane

  • Drobná, Helena
  • Kout, Martin
  • Sołtysek, Agnieszka
  • González-Delacruz, V.M.
  • Caballero, Alfonso
  • Capek, Libor
The presented investigation is focused on the analysis of Ni species formed on microporous (zeolites MFI and FAU) and mesoporous materials (Al-MCM-41 and SBA-15) and alumina supports and their catalytic behavior in the dry reforming of methane. The paper lays emphasis on the relationship between the catalytic behavior of Ni-based catalysts and their textural/structural properties. Ni-based catalysts were prepared by wet impregnation (11 wt% of Ni) followed by calcination in air and reduction in hydrogen. The properties of Ni-based catalysts were also compared prior and after the catalytic tests. The critical role was played by the high value of the specific surface area and the high strength of the interaction between the Ni species and the support, which both determined the high dispersion and stability of metal Ni particles. Ni–Al–MCM-41 and Ni–SBA-15 showed the values of the conversion of CO and CH above 90% (stable during 12 h). Slightly lower values of the conversion of CO and CH were observed over Ni–AlO (also stable during 12 h). In contrast to these materials, Ni–MFI and Ni–FAU exhibited the worse metallic Ni particles dispersion and very bad catalytic behavior., The authors gratefully thank to the European Social Fund in the Czech Republic for financial support of the project ‘Router’ Development of Research Teams at the University of Pardubice (Project No. CZ.1.07/2.3.00/30.0058). We also thank the Ministry of Science and Education of Spain for financial support (Projects ENE2011-24412 and CTQ2014-60524-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Phase-contact engineering in mono- and bimetallic Cu-Ni Co-catalysts for hydrogen photocatalytic materials

  • Muñoz-Batista, Mario J.
  • Motta Meira, D.
  • Colón, Gerardo
  • Kubacka, Anna
  • Fernández, M.
Understanding how a photocatalyst modulates its oxidation state, size, and structure during a photocatalytic reaction under operando conditions is strongly limited by the mismatch between (catalyst) volume sampled by light and, to date, the physicochemical techniques and probes employed to study them. A synchrotron micro-beam X-ray absorption spectroscopy study together with the computational simulation and analysis (at the X-ray cell) of the light-matter interaction occurring in powdered TiO-based monometallic Cu, Ni and bimetallic CuNi catalysts for hydrogen production from renewables was carried out. The combined information unveils an unexpected key catalytic role involving the phase contact between the reduced and oxidized non-noble metal phases in all catalysts and, additionally, reveals the source of the synergistic Cu-Ni interaction in the bimetallic material. The experimental method is applicable to operando studies of a wide variety of photocatalytic materials., Authors thanks MINECO‐Spain (Projects ENER2016‐77798‐C4‐1‐R, CTQ2014‐60524‐R, and M‐Era.Net RATOCAT PCIN‐2017‐056 project) for financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Solar pilot plant scale hydrogen generation by irradiation of Cu/TiO2 composites in presence of sacrificial electron donors

  • Maldonado, M. I.
  • López-Martín, Ángeles
  • Colón, Gerardo
  • Peral, J.
  • Martínez-Costa, J.I.
  • Malato, S.
A Cu/TiO2 photocatalyst has been synthesised by reducing a Cu precursor with NaBH4 onto the surface of a sulphate pretreated TiO2 obtained by a sol-gel procedure. The catalyst, that shows a clearly defined anatase phase with high crystallinity and relatively high surface area, and contains Cu2O and CuO deposits on its surface, has been used to produce hydrogen in a solar driven pilot plant scale photocatalytic reactor. Different electron donor aqueous solutions (methanol, glycerol, and a real municipal wastewater treatment plant influent) have been tested showing similar or even higher energy efficiency than those obtained using more expensive noble metal based photocatalytic systems. The glycerol solutions have provided the best reactive environments for hydrogen generation., The financial support by MINECO/FEDER through CTQ2013-47103-R and CTQ2014-60524-R projects is fully acknowledged. We also thank MINECO/FEDER for M-ERA.Net RATOCAT project (PCIN-2017-056 and PCIN-2017-131).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structural reversibility of LaCo1-xCuxO3 followed by in situ X-ray diffraction and absorption spectroscopy

  • Pereñíguez, Rosa
  • Ferri, Davide
Combinations of perovskite-type oxides with transition and precious metals exhibit a remarkable self-regenerable property that could be exploited for numerous practical applications. The objective of the present work was to study the reversibility of structural changes of perovskite-type oxides under cyclic reducing/oxidizing atmosphere by taking advantage of the reducibility of LaCoO. LaCoO and LaCoCuO were prepared by ultrasonic spray combustion and were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray absorption spectroscopy (XAS) and temperature-programmed reduction (TPR). XRD and XAS data confirmed that copper adopted the coordination environment of cobalt at the B-site of the rhombohedral LaCoO under the selected synthesis conditions. The structural evolution under reducing atmosphere was studied by in situ XRD and XANES supporting the assignment of the observed structural changes to the reduction of the perovskite-type oxide from ABB'O (B’=Cu) to B’/ABO and to B’B/AO. Successive redox cycles allowed the observation of a nearly complete reversibility of the perovskite phase, i. e. copper was able to revert into LaCoO upon oxidation. The reversible reduction/segregation of copper and incorporation at the B-site of the perovskite-type oxides could be used in chemical processes where the material can be functionalized by segregation of Cu and protected against irreversible structural changes upon re-oxidation., The authors kindly acknowledge the financial support from the Spanish Ministry of Research (Project CTQ2014‐60524‐R), the IV Plan Propio of the University of Seville for a scholarship for R.P. and the Swiss National Science Foundation (SNF).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Improving the direct synthesis of hydrogen peroxide from hydrogen and oxygen over Au-Pd/SBA-15 catalysts by selective functionalization

  • Rodríguez-Gómez, A.
  • Platero, F.
  • Caballero, A.
  • Colón, Gerardo
A series of gold-palladium catalysts supported in a mesoporous surface functionalized silica SBA-15 was studied for H2O2 direct synthesis. Support functionalization was performed using different organic groups (namely SO3H, NH2 and SH) while metal was then supported by an ion exchanged method. Different Au-Pd/SBA-15 catalysts were tested in the Direct Synthesis of Hydrogen Peroxide (DSHP). Organic functional groups (SH, SO3H and NH2) with acid-base properties acted as anchoring sites controlling both the dispersion of the metallic active phase and the chemical state of gold and palladium species as Au+ and Pd2+, respectively. Compared to a Au-Pd/SBA-15 system prepared by incipient wetness impregnation over non-functionalized SBA-15, catalytic performance is improved upon functionalization, increasing hydrogen peroxide rate in sulfonic-SBA-15 systems and reducing the hydrogenation/decomposition activity by adding amine groups. The occurrence of amine groups clearly suppresses the support microporosity and probably condition the metal cluster size. The analysis of particle size by TEM showed that sulfonated samples lead to a Pd size compromise which improves the H2O2 production hindering the competitive side reactions, particularly suppressed by the presence of amine groups., We thank the “Ministerio de Economía and Competitividad” of Spain (Projects CTQ2014-60524-R and ENE2017-88818-C2-1-R). A.R.G thanks also the MINECO for the PhD fellowship (BES-2012-061744).