Skip to main content

TECNOLOGIAS CATALITICAS AVANZADAS PARA LA TRANSFORMACION DE RESIDUOS BIOMASICOS EN BIOCOMBUSTIBLES Y PRODUCTOS RENOVABLES

CTQ2015-64226-C3-1-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Gas phase oxidation of furfural to maleic anhydride on V2O5/g-Al2O3 catalysts: Reaction conditions to slow down the deactivation

  • Alonso Fagúndez, Noelia
  • Ojeda Pineda, Manuel
  • Mariscal López, Rafael
  • García Fierro, José Luis
  • López Granados, Manuel
An alumina-supported vanadium oxide catalyst (13.9 wt.% vanadium oxide) has been characterized by different techniques and tested in the gas phase oxidation of furfural. These studies have shown that the catalyst unavoidably deactivates by deposition of maleates and resins over the surface. Full regeneration is accomplished by burning off these deposits at 773 K. The studies have also demonstrated that if the primary contact occurs at temperatures at which furfural conversion is low and then the temperature is increased in a low- to high-temperature mode, intense deposition of maleates and resins takes place and the catalyst is rapidly deactivated. The increase of the temperature does not result in removal of deposits but accelerates the deposition. Under this protocol, the yield of maleic anhydride never exceeded 30%, irrespective of the reaction conditions (temperature and O2/furfural mole ratio). In contrast, if the catalyst first contacts the reaction mixture at high oxidizing potential, then the rate of maleate and resin deposition is much slower, and so is the deactivation rate, and the catalyst can display a higher yield of maleic anhydride for a longer period of time. A high oxidizing potential can be attained at a high reaction temperature (close to full conversion). A higher oxidizing potential at a given high temperature can be accomplished by increasing the O2/furfural mole ratio. Thus, for example, first contacting the catalyst at 593 K (full conversion), 1 vol.% of furfural, and O2/furfural mole ratio = 10, obtained an initial maleic anhydride yield of 68%, and the yield was still greater than 50% after 15 h on stream. On contacting at 573 K with 1 vol.% furfural and 20 vol.% O2, the maleic anhydride yield was initially close to 75% and was above 60% after 15 h., Financial support from the Spanish Ministry of Economy and Competitiveness is gratefully acknowledged Project (CTQ2015-64226-C3-1-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Direct Conversion of Levulinic Acid into Valeric Biofuels Using Pd Supported Over Zeolites as Catalysts

  • Muñoz-Olasagasti, M.
  • Sañudo-Mena, A.
  • Cecilia, J.A.
  • López Granados, Manuel
  • Maireles-Torres, P.
  • Mariscal López, Rafael
A series of Pd-based catalysts was prepared by incipient wetness impregnation over different acidic supports: amorphous SiO2-Al2O3, ZSM5 and beta zeolites. In addition to the effect of the support, other variables like the metal loading (0, 1, 2 and 4 wt%) on ZSM5 were tested in the direct conversion of levulinic acid (LA) to valeric biofuels (valeric acid/ester). The best result, a 92% yield of valeric biofuels, was obtained for a 2 wt% Pd supported on ZSM5 catalyst (2PdZSM5) after 8 h of reaction at 240 °C. Characterization techniques such as FTIR spectroscopy (using deuterated acetonitrile and CO as probe molecules), TEM and XPS were employed to explain this catalytic performance. FTIR spectra with deuterated acetonitrile evidenced the moderate acidity (in terms of concentration and strength) of the 2PdZSM5 catalyst, a desirable feature for the proper realization of this reaction. It has been observed that the acidity of the support favors the Pd dispersion, but it is less relevant for its catalytic properties. Finally, the stability of a representative catalyst was demonstrated under flow conditions for over 90 h, obtaining moderate but stable yields for the 2PdZSM5 catalyst. © 2019, Springer Science+Business Media, LLC, part of Springer Nature., Financial support from Spanish Ministry of Economy and Competitiveness (CTQ2015-64226-C3-1-R and CTQ2015-64226-C3-3-R) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Post-synthesis Treatment of TS-1 with TPAOH: Effect of Hydrophobicity on the Liquid-Phase Oxidation of Furfural to Maleic Acid

  • Rodenas Olaya, Yolanda
  • García Fierro, José Luis
  • Mariscal López, Rafael
  • Retuerto, María
  • López Granados, Manuel
A series of modified TS-1 catalysts was prepared by post-synthesis hydrothermal treatment of a parent TS-1 zeolite with solutions of different concentrations of tetrapropylammonium hydroxide (TPAOH). The treatment results in an advantageous improvement of the catalytic activity for the liquid oxidation of furfural with H2O2 to produce maleic acid. The highest yield of maleic acid (83%) was obtained when using 0.025 M TPAOH solution; while the maximum yield of the untreated TS-1 was 70%. The catalysts were thoroughly characterised by XRD, UV–Vis, ICP–OES, XPS, TEM, N2-adsorption, DRIFT of chemisorbed deuterated acetonitrile and TEM, in order to elucidate the origin of the catalytic improvement. The characterisation studies allowed us to conclude that, besides the well-known creation of mesopores within the zeolite primary particles, the TPAOH treatment also results in the increase of the hydrophobicity balance of the channels and cavities of the zeolites (via silanols removal). Both properties have a relevant effect on the improvement of the catalytic properties. © 2019, Springer Science+Business Media, LLC, part of Springer Nature., Financial support from the Spanish Ministry of Science, Innovation and Universities (MICINN) (project CTQ2015-64226-C3-1-R) and from CSIC (i-link1048 project) is gratefully acknowledged. Y.R. thanks MINECO for her FPI pre-doctoral grant (BES-2016-077184) and M.R. thanks the MINECO project ENE2016-77055-C3-3-R for her postdoctoral contract., The online version of this article (https ://doi.org/10.1007/s1124 4-019-01149 -2) contains supplementary material, which is available to authorized users., Peer reviewed