Skip to main content

TRATAMIENTOS CATALITICOS AVANZADOS PARA LA VALORIZACION DE LA BIOMASA Y LA ELIMINACION DE RESIDUOS ASOCIADOS

CTQ2015-68951-C3-3-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSIDAD DE MALAGA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Porous clays heterostructures as supports of iron oxide for environmental catalysis

  • Sanchis Martinez, Rut
  • Cecilia,J.A.
  • Vazquez, Isabel
  • Dejoz, Ana
  • Rodriguez-Castellon, E.
  • Solsona Espriu, Benjamin Eduardo
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Porous Clays Heterostructures (PCH) from natural pillared clays (bentonite with a high proportion of montmorillonite) have been used as supports of iron oxide for two reactions of environmental interest: i) the elimination of toluene (a representative compound of one of the most toxic subsets of volatile organic compounds, aromatics) by total oxidation and ii) the selective oxidation of H2S to elemental sulfur. For both reactions these catalysts have resulted to be remarkably more efficient than similar catalysts prepared using conventional silica as a support. Thus, in the total oxidation of toluene it has been observed that the catalytic activity obtained using siliceous PCH is two orders of magnitude higher than that with conventional silica. The catalytic activity has shown to be dependant of the capacity of the support for dispersing iron oxide in a way that the higher the dispersion of iron oxide on the surface of the support, the higher is the activity. In the case of the selective oxidation of H2S to S both higher catalytic activity and higher selectivity to S have been observed using siliceous porous clays heterostructures than using conventional silica. Highly dispersed FeOx species have been shown as highly selective towards elemental sulfur whereas more aggregated FeOx species favour the formation of sulphur oxides decreasing the selectivity to S. Analyses of the surface by XPS have shown the predominance of sulfate species in the catalysts presenting low selectivity to elemental sulfur., The authors would like to acknowledge the DGICYT in Spain (CTQ2015-68951-C3-1-R, CTQ2015-68951-C3-3-R, CTQ2012-37925-C03-2, CTQ2012-37925-C03-3 and CTQ2012-37984-C02-01) and FEDER for financial support. We also thank the University of Valencia for funding (UV-INV-AE-16-484416) and SCSIE-UV for assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Partial oxidation of H2S to sulfur on V-Cu-O mixed oxides bronzes

  • Ruiz-Rodríguez, Lidia
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Rodríguez-Castellón, Enrique
[EN] The present paper shows the influence of Cu-content in Cu-promoted V2O5 catalysts on both the physicochemical characteristics of catalysts and their catalytic performance in the partial oxidation of hydrogen sulfide. Both, the catalytic activity for H2S conversion and the selectivity to sulfur increased when increasing the Cu/V ratio of catalysts. The best catalyst gives a selectivity to sulfur at ca. 98% at total conversion of H2S. According to the characterization results (XRD, FTIR), V2O5 is partially transformed into vanadium oxide bronze, i.e. beta-Cu0.261V2O5, up to Cu/V ratios of 0.25. For higher Cu/V ratios, CuV2O6 and beta-Cu0.261V2O5 are observed. In the same way, the reducibility of V-species increased when increasing the Cu/V ratio of catalysts. On the other hand, the characterization of used catalysts indicates the transformation of V2O5 into V4O9, whereas the vanadium oxide bronze is stable under the studied reaction. The catalytic results are explained on the basis of the nature of crystalline phases and the presence of V5+-O-V4+ pairs in the more selective catalysts., The authors would like to acknowledge the Spanish MINECO Projects (CTQ2015-68951-C3-1-R and CTQ2015-68951-C3-3-R) and Severo Ochoa Program (SEV-2016-0683), and FEDER funds, for financial support. LRR thanks the MINECO for a predoctoral contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ferric sludge derived from the process of water purification as an efficient catalyst and/or support for the removal of volatile organic compounds

  • Sanchis, Rut
  • Dejoz, Ana
  • Vázquez, Isabel
  • Vilarrasa-García, Enrique
  • Jiménez-Jiménez, José
  • Rodríguez-Castellón, Enrique
  • Solsona, Benjamín
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Ferric chloride solutions are used as coagulants or flocculants in water treatment operations for human consumption. This treatment produces large amounts of clay-type solids formed mainly of montmorillonite with iron oxides and humic substances. This ferric sludge can be used as an efficient catalyst for the removal of volatile organic compounds (VOCs) by total oxidation. This waste isolated in the purification process has been activated by calcinations in air, characterized by several physicochemical techniques and employed as a catalyst for the removal by total oxidation of representative VOCs: toluene, propane and mixtures of toluene/propane with or without water. This ferric sludge has shown a catalytic activity one order of magnitude higher than that of a commercial iron oxide. This high activity has been related to the composition of the sludge (as it contains active metal oxides such as oxides of iron and manganese) and to the porous structure (leading to a reasonably high surface area). Moreover, it can be also used as a support for platinum, showing comparable (or even higher) catalytic activity than a similar platinum catalyst supported on conventional gamma-alumina., The authors would like to acknowledge the DGICYT in Spain CTQ2012-37925-C03-2, CTQ2015-68951-C3-1-R and CTQ2015-68951-C3-3-R. Authors from UV thank the University of Valencia (UV-INV-AE16-484416 project) and MINECO (MAT2017-84118-C2-1-R project) for funding. Finally, authors thank the Electron Microscopy Service of SCSIE of Universitat de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

NiO diluted in high surface area TiO2 as efficient catalysts for the oxidative dehydrogenation of ethane

  • Sanchis, R.
  • Delgado-Muñoz, Daniel
  • Agouram, S.
  • Vázquez, M. I.
  • Rodriguez-Castellon, E.
  • Solsona, B.
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Catalysts consisting of NiO diluted in high surface area TiO2 can be as efficient in the oxidative dehydrogenation of ethane as the most selective NiO-promoted catalysts reported previously in the literature. By selecting the titania matrix and the NiO loading, yields to ethylene over 40% have been obtained. In the present article, three different titanium oxides (TiO2) have been employed as supports or diluters of nickel oxide and have been tested in the oxidative dehydrogenation of ethane to ethylene. All TiO2 used present anatase as the main crystalline phase and different surface areas of 11,55 and 85 m(2) g(-1). It has been observed that by selecting an appropriate nickel loading and the titanium oxide extremely high selectivity towards ethylene can be obtained. Thus, nickel oxide supported on TiO2 with high surface areas (i.e. 55 and 85 m(2) g(-1)) have resulted to give the best catalytic performance although the optimal nickel loading is different for each case. The optimal catalyst has been obtained for NiO-loadings up to 5-10 theoretical monolayers regardless of the TiO2 employed. Free TiO2 is inactive whereas unsupported NiO is active and unselective (forming mainly carbon dioxide) and, therefore, unmodified NiO particles have to be avoided in order to obtain the optimal catalytic performance. The use of low surface area titania (11 m(2) g(-1)) have led to the lowest selectivity to olefin due to the presence of an excess of free NiO particles. (C) 2017 Elsevier B.V. All rights reserved., The authors would like to acknowledge the DGICYT in Spain CTQ2012-37925-C03-2, CTQ2015-68951-C3-1-R, CTQ2015-68951-C3-3-R and SEV-2012-0267 Projects for financial support. D.D. also thanks Severo Ochoa Excellence fellowship (SVP-2014-068669). We also thank the University of Valencia (UV-INV-AE-16-484416 project) and SCSIE-UV for assistance
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Gas phase dehydration of glycerol to acrolein over WO3-based catalysts prepared by non-hydrolytic sol-gel synthesis

  • Nadji, L.
  • Masso Ramírez, Amada
  • Delgado-Muñoz, Daniel
  • Isaadi, R.
  • Rodríguez-Aguado, E.
  • Rodriguez-Castellon, E.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Solid acid catalysts based on WO3¿SiO2 and WO3¿ZrO2¿SiO2 were prepared by one-pot non-hydrolytic sol¿gel method and tested in the gas phase glycerol dehydration to acrolein. Their structural and textural characteristics were determined by X-ray diffraction (XRD), N2 adsorption, X-ray energy dispersive spectroscopy (XEDS), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). Their acid characteristics were studied by both temperature programmed desorption of ammonia (NH3-TPD) and FTIR of adsorbed pyridine. Under our operating conditions, all the catalysts were active and selective in the transformation of glycerol to acrolein, which was always the main reaction product. The high selectivity to acrolein is achieved on catalysts presenting a higher proportion of Brønsted acid sites. In addition, the role of oxygen in the feed on catalytic performance of these catalysts is also discussed., The authors would like to acknowledge the DGICYT (CTQ2015-68951-C3-1-R, CTQ2015-68951-C3-3-R and SEV-2016-0683) and Secretary of State for International Cooperation in Spain (Project AP/040992/11) and Ministry of Higher Education and Scientific Research of Algeria for the National Exceptional Program for the fellowships. D. D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). Authors also would like to thank the Electron Microscopy Service of Universitat Politecnica de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of Phase Composition of Bulk Tungsten Vanadium Oxides on the Aerobic Transformation of Methanol and Glycerol

  • Delgado-Muñoz, Daniel
  • Chieregato, Alessandro
  • Rodríguez-Aguado, E.
  • Rodriguez-Castellon, E.
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • Ruiz-Rodríguez, Lidia
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] A series of W-V-O catalysts with different m-WO3 and h-WO3 phase contents were hydrothermally synthesized by employing different tungsten, vanadium, and ammonium precursors and characterized by powder XRD, N-2 adsorption, SEM, X-ray energy-dispersive spectroscopy, thermogravimetric analysis, Raman and FTIR spectroscopy, NH3 temperature programmed desorption, H-2 temperature-programmed reduction, and XPS. Finally, the acid/redox properties were analyzed by using aerobic transformation of methanol as a characterization reaction. A correlation between phase composition as well as acid and redox properties was observed, which were correlated to the catalytic performance of the title materials in a one-pot oxydehydration reaction of glycerol. The hexagonal tungsten bronze (h-WO3) phase shows a significantly higher concentration of acid sites than monoclinic m-WO3, so that the acid properties of W-V-O oxides are directly related to the presence of h-WO3 crystals. The presence of a higher concentration of acid sites in V-containing h-WO3 crystals is a key factor to achieve high selectivity to both acrolein and acrylic acid during one-pot glycerol oxydehydration. Also, V sites in h-WO3 show higher selectivity in the consecutive reaction (partial oxidation of acrolein to acrylic acid), while V sites in the m-WO3 phase fundamentally lead to the formation of carbon oxides., The authors acknowledge the DGICYT in Spain, CTQ2015-68951-C3-1-R and CTQ2015-68951-C3-3-R. Authors from ITQ also thank Project SEV-2016-0683 for financial support. D. D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). The research group of Prof. Fabrizio Cavani (University of Bologna, Italy)and Consorzio INSTM (Firenze) are gratefully acknowledged for a PhD grant to A. C. Authors also thank the Electron Microscopy Service of Universitat Politecnica de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Support effects on NiO-based catalysts for the oxidative dehydrogenation (ODH) of ethane

  • Delgado-Muñoz, Daniel
  • Sanchís, R.
  • Cecilia, J. A.
  • Rodríguez-Castellón, E.
  • Caballero, A.
  • Solsona, B.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] We report on the effect of NiO-support interactions on the chemical nature of Ni species in a series of supported NiO catalysts for the ODH of ethane. SiO2, TiO2-anatase, a high surface area TiO2 and a porous clay hetero-structure (PCH) with TiO2 and SiO2 pillars were used as supports, which led to a selectivity to ethylene in the range 30-90% over supported NiO catalysts. The catalysts were characterized by means of XRD, N-2-Adsorption, H-2-TPR, XPS and in situ (under H-2 reductive atmosphere) and ex situ XAS spectroscopy. The catalytic performance of supported materials is discussed in terms of their reducibility and specific reduction kinetics, but also taking into account the specific chemical nature of Ni species on each catalyst. The influence of the particle size and the presence of Ni and O vacancies on the catalytic performance in the ODH of ethane is inferred., Authors would like to thank the DGICYT in Spain CTQ2015-68951-C3-1-R, CTQ2015-68951-C3-3-R, CTQ2012-37925-C03-2 and ENE2017-88818-C2-1-R. Also authors want to acknowledge the ALBA Synchrotron Light Source (Project ID: 2015021258 at CLAESS beamline). Authors from ITQ thank Project SEV-2016-0683 for financial support. D. D. also thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). Authors from UV thank the University of Valencia (UV-INV-AE16-484416 project) and MINECO (MAT2017-84118-C2-1-R project) for funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fe2O3 supported on hollow micro/mesospheres silica for the catalytic partial oxidation of H2S to sulfur

  • Cecilia, J.A.
  • Marques Correia, L.
  • Rodríguez-Castellón, E.
  • Silveira Vieira, R.
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] A family of Fe-based catalysts supported hollow silica mesospheres has been synthesized and tested in the catalytic partial oxidation of H2S to elemental sulfur at 170.180 degrees C, atmospheric pressure and under 300 min of time-on-stream. The characterization of the synthesized catalysts by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), diffuse reflectance UV-vis spectra (DRS), H-2-termoprogrammed reduction (H-2-TPR), N-2 adsorption-desorption at -196 degrees C and X-ray photoelectron spectroscopy (XPS) reveals the formation of a catalytic system with high micro- and mesoporosity with high dispersion of the Fe2O3 species. The catalytic results reported high activity in the selective oxidation of H2S, reaching a highest conversion value close to 94% with a selectivity towards elemental sulfur of 98% after 300 min of time on stream (TOS) at 180 degrees C for the HMS-10Fe catalyst. The comparison of Fe-containing HMS (10 wt% of iron loading) with other SiO2-based supports, as a fumed silica (Cab-osil) or a mesoporous silica (SBA-15), presents different H2S conversion values, following the next trend: HMS-10Fe > SBA-10Fe > Cab-10Fe. These results suggest that the use of a support with a narrow pore tend to facilitate the iron dispersion favoring higher conversion rates., The authors wish to acknowledge the financial support provided by the Ministry of Economy and Competitiveness (Spain) (MINECO) CTQ2015-68951-C1-3R y CTQ2015-68951-C3-3R, Junta de Andalucia (Spain) P12-RNM 1565 and FEDER funds. In addition, the authors also thank Fundacao Cearense de Apoio ao Desenvolvimento Cientifico e Tecnologico (FUNCAP) by the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior (CAPES) - Processo: PDSE 99999.002602/2014-08.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Redox and Catalytic Properties of Promoted NiO Catalysts for the Oxidative Dehydrogenation of Ethane

  • Delgado-Muñoz, Daniel
  • SOLSONA ESPRIU, BENJAMIN EDUARDO
  • Ykrelef, A.
  • Rodriguez-Gomez, A.
  • Caballero, A.
  • Rodríguez-Aguado, E.
  • Rodriguez-Castellón, E.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] NiO and metal-promoted NiO catalysts (M-NiO, with a M/(M+Ni) atomic ratio of 0.08, with M = Nb, Sn, or La) have been prepared, tested in the oxidative dehydrogenation (ODH) of ethane, and characterized by means of XRD, TPR, HRTEM, Raman, XPS, and in situ XAS (using H-2/He, air or C2H6/He mixtures). The selectivity to ethylene during the ODH of ethane decreases according to the following trend: Nb NiO Sn NiO > La NiO > NiO, whereas the catalyst reducibility (determined by both TPR and XAS using H-2/He mixtures) shows the opposite trend. However, different reducibility and catalytic behavior in the absence of oxygen (ethane/He mixtures) have been observed, especially when comparing Nb- and Sn-promoted NiO samples. These differences can be ascribed mainly to a different phase distribution of the promoter. The results presented here are discussed in terms of the nature of active and selective sites for ODH of ethane in selective and unselective catalysts, but also the role of promoters and the importance of their phase distribution., The authors would like to acknowledge the DGICYT in Spain CTQ2012-37925-C03-2, CTQ2015-68951-C3-1-R, and CTQ2015-68951-C3-3-R. Authors thank European Synchrotron Radiation Facility, ESRF (Project CH-4512; BM25-SpLine Beamlime). Authors from ITQ also thank Project SEV-2016-0683 for financial support. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). B.S. also thanks UV-INV-AE16-484416. Finally, the authors thank the Electron Microscopy Service of Universitat Politecnica de Valencia for their support.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

CH4 and CO2 Adsorption Study in ZIF-8 and Al-BDC MOFs

  • Autié Castro, Giselle
  • Jardim, Erika de Oliveira
  • Reguera, Edilso
  • Vilarrasa-García, Enrique
  • Rodríguez-Castellón, Enrique
  • Cavalcante Jr, Célio L.
CH4 and CO2 adsorption capacity at 25, 50 and 75°C was evaluated in two metal-organic frameworks: Al-BDC and ZIF-8, the later with zeolite topology. Adsorption experiments were carried out under static conditions using a gravimetric suspension balance until 40 bar of pressure. Adsorption isotherms of type I were obtained for both materials showing high adsorption capacity values. ZIF-8 exhibited the higher uptake value for both CH4 and CO2 (4.9 and 8.5 mmol g-1, respectively). The Toth equilibrium model was used to fit experimental isotherms in order to obtain qm (maximum adsorption capacity) and t (related to energetical heterogeneity of the surface). Isosteric heats of adsorption were also calculated by Clausius-Clapeyron equation.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Total oxidation of propane using CeO2 and CuO-CeO2 catalysts prepared using templates of different nature

  • Solsona, Benjamín
  • Sanchis, Rut
  • Dejoz, Ana
  • García Martínez, Tomás
  • Ruiz-Rodríguez, Lidia
  • López Nieto, José Manuel
  • Cecilia, Juan Antonio
  • Rodríguez-Castellón, Enrique
Several CeO<sub>2</sub> and CuO-CeO<sub>2</sub> catalysts were prepared using different methods, i.e., a homogeneous precipitation with urea, a nanocasting route using CMK-3 carbon as a hard template and a sol–gel process using Poly(methyl methacrylate) (PMMA) polymer as a soft template, and tested in the total oxidation of propane. The catalysts were characterized by a number of physicochemical techniques (XRD, N<sub>2</sub> adsorption, TPR, XPS, Raman spectroscopy) showing distinct characteristics. For each series, Cu-Ce-O catalysts with low Cu-loadings (5 wt % CuO) showed the highest activity, higher than those samples either without copper or with high Cu-loading (13 wt % CuO). The incorporation of copper leads to an increase of the concentration of bulk defects but if the Cu-loading is too high the surface area drastically falls. The highest activity in the total oxidation of propane was achieved by Cu-containing ceria catalysts synthesized using a polymer as a template, as this method yields high surface area materials. The surface area and the number of bulk/sub-surface defects of the ceria seem to be the main properties determining the catalytic activity., The authors would like to acknowledge the DGICYT in Spain CTQ2012-37925-C03-2, CTQ2015-68951-C3-1-R, CTQ2015-68951-C3-3-R. Authors from ITQ also thank Project SEV-2012-0267 for financial support. B.S, R.S and A.M.D also thank UV-INV-AE16-484416.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Immobilization of lipase a from candida antarctica onto chitosan-coated magnetic nanoparticles

  • Monteiro, Rodolpho R. C.
  • Lima, Paula J. M.
  • Pinheiro, Bruna B.
  • Freire, Tiago M.
  • Dutra, Lillian M. U.
  • Fechine, Pierre B. A.
  • Gonçalves, Luciana R. B.
  • de Souza, Maria C. M.
  • Santos, José C. S. dos
  • Fernández-Lafuente, Roberto
In this communication, lipase A from Candida antarctica (CALA) was immobilized by covalent bonding on magnetic nanoparticles coated with chitosan and activated with glutaraldehyde, labelled CALA-MNP, (immobilization parameters: 84.1% ± 1.0 for immobilization yield and 208.0 ± 3.0 U/g ± 1.1 for derivative activity). CALA-MNP biocatalyst was characterized by X-ray Powder Diffraction (XRPD), Fourier Transform Infrared (FTIR) spectroscopy, Thermogravimetry (TG) and Scanning Electron Microscope (SEM), proving the incorporation of magnetite and the immobilization of CALA in the chitosan matrix. Besides, the immobilized biocatalyst showed a half-life 8–11 times higher than that of the soluble enzyme at pH 5–9. CALA showed the highest activity at pH 7, while CALA-MNP presented the highest activity at pH 10. The immobilized enzyme was more active than the free enzyme at all studied pH values, except pH 7., This research was funded by Fundação Cearense de Apoio ao Desenvolvimento Científico e Tecnológico (FUNCAP), grant numbers BP3-0139-00005.01.00/18 and PNE-0112-00048.01.00/16, Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq), grant numbers 422942/2016-2, 409058/2015-5 and 408790/2016-4, Coordenação de Aperfeiçoamento de Ensino Superior (CAPES-Finance Code 001) and MICIU, grant number CTQ2015-68951-C3-3-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Redox and catalytic properties of promoted NiO catalysts for the oxidative dehydrogenation of ethane

  • Delgado Muñoz, Daniel
  • Solsona, B.
  • Ykrelef, A.
  • Rodríguez-Gómez, A.
  • Caballero, Alfonso
  • Rodríguez-Aguado, E.
  • Rodríguez-Castellón, E.
  • López Nieto, José Manuel
NiO and metal-promoted NiO catalysts (M-NiO, with a M/(M+Ni) atomic ratio of 0.08, with M = Nb, Sn, or La) have been prepared, tested in the oxidative dehydrogenation (ODH) of ethane, and characterized by means of XRD, TPR, HRTEM, Raman, XPS, and in situ XAS (using H/He, air or CH/He mixtures). The selectivity to ethylene during the ODH of ethane decreases according to the following trend: Nb-NiO ≈ Sn-NiO > La-NiO > NiO, whereas the catalyst reducibility (determined by both TPR and XAS using H/He mixtures) shows the opposite trend. However, different reducibility and catalytic behavior in the absence of oxygen (ethane/He mixtures) have been observed, especially when comparing Nb- and Sn-promoted NiO samples. These differences can be ascribed mainly to a different phase distribution of the promoter. The results presented here are discussed in terms of the nature of active and selective sites for ODH of ethane in selective and unselective catalysts, but also the role of promoters and the importance of their phase distribution., The authors would like to acknowledge the DGICYT in Spain CTQ2012-37925-C03-2, CTQ2015-68951-C3-1-R, and CTQ2015-68951-C3-3-R. Authors thank European Synchrotron Radiation Facility, ESRF (Project CH-4512; BM25-SpLine Beamlime). Authors from ITQ also thank Project SEV-2016-0683 for financial support. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). B.S. also thanks UV-INV-AE16-484416. Finally, the authors thank the Electron Microscopy Service of Universitat Politècnica de València for their support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ethyl butyrate synthesis catalyzed by lipases A and B from candida antarctica immobilized onto magnetic nanoparticles. Improvement of biocatalysts’ performance under ultrasonic irradiation

  • Monteiro, Rodolpho R. C.
  • Neto, Davino M. Andrade
  • Fechine, Pierre B. A.
  • Lopes, Ada A. S.
  • Gonçalves, Luciana R. B.
  • Dos Santos, José C. S.
  • de Souza, Maria C. M.
  • Fernández-Lafuente, Roberto
The synthesis of ethyl butyrate catalyzed by lipases A (CALA) or B (CALB) from Candida antarctica immobilized onto magnetic nanoparticles (MNP), CALA-MNP and CALB-MNP, respectively, is hereby reported. MNPs were prepared by co-precipitation, functionalized with 3-aminopropyltriethoxysilane, activated with glutaraldehyde, and then used as support to immobilize either CALA or CALB (immobilization yield: 100 ± 1.2% and 57.6 ± 3.8%; biocatalysts activities: 198.3 ± 2.7 Up-NPB/g and 52.9 ± 1.7 Up-NPB/g for CALA-MNP and CALB-MNP, respectively). X-ray diffraction and Raman spectroscopy analysis indicated the production of a magnetic nanomaterial with a diameter of 13.0 nm, whereas Fourier-transform infrared spectroscopy indicated functionalization, activation and enzyme immobilization. To determine the optimum conditions for the synthesis, a four-variable Central Composite Design (CCD) (biocatalyst content, molar ratio, temperature and time) was performed. Under optimized conditions (1:1, 45 °C and 6 h), it was possible to achieve 99.2 ± 0.3% of conversion for CALA-MNP (10 mg) and 97.5 ± 0.8% for CALB-MNP (12.5 mg), which retained approximately 80% of their activity after 10 consecutive cycles of esterification. Under ultrasonic irradiation, similar conversions were achieved but at 4 h of incubation, demonstrating the efficiency of ultrasound technology in the enzymatic synthesis of esters., This research was funded by Fundação Cearense de Apoio ao Desenvolvimento Científico e Tecnológico (FUNCAP), grant numbers BP3-0139-00005.01.00/18 and PNE-0112-00048.01.00/16, Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq), grant numbers 422942/2016-2, 409058/2015-5 and 408790/2016-4, Coordenação de Aperfeiçoamento de Ensino Superior (CAPES-Finance Code 001) and MICIU, grant number CTQ2015-68951-C3-3-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Iron phosphides presenting different stoichiometry as nanocatalysts in the HDO of phenol

  • Rodríguez-Aguado, E.
  • Infantes-Molina, A.
  • Ballesteros-Plata, D.
  • Marco, J.F.
  • Moretti, E.
  • Finocchio, E.
  • Cecilia, Juan Antonio
  • Rodríguez-Castellón, E.
11 pags., 10 figs., 4 tabs., Iron phosphide catalysts supported on silica with an iron loading of 15 wt% were synthesized and studied in the hydrodeoxygenation (HDO) of phenol. The amount of phosphorus varied in order to obtain iron phosphides with different stoichiometry. Catalysts containing FeP, FeP and FeP phases were obtained. The textural and structural properties of the prepared catalysts were evaluated by using different experimental techniques such as N adsorption-desorption at -196 °C, X-ray diffraction (XRD), Mössbauer spectroscopy, high resolution transmission spectroscopy (HRTEM), infrared spectroscopy (IR) of adsorbed CO at low temperature, X-ray photoelectron microscopy (XPS) and NH thermoprogrammed desorption (NH-TPD). The catalytic activity was studied at 275 °C and at 15 and 5 bar of hydrogen pressure in the hydrodeoxygenation reaction of phenol. Characterization results evidenced that the initial P/Fe ratio employed in the synthesis not only governed the stoichiometry of the iron phosphide, but also the particle size, metallic surface exposure and acidity. The catalysts presenting unique phases were those presenting better activity in the HDO reaction of phenol. Moreover, FeP phase presented better results than FeP in terms of HDO conversion., We thanks to project CTQ2015-68951-C3-3R (Ministerio de Economíay Competitividad, Spain and FEDER Funds). A.I.M. thanks the Ministryof Economy and Competitiveness for a Ramon y Cajal contract (RyC201We5-17870).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Total oxidation of propane using CeO2 and CuO-CeO2 catalysts prepared using templates of different nature

  • Solsona, B.
  • Sanchis, R.
  • Dejoz, A. M.
  • García, T.
  • Ruiz-Rodríguez, L.
  • López Nieto, J. M.
  • Cecilia, J. A.
  • Rodríguez-Castellón, E.
Several CeO2 and CuO-CeO2 catalysts were prepared using different methods, i.e., a homogeneous precipitation with urea, a nanocasting route using CMK-3 carbon as a hard template and a sol–gel process using Poly(methyl methacrylate) (PMMA) polymer as a soft template, and tested in the total oxidation of propane. The catalysts were characterized by a number of physicochemical techniques (XRD, N2 adsorption, TPR, XPS, Raman spectroscopy) showing distinct characteristics. For each series, Cu-Ce-O catalysts with low Cu-loadings (5 wt % CuO) showed the highest activity, higher than those samples either without copper or with high Cu-loading (13 wt % CuO). The incorporation of copper leads to an increase of the concentration of bulk defects but if the Cu-loading is too high the surface area drastically falls. The highest activity in the total oxidation of propane was achieved by Cu-containing ceria catalysts synthesized using a polymer as a template, as this method yields high surface area materials. The surface area and the number of bulk/sub-surface defects of the ceria seem to be the main properties determining the catalytic activity.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhanced electrochemical response of carbon quantum dot modified electrodes

  • Algarra, Manuel|||0000-0003-2410-8430
  • González-Calabuig, Andreu|||0000-0002-6325-138X
  • Radotić, Ksenija
  • Mutavdzic, D.
  • Ania, Conchi|||0000-0001-9517-8132
  • Lázaro-Martínez, Juan Manuel M.|||0000-0002-7189-6874
  • Jiménez-Jiménez, José|||0000-0002-9727-0570
  • Rodríguez-Castellón, Enrique|||0000-0003-4751-1767
  • Valle, Manel del|||0000-0002-1032-8611
A glassy carbon electrode (GCE) was surface-modified with carbon quantum dots (CQDs) and applied for the effective enhancement of the electrochemical signal for dopamine and uric acid determination. CQDs were prepared from graphite by a green modification of the Hummers method. They were characterized by FTIR-ATR, XPS, solid-state NMR, fluorescence and Raman spectroscopies. TPD-MS analysis was applied to characterize the functionalization of the surface. The CQDs were assembled on the glassy carbon electrode by adsorption because of the large number of carboxy groups on their surface warrants effective adsorption. The modified GCE exhibits a sensitivity that is almost 10 times better than of the bare GCE. The lower limits of detection are 1.3 μM for uric acid and 2.7 μM for dopamine.