Skip to main content

MATERIALES COMPUESTOS POROSOS 3D OBTENIDOS POR EL METODO DE AUTOENSAMBLAJE DE GRAFENO Y POLIMERO PARA LA CAPTURA DE CO2 SELECTIVA

CTQ2016-80886-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DEL PAIS VASCO EUSKAL HERRIKO UNIBERTSITATEA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Confinement effects in the step-growth polymerization within AAO templates and modeling

  • Sanz, Belén
  • Ballard, Nicholas
  • Marcos-Fernández, Ángel
  • Asua, José M.
  • Mijangos, Carmen
Nanostructured polyurethanes have attracted substantial interest for the generation of ¿smart¿ surfaces, but step-growth polymerization at the nanoscale has scarcely been reported. In this work, the synthesis of polyurethanes by step-growth polymerization in the nanocavities of anodized aluminum oxide (AAO) templates is studied, finding that the kinetics of the reaction was faster than in bulk, while the molecular weight and the dispersity were reduced. A mathematical model was developed to explain these differences, taking into account the chemical and physical interactions encountered in the reaction between the monomers (diisocyanate and dialcohol) for nanoconfined in AAO and bulk. In nanoconfinement, the polyaddition is catalyzed by hydroxyl groups on the pore wall, resulting in an increase in the rate of polymerization during the early stages of the reaction. At high conversions, the limited diffusion of the polymer chains results in a slower polymerization and a dispersity lower than that expected from bulk., Ministerio de Economía y Competitividad (MAT2014-53437-C2- 1P, MAT2017-83014-C2-2-P and CTQ2016-80886R) and IKERBASQUE foundation, University of Basque Country (UFI/11/56), Basque Government (GVIT 999-16, postdoctoral fellowship and Etortek Nanoiker IE11-304) are gratefully acknowledged for their financial support, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Insights into the network structure of cross-linked polymers synthesized via miniemulsion nitroxide-mediated radical polymerization

  • Mehravar, Ehsan
  • Agirre, Amaia
  • Ballard, Nicholas
  • Es, Steven van
  • Arbe, Arantxa
  • Leiza, Jose R.
  • Asua, José M.
The effect of reversible-deactivation radical polymerization on the structure of the network formed by copolymerization of mono- and divinyl monomers is studied. The nitroxide-mediated radical copolymerization (NMP) of butyl methacrylate and ethylene glycol dimethacrylate, initiated with the alkoxyamine 3-(((2-cyanopropan-2-yl)oxy)cyclohexylamino)-2,2-dimethyl-3-phenylpropanenitrile (Dispolreg 007) in an aqueous miniemulsion was used as a case study. Combination of asymmetric-flow field-flow fractionation and small-angle X-ray scattering clearly showed that NMP led to a more homogeneous network structure formed by regions of relatively open networks connected with short polymer chain segments, whereas that of the polymer formed by free radical polymerization consists of densely cross-linked regions linked by long polymer chain portions., Diputacion Foral de Gipuzkoa, University of Basque Country UPV/EHU (UFI 11/56), Basque Government (Grants GVIT373-10 and GVIT654-13), and MINECO (Grants CTQ2016-80886-R, CTQ2017-87841-R, and MAT2015-63704-P) are gratefully acknowledged for their financial support. N.B. acknowledges the financial support obtained through the postdoctoral fellowship Juan de la Cierva - Incorporacion (Grant IJCI-2016-28442) from the Ministry of Economy and Competitiveness of Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microwave irradiation versus conventional heating assisted free-radical copolymerization in solution

  • Pérez-Martínez, Bertha T.
  • Aboudzadeh, M. Ali
  • Schubert, Ulrich S.
  • Leiza, Jose R.
  • Tomovska, Radmila
Microwave (MW) irradiation has arisen as a more sustainable alternative to conventional heating (CH) for chemical reactions because it provides non-contact, volumetric equal and fast heating. However, in free-radical polymerization, the MW effect is still quite controversial, probably due to the lack of reliable, comparable experimental data of both CH and MW assisted polymerization processes. In this work, taking advantage of technically superior MW reactor design, similar temperature profiles and conditions of CH and MW assisted polymerization reactions were enabled. Copolymerization of various monomer couples with different polarity and dielectric properties was studied in solution of different organic solvents in the presence of different initiators. As a result, it was concluded that the interaction of the reaction components with the MW irradiation is essential and will determine if any effect of MW irradiation on the reaction and products occurs. On the contrary to some reported studies, for the typical monomers used in free radical polymerization studied here (acrylates, methacrylates, styrene) no difference in reaction rates, copolymer composition and properties were observed between the MWH and CH processes, independently of the solvent and initiator used. However, in the case of the presence of an organometallic monomer within the monomer couple, an observable reaction rate enhancement was obtained under MW irradiation, along with changes in the reactivity ratios and differences in the copolymer composition. This effect is considered a specific microwave effect, for the first time demonstrated in free-radical solution polymerization process and was explained by the principles of selective heating of the organometallic reaction components in solution., The authors gratefully acknowledge the financial support by NATO (SfP project G4255), Spanish Government (CTQ2016-80886-R), and Basque Government (GV IT999-16). Bertha Pérez-Martínez acknowledges the PhD fellowship No. 410922 provided by The National Council of Science and Technology (CONACyT-México)., Peer reviewed