Skip to main content

REDES METAL-ORGANICAS DE INSPIRACION BIOLOGICA: COMPLEJIDAD QUIMICA EN ENTORNOS DE PORO VERSATILES

CTQ2017-83486-P

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Unlocking mixed oxides with unprecedented stoichiometries from heterometallic metal-organic frameworks for the catalytic hydrogenation of CO2

  • Castells-Gil, Javier
  • Ould-Chikh, Samy
  • Ramírez, Adrian
  • Ahmad, Rafia
  • Rodríguez Gómez, Alberto
  • Garzón-Tovar, Luis
  • Telalovic, Selvedin
  • Liu, Lingmei
  • Genovese, Alessandro
  • Padial, Natalia M.
  • Aguilar-Tapia, Antonio
  • Bordet, Pierre
  • Cavallo, Luigi
  • Martí-Gastaldo, Carlos
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] Their complex surface chemistry and high oxygen lattice mobilities place mixed-metal oxides among the most important families of materials. Modulation of stoichiometry in mixed-metal oxides has been shown to be a very powerful tool for tuning optical and catalytic properties. However, accessing different stoichiometries is not always synthetically possible. Here, we show that the thermal decomposition of the recently reported metal-organic framework MUV-101(Fe, Ti) results in the formation of carbon-supported titanomaghemite nanoparticles with an unprecedented Fe/Ti ratio close to 2, not achievable by soft-chemistry routes. The resulting titanomaghemite phase displays outstanding catalytic activity for the production of CO from CO2 via the reverse water-gas shift (RWGS) reaction with CO selectivity values of ca. 100% and no signs of deactivation after several days on stream. Theoretical calculations suggest that the reaction proceeds through the formation of COOH¿ species, favoring in this way CO over other byproducts., Daliang Zhang is acknowledged for his help with Digital Micrograph scripts used to acquire image stacks during our in situ TEM experiments. This work was supported by the European Union (ERC Stg Chem-fs-MOF 714122) and the Spanish government (CTQ2017-83486-P and CEX2019-000919-M). N.M.P. thanks the European Union for a Marie Sklodowska-Curie Global Fellowship (H2020-MSCA-IF-2016-GF749359-EnanSET).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Epitaxial Thin-Film vs Single Crystal Growth of 2D Hofmann-Type Iron(II) Materials: A Comparative Assessment of their Bi-Stable Spin Crossover Properties

  • Bartual-Murgui, Carlos
  • Rubio-Giménez, Victor
  • Meneses-Sánchez, Manuel
  • Valverde-Muñoz, Francisco Javier
  • Tatay, Sergio
  • Marti-Gastaldo, Carlos
  • Real, José Antonio
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] Integration of the ON-OFF cooperative spin crossover (SCO) properties of FeII coordination polymers as components of electronic and/or spintronic devices is currently an area of great interest for potential applications. This requires the selection and growth of thin films of the appropriate material onto selected substrates. In this context, two new series of cooperative SCO two-dimensional FeII coordination polymers of the Hofmann-type formulated {FeII(Pym)2[MII(CN)4]·xH2O}n and {FeII(Isoq)2[MII(CN)4]}n (Pym = pyrimidine, Isoq = isoquinoline; MII = Ni, Pd, Pt) have been synthesized, characterized, and the corresponding Pt derivatives selected for fabrication of thin films by liquid-phase epitaxy (LPE). At ambient pressure, variable-temperature single-crystal X-ray diffraction, magnetic, and calorimetric studies of the Pt and Pd microcrystalline materials of both series display strong cooperative thermal induced SCO properties. In contrast, this property is only observed for higher pressures in the Ni derivatives. The SCO behavior of the {FeII(L)2[PtII(CN)4]}n thin films (L = Pym, Isoq) were monitored by magnetization measurements in a SQUID magnetometer and compared with the homologous samples of the previously reported isostructural {FeII(Py)2[PtII(CN)4]}n (Py = pyridine). Application of the theory of regular solutions to the SCO of the three derivatives allowed us to evaluate the effect on the characteristic SCO temperatures and the hysteresis, as well as the associated thermodynamic parameters when moving from microcrystalline bulk solids to nanometric thin films., We thank the Spanish Ministerio de Economia y Competitividad (MINECO) and FEDER funds (CTQ2016-78341-P, CTQ2017-83486-P, RTI2018-098568-A-100 and Unidad de Excelencia Maria de Maeztu MDM-2015-0538), Generalitat Valenciana (PROMETEO/2016/147) and EU Framework FET-OPEN project COSMICS (grant agreement 766726) and ERC Stg Chem-fs-MOF (714122). S.T. thanks the Ramon y Cajal Fellowship (RYC-2016-19817). V.R.-G. thanks the Spanish Ministerio de Ciencia, Innovacion y Universidades (MCIU) for his FPU (FPU13/03203) predoctoral fellowship. FJVM and MMS thank MINECO for a predoctoral FPI grant. The atomic spectroscopy section of SCSIE (Universitat deValencia) is gratefully acknowledged for the Elemental CHNSO analysis. We also thank Francisco Palazon for his assistance with GIXRD measurements and Alejandra SorianoPortillo and Angel Lopez-Muñoz for their technical support
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

De novo synthesis of mesoporous photoactive titanium(iv)-organic frameworks with MIL-100 topology

  • Castells-Gil, Javier
  • Padial, Natalia M.
  • Almora-Barrios, Neyvis
  • da Silva, Ivan
  • Mateo-Mateo, Diego
  • Martí-Gastaldo, Carlos
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Most developments in the chemistry and applications of metal-organic frameworks (MOFs) have been made possible thanks to the value of reticular chemistry in guiding the unlimited combination of organic connectors and secondary building units (SBUs) into targeted architectures. However, the development of new titanium-frameworks still remains limited by the difficulties in controlling the formation of persistent Ti-SBUs with predetermined directionality amenable to the isoreticular approach. Here we report the synthesis of a mesoporous Ti-MOF displaying a MIL-100 topology. MIL-100(Ti) combines excellent chemical stability and mesoporosity, intrinsic to this archetypical family of porous materials, with photoactive Ti-3((3)-O) metal-oxo clusters. By using high-throughput synthetic methodologies, we have confirmed that the formation of this SBU is thermodynamically favored as it is not strictly dependent on the metal precursor of choice and can be regarded as an adequate building block to control the design of new Ti-MOF architectures. We are confident that the addition of a mesoporous solid to the small number of crystalline, porous titanium-frameworks available will be a valuable asset to accelerate the development of new porous photocatalysts without the pore size limitations currently imposed by the microporous materials available., This work was supported by the EU (ERC Stg Chem-fs-MOF 714122) and Spanish MINECO (MDM-2015-0538 & CTQ2017-83486-P). C. M.-G. and J. C.-G. thank the Spanish MINECO for a Ramon y Cajal Fellowship (RYC-2012-10894) and FPI Scholarship (CTQ2014-59209-P). N. M. P. thanks the European Union for a Marie Skodowska-Curie Global Fellowship (H2020-MSCA-IF-2016-GF-749359-EnanSET). We thank the ISIS Facility for the access to synchrotron radiation, BSC-RES and Prof. Enrique Orti for computational resources and Belen Lerma-Berlanga for technical help.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Linker Distribution in the Photocatalytic Activity of Multivariate Mesoporous Crystals

  • Lerma-Berlanga, Belen
  • Ganivet, Carolina R.
  • Almora-Barrios, Neyvis
  • Tatay, Sergio
  • Peng, Yong
  • Fabelo, Oscar
  • Gonzalez-Platas, Javier
  • Padial, Natalia M.
  • Marti-Gastaldo, Carlos
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The use of Metal-Organic Frameworks as crystalline matrices for the synthesis of multiple component or multivariate solids by the combination of different linkers into a single material has emerged as a versatile route to tailor the properties of single-component phases or even access new functions. This approach is particularly relevant for Zr-6-MOFs due to the synthetic flexibility of this inorganic node. However, the majority of materials are isolated as polycrystalline solids, which are not ideal to decipher the spatial arrangement of parent and exchanged linkers for the formation of homogeneous structures or heterogeneous domains across the solid. Here we use high-throughput methodologies to optimize the synthesis of single crystals of UiO-68 and UiO-68-TZDC, a photoactive analogue based on a tetrazine dicarboxylic derivative. The analysis of the single linker phases reveals the necessity of combining both linkers to produce multivariate frameworks that combine efficient light sensitization, chemical stability, and porosity, all relevant to photocatalysis. We use solvent-assisted linker exchange reactions to produce a family of UiO-68-TZDC(%) binary frameworks, which respect the integrity and morphology of the original crystals. Our results suggest that the concentration of TZDC in solution and the reaction time control the distribution of this linker in the sibling crystals for a uniform mixture or the formation of core-shell domains. We also demonstrate how the possibility of generating an asymmetric distribution of both linkers has a negligible effect on the electronic structure and optical band gap of the solids but controls their performance for drastic changes in the photocatalytic activity toward proton or methyl viologen reduction., This work was supported by the EU (ERC Stg Chem-fs-MOF 714122) and Spanish government (CTQ2017-83486-P, RTI2018-098568-A-I00, RYC-2016-1981, CEX2019-000919M, PID2019-106383GB-C44/AEI/10.13039/501100011033 and RTI2018-098568-A-I00). B.L.-B. thanks the Spanish government for a FPU (FPU16/04162). S.T. thanks the Spanish government for a Ramo ' n y Cajal Fellowship (RYC2016-60719817). N.M.P. thanks the European Union for a Marie Sklodowska-Curie Global Fellowship (H2020-MSCAIF-2016-GF-749359-EnanSET). J.G.P. thanks to the SIDIX at Servicios Generales de Apoyo a la Investigacion (SEGAI) at La Laguna University. We also thank BSC-RES for computational resources (QS-2020-2-0024) and the University of Valencia for research facilities (Tirant and NANBIOSIS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Chemical Engineering of Photoactivity in Heterometallic Titanium-Organic Frameworks by Metal Doping

  • Castells-Gil, Javier
  • Padial, Natalia M.
  • Almora-Barrios, Neyvis
  • Ruiz-Salvador, A. Rabdel
  • Gonzalez-Platas, Javier
  • Marti-Gastaldo, Carlos
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] We report a new family of titanium-organic frameworks that enlarges the limited number of crystalline, porous materials available for this metal. They are chemically robust and can be prepared as single crystals at multi-gram scale from multiple precursors. Their heterometallic structure enables engineering of their photoactivity by metal doping rather than by linker functionalization. Compared to other methodologies based on the post-synthetic metallation of MOFs, our approach is well-fitted for controlling the positioning of dopants at an atomic level to gain more precise control over the band-gap and electronic properties of the porous solid. Changes in the band-gap are also rationalized with computational modelling and experimentally confirmed by photocatalytic H-2 production., This work was supported by the EU (ERC Stg Chem-fs-MOF 714122) and Spanish MINECO (MDM-2015-0538, MAT2016-75586-C4-4-P & CTQ2017-83486-P). C.M.-G. and J.C.-G. thank the Spanish MINECO for a Ramon y Cajal Fellowship and FPI Scholarship (CTQ2014-59209-P), respectively. N.M.P. thanks the Junta de Andalucia for post-doctoral fellowship (P10-FQM-6050). BSC-RES and UG-Alhambra are acknowledged for the computational resources and F. Lloret for helpful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Selective Implantation of Diamines for Cooperative Catalysis in Isoreticular Heterometallic Titanium-Organic Frameworks

  • López-Maya, Elena
  • Padial, Natalia M.
  • Castells-Gil, Javier
  • Ganivet, Carolina R.
  • Rubio-Gaspar, Ana
  • García Cirujano, Francisco
  • Almora-Barrios, Neyvis
  • Tatay, Sergio
  • Marti-Gastaldo, Carlos
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] We introduce the first example of isoreticular titanium-organic frameworks, MUV-10 and MUV-12, to show how the different affinity of hard Ti(IV) and soft Ca(II) metal sites can be used to direct selective grafting of amines. This enables the combination of Lewis acid titanium centers and available -NH, sites in two sizeable pores for cooperative cycloaddition of CO2 to epoxides at room temperature and atmospheric pressure. The selective grafting of molecules to heterometallic clusters adds up to the pool of methodologies available for controlling the positioning and distribution of chemical functions in precise positions of the framework required for definitive control of pore chemistry., This work was supported by the EU (ERC Stg Chem-fs-MOF 714122) and Spanish Government (CTQ2017-83486-P, RTI2018-098568-A-I00 & CEX2019-000919-M). E.L.-M. and S.T. thanks the Spanish Government for their Juan de la Cierva Fellowship (FJCI-2017-32956) and Ramon y Cajal contract (RYC-2016-1981), respectively. A.R.G. acknowledges funding from Generalitat Valencia (ACIF/2020/090)and Fondo Social Europeo. N.M.P. thanks the European Union for a Marie Sklodowska-Curie Global Fellowship (H2020MSCA-IF-2016-GF-749359-EnanSET) and to the "2020 Postdoctoral Junior Leader-Retaining Fellowship, la Caixa Foundation (ID 100010434 and fellowship code LCF/BQ/PR20/11770014)". F.G.C. acknowledges the support of a fellowship from "la Caixa" Foundation (ID 100010434 and the fellowship code LCF/BQ/PI19/11690011). S.N. thanks financial support by the Ministerio de Ciencia, Innovacion y Universidades (RTI 2018-099482-A-I00 project), Fundacion Ramon Areces (XVIII Concurso Nacional para la Adjudicacion de Ayudas a la Investigacion en Ciencias de la Vida y de la Materia, 2016) and Agencia Valenciana de la Innovacion (AVI-GVA, Carboagua project, INNEST/2020/111).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Heterometallic Titanium-Organic Frameworks by Metal-Induced Dynamic Topological Transformations

  • Padial, Natalia M.
  • Lerma Berlanga, Belen
  • Almora Barrios, Neyvis
  • Castells Gil, Javier
  • Da Silva, Iván
  • Mata Fernández, María de la
  • Molina Rubio, Sergio Ignacio
  • Hernández Saz, Jesús
  • Platero Plats, Ana E.
  • Tatay, Sergio
  • Martí Gastaldo, Carlos
Reticular chemistry has boosted the design of thousands of metal and covalent organic frameworks for unlimited chemical compositions, structures, and sizable porosities. The ability to generate porous materials at will on the basis of geometrical design concepts is responsible for the rapid growth of the field and the increasing number of applications derived. Despite their promising features, the synthesis of targeted homo- and heterometallic titanium-organic frameworks amenable to these principles is relentlessly limited by the high reactivity of this metal in solution that impedes the controlled assembly of titanium molecular clusters. We describe an unprecedented methodology for the synthesis of heterometallic titanium frameworks by metal-exchange reactions of MOF crystals at temperatures below those conventionally used in solvothermal synthesis. The combination of hard (titanium) and soft (calcium) metals in the heterometallic nodes of MUV-10(Ca) enables controlled metal exchange in soft positions for the generation of heterometallic secondary building units (SBUs) with variable nuclearity, controlled by the metal incorporated. The structural information encoded in the newly formed SBUs drives an MOF-to-MOF conversion into bipartite nets compatible with the connectivity of the organic linker originally present in the crystal. Our simulations show that this transformation has a thermodynamic origin and is controlled by the terminations of the (111) surfaces of the crystal. The reaction of MUV-10(Ca) with first-row transition metals permits the production of crystals of MUV-101(Fe,Co,Ni,Zn) and MUV-102(Cu), heterometallic titanium MOFs isostructural with archetypical solids such as MIL-100 and HKUST. In comparison to de novo synthesis, this metal-induced topological transformation provides control over the formation of hierarchical micro-/mesopore structures at different reaction times and enables the formation of heterometallic titanium MOFs not accessible under solvothermal conditions at high temperature, thus opening the door for the isolation of additional titanium heterometallic phases not linked exclusively to trimesate linkers.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

De novo synthesis of mesoporous photoactive titanium(iv)-organic frameworks with MIL-100 topology

  • Castells-Gil, Javier
  • Padial, Natalia M.
  • Almora-Barrios, N.
  • Da Silva, Ivan
  • Mateo, Diego
  • Albero, J.
  • García Gómez, Hermenegildo
  • Martí-Gastaldo, Carlos
Most developments in the chemistry and applications of metal-organic frameworks (MOFs) have been made possible thanks to the value of reticular chemistry in guiding the unlimited combination of organic connectors and secondary building units (SBUs) into targeted architectures. However, the development of new titanium-frameworks still remains limited by the difficulties in controlling the formation of persistent Ti-SBUs with predetermined directionality amenable to the isoreticular approach. Here we report the synthesis of a mesoporous Ti-MOF displaying a MIL-100 topology. MIL-100(Ti) combines excellent chemical stability and mesoporosity, intrinsic to this archetypical family of porous materials, with photoactive Ti(μ-O) metal-oxo clusters. By using high-throughput synthetic methodologies, we have confirmed that the formation of this SBU is thermodynamically favored as it is not strictly dependent on the metal precursor of choice and can be regarded as an adequate building block to control the design of new Ti-MOF architectures. We are confident that the addition of a mesoporous solid to the small number of crystalline, porous titanium-frameworks available will be a valuable asset to accelerate the development of new porous photocatalysts without the pore size limitations currently imposed by the microporous materials available., This work was supported by the EU (ERC Stg Chem-fs-MOF 714122) and Spanish MINECO (MDM-2015-0538 & CTQ2017- 83486-P). C. M.-G. and J. C.-G. thank the Spanish MINECO for a Ramón y Cajal Fellowship (RYC-2012-10894) and FPI Scholarship (CTQ2014-59209-P). N. M. P. thanks the European Union for a Marie Skłodowska-Curie Global Fellowship (H2020-MSCAIF-2016-GF-749359-EnanSET). We thank the ISIS Facility for the access to synchrotron radiation, BSC-RES and Prof. Enrique Ort´ı for computational resources and Bel´en Lerma-Berlanga for technical help.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of Linker Distribution in the Photocatalytic Activity of Multivariate Mesoporous Crystals

  • Lerma-Berlanga, Belén
  • Ganivet, Carolina R.
  • Almora-Barrios, N.
  • Tatay, Sergio
  • Peng, Y.
  • Albero, J.
  • Fabelo, Oscar
  • González-Platas, Javier
  • García Gómez, Hermenegildo
  • Padial, Natalia M.
  • Martí-Gastaldo, Carlos
The use of Metal-Organic Frameworks as crystalline matrices for the synthesis of multiple component or multivariate solids by the combination of different linkers into a single material has emerged as a versatile route to tailor the properties of single-component phases or even access new functions. This approach is particularly relevant for Zr6-MOFs due to the synthetic flexibility of this inorganic node. However, the majority of materials are isolated as polycrystalline solids, which are not ideal to decipher the spatial arrangement of parent and exchanged linkers for the formation of homogeneous structures or heterogeneous domains across the solid. Here we use high-throughput methodologies to optimize the synthesis of single crystals of UiO-68 and UiO-68-TZDC, a photoactive analogue based on a tetrazine dicarboxylic derivative. The analysis of the single linker phases reveals the necessity of combining both linkers to produce multivariate frameworks that combine efficient light sensitization, chemical stability, and porosity, all relevant to photocatalysis. We use solvent-assisted linker exchange reactions to produce a family of UiO-68-TZDC% binary frameworks, which respect the integrity and morphology of the original crystals. Our results suggest that the concentration of TZDC in solution and the reaction time control the distribution of this linker in the sibling crystals for a uniform mixture or the formation of core-shell domains. We also demonstrate how the possibility of generating an asymmetric distribution of both linkers has a negligible effect on the electronic structure and optical band gap of the solids but controls their performance for drastic changes in the photocatalytic activity toward proton or methyl viologen reduction., This work was supported by the EU (ERC Stg Chem-fs-MOF 714122) and Spanish government (CTQ2017-83486-P, RTI2018-098568-A-I00, RYC-2016-1981, CEX2019-000919-M, PID2019-106383GB-C44/AEI/10.13039/501100011033 and RTI2018-098568-A-I00). B.L.-B. thanks the Spanish government for a FPU (FPU16/04162). S.T. thanks the Spanish government for a Ramón y Cajal Fellowship (RYC-2016-60719817). N.M.P. thanks the European Union for a Marie Skłodowska-Curie Global Fellowship (H2020-MSCA-IF-2016-GF-749359-EnanSET). J.G.P. thanks to the SIDIX at Servicios Generales de Apoyo a la Investigación (SEGAI) at La Laguna University. We also thank BSC-RES for computational resources (QS-2020-2-0024) and the University of Valencia for research facilities (Tirant and NANBIOSIS)., Peer reviewed