Skip to main content

O: DESARROLLO DE CATALIZADORES Y PROCESOS PARA LA OBTENCION DE COMPUESTOS ORGANO-OXIGENADOS Y AROMATICOS DE INTERES INDUSTRIAL A PARTIR DE BIOMOLECULAS PLATAFORMA

CTQ2017-89443-C3-2-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE OVIEDO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimization of Cu-Ni-Mn-catalysts for the conversion of ethanol to butanol

  • López-Olmos, Cristina
  • Guerrero-Ruiz, Antonio
  • Rodríguez-Ramos, Inmaculada
[EN] In the present study, the catalytic coupling of ethanol into 1-butanol through the Guerbet reaction was studied in a fixed bed reactor over different catalytic systems based on Cu and/or Ni as a hydrogenating/dehydrogenating components, and manganese oxide incorporating acid/base properties over a carbonaceous support, high surface area graphite (HSAG). The catalysts were prepared by wetness impregnation of the support with the corresponding metal nitrates and the resulting material was then reduced in-situ with hydrogen at 573 K for 1 h before reaction. The catalysts were characterized by X-ray diffraction (XRD), temperature-programmed reduction (TPR), specific surface area, NH temperature-programmed desorption, CO chemisorption, transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS). From all these techniques it can be deduced that the dimensions of the catalytic ingredients (Cu, Ni, Mn)are in the nanometric scale and homogeneously dispersed on the support. The reactions were performed in a continuous-flow fixed-bed reactor in gas phase with these bifunctional catalysts at 503 K and 50 bar using a stream of helium and ethanol. The bimetallic catalyst 2.5Cu2.5Ni-Mn/HSAG, treated in helium at 723 K prior reduction with hydrogen, exhibited the best catalytic performance in terms of 1-butanol selectivity (39%), presumably due to the synergetic effect of the weak strength acid sites and the strong base sites related to manganese oxide and the Cu-Ni nanoparticles., We acknowledge financial support from the Spanish Government (projects CTQ2017-89443-C3-2-R and CTQ2017-89443-C3-3-R). Also CLO thanks the MECD of Spain for a FPU predoctoral grant FPU16/05131.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of formaldehyde precursor and water inhibition in dimethoxymethane synthesis from methanol over acidic ion exchange resins: mechanism and kinetics

  • Peláez, Raquel
  • Marín, Pablo
  • Ordóñez, Salvador
A systematic comparison of the use of trioxane and depolymerized paraformaldehyde as formaldehyde precursors for the acetalization of methanol to dimethoxymethane was performed, using the acidic ion exchange resin, Amberlyst 15, as catalyst. Experiments were carried out under isothermal conditions in batch and continuous fixed-bed reactors. The influence of the main operating parameters, temperature (80–120 °C), space time (2.7–6.2 kg h m), and feed concentration (12–22 wt% of trioxane/formaldehyde, 2.5 wt% of water on methanol) on reaction rate and product selectivity were evaluated. When using trioxane as reactant, dimethoxymethane is the main reaction product, with more than 90% selectivity. The catalyst was found to be stable during all the experiments (more than 30 h on stream). However, water caused a reversible inhibitory effect on reaction rate, which can be accounted for by using a competitive adsorption model. A mechanistic kinetic model was proposed and validated using the experimental results. When trioxane is used as reactant, its decomposition to formaldehyde was found to be the rate-limiting step of the reaction mechanism (activation energy 73.1 kJ mol). This was confirmed with additional experiments, in which trioxane was replaced by depolymerized formaldehyde. In this case, reaction rate considerably increased. © 2021 The Authors. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd., This work has been financed by Research Projects of the Regional Government of Asturias (project reference GRUPIN-IDI/2018/000116) and the Spanish Ministry of Economy and Competitiveness (CTQ2017-89443-C3-2-R). Raquel Peláez acknowledges the Spanish Ministry of Economy and Competitiveness for the PhD grant that supports her research.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of substituents on partial photocatalytic oxidation of aromatic alcohols assisted by polymeric C3N4

  • Krivtsov, Igor V.
  • Ilkaeva, Marina
  • García-López, Elisa I.
  • Marcì, Giuseppe
  • Palmisano, Leonardo
  • Bartashevich, Ekaterina V.
  • Matveeva, Olga G.
  • Díaz, Eva
  • Ordóñez, Salvador
In the present work we scrutinize the effect of substituents in the phenyl ring of the benzyl alcohol on its photo-oxidation to the corresponding benzaldehyde driven by polymeric carbon nitride photocatalyst in aqueous medium. It has been established that electron donating (ED) substituents in para- and ortho-position with respect to the CH2OH-group promote the reactivity of the substrate without compromising the selectivity towards benzaldehyde formation, maintaining it in the range of 84–98 %, if compared to the unsubstituted molecule. The same observation is true for meta-substituted benzyl alcohol with an electron withdrawing (EW) group. On the other hand, the presence of ED-group in meta-position or EW-group in para-position with respect to the CH2OH-group reduces the reactivity as well as the selectivity towards the aldehyde production, resulting in the values of selectivity ranging from 40 to 80 %. Quantum chemical calculations have allowed to establish that the reactivity correlates with the positive charge on the benzylic carbon in benzyl alcohol cation intermediate, while the selectivity, most probably, is conditioned by a negative charge on the carbon atoms in the phenyl ring being a target for an electrophile attack. The modification of the polymeric C3N4 photocatalyst with H2O2 reduces the unselective benzyl alcohol oxidation, thus favouring the higher selectivity towards benzaldehyde production., This work is supported by Spanish MINECO ( MAT2016-78155-C2-1-R; CTQ2017-89443-C3-2-R) and Gobierno del Principado de Asturias (GRUPIN-ID2018-170; GRUPIN-ID2018-116). Theoretical modelling supported by the grants of Ministry of Education and Science of the Russian Federation No 4.1157.2017/4.6. IK acknowledges financial support from Ministry of Education and Science of the Russian Federation (grant No 4.9722.2017/8.9)., Peer reviewed