Skip to main content

INVESTIGACIÓN DE DISPERSORES AISLADOS PARA CONTROL DE RUIDO Y SU APLICACIÓN EN PANTALLAS ACÚSTICAS

DI-15-08100

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprogram Subprograma Estatal de Formación
Call Doctorados Industriales
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre BECSA SA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Normal incidence sound insulation provided by Sonic Crystal Acoustic Screens made from rigid scatterers - assessment of different simulation methods

  • Peiró-Torres, M.P.
  • Godinho, Luis M.
  • Amado-Mendes, Paulo
  • Vea-Folch, Francisco Jose
  • Ferri García, Marcelino
  • Redondo, Javier|||0000-0002-5507-7799
[EN] Sonic crystal acoustic screens have been in progressive research and development in the last two decades as a technical solution for mitigating traffic noise. Their behaviour is quite different from that observed in classical barriers, with the latter being based on physically blocking the direct sound propagation path (only allowing diffracted noise to reach sensible receivers), and sonic crystals providing attenuation efficiency based on the creation of "band-gaps" at specific frequency ranges, due to the Bragg's interference phenomenon. The distinct physical mechanisms of these two types of noise barriers complicates the use of classical simplified or even numerical models developed for traditional barriers to simulate and predict the attenuation performance of a sonic crystal, and alternative methods become thus required. In the acoustics scientific literature, several authors have proposed estimation and simulation methods based on different numerical tools to predict the sound insulation provided by these new noise abatement solutions. This paper presents a comparative evaluation of some of these methods, with emphasis on the assessment of their accuracy versus memory usage in order to determine which one is the most suitable for optimization methodologies in the design of new devices with improved acoustic performance., M.P.P.T is grateful for the support of pre-doctoral Grant by the "Ministerio de Ciencia, Innovacion y Universidades. Agencia Estatal de Investigacion" of Spain through reference no. DI-15-08100. This work has been supported by the Ministerio de Ciencia, Innovacion y Universidades, Spain, under grant RTI2018-096904-B-I00. This work was developed within the scope of the project with reference POCI-01-0247-FEDER-033691 - HLS -Hybrid Log Shield, supported by FEDER funds, through Portugal-2020 (PT2020) Programme, within the scope of SII&DT System, and by POCI Programme. This work was partly financed by FCT/MCTES through national funds (PIDDAC) under the R&D Unit Institute for Sustainability and Innovation in Structural Engineering (ISISE), under reference UIDB/04029/2020.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sonic Crystals Acoustic Screens and Diffusers

  • Peiró-Torres, María Del Pilar
  • Parrilla-Navarro, Manuel Jesús
  • Ferri García, Marcelino
  • Jose Maria Bravo|||0000-0002-8337-7385
  • Sánchez Pérez, Juan Vicente|||0000-0002-4473-8782
  • Redondo, Javier|||0000-0002-5507-7799
[EN] This article presents the use of advanced tools applied to the design of devices that can solve specific acoustic problems, improving the already existing devices based on classic technologies. Specifically, we have used two different configurations of a material called Sonic Crystals, which is formed by arrays of acoustic scatterers, to obtain acoustic screens with high diffusion properties by means of an optimization process. This design procedure has been carried out using a multiobjective evolutionary algorithm along to an acoustic simulation model developed with the numerical method called Finite Difference Time Domain. The results obtained are discussed in terms of both the acoustic performance and the robustness of the devices achieved., This work was partially supported by the Spanish "Ministerio de Economia y Competitividad" under the project TEC2015-68076-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Interferences in Locally Resonant Sonic Metamaterials Formed from Helmholtz Resonators

  • Peiró-Torres, María Del Pilar
  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Redondo, Javier|||0000-0002-5507-7799
  • Sánchez Pérez, Juan Vicente|||0000-0002-4473-8782
[EN] The emergence of materials artificially designed to control the transmission of waves, generally called metamaterials, has been a hot topic in the field of acoustics for several years. The design of these metamaterials is usually carried out by overlapping different wave control mechanisms. An example of this trend is the so-called Locally Resonant Sonic Materials, being one of them the Phononic Crystals with a local resonant structure. These metamaterials are formed by sets of isolated resonators in such a way that the control of the waves is carried out by resonances and by the existence of Bragg bandgaps, which appear due to the ordered distribution of the resonators. Their use is based on the creation of resonance peaks to form additional nontransmission bands mainly in the low frequency regime, usually below the first Bragg frequency. The coupling of both gaps has been made in some cases, but it is not always so. In this work, using a periodic structure formed by Helmholtz resonators, we report the existence of interferences between the resonances and the Bragg bandgaps when they are working in nearby frequency ranges, so that they prevent the coupling of both gaps. We explain their physical principles and present possible solutions to mitigate them. To this end, we have developed numerical models based on the finite element method, and the results have been verified by means of accurate experimental results obtained under controlled conditions. Published under license by AIP Publishing., M.P.P.T. is grateful for the support of pre-doctoral Grant by the "Ministerio de Economia y Competitividad" of Spain through reference No. DI-15-08100.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Correlation between objective and subjective assessment of noise barriers

  • Redondo, Javier|||0000-0002-5507-7799
  • Llinares Millán, María Del Carmen|||0000-0003-2270-807X
  • Jose Maria Bravo|||0000-0002-8337-7385
  • Peiró-Torres, M.P.
  • Pereira, A.
  • Amado-Mendes, P.
[EN] There are several international standards that define the way to evaluate the attenuation capacity of noise reducing devices, by single-number quantities representing airborne sound insulation and insertion loss. These two single-value ratings define the quality and performance of acoustic barriers, the former being related to intrinsic and the latter to both intrinsic and extrinsic acoustic characteristics of the devices. However, not many studies can be found on whether these objective parameters correlate to the perception of annoyance reduction. The aim of the present work is to analyze the adequacy of these objective ratings to indicate the performance of noise barriers, by comparing their values with the perception of annoyance reduction. For this purpose, ninety individuals of two different nationalities (Spanish and Portuguese) were asked to rate the perceived annoyance reduction in a listening experimental test, in which they were exposed, under controlled conditions, to several environmental noises and acoustic screened stimuli simulated by audio filters. The obtained results show a high correlation between objective ratings and subjective annoyance perception, with a better correlation being observed for insertion loss single-number parameter than for the airborne sound insulation single-number rating. Furthermore, significant differences were found depending on the gender and nationality of the respondents. The results, from this ongoing research work, may be of great interest for future acoustic barriers design., This work has been financed by national funds through FCT Foundation for Science and Technology, I.P., within the scope of the R&D unit Institute for Sustainability and Innovation in Structural Engineering -ISISE (UIDP/04029/2020) and through the Regional Operational Programme CENTRO2020 within the scope of the project CENTRO-01-0145-FEDER-000006 (SUSpENsE). Also this work has been supported by the Ministerio de Ciencia, Innovacion y Universidades, Spain, under grant RTI2018-096904B-I00. M.P.P.T. is grateful for the support of pre-doctoral Grant by the Ministerio de Economia y Competitividad of Spain through reference No. DI-15-08100.