Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of complete compressor map using a multi-fidelity approach with low requirements of input working points.

  • Galindo, José|||0000-0001-6068-182X
  • Dolz, Vicente|||0000-0003-1511-6957
  • Navarro, Roberto|||0000-0003-2587-4954
  • Pallás-Cervera, Borja
[EN] Usual methods for characterizing turbomachinery performance maps often require a significant number of input working points. This constraint limits the scope of CFD optimization and parametric studies, which cannot be extended to the whole map due to the computational burden. This work develops multi-fidelity surrogates for pressure ratio and isentropic efficiency. For pressure ratio, a co-Kriging approach is selected, which employs Leufven's method calculated with the input data as low-fidelity. For efficiency, the surrogate focuses on representing power losses relative to the isentropic power, which acts as the low-fidelity model. The proposed multi-fidelity surrogates are found to be much more robust than the literature standards, achieving RSME values below 3 % for pressure ratio and 5 % in terms of efficiency even when reducing the number of input points to a limited set (11 points)., Project supported by the "Agencia Valenciana de la Innovacio" and the European Regional Development Fund 2014-2020: INNEST/2021/221. Borja Pallas was supported by "Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital de la Generalitat Valenciana DOCEMPR UPV program" from the regional government, Generalitat Valenciana co-funded by the European Social Fund (DOCEMPR22) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysing the Predictability of Language Model Performance

  • Schellaert, Wout Willy M.
  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Hernández-Orallo, José|||0000-0001-9746-7632
[EN] Can a language model predict for which questions another language model will answer successfully? We investigate the extent to which performance prediction is possible and dissect various factors that influence it. Our experimental setting fine-tunes DeBERTa models, which we call assessors, on the evaluation results of generative language models with up to 128 billion parameters, which we refer to as subject systems. Our analysis spans more than 100 tasks from BIG-bench. We find that the assessors can match and even exceed the subjects' confidence in both refinement and calibration, anticipating failures at near perfect levels for some tasks. We also find that for performance prediction it can be beneficial to learn from the scores on multiple tasks or to learn from the scores of multiple subjects, but both depend on the task at hand. Lastly, we find that large and small subject systems are equally predictable, showing promise for the scalability of the predictability problem., This work was funded by valgrAI, the Future of Life Institute (FLI) under grant RFP2-152, the EU (FEDER) and Spanish grant RTI2018-094403-B-C32 funded by MCIN/AEI/10.13039/501100011033 and by CIPROM/2022/6 funded by Generalitat Valenciana, FISCALTICS (I+D+i PID2022-140110OA-I00) granted by MICIU/AEI/10.13039/501100011033, the Spanish grant PID2021-122830OB-C42 (SFERA) funded by MCIN/AEI/10.13039/501100011033 and 'ERDF A way of making Europe, as well as the European Union under agreement INNEST/2021/317 (Neurocalcat) and by the Vic. Inv. of the Universitat Politecnica de Valencia under DOCEMPR21, DOCEMPR22, and DOCEMPR23'.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Larger and more instructable language models become less reliable

  • Zhou, Lexin
  • Schellaert, Wout Willy M.
  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Moros-Daval, Yael
  • Ferri Ramírez, César|||0000-0002-8975-1120
  • Hernández-Orallo, José|||0000-0001-9746-7632
[EN] The prevailing methods to make large language models more powerful and amenable have been based on continuous scaling up (that is, increasing their size, data volume and computational resources1 ) and bespoke shaping up (including post-fltering2,3 , fne tuning or use of human feedback4,5 ). However, larger and more instructable large language models may have become less reliable. By studying the relationship between difculty concordance, task avoidance and prompting stability of several language model families, here we show that easy instances for human participants are also easy for the models, but scaled-up, shaped-up models do not secure areas of low difculty in which either the model does not err or human supervision can spot the errors. We also fnd that early models often avoid user questions but scaled-up, shaped-up models tend to give an apparently sensible yet wrong answer much more often, including errors on difcult questions that human supervisors frequently overlook. Moreover, we observe that stability to diferent natural phrasings of the same question is improved by scaling-up and shaping-up interventions, but pockets of variability persist across difculty levels. These fndings highlight the need for a fundamental shift in the design and development of general-purpose artifcial intelligence, particularly in high-stakes areas for which a predictable distribution of errors is paramount., We acknowledge support from the following institutions: Long-Term Future Scholarship funded by Open Philanthropy; Grant for Master Studies funded by ValgrAI Valencian Graduate School and Research Network for Artificial Intelligence and Generalitat Valenciana; FISCALTICS (I+D+i PID2022-140110OA-I00), funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU; CIPROM/2022/6 (FASSLOW) and IDIFEDER/2021/05 (CLUSTERIA) funded by Generalitat Valenciana; the EC H2020-EU grant agreement no. 952215 (TAILOR); US DARPA HR00112120007 (RECoG-AI) and Spanish grant PID2021-122830OB-C42 (SFERA) funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe ; and the Vic. Inv. of the Universitat Politècnica de Valencia under DOCEMPR21, DOCEMPR22 and DOCEMPR23.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Gated Nanosensor for Sulphate-Reducing Bacteria Detection

  • López-Palacios, Alba|||0000-0002-4397-277X
  • Morella-Aucejo, Ángela|||0000-0002-6357-949X
  • Moreno Trigos, Mª Yolanda|||0000-0003-3688-5157
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
  • Bernardos Bau, Andrea|||0000-0002-3842-5771
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Aznar, Elena|||0000-0003-0361-3876
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Hernández-Montoto, Andy|||0000-0001-5623-9836
  • Ponz-Carcelén, Román
  • Pedro-Monzonís, María
[EN] Desulfovibrio vulgaris is an anaerobic microorganism belonging to the group of sulphate-reducing bacteria (SRB). SRB form biofilms on metal surfaces in water supply networks, producing a microbiologically influenced corrosion (MIC). This process produces the deterioration of metal surfaces, leading to high economic costs and different environmental safety and health problems related to its chemical treatment. For that reason, rapid and accurate detection methods of SRB are needed. In this work, a new detection system for Desulfovibrio has been developed using gated nanoporous materials. The probe is based on hybrid nanoporous alumina films encapsulating a fluorescent molecule (rhodamine B), whose release is controlled by an oligonucleotide gate. Upon exposure to Desulfovibrio's genomic material, a movement of the oligonucleotide gatekeeper happens, resulting in the selective delivery of the entrapped rhodamine B. The developed material shows high selectivity and sensitivity for detecting Desulfovibrio DNA in aqueous buffer and biological media. The implementation of this technology for the detection of Desulfovibrio as a tool for monitoring water supply networks is innovative and allows real-time in situ monitoring, making it possible to detect the growth of Desulfovibrio inside of pipes at an early stage and perform timely interventions to reverse it., This research was supported by project PID2021-126304OB-C41 and PID2021-128141OB-C22 funded by MCIN/AEI/10.13039/501100011033/ and by European Regional Development Fund-A way of doing Europe. The work was also supported by Generalitat Valenciana (CIPROM/2021/007), Agencia Valenciana de la Innovacio (INNEST/2021/169, Universitat Politecnica de Valencia; INNEST/2021/174, Global Omnium) and is susceptible to be co-founded by European Union. This research was supported by CIBER-Consorcio Centro de Investigacion Biomedica en Red- (CB06/01/2012), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. A.L. thanks to the Ministerio de Universidades for her predoctoral grant (FPU20/05297). A.M.-A. thanks to the Universitat Politecnica de Valencia (UPV) for her Ph.D. grant (DOCEMPR22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Natural antimicrobials synergistically coupled with nanomotors: An innovative strategy for biofilm eradication

  • Medaglia, Serena|||0000-0003-3537-9842
  • Escudero-Noguera, Andrea|||0000-0003-2670-6127
  • Morella-Aucejo, Ángela|||0000-0002-6357-949X
  • Hicke-García, Francisco Javier|||0000-0002-8419-0467
  • Reyes-Torres, Miguel|||0000-0003-4751-2698
  • Bernardos Bau, Andrea|||0000-0002-3842-5771
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Marin-Ferrandis, Lucia
  • Amorós, Pedro
  • Marcos, MD
  • Diez-Sánchez, Paula
[EN] Biofilms are one of the most important problems occurring in industrial environments, especially in food industry. The possibility of foodborne disease outbreaks as a result of biofilm-food cross-contamination is a distinct concern, along with the substantial costs associated with food spoilage and biofilm control. Besides, despite daily cleaning and disinfection, many bacteria grow in machines and surfaces in food processing plants, some of them forming biofilms. A promising procedure for disinfection and biofilm elimination could be the use of hybrid antimicrobial nanomaterials endowed with motion (i.e., nanomotors). Herein, we report Janus nanoparticles based on the conjunction of platinum and mesoporous silica nanoparticles, functionalized with a derivative of a natural antimicrobial compound, vanillin. The engineered nanomotors combine H2O2-triggered self-propulsion with the antimicrobial activity of vanillin, allowing enhanced physical penetration into the 3D matrix formed by the exopolymeric substances generated in monospecies (Staphylococcus aureus) and multispecies (S. aureus and Escherichia coli) biofilms and the subsequent elimination of pathogenic cells., The Spanish Government (projects PID2021-126304OB-C41, PID2021-128141OB-C22 and TED2021-132114B-I00, MCUI/FEDER, EU and CIBER-Consorcio Centro de Investigacion Biomedica en Red (CB06/01/2012) , Instituto de Salud Carlos III, Ministerio de Ciencia Innovacion) and the Generalitat Valenciana (CIPROM/2021/007) funded this research. This work was also supported by the European Research Council (ERC) via Advanced Grant (101,052,997, EDISON) . This study formed part of the Advanced Materials program (MFA/2022/053) and the AGROALNEXT program (AGROALNEXT/2022/032) , supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17 & sdot;I1) and by Generalitat Valenciana. S.M. thanks the Generalitat Valenciana for her Grisolia fellowship (GRISOLIAP/2018/149) . A<acute accent>.M.-A. thanks the Universitat Politecnica de Valencia (UPV) for her Ph.D. grant (DOCEMPR22) . F.J.H thanks Ministerio de Universidades (MIU, Spanish Government) for his FPU grant (FPU20/06021) . M.R.-T. thanks MIU for his FPU grant (FPU21/03142) . A.B. thanks the MIU for her Beatriz Galindo contract (BG20/00020) . P.D.thanks the Instituto de Salud Carlos III and the European Social Fund for financial support "Sara Borrell" (CD20/00120) and "Miguel Servet" (CP24/00043) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Chemical characterization and encapsulation of &lt, i&gt, Ganoderma pfeifferi&lt, /i&gt, extract with cytotoxic properties

  • Stastny, Jan
  • Skala, Tomas
  • Marsik, P.
  • Lerida-Viso, Araceli
  • Matejka, Jaroslav
  • Mascellani Bergo, Anna
  • Marcos, María Dolores
  • Jablonsky, Ivan
  • Kloucek, Pavel
  • Morella-Aucejo, Ángela|||0000-0002-6357-949X
  • Bernardos Bau, Andrea|||0000-0002-3842-5771
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
[EN] Mushrooms of the genus Ganoderma are known for diverse biological activities, demonstrated both traditionally and experimentally. Their secondary metabolites have shown cytotoxic potential across different cancer cell lines. Besides exploration of the most active components in different species or genotypes, new formulation techniques are in development. In recent years, there has been a growing interest in the use of nanomaterials because of significant potential for pharmacology applications as substance carriers. Applying nanoparticles may enhance the medicinal effect of the mushroom substances. This study investigated the cytotoxic properties of Ganoderma species methanolic extracts against the HeLa cancer cell line. Notably, the extract obtained from Ganoderma pfeifferi demonstrated the highest activity and was further used for encapsulation within synthesized mesoporous silica nanoparticles MCM-41. Subsequently, the cytotoxic effect of the loaded MCM-41 to the free form of extract was compared. The obtained results indicate successful encapsulation, and similar activity comparing encapsulated form to free extracts (IC50 16.6 mu g/mL and 20.5 mu g/mL, respectively). In addition, the four unique compounds were identified as applanoxidic acid A, applanoxidic acid G, ganoderone A, and ganoderone B in the G. pfeifferi. This study is an essential prerequisite for further steps like nanoparticle functionalization for sustained or on-command delivery of these natural extracts., The author(s) declare that financial support was received for the research, authorship, and/or publication of this article. This work was funded by the National Agency for Agricultural Research of the Ministry of Agriculture of the Czech Republic under project number QK1910209; by the Research Infrastructure METROFOOD-CZ supported by the Ministry of Education, Youth, and Sports of the Czech Republic under project number LM2023064). This research was supported by projects PID 2021-126304OB-C41 and PID 2021- 128141OB-C22 funded by MCIN/AEI/10.13039/501100011033/and by European Regional Development Fund- A way of doing Europe. This study was also supported by Generalitat Valenciana (CIPROM/2021/007). This research was supported by CIBER-Consorcio Centro de Investigacion Biomedica en Red- (CB06/01/2012), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. A.M.-A. thanks to the Universitat Politecnica de Valencia (UPV) for her Ph.D. grant (DOCEMPR22). AB. thanks the MCIN for her BG20/00020 contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Antimicrobial Surfaces: Stainless Steel Functionalized with the Essential Oil Component Vanillin

  • Medaglia, Serena|||0000-0003-3537-9842
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Villaescusa Alonso, Luis Angel|||0000-0002-2720-3217
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
  • Bernardos Bau, Andrea|||0000-0002-3842-5771
  • Morella-Aucejo, Angela
  • Ruiz Rico, María
  • Martínez-Manez, Ramón
[EN] Pathogenic microorganisms can adhere to solid surfaces, leading to the formation of biofilms, thus building a physical barrier hindering the penetration and diffusion of antimicrobial compounds. In this context, the use of natural antimicrobial compounds, such as essential oil components, as substitutes for common synthetic antimicrobials in the fight to prevent antimicrobial resistance is explored. As stainless steel is one of the most widely used surfaces in different industries, we have developed an innovative antimicrobial treatment for stainless steel surfaces based on a multi-step functionalization process, in which the stainless steel surface is coated with a silica layer to which a vanillin derivative is covalently attached. The surface was analyzed by microscopy studies, indicating the correct immobilization on the surfaces. Antimicrobial studies (viability and bacterial adhesion assays) were performed against the bacteria Staphylococcus epidermidis, which is one of the most frequent causes of nosocomial infections. The results of the microbiological studies showed that vanillin-functionalized stainless steel surfaces reduce the bacteria viability by 100% and the biofilm formation on the stainless steel surface by 75% compared with non-functionalized surfaces, highlighting the contact-killing and adhesion resistance properties of the developed surface. Additional cycles using the functionalized surfaces showed good maintenance of the antimicrobial coating efficacy. Moreover, the surfaces coated with an intermediate silica layer demonstrated much greater antimicrobial activity than surfaces in which the active molecule was directly functionalized on the stainless steel surface., This research was supported by the projects PID2021-126304OB-C41 and PID2021-128141OB-C22, funded by the MCIN/AEI/10.13039/501100011033/ and by the European Regional Development Fund-A way of doing Europe. This study was also supported by the Generalitat Valenciana (CIPROM/2021/007). This research was supported by the CIBER-Consorcio Centro de Investigacion Biomedica en Red-(CB06/01/2012), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. This study formed part of the Advanced Materials program (MFA/2022/053) and was supported by the MCIN, with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by the Generalitat Valenciana. This study formed part of the AGROALNEXT program (AGROALNEXT/2022/032) and was supported by the MCIN, with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by the Generalitat Valenciana. This study formed part of the THINKINAZUL program (THINKINAZUL/2021/004) and was supported by the MCIN, with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by the Generalitat Valenciana. This research was also supported by the European Union's Horizon 2020 Research and Innovation Programme under Grant Agreement No. 814607 (SAFE-N-MEDTECH project). S.M. thanks the Generalitat Valenciana for her Grisolia fellowship (GRISOLIAP/2018/149). & Aacute;.M.-A. thanks the Universitat Politecnica de Valencia (UPV) for her Ph.D. grant (DOCEMPR22). A.B. thanks the MCIN for her BG20/00020 contract and her PAID-PD-22 project funded by the UPV.